Commit Graph

226 Commits

Author SHA1 Message Date
Vadim Bendebury 052b7fec07 Enable publishing of board ID where supported
These boards are supposed to be able to determine the board ID at run
time based on GPIO settings.

BUG=chrome-os-partner:30489
TEST=verified that all boards build. Checked that storm proto0 reports
     board ID of 0 on the console

Original-Change-Id: Iadd758a799d69e1e34579d7d495378856b64c45b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210119
(cherry picked from commit f4d41ddf906c1bf0d10da38011998fa0a630c332)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>

Change-Id: I0d5f94d3428157a70f0a9d711b57432e3f796733
Reviewed-on: http://review.coreboot.org/8722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-23 17:20:24 +01:00
Vadim Bendebury b0c302fd79 Publish the board ID value in coreboot table, when configured
Board ID value is usually of interest to bootloaders. Instead of
duplicating the board ID discovery code in different bootloaders let's
determine it in coreboot and publish it through coreboot table, when
configured.

BUG=chrome-os-partner:30489
TEST=none yet

Change-Id: Ia1e36b907ac15b0aafce0711f827cb83622e27bb
Original-Change-Id: Iee247c44a1c91dbcedcc9058e8742c75ff951f43
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210116
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit b2057a02db9391e2085b138eea843e6bb09d3ea2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8719
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-23 17:20:13 +01:00
Vadim Bendebury 9c9c336464 Generalize revision number calculation function
Some platforms use tertiary interpretation of GPIO input state to
increase number of distinct values represented by a limited number of
GPIOs. The three states are

- external pull down (interpreted as 0)
- external pull up (1)
- not connected (2)

This has been required by Nvidia devices so far, but Exynos and
Ipq8086 platforms need this too.

This patch moves the function reading the tertiary state into the
library and exposes the necessary GPIO API functions in a new include
file. The functions are still supposed to be provided by platform
specific modules.

The function interpreting the GPIO states has been modified to allow
to interpret the state either as a true tertiary number or as a set
two bit fields.

Since linker garbage collection is not happening when building x86
targets, a new configuration option is being added to include the new
module only when needed.

BUG=chrome-os-partner:30489
TEST=verified that nyan_big still reports proper revision ID.

Change-Id: Ib55122c359629b58288c1022da83e6c63dc2264d
Original-Change-Id: I243c9f43c82bd4a41de2154bbdbd07df0a241046
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209673
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c79ef1c545d073eaad69e6c8c629f9656b8c2f3e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8717
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-23 17:20:04 +01:00
Paul Burton e8530033b8 arch/mips: Add base MIPS architecture support
Add the build infrastructure and basic architectural support required
to build for targets using the MIPS architecture. This is sufficient
to run on a simulator, but will require the addition of some cache
maintenance and timer setup in order to run on real hardware.

BUG=chrome-os-partner:31438, chromium:409082
TEST=none yet

Change-Id: I027902d8408e419b626d0aab7768bc564bd49047
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fcc0d934d7223922c878b1f87021cb5c2d7e6f21
Original-Change-Id: If4f99554463bd3760fc142477440326fd16c67cc
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207972
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8760
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-21 16:56:59 +01:00
Timothy Pearson 17ada2e039 Kconfig: Add MAX_REBOOT_CNT description
Change-Id: Ie28812a84bd063d097e23294b8588f974a3a19e9
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8725
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-20 22:09:34 +01:00
Timothy Pearson 447240808c lib: Add Kconfig option to enable/disable auto fallback control
Under certain conditions, e.g. automated testing, it is useful
to have the payload (e.g. Linux) reset the reboot_bits CMOS
value.  This allows automated recovery in the case of coreboot
starting properly but the payload failing to start due to bad
configuration data provided by the coreboot image under test.

Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Change-Id: Ifc8f565f8292941d90b2e520cc9c5993b41e9cdd
Reviewed-on: http://review.coreboot.org/8698
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
2015-03-17 04:22:23 +01:00
Timothy Pearson f20c6e81fe nvram: Add option to reset NVRAM to default parameters on every boot
In specific configurations, such as homogeneous supercomputing systems,
changeable NVRAM parameters are more of a liability than a useful tool.
This patch allows a coreboot image to be compiled that will always set
the NVRAM parameters to their default values, reducing maintainance
overhead on large clusters.

Change-Id: Ic03e34211d4a58cd60740f2d9a6b50e11fe85822
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8446
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16 08:36:37 +01:00
Timothy Pearson adb5908dc8 payloads/seabios: Enable SeaVGABIOS option if native text init supported
SeaVGABIOS supports both the coreboot linear framebuffer and native EGA
text mode.  To use SeaBIOS interactively on standard VGA hardware a VBIOS
is needed; SeaVGABIOS is one such option.

TEST: Booted KFSN4-DRE with XGI Volari Z9s and SeaVGABIOS.  Was able to
interact with SeaBIOS and comboot menu, then booted Linux successfully.
VGA display was continuously usable from power on to Linux login.

Change-Id: Id4bd4cb5cece9114457633832c5f0e5280c02b47
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8368
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-12 04:41:39 +01:00
Kyösti Mälkki ae98e83eb2 CBMEM: Always use DYNAMIC_CBMEM
Drop the implementation of statically allocated high memory
region for CBMEM. There is no longer the need to explicitly
select DYNAMIC_CBMEM, it is the only remaining choice.

Change-Id: Iadf6f27a134e05daa1038646d0b4e0b8f9f0587a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7851
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27 22:54:32 +01:00
Kyösti Mälkki 2fb6b40ed0 CBMEM: Support DYNAMIC_CBMEM with LATE_CBMEM_INIT
We can now create CBMEM with dynamic allocation even if CBMEM
location is resolved late in ramstage.

Change-Id: I8529ccbcd4a0e567ebe0a46232ac5d16476e81a8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7861
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
2015-01-27 22:50:14 +01:00
Kyösti Mälkki 91fac61240 CBMEM: Tidy up CAR migration
Move the  CAR migration call to arch -specific part of CBMEM init,
it is truly a x86 specific thing.

Change-Id: I715417e54f197b8745e0670d6b900a5660178141
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7860
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
2015-01-27 22:47:35 +01:00
Kyösti Mälkki 3bf3854847 CBMEM: Tag chipsets with LATE_CBMEM_INIT
In preparation to remove the static CBMEM allocator, tag the chipsets
that still do not implement get_top_of_ram() for romstage.

LATE_CBMEM_INIT also implies BROKEN_CAR_MIGRATE.

Change-Id: Iad359db2e65ac15c54ff6e9635429628e4db6fde
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7850
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
2015-01-27 22:47:00 +01:00
Ronald G. Minnich 6d8228599b Allow RISCV to be compiled with ANY_TOOLCHAIN
Change-Id: I9210241c902ad8a88980a7c9cdb0d52c460b2541
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/8025
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
2015-01-02 18:44:57 +01:00
Vadim Bendebury adcb095e9e Provide a common CBFS wrapper for SPI storage
Coreboot has all necessary infrastructure to use the proper SPI flash
interface in bootblock for CBFS. This patch creates a common CBFS
wrapper which can be enabled on different platforms as required.

COMMON_CBFS_SPI_WRAPPER, a new configuration option, enables the
common CBFS interface and prevents default inclusion of all SPI chip
drivers, only explicitly configured ones will be included when the new
feature is enabled. Since the wrapper uses the same driver at all
stages, enabling the new feature will also make it necessary to
include the SPI chip drivers in bootblock and romstage images.

init_default_cbfs_media() can now be common for different platforms,
and as such is defined in the library.

BUG=none
TEST=manual
   . with this change and the rest of the patches coreboot on AP148
     comes up all the way to attempting to boot the payload (reading
     earlier stages from the SPI flash along the way).

Original-Change-Id: Ia887bb7f386a0e23a110e38001d86f9d43fadf2c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197800
Original-Tested-by: Vadim Bendebury <vbendeb@google.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 60eb16ebe624f9420c6191afa6ba239b8e83a6e6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>

Change-Id: I7b0bf3dda915c227659ab62743e405312dedaf41
Reviewed-on: http://review.coreboot.org/7932
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-30 19:29:47 +01:00
Kyösti Mälkki 87accccdc2 CBMEM: Always build for x86 romstage
Always build CBMEM for romstage, even for boards that will not use it.
We further restrict car_migrate_variables() runs to non-ROMCC boards without
BROKEN_CAR_MIGRATE.

This fixes regression of commit 71b21455 that broke CBMEM console support
for boards with a combination of !EARLY_CBMEM_INIT && !HAVE_ACPI_RESUME.

Change-Id: Ife91d7baebdc9bd1e086896400059a165d3aa90f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7877
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-30 17:47:22 +01:00
Edward O'Callaghan 63f6dc79db Revert "src/Kconfig: Don't treat warns as errors on Clang builds yet"
This reverts commit 9b63c9bde2.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Change-Id: I4f547d20c5096877b2010602a087e41702939f77
Reviewed-on: http://review.coreboot.org/7506
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
2014-12-29 04:06:29 +01:00
Vladimir Serbinenko 318e481e55 Kconfig: Remove ACPI_SSDTX_NUM.
Its scope is limited to a single mainboard and is only to go through ifdef.
Kill it and move the value to the code.

Change-Id: I76a87e2790d57dee8f37b51e33d0689fffd3a59d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7135
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-07 21:06:34 +01:00
Ronald G. Minnich e0e784a456 Add UCB RISCV support for architecture, soc, and emulation mainboard..
Works in the RISCV version of QEMU.

Note that the lzmadecode is so unclean that it needs a lot of work.
A cleanup is in progress.

We decided in Prague to do this as one thing, because it forms a nice case study
of the bare minimum you need to add to get a new architecture going in qemu.

Change-Id: If5af15c3a70733d219973e0d032746f8ab027e4d
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7584
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
2014-12-01 19:06:43 +01:00
Kyösti Mälkki eaee6e2d95 AMD: Move RAMBASE and RAMTOP
There are no reasons to not load ramstage @ 0x100000.

Boards with HAVE_ACPI_RESUME enabled have performance penalty in using
excessive RAMTOP. For these boards, this change releases 11 MiB of RAM from CBMEM allocation to OS.

Change-Id: Ib71995aba5e9332d0ec1626b3eb3b4ef6a506d1c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7094
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-14 15:46:57 +01:00
Vladimir Serbinenko 39bbc8cb97 Kconfig: Hide DYNAMIC_CBMEM.
Only one setting actually works (exact value depends on board). So
no need to show it.

Change-Id: I2a85719264bbac07791ef6a9279590ba768c309e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7359
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
2014-11-09 02:03:24 +01:00
Edward O'Callaghan 9b63c9bde2 src/Kconfig: Don't treat warns as errors on Clang builds yet
Currently clang/llvm builds are not fully supported. As such,
let us tone down treating errors as warnings until we actually
build the entire tree.

Change-Id: If7f90f9887e27250f5e6d73d1692505676be9d47
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7230
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
2014-10-28 23:02:28 +01:00
Isaac Christensen d2044ccdc0 reg_script: default to n for ARCH_X86
The reg_script functionality is only used by specific chipsets so have
it selected instead of defaulting to y for ARCH_X86.

Change-Id: I8fb9466e148eed7896ca8ed80755c77ba1190583
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7006
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-10-22 03:57:51 +02:00
Vladimir Serbinenko c21e07385f i945: Consolidate FADT code
Change-Id: I076cba7d21926cabf90d485de50268ae40c435f3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7087
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-18 10:35:38 +02:00
Stefan Reinauer 6023ca4970 Kconfig: move SMBIOS related options to SMBIOS table option
Change-Id: I74943d0248f49796b9d31d6ed827c69f8cea13a5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7090
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-17 14:37:13 +02:00
Stefan Reinauer 58470e39b3 Kconfig: clean up options in top level and device menu
Move generic options to the "General Setup" menu.
Move device specific options to the "Devices" menu.

Change-Id: I514a021305d43f026b24fd3016477300700ed401
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7089
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-17 14:36:53 +02:00
Vladimir Serbinenko a9db82fbaf smbios: Mark laptops as such
Change-Id: I179a4cede2f826f72a400208748798737216c01a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7071
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
2014-10-16 17:42:25 +02:00
Vladimir Serbinenko 822bc65b0e ACPI: Remove CONFIG_GENERATE_ACPI_TABLES
As currently many systems would be barely functional without ACPI,
always generate ACPI tables if supported.

Change-Id: I372dbd03101030c904dab153552a1291f3b63518
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4609
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-16 12:01:10 +02:00
Edward O'Callaghan a296f9e3d3 Kconfig: Allow native vga init to be selectable for SeaBIOS payload
Change-Id: I1508f3d3c56cb9afbf4a23355831549552a62866
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6891
Tested-by: build bot (Jenkins)
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-10-04 07:44:49 +02:00
Furquan Shaikh 2af76f4bdc coreboot arm64: Add support for arm64 into coreboot framework
Add support for enabling different coreboot stages (bootblock, romstage and
ramstage) to have arm64 architecture. Most of the files have been copied over
from arm/ or arm64-generic work.

Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/197397
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 033ba96516805502673ac7404bc97e6ce4e2a934)

This patch is essentially a squash of aarch64 changes made by
these patches:

d955885 coreboot: Rename coreboot_ram stage to ramstage
a492761 cbmem console: Locate the preram console with a symbol instead of a sect
96e7f0e aarch64: Enable early icache and migrate SCTLR from EL3
3f854dc aarch64: Pass coreboot table in jmp_to_elf_entry
ab3ecaf aarch64/foundation-armv8: Set up RAM area and enter ramstage
25fd2e9 aarch64: Remove CAR definitions from early_variables.h
65bf77d aarch64/foundation-armv8: Enable DYNAMIC_CBMEM
9484873 aarch64: Change default exception level to EL2
7a152c3 aarch64: Fix formatting of exception registers dump
6946464 aarch64: Implement basic exception handling
c732a9d aarch64/foundation-armv8: Basic bootblock implementation
3bc412c aarch64: Comment out some parts of code to allow build
ab5be71 Add initial aarch64 support

The ramstage support is the only portion that has been tested
on actual hardware. Bootblock and romstage support may require
modifications to run on hardware.

Change-Id: Icd59bec55c963a471a50e30972a8092e4c9d2fb2
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6915
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2014-09-23 18:10:32 +02:00
Edward O'Callaghan aca67ed0d2 payloads/external/SeaBIOS: Bump version to 1.7.5
Change-Id: Ie4b58b739ea411035b1801348e3e73e607299846
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6900
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-09-14 21:03:19 +02:00
Martin Roth 4d7d25f38a payloads/external/SeaBIOS: Allow setting buffers below 0xC0000
Add the option to coreboot to set the SeaBIOS buffers below 0xC0000.
This is a requirement on the Intel Rangeley processor
because it is designed so that only the processor can write
the higher memory areas.  This prevents USB and SATA from bus-mastering
into the buffers when they're set in the typical 0xE0000 area.

This will be set to Y unless defaulted to N by the mainboard or
chipset.

Push the SeaBIOS buffers down to 0x90000 segment for Mohon Peak

Change-Id: I15638605d1c66a2277d4b852796db89978551a34
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6364
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-12 23:16:29 +02:00
Gabe Black 51edd54738 ARM: Generalize armv7 as arm.
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.

Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>

ARM: Split out ARMv7 code and make it possible to have other arch versions.

We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.

The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.

Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)

Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.

Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
2014-09-08 18:59:23 +02:00
Vladimir Serbinenko 2d7bd8a6eb Implement ACPI in a per device way
This approach avoids having same basic tables 150-lines mantra over 100 times
in codebase.

Change-Id: I76fb2fbcb9ca0654f2e5fd5d90bd62392165777c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6801
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-09-05 22:53:26 +02:00
Vladimir Serbinenko f1d6e7e2cb Move baytrail-specific config to baytrail.
Stop polluting first screen of all boards.

Change-Id: I1ab88075722f7f0d63550010e7c645281603c9c3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6548
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-15 00:52:48 +02:00
Idwer Vollering ab11a6a94c payloads/external/SeaBIOS: move build directory
Move SeaBIOS' build directory out of build/
This allows the user to delete build/ in the top dir
and keep the built binary in payloads/external/SeaBIOS/seabios/out/

Change-Id: Ia7d515cd7e349beebcd9b62c9d956137acb73c82
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/6460
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-14 21:23:51 +02:00
Stefan Reinauer 7cb01e0bcf drivers: Add I2C TPM driver to coreboot
On ARM platforms the TPM is not attached through LPC but through I2C.
This patch adds an I2C TPM driver that supports the following chips:
 * Infineon SLB9635
 * Infineon SLB9645
In order to select the correct TPM implementation cleanly, CONFIG_TPM
is moved to src/Kconfig and does the correct choice.

Old-Change-Id: I2def0e0f86a869d6fcf56fc4ccab0bc935de2bf1
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/167543
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit b4049a0e96f6335a93877e1e884f9a440487c421)

i2c tpm: Remove mostly useless delay code/tables.

I assume from the code in the TPM driver that the TPM spec defines
different types of delays and timeouts which each have a particular
duration, and that the TPM can tell you how long each type is if you ask
it. There was a large table, some members of a data structure, and a
function or two which managed the timeouts and figured their value for
different operations.  The timeout values for the various "ordinals"
were never set in the vendor specific data structure, however, and
always defaulted to 2 minutes.  Similarly the timeouts a, b, c, and d
were never overridden from their defaults.  This change gets rid of all
the timeout management code and makes the "ordinal" timeout 2 minutes
and the a, b, c, and d timeouts 2 seconds, the larger of the two default
values.

This is a port from depthcharge to coreboot, original change:
https://chromium-review.googlesource.com/#/c/168363/

Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Stefan Reinauer <reinauer@google.com>

Old-Change-Id: I79696d6329184ca07f6a1be4f6ca85e1655a7aaf
Reviewed-on: https://chromium-review.googlesource.com/168583
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit b22395a73f361c38626911808332a3706b2334fe)

TPM: Stop requesting/releasing the TPM locality.

The locality is requested when the TPM is initialized and released when
it's cleaned up. There's no reason to set it to the same thing again and
restore it back to the same value before and after every transaction.

forward ported from https://chromium-review.googlesource.com/#/c/168400

Old-Change-Id: I291d1f86f220ef0eff6809c6cb00459bf95aa5e0
Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/168584
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit cc866c20c6f936f349d2f1773dd492dca9bbf0c1)

Squashed three commits for the i2c tpm driver.

Change-Id: Ie7a50c50fda8ee986c02de7fe27551666998229d
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6519
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-10 22:25:48 +02:00
Daniele Forsi 53847a211b src/.../Kconfig: various small fixes to texts
Fixed spelling and added empty lines to separate the help
from the text automatically added during make menuconfig.

Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6313
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-23 09:07:47 +02:00
Kyösti Mälkki b393fa09e5 AGESA S3: Fix ACPISCRATCH in CBMEM
After commit

  2ca2afe ACPI S3 support: Add acpi_s3_resume_allowed()

ACPISCRATCH region in CBMEM was no longer allocated, causing
AGESA platforms to fail S3 resume.

IS_ENABLED() did not evaluate true here with non-zero parameter.

Also avoid multiple defined defaults for HIGH_SCRATCH_MEMORY_SIZE.

Change-Id: Id99e4bee91581b8ac3d1ec44763b2d792b721832
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6093
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-06-25 06:23:07 +02:00
Paul Menzel 18600aa1ef payloads/external/SeaBIOS: Upgrade stable from 1.7.2.1 to 1.7.4
SeaBIOS 1.7.4 was released in December 2013 [1] and, besides other
things, supports writing debug messages to CBMEM console.

The new SeaBIOS Kconfig option `DEBUG_COREBOOT` has to be added to the
SeaBIOS configuration file `.config` as otherwise the SeaBIOS build
from within coreboot (`PAYLOAD_SEABIOS`) is interrupted as it is
detected as a new option.

This option was already added and enabled in commit 7c1a49bc [1]

	SeaBIOS: have coreboot pass the choice to run optionroms in parallel

so SeaBIOS messages are now written to the CBMEM console.

Successfully tested on the Asus M2V-MX SE.

[1] http://seabios.org/Releases
[2] http://review.coreboot.org/5443

Change-Id: I675a50532735b4921a664e4b24d98be17b9a1002
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5093
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-28 22:41:59 +02:00
Patrick Georgi fadbe5f657 build: make scan-build work again
This drops the scan-build related Kconfig options
since it's now possible to simply run

    scan-build [-o outdir] make

and get coreboot built with its report.

There's also no inner make process anymore, and the way
things work should be clearer now.

Also adapt abuild to this new reality.

Change-Id: I03e03334761ec83f718b3235ebf811834cd2e3e3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5774
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-17 21:15:14 +02:00
Furquan Shaikh a3b06c99d0 Arch-level Kconfig menu cleanup
Remove arch-level Kconfig menu option as it shows all available architectures in
make menuconfig. Instead pull the bootblock options for choice and update image
to top-level Kconfig since it is already present for both x86 and arm.

Change-Id: Iab9c4539f05cd54a7f751565fefcaf7b6f0edc86
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5673
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-10 14:32:26 +02:00
Martin Roth a6427161c2 Intel FSP: add a shared set of functions for the FSP
- Move the non chipset-specific fsp pieces out of the chipset into a
shared area.  This is used by northbridge / southbrige / SOC code.  It
pulls in pieces from Kconfig, Makefile and FSP specific code.
- Enabled in the CPU code with a Kconfig "select PLATFORM_USES_FSP"

Change-Id: I7ffa934c1df09b71d48a876a56e3b888685870b8
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5635
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-09 21:35:56 +02:00
Furquan Shaikh 99ac98f7e1 Introduce stage-specific architecture for coreboot
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the
architecture specific to that stage i.e. we will have CONFIG_ARCH variables for
each of the three stages. This allows us to have an SOC with any combination of
architectures and thus every stage can be made to run on a completely different
architecture independent of others. Thus, bootblock can have an x86 arch whereas
romstage and ramstage can have arm32 and arm64 arch respectively. These stage
specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain
and compiler flags for every stage.

These options can be considered as either arch or modes eg: x86 running in
different modes or ARM having different arch types (v4, v7, v8). We have got rid
of the original CONFIG_ARCH option completely as every stage can have any
architecture of its own. Thus, almost all the components of coreboot are
identified as being part of one of the three stages (bootblock, romstage or
ramstage). The components which cannot be classified as such e.g. smm, rmodules
can have their own compiler toolset which is for now set to *_i386. Hence, all
special classes are treated in a similar way and the compiler toolset is defined
using create_class_compiler defined in Makefile.

In order to meet these requirements, changes have been made to CC, LD, OBJCOPY
and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others.
Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the
toolsets are defined using create_class_compiler.

Few additional macros have been introduced to identify the class to be used at
various points, e.g.: CC_$(class) derives the $(class) part from the name of
the stage being compiled.

We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER
as they do not make any sense for coreboot as a whole. All these attributes are
associated with each of the stages.

Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5577
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-05-06 20:23:31 +02:00
Kyösti Mälkki 5687fc9d21 Declare recovery and developer modes outside ChromeOS
Move the implementation for recovery and developer modes from
vendorcode/google/chromes to lib/.

Change-Id: I33335fb282de2c7bc613dc58d6912c47f3b5c06c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4308
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-01 15:38:41 +02:00
Furquan Shaikh 20f25dd5c8 Rename coreboot_ram stage to ramstage
Rename coreboot_ram stage to ramstage. This is done in order to provide
consistency with other stage names (bootblock, romstage) and to allow any
Makefile rule generalization, required for patches to be submitted later.

Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26 13:27:09 +02:00
Furquan Shaikh 817149643c Get rid of HAVE_INIT_TIMER config option
There is redundancy in terms of use of init_timer. We have a Kconfig option to
decide whether a board has init_timer as well as we use a stub for init_timer in
places where we do not have any init_timer defined. Thus, remove the Kconfig
option. Henceforth, all boards that do not have init_timer functionality can
include a stub_timer if required.

Change-Id: I35d38ec686f4dc92861cf9248f9b540323cd98ae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5569
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-26 13:25:28 +02:00
Patrick Georgi 9b0de71459 buildsystem: check for coreboot toolchain by default
Other toolchains just don't cut it.

Change-Id: I7a0bdf60d89b5166c9a22c9e9f3f326b28f777b8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4584
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-04-16 08:20:06 +02:00
Idwer Vollering 7c1a49bcc0 SeaBIOS: have coreboot pass the choice to run optionroms in parallel
Introduce the tunable CONFIG_SEABIOS_THREAD_OPTIONROMS.

Change-Id: Ifd4d9fca7316eb739ff184e54bdc1cdb0262f0c6
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/5443
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-07 11:54:26 +02:00
Kyösti Mälkki deb2cb27e9 Static CBMEM / CAR: Flag boards with BROKEN_CAR_MIGRATE
Use of CAR_GLOBAL is not safe after CAR is torn down, unless the
board properly implements EARLY_CBMEM_INIT.

Flag vulnerable boards that only do cbmem_recovery() in romstage on S3
resume and implementation with Intel FSP that invalidates cache before
we have a chance to copy the contents.

Change-Id: Iecd10dee9b73ab3f1f66826950fa0945675ff39f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5419
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-04-01 11:36:00 +02:00
Duncan Laurie 7274800ea3 Add a generic register script handler
This is based on the RCBA configuration setup from haswell.
It handles PCI, BARs, IO, MMIO, and baytrail-specific IOSF.
I did not extend it to handle MSR yet but that would be another
potential register type.

There are a number of approaches to this kind of thing, but in the
end they have a lot of switch statements and a mass of #defines.
I'm not particularly set on any of the details so comments welcome.

BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=emerge-rambi chromeos-coreboot-rambi

Change-Id: Ib873936ecf20fc996a8feeb72b9d04ddb523211f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175206
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4923
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-04 16:31:14 +01:00