The current "normal" EPB (six) setting resulted in the desired out of
box power and performance for several CPU generations.
However, a power and performance analysis on Alder Lake and Raptor
Lake CPUs demonstrates that this value results in undesirable higher
uncore power and that seven is a more appropriate value.
Note: the Linux kernel "4ecc933b x86: intel_epb: Allow model specific
normal EPB value" patch sets the EPB to 7 for Alder Lake.
BRANCH=firmware-brya-14505.B
BUG=b:239853069
TEST=verify that EPB is set by coreboot
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I5784656903d4c58bedc5063ee3ef310a99711050
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66059
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to document 619503 ADL EDS Vol2, bit 18 of MSR_POWER_CTL
must be set to be able to set the Energy/Performance Bias using MSR
IA32_ENERGY_PERF_BIAS.
Note that since this bit was not set until this patch, the
`set_energy_perf_bias(ENERGY_POLICY_NORMAL);' call in
`soc_core_init()` was systematically failing.
BRANCH=firmware-brya-14505.B
BUG=b:239853069
TEST=verify that EPB is set by coreboot
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Ic24abdd7f63f4707b8996da4755a26be148efe4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds a new variant called Pazquel360 \
that is identical to Pazquel for now.
BUG=b:239987191
TEST=make
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I0a9ca4a59fb44256d0d8fcdbdf2a7db533c84412
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Bob Moragues <moragues@google.com>
The concise multi-line comment style is for inside function bodies to
save space. Outside of it, use non-concise style.
Change-Id: I34d9ec6984b598a37c438fa3c395b5478207e31d
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This adds the initial gpio configuration for the rex initial variant.
BUG=b:238165977
TEST=Boots and no errors on simics
Change-Id: I55ab31c7943e22df9cec8db4a9f0c3ab6f065ae1
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65952
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch fixes the documentation discrepancy of GPIO reset type
between PCH EDS and GPIO BWG.
As per GPIO BWG, there are four GPIO reset types in Meteor Lake as
below:
- Power Good - (Value 00)
- Deep - (Value 01)
- Host Reset/PLTRST - (Value 10)
- Global Reset for GPP - (Value 11)
Also, dropped the need for having dedicated reset type for GPIO
community 3. As per the MTL EDS, all GPIO communities have the same
reset type.
BUG=b:213293047
TEST=Able to build and boot Google/Rex without below error msg.
[ERROR] gpio_pad_reset_config_override: Logical to Chipset mapping
not found
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id7ea16d89b6f01b00a7b7c52945f6e01e8db6cbd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Will Kim <norwayforest92@gmail.com>
This patch introduces a new macro for GPP PAD reset type as
`Global Reset` as documented in Alder Lake EDS doc 630603.
BUG=b:213293047
TEST=Able to build Google/Kano with this change.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I39428911babc393dd10750801522a00d0b26d3e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Bind the PCDs that allow edk2 to use the whole display to a
Kconfig option called TIANOCORE_FULL_SCREEN_SETUP.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic977a199f3b308c566391e37f126c4fe518b2eb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The `call int-multiply` couldn't handle the Kconfig option being a
string so do the calculation in bash.
Tested on:
* Qemu
* StarLite Mk III
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1879d7efd504e2c42dadb12d2d8add4f69ca7b9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66161
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This caused edk2 serial output to be disabled 100% of the time.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If272369b405e7745fe82f49026cbed0abc50f355
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66160
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
converting the SVG logo to BMP at compile time using 'convert'
introduces terrible aliasing artifacts, so use a properly converted
BMP file as the default instead.
Test: boot qemu w/Tianocore, observe lack of aliasing in coreboot logo
Change-Id: I62d643c24abca57fa35b79732d8cedc83b94815f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Using 'convert' to convert the SVG logo to BMP for Tianocore
introduces terrible aliasing, so add a logo in BMP format
(converted using GIMP).
The default logo file used by Tianocore will be changed in a
subsequent commit.
Change-Id: I2490707a330713709dd4ba8ae99b22b123ba64da
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Enabling them causes firmware keyblock/preamble and/or body verification
failure. Hence disabling them to use software based verification.
Re-enable them once the issue is root-caused.
BUG=b:217414563
TEST=Build and boot to OS in Skyrim with PSP and x86 verstage.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I7e259ae5d790977d08afcb0a77f8d4f38c85f39e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66134
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently only SHA_GENERIC is used and does not need to be passed.
BUG=b:217414563
TEST=Build and boot to OS in Skyrim with PSP and x86 verstage.
Change-Id: Id705b1361fffaf940c51515e7f77d7fb0677fc4a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
ChromeOS connection manager (shill) already
has support for dock MAC address passthrough, therefore remove the
code to pass a dock's MAC address in ACPI.
BUG=b:235045188
TEST=build coreboot
Signed-off-by: Franklin Lin <franklin_lin@wistron.corp-partner.google.com>
Change-Id: I78320a7c6b0fd5392e24b63bff234229a3f4b9bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66040
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
wifi
This reverts commit 5e6fd360de.
On nereid, the SSDT entry for the PCIe wifi device is missing, causing
wake-on-WLAN not to work since the _PRW is missing.
It seems like when commit 5e6fd360de changed the SSDT generation logic
for CNVi and PCIe wifi, it broke the PCIe case. `wifi_pcie_ops` are
never assigned to any device, so
`parent && parent->ops == &wifi_pcie_ops` always returns false, and the
`wifi_cnvi_ops` are used even for PCIe devices.
Undo the changes in that CL. This allows both the CNVi and PCIe cases to
work. That CL was meant to fix an issue with the CNVi _PRW containing
garbage, but I can't reproduce this when the change is undone.
It was also meant to fix the following error on CNVi devices, but I
don't see any errors with this change:
[ERROR] NONE missing set_resources
BUB=b:233325709
TEST=On both nivviks (CNVi) and nereid (PCIe), check that the SSDT
contains the correct wifi device entries (below), including a _PRW
containing the correct GPE, and check that wake-on-WLAN works.
nivviks:
```
Scope (\_SB.PCI0.CNVW)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x6D,
0x03
})
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
<snip>
}
}
```
nereid:
```
Device (\_SB.PCI0.RP01.WF00)
{
Name (_UID, 0x923ACF1C) // _UID: Unique ID
Name (_DDN, "WIFI Device") // _DDN: DOS Device Name
Name (_ADR, 0x0000000000000000) // _ADR: Address
}
Scope (\_SB.PCI0.RP01.WF00)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x23,
0x03
})
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
<snip>
}
}
```
Fixes: 5e6fd360de ("drivers/wifi/generic: Fix properties in generic-under-PCI device case")
Change-Id: I100c5ee3842997c50444e5ce68d583834ed3a8ad
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66063
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add critical, passive policy, and pl values from thermal team.
BUG=b:239495499
TEST=Build and test on MB, system can boot to OS.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I8beb3b57ff56c6fe413bb0e3dd43d693aee08e36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66125
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
commit 108e537928
("payloads/tianocore: Add a proper target for the Boot Splash")
introduced 2 bugs in bootsplash handling:
- the "logo" make target added a spurious "/edk2" to the project dir
- the "logo" make target failed to account for the case where no user-
defined logo file is used (the upstream Tianocore one will be used
in this case)
Fix both these issues.
Test: build/boot qemu w/Tianocore w/o user-defined bootsplash file.
Change-Id: Ieebc547670213459823f58956ae87c6bf94b74ef
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Pujjo support WLAN device, enable PCIe port 4 for WLAN device
BUG=b:239899932
TEST=Build and boot on pujjo
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Ic8b7240941cf87a4f27963d50fffe28875114a81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66073
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Implement mainboard_needs_pcie_init() for cherry as a callback for
mt8195 SoC to determine whether to initialize PCIe. When the SKU id is
unknown or unprovisioned (for example at the beginning of the factory
flow), we should still initialize PCIe. Otherwise the devices with NVMe
will fail to boot.
BUG=b:238850212
TEST=emerge-cherry coreboot
BRANCH=cherry
Change-Id: I2ed0ceeb37d2924ca16485fb2d130959a7eff102
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
On SoCs which use A/B recovery layout, PSP verstage and signing keys are
expected to be present only in PSP L2 directory. Update amdfwtool to
include the PSP verstage and signing key only in PSP L2 directory.
BUG=b:239519603, b:238938623
TEST=Build and boot to OS in Skyrim with PSP verstage.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ieeb415be800b7ccf10d6983eb0b567e0a5eaa955
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Joxer will have both eMMC and UFS SKUs, which require different
settings in the descriptor. So update the descriptor at run-time based
on fw_config.
By default, the descriptor is configured for UFS. This configuration
still boots fine on eMMC SKUs, it just might cause problems with S0ix.
This is a temporary workaround. It will be removed once we've
implemented a proper solution for configuring the descriptor differently
for different SKUs.
BUG=b:238234376
TEST=Make an identical change for nivviks. On both nivviks (eMMC) and
nirwen (UFS), check that it boots and that the logs show the descriptor
being configured as expected.
Change-Id: I14232eb773936f2ecd183687208d332136935601
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
SSPM is "Secure System Power Manager" that provides power control in
secure domain. The initialization flow is to load SSPM firmware to
its SRAM space and then enable.
It takes 21 ms to load sspm.bin.
coreboot logs:
CBFS: Found 'sspm.bin' @0x21680 size 0xa815 in mcache @0xffffeac4
mtk_init_mcu: Loaded (and reset) sspm.bin in 21 msecs (137348 bytes)
TEST=we can see the sspm logs.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ib6443b64734048c1d71eeac650f36d7c4ac709cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Load MCUPM firmware and boot up MCUPM in ramstage.
It takes 41 ms to load mcupm.bin.
coreboot logs:
CBFS: Found 'mcupm.bin' @0x12580 size 0xf0c6 in mcache @0xffffead0
mtk_init_mcu: Loaded (and reset) mcupm.bin in 41 msecs (122184 bytes)
TEST=we can see the mcupm logs after reset releases.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Id1e62d9d6ede1c453e03eeda0d9b16fafa9e2372
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
edk2's default is to show a Boot Splash with their own logo which
looks like it's from the 1960's. Therefore, we replace this image
with coreboot's logo, taken from https://coreboot.org unless a
custom one is specified.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1b133e2a2cfd45a6650e4523b267f7508974137b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Set GPE route as
GPE0_DW0 -> GPP_A
GPE0_DW1 -> GPP_E
GPE0_DW2 -> GPP_F
BUG=b:224325352
TEST=Verified in emulator that there is no regression
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5e3e09cfc06d2556ea32cca23b3dae114a510498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This reverts commit b57d172fbb.
Reason for revert: Results into hard hang with serial debug msg as
below:
`[EMERG] Unable to unhide the P2SB device!`
Intel team is working towards to fix this issue.
BUG=b:239806774
TEST=Able to boot the Intel/MTLRVP with this revert.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic6be37c000afdf4f0c6c22497c233aa0bbc49d48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65500
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch overrides `Lp5CccConfig` UPD as per the CCC mapping data
captured from the Rex schematics dated 07/16.
BUG=b:224325352
TEST=Able to build Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia1d9e3665cff74a803e730c76f62773996efb3dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66049
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set the SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR config on Meteor Lake
to instruct Pad Configuration Lock.
BUG=b:211573253, b:211950520, b:213596994
TEST=Able to perform GPIO lock programming without error on MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icd123adb02716149fa51c9e4c987c281f9de2f43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Add the required files to support VBOOT for when it is enabled.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I083107b21c23f42193fc88aa174ec22850f45bc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65705
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
The X2APIC_LATE_WORKAROUND kconfig allows bringing APs in XAPIC mode initially hence, it won't work if LAPIC ID is > 0xff.
This patch ensures the MAX_CPUS logic is appropriate while selecting X2APIC_LATE_WORKAROUND kconfig from SoC.
BUG=b:219061518, b:219053812
TEST=Able to build Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I466e6cc568024a9dea80af21e0ebf3572e74a1f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add pujjo new supported memory parts in mem_parts_used.txt.
Generate SPD id for this part.
Micron MT62F1G32D4DR-031 WT:B
BUG=b:239776504
TEST=Use part_id_gen to generate related settings
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I95eb194ecbd5d39f66eb566132e75af056899325
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66039
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This patch updates the GPIO lock configuration recommendation
kconfig string to ensure the SoC user can select the correct
config as applicable for the SoC.
Note: From MTL onwards GPIO lock config can be performed using
PCR write (MMIO write) and the GPIO team has confirmed this.
BUG=b:213596994
TEST=Able to fix below GPIO lock config error msg on MTL with
`SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR` kconfig enabled.
[INFO ] Locking pad configuration using SBI
[INFO ] gpio_pad_config_lock_using_sbi: Locking pad 73
configuration
[ERROR] SBI Failure: Transaction Status = 1
[ERROR] Failed to lock GPIO PAD, response = 1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icab1e4849b8e08ee1c695c924599f1513774178f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch ensures the debug consent value is matching with the
inline comment.
TEST=Able to build the Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icf72eb2aa4064fd78f4f99570a4cf44e41932ec3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66008
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Lots of code from lenovo/haswell can be reused for lenovo/w541. Thus,
integrate it into lenovo/haswell and make it a variant.
Change-Id: If99d842cff777fe27ff63baabc447e69b9d0333c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
In preparation to CB:63514, make the INT15 support specific for the
T440p variant since the W541 doesn't support it currently.
Change-Id: I8dfcc061e1b8a831f75bf9a8035770cb678a85d4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66106
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds more GBB related configs. Select
`HAS_RECOVERY_MRC_CACHE` config.
Additionally, move VBOOT_LID_SWITCH config under VBOOT config.
TEST=Able to build the Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I28976200cbd70dc23f58868ee89c0ac700793be9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66007
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Hide these ACPI device so Windows does not warn about missing device
drivers.
Change-Id: Iba6cf7a17eefc9f4f247621f6625151f2fd5f3a7
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Jeremy Compostella