Reset the s2891 so the HT speed gets updated.
Remove some PANTA comments.
Add SATA init from non-CAR version.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4771 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It's an embedded AMD 690/SB600 mainboard with a Mobile Sempron CPU.
Issues with this port:
- hangs early during "Starting Windows" with Windows 7, after loading all the
drivers
- sound is untested and probably not working
- powernow seems to be not working
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4764 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to kconfig.
Hook it up to kbuildall, too
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4761 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Abuild-tested for the boards that are touched.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4760 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Add "select HAVE_ACPI_TABLES" for boards which need it.
- Drop sections which set HAVE_ACPI_TABLES to 'n', that's the default.
- Convert sections which set HAVE_ACPI_TABLES to 'y' to the
shorter "select HAVE_ACPI_TABLES".
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4759 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on QEMU.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4757 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
There is an i2c mux out there. We found it using a user level program
that, as usual, began by inverting all gpios until we found out
what we needed to know. In the end, we just set up the GPIOs as
the factory bios does.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4755 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Check the return value. Minor formatting and LAR -> CBFS.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4752 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
or not still depends on how close the configuration
options are to what they should be.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4751 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
for amd/socket_AM2R2, amd/socket_939, drivers/ati/ragexl
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4750 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Use "default n" for all components that shall be "select"ed.
- Use "0x0" instead of "0" for hex variables for clarity and to reduce
the risk of people passing integer instead of hex values to such variables.
- Add TODO comments for boards that have irq_tables.c but don' set
CONFIG_HAVE_PIRQ_TABLE = 1. Someone with the hardware should test enabling.
- ASUS M2V-MX SE doesn't have irq_tables.c so don't define
IRQ_SLOT_COUNT in its Kconfig file.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4749 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4748 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
variables being set incorrectly.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4747 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
failover.inc MUST come after enable_sse or your CPU will hang.
> Can you say why?
yes. if you compile failover.c with romcc options that include sse,
then you'll see code like this in failover.inc:
mov eax, %xmm0
This will hang if you have not first enabled sse.
Verified yesterday on the dell s1850.
>
> Does it hang in the SSE code or in the failover code?
It will hang in failover code, if that code was compiled with sse enabled
AND if the sse registers are used.
>
> Does this mean that failover requires SSE in order to work?
It may or it may not.
But if you compile it with romcc options that include sse,
and it uses sse without sse being enabled, it will hang.
This is a particularly nasty bug in that the failover code is not
guaranteed to compile in a way that sse is used, even if sse is
enabled; hence, this could be very hard to catch.
I'm lucky this bug appeared as soon as it did.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4746 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
with this as many boards (AMD in particular) use CAR.
This list determined by a series of greps etc. on mainboards, no humans
were harmed in the making of this list.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4745 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
their own vgabios.c
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4744 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4742 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Fam10 doesn't build due to size constraints at this time.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4741 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to be run AFTER SSE is set up. I just had this problem cause a failure
today.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4740 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
and PIRQ tables were actually wrong, I cannot imagine they ever
worked properly.
- Use CONFIG_IRQ_TABLE_COUNT in all irq_tables.c files instead of
hard-coded numbers.
- Make all CONFIG_IRQ_TABLE_COUNT values in irq_tables.c match Options.lb.
- Make all CONFIG_IRQ_TABLE_COUNT values match the actual number of entries
in the irq_tables.c file.
- Set all CONFIG_IRQ_SLOT_COUNT values in src/.../Options.lb for those
boards where they were set to 0 (in order to be overridden in
the respective targets/.../Config.lb).
This is mainly done to aid Patrick's scripts for kconfig conversion.
- Fix a number of comments in irq_tables.c files.
- Drop CONFIG_IRQ_SLOT_COUNT usage from boards that don't have irq_tables.c:
- tyan/s1846
- asus/a8v-e_se
- asus/m2v-mx_se
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4739 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Update the code to support that too.
Remove an unused variable.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4738 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4737 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add some more enables to the s1850.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4736 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, drop per-board CONSOLE_VGA/PCI_ROM_RUN while I'm at it, they're
global options in kconfig.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4735 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Add helps texts to multiple user-visible Kconfig options.
- Improve some menu and option names.
- PAYLOAD_NONE should come before PAYLOAD_ELF, so that you scroll down
(instead of up) when changing "no payload" to "ELF payload" (more
intuitive, IMHO).
- s/cbfs/cbfstool/.
- Add some TODO items where needed.
- Put GDB_STUB in a "Debugging" menu, no options should be top-level.
There'll be more debug options later, I'm pretty sure.
- Start converting help texts which are not user-visible to #-comments.
- Re-order some options for more intuitive menus.
- Set ARCH_X86 and ARCH_POWERPC to "default n", each boards selects them.
- "Maximum reboot count" should proabably not be user-selectable, or at
most if CONFIG_EXPERT (yet to be added) is enabled. It does definately
not need its own "Misc options" menu.
- Set PCI_ROM_RUN and VGA_ROM_RUN to "default y", most users will want to
run option ROMs.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4734 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4731 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
ROMCCFLAGS, so boards can override it where necessary.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4730 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
select UDELAY_TSC
select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
for all 440BX and i810 boards as per Options.lb.
The UDELAY_IO / TSC / LAPIC / HPET setup will probably be checked
and improved later when the kconfig transition is done. For now
we keep the same values as in Options.lb.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4729 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
complete set of variables now, though they might still have
the wrong values.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4728 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on QEMU.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4726 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
are not needed for building coreboot.
The website tells you where to get them individually.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4725 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Libra Li