Change-Id: Ibcfdc08c9aac02fe263afd629fc262f71da80e9a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/8695
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I1535fea97c676ed6465d777f444b0a1a0e023474
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/8694
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Almost all of the code between x86 and x64 can be shared, so select it for
either architecture.
Change-Id: I681149ed7698c08b702bb19f074f369699cef1bf
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/8693
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I81f6d8a21ea0d8218f5a4aab2feb39be32f88e01
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/8692
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The smbus.asl operation regions prevent the Linux i2c driver (i2c_piix4)
for this chipset from claiming the ioport ranges and thus it fails to
load.
The methods defined in smbus.asl are not used in the DSDT and also don't
exist in the DSDT of the vendor firmware.
In particular due to the following check in i2c-piix4.c will fail unless
acpi_enforce_resources=no is explicitly set on the Linux kernel
parameters:
if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
return -ENODEV;
Depending on kernel options the only error message printed is
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0B (\SMB0) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
However since it does not implement a standard interface there is no
native ACPI driver for smbus.asl.
Change-Id: Id8401e8b36f0e2412d490a92c20540a04d853125
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: http://review.coreboot.org/10539
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The same values are used on my Lenovo R400 as reported by Francis Rowe
from his T400 and T500.
TEST: Read /proc/asound/card0/codec#0, see that the jack locations
correspond to the board layout, e.g. headphone and microphone
connectors are on front of the laptop, not right. Read
/sys/class/sound/hwC0D0/init_pin_configs, see that it has the same
content as with factory firmware.
Change-Id: I60e914ca9fab4bb2c99b4ed9e6d81a0580a88b18
Signed-off-by: Michał Masłowski <mtjm@mtjm.eu>
Reviewed-on: http://review.coreboot.org/10431
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Commit 8d80a3fb (ASRock DSDT: Split the ASRock DSDT) creates the file
`acpi/smbus.asl` in the board directory, but includes the identical
southbridge file in `dsdt.asl`.
So, the file is actually unused. Therefore remove it.
Change-Id: I26c5a2eaf3822d37da2402da65b278a3ee6d42f0
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10544
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
It's not used outside of very old AMD CPUs.
Change-Id: Ide51ef1a526df50d88bf229432d7d36bc777f9eb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10538
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Add the Google Auron Broadwell Reference Mainboard. It is based
on the Google Peppy mainboard. It was merged from the following
chromium.org commit: d20a1d1a22d64546a5d8761b18ab29732ec0b848
Change-Id: I716a79e198e91c428bd965fcd03665c2c7067602
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10500
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Kern is the southbridge of AMD Merlin Falcon(Carrizo).
This add support of HD audio, lpc, sata and usb for Kern.
Change-Id: Ie47e38bc1099cdb72002619cb1da269f3739678b
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10418
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds the AMD Family 15h model 60h CPU.
S3 suspend/resume currently is not supported.
Tested on the amd/bettong platform.
Change-Id: I5dea55a5664d29c07a54937ed1e5c2f84715d8ea
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10417
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of having three copies of amdlib, the glue code for Agesa,
let's share the code between all implementations (and come up with
a versioned API if needed at some point in the future)
Change-Id: I38edffd1bbb04785765d20ca30908a1101c0dda0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10507
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Add all of the PI source that will remain part of coreboot to
build with a binary AGESA PI BLOB. This includes the gcc makefiles,
some Kconfig, and the AGESA standard library functions.
Change vendorcode Makefile and Kconfig so that they can compile
AMD library files and use headers from outside the coreboot/src
tree.
Change-Id: Iad26689292eb123d735023dd29ef3d47396076ea
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10416
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds support for the Fintek F81866AD-I SuperIO,
which is very similar to the fintek/f81865f.
This code adds some fan control support, inspired by fintek/f71869ad.
Furthermore its possible to change the temp sensor type (thermistor or diode).
Datasheet: Name: F81866D/A-I, Release Date: Jan 2012, Version: V0.12P
Link: http://www.alldatasheet.com/datasheet-pdf/pdf/459085/FINTEK/F81866AD-I.html
Change-Id: Id2fc1119b37142f8101f71908e394ee69c45041d
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: http://review.coreboot.org/10287
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Initialization for the Winbond W631GG6KB part using Synopsys
DDR uMCTL and DDR Phy.
This code adds a separate function for DDR3 initialization
and moves all the necessary defines in a separate header file.
The programming procedure that is executed at power up to bring
up the uMCTL, PHY and memories into a state where reads and
writes to the memory can be performed is the following:
1. uPCTL (Universal DDR protocol controller) initialization
The timining registers TOGCNT1U, TINIT, TOGCNT100N and TRSTH
needed for driving the memory power-up sequence are programmed
as a function of the internal timers clock frequency.
Organization (memory chip specific) values are set
(column/bank/row address width and number of ranks), together
with other static values (latency, timing, power up configuration).
All these values are static, provided by the datasheet,
being determined by the memory type, size and frequency.
2. PHY initialization
The PHY is programmed with datasheet provided values,
specifying the initialization values for it to send to the
external memory (timing parameters).
Also, delay lines (DLL) and strength of drive pads are
calibrated (based on external conditions: temperature,
voltage, noise) and locked. After that, the PHY goes
through a trainig process (also dependent on the
current conditions at boot time) to establish precise
timing configuration between the DDR clock and DQS (data strobe)
and between DQS and DQ (data).
3. Memory power up
4. Switch from configuration state to access state.
It was tested on Pistachio bring up board where DDR was initialized
properly and ramstage executed correctly
Change-Id: I3bcbce2044327a22fce09b184d85ee11228a6b2b
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: http://review.coreboot.org/10529
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Switching from active windowing DQS gating scheme to
passive windowing mode resolves boot stability issues
on chips found to have memory corruption issues during
boot or memory tests.
It was tested on Pistachio bring up board where DDR is
initialized properly and ramstage executed correctly;
We have cycled units over 12,000 times with no boot errors.
This option was chosen over the alternative of using
passive windowing mode for DQS training and after switching
back to active mode, as this option was recommended by
Synopsys. Using the alternative would give different
timing values during training that were not longer accurate
during normal activity.
Change-Id: Ie604eddc0a9a982b2f89198f44deb88a01b7b322
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: http://review.coreboot.org/10528
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix by checking the actual function return value (the search
address pointer), rather than the search length value (which isn't
guaranteed to be sane or useful).
Change-Id: I226c635ddbbc916b02494fcd97df27d141cc2c7f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: http://review.coreboot.org/10516
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Commit 899d13d (cbfs: new API and better program loading) broke
panther's lan init when no vpd.bin present from which to read
the MAC address. Fix this by checking the validity of the search
address pointer, rather than the search length.
Change-Id: I8c7ca410d8ce5c5d92242a21c4c2ff4c001a68bd
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: http://review.coreboot.org/10509
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The proper log level for any given printk statement is up to the
interpretation of the developer. This results in console output with
somewhat inconsistent levels of verbosity. This patch clearly defines each
log level and its use case, hopefully resulting in less ambiguity for
developers.
The concern with this patch might be that it leaves a lot of preexisting
printk statements using a log level that is inconsistent with the
description. I think that *most* statements map to these extended
definitions very nicely. The most discrepancies are between debug and
spew, but I'm willing to say that 95% of statements with a level lower than
debug are correct by these definitions.
There was some discussion dating back to 2010 on the mailing list about
renaming these constants to lose the 'BIOS_' prefix and to consolidate
some of them into a single constant. I disagree that it is necessary
to merge any of them, I think they all have unique use cases. But I do
think that if you all agree with these definitions, it might be useful to
rename them to reflect their use cases.
I also will add that I believe removing BIOS_NEVER is a good idea. I do
not see the use case, and it's used in only 4 files.
Change-Id: I8aefdd9dee4cb4ad2fc78ee7133a93f8ddf0720b
Signed-off-by: Nicky Sielicki <nlsielicki@wisc.edu>
Reviewed-on: http://review.coreboot.org/10444
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
It's derived from EEPROM on Lenovo machines and not from user config
which is ignored.
Change-Id: I54fb76a3160e47cd36d33d2937c4bfaddcd36a69
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7055
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
This change adds cache management after loading stages.
Before jumping to a new stage we should flush the data
caches to memory and invalidate instruction cache.
After all segments are loaded CBFS cache is also
flushed.
With this change all stages of coreboot are now executed
successfully. This was tested on Pistachio bring up board,
also known as Urara.
Change-Id: I86e07432c21a803ef1cfc41b633c5df42b99de90
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: http://review.coreboot.org/10456
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The coreboot table address is passed as an argument when jumping
to payload.
With this change depthcharge is loaded and executed properly on urara.
Change-Id: I230d474a91b8d38aff070aa4aac623b6c8f0809c
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: http://review.coreboot.org/10460
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Place included header files in alphabetical order.
Change-Id: Ice23178d1f07e2cb0178efbc7ce487d54bf3f708
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: http://review.coreboot.org/10459
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Use cbmem_initialize_empty() after DDR configuration so that
cbmem is always initialized from scratch on each boot.
Change-Id: Ic9ca34867b26aab82cf3154280694b6fb61ee11f
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: http://review.coreboot.org/10458
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
sata.asl and superio.asl are empty files. Remove them.
Change-Id: Icd3e990aa713281e46dcbd8e0847166c77656b1c
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10505
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The default ordering for the base kconfig entries has the CPU
directory coming before the SOC directory, which means that the
values in the CPU Kconfig take precedence.
The first visible consequence of this is that CONFIG_SMM_TSEG_SIZE
will be set to 0 on all SOC implementations.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados
Change-Id: Ifd56a2ceb73ab335a86126e48d35ff4c749990ac
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0cddae37d3de1cbf3dd6afcf4a0707b7af9436fa
Original-Change-Id: I98e3bf249650b50667dde62b6be9c1bf587ad0b2
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/276189
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10478
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Copy the Peppy directory. No changes.
Change-Id: I3fa382eaa40f642df8bc09ab69be67cbe9f3671a
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10499
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The type1 family setting from chromium was mis-merged into the
type2 function. Move it to the correct type1 function.
Bad commit: 51bdc47816
Change-Id: I72e6ef80bbf185a39fcf169c8247dc16462e6bc3
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10498
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The type of a resource is really an enumeration but our implementation
is as a bitmask. Compare all relevant bits and remove the shadowed
declarations of IORESOURCE bits.
Change-Id: I7f605d72ea702eb4fa6019ca1297f98d240c4f1a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8891
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
No board in the tree selects this and it looks like the implementation
was done at chipset level while it should be part of PCI subsystem.
When enabled, at least AMD K8 and f14, f15tn and f16kb fail build test.
Feature of placing prefetchable PCI memory above 4GB may not work if
there is any 32-bit only prefetchable PCI BARs in the system.
Change-Id: I40ded2c7d6d05f461423721aa5d78a78f9f9ce1e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8705
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On modern mainboards with multiple PCI-e devices and a single
graphics card the default MMIO hole size of 512M is inadequate,
leading to resource-hungry PCI-e devices (such as an external
graphics card) being assigned invalid MMIO ranges. This, in
turn, causes the entire PCI subsystem to become unavailable,
leading to a failure to boot.
TEST: Booted KGPE-D16 with NVIDIA 7300LE and verified proper
operation of PCI/PCI-e devices, including text mode VGA operation
via the add-on card and its VGA option ROM.
Change-Id: I8d25f4b19f2d0860644ab1ee002c15041437121f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/10428
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
For console drivers which use udelay() we can deadlock
in the printk path on the spinlock. The reason is that
on the first call to udelay() from within a console driver
it will go back down the printk() path deadlocking oneself.
Just remove the printk() as it was asymmetric on romstage
vs ramstage.
Change-Id: I30fe7d6e5b4684f17d4f353c0816b64f9242de0a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10483
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This change is necessary to support future additions to romstage.
Change-Id: Ibb69994847945c7adbafbf2bc677b33821df8146
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: http://review.coreboot.org/10457
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Instead of having the chipset code make the approrpiate
calls at the appropriate places use the cbmem init hooks
to take the appropriate action. That way no chipset code
needs to be changed in order to support the external
stage cache.
Change-Id: If74e6155ae86646bde02b2e1b550ade92b8ba9bb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10481
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It can be helpful to certain users of the cbmem init hooks
to know if recovery was done or not. Therefore, add this
as a parameter to the hooks.
Change-Id: I049fc191059cfdb8095986d3dc4eee9e25cf5452
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10480
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
