Starting with RK3399, PMUGPIO pull registers use the same write mask
format as normal GRF registers, so they need to use RK_CLRSETBITS()
rather than clrsetbits_le32().
BRANCH=None
BUG=None
TEST=boot from scarlet
Change-Id: Ibe391273d58ab35df993e149187d67497fcf2acc
Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: https://review.coreboot.org/20871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
some gpio irq need to set input pull initialization status
to guarantee to get the right irq trigger. let's add this argument
in gpio_input_irq() function
BRANCH=None
BUG=None
TEST=boot from bob
Change-Id: I9b8e6497f07146dafdb447a6ea10d039a2a2fa33
Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: https://review.coreboot.org/20866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
If TTYS0_BAUD is not configured, then by default use baudrate of 115200.
BUG=b:64030366
Change-Id: Ida4c7ae77aba5dfd4ec331e22a54ce43a91bde00
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/20834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Make DMI data calculation fail-safe to incorrect SPD data.
Change-Id: Ica92850cc77e1f7cbf3e7e44717de42a03b93bbe
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-on: https://review.coreboot.org/20839
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Decrease the link-frequencies as recommended by Omnivision for OV13858
and OV5670 camera sensors.
BUG=b:38326541
BRANCH=none
TEST=Build and boot soraka. Dump and verify that the generated DSDT table
has the required entries. Verified that sensor probe is successful.
Change-Id: I78fb2d3527f66b5147123a9c8fc4cb95650f86b6
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/20787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
GPP_B8 acts as input to the inverter whose output controls PERST#
signal to wifi module. Out of reset, GPP_B8 is configured as
input by default. Since there is no external pull-down on it, this
line is floating and results in PERST# being asserted until ramstage
where the GPIO was originally configured. Because of this the wifi
chip is not ready during the PCIe initialization step. Move the
configuration of GPP_B8 to bootblock so that wifi device is taken out
of reset as early as possible.
BUG=b:64181150,b:62726961
TEST=Verified with warm reboot and suspend-resume stress test that
wifi is still functional.
Change-Id: I68e1bd67499262a17daade72e9a9fd32934a184d
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/20869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add gpio.c to bootblock so that the variant early_gpio_table can be
used for configuration in bootblock.
BUG=b:64181150,b:62726961
Change-Id: I77181334257f2fd19982ecafc1f58afe912f4280
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/20878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add Cannonlake pci device ids for all the merged intel common code. As
of now only have CNL-U and CNL-Y pci ids.
Change-Id: Iee5087cdeba53919d83ff665d0c417075279294c
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/20823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Use the genric GPIO library. Add the required functions.
Also, update the Kahlee mainboard dependency to match.
Change-Id: I2ea562b052401efff3101f736788ca77d21e6de6
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/20543
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Provide a hook to allow an optional one-time cbmem_top() initialization.
The new function, cbmem_top_init(), is called on the first expected
initialization of cbmem based on the Kconfig options LATE_CBMEM_INIT
and EARLY_CBMEM_INIT.
Change-Id: I89edd2d11f226217c8e2aaca829b4f375a2cff28
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/20847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
For CAR platforms which don't migrate globals real globals can
be directly used. This alleviates the need to peform partial
recovery on every cbmem access which in turn acts like all non-CAR
platforms or any stages which execute entirely out of RAM.
Change-Id: I31c08dd6473324424d5d42fe6b56d42fe635929e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This introduces support for font scaling with a factor provided via
Kconfig. In practice, the font itself is not scaled at any point in
memory and only the logic to determine whether a pixel should be filled
or not is changed.
Thus, it should not significantly impact either the access time or
memory use.
Change-Id: Idff210617c9ec08c6034aef107cfdb34c7cdf029
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/20709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This introduces helpers for accessing the included font, instead of
using hardcoded values provided by the font's header itself.
It will allow painlessly adding support for font scaling in a subsequent
change. It should not introduce any functionality change.
Change-Id: I0277984ec01f49dc51bfc8237ef806f13e3547e2
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/20708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
If IGD PCI device is disabled:
1. BAR for the device will be 0.
2. There is no need to allocate framebuffer for this device.
Some early SOCs don't have GFX model fuse by default hence
we need to add a check to ensure PCI device is enable. This
code to avoid die inside coreboot for missing resources.
Change-Id: Ied677e8c77fa7b166b016da458caad0e4702b5d8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If IGD PCI device is disabled:
1. BAR for the device will be 0.
2. There is no need to allocate framebuffer for this device.
Some early SOCs don't have GFX model fuse by default hence
we need to add a check to ensure PCI device is enable. This
code to avoid die inside coreboot for missing resources.
Change-Id: Ic31d3e57ba730f6b569bf2cc3bdc54cb369b8caf
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add support for setting addresses of blobs only, and using address in
memory when ROM is mapped
Change-Id: I053c55253eee00558071d15923e3eb17b1e8410c
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/20474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Without RELOCATABLE_RAMSTAGE selected, S3 resume will hang under
Linux and Windows. All other Intel SoCs have this selected by
default, so this change simply corrects an omission on Braswell.
TEST: boot Linux on google/cyan with and without RELOCATABLE_RAMSTAGE
selected; observe that S3 resume fails without and succeeds with.
Change-Id: I9071d9b4e3e3a156281d95fae059947c4c26f744
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20819
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
IOBP (I/O Buffer Programming) is an interface (indirect addresses space)
in the RCBA that is used to configure the high speed serial lanes on the
PCH, that are used for PCIe, USB3 and SATA.
This patch replaces the offsets in RCBA with the defines from pch.h, gives
the access functions and their parameters useful names and replaces two
magic addresses in IOBP space with their defines.
Change-Id: I91a828ed076ca10733b47db876fabf5adaa63638
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/16214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The cbmem_fail_recovery() function was no longer used. I'm not sure
why the compiler never complained. Regardless, delete it.
Change-Id: I7d94118068064c61252d1b5ca9d8e92658a699e0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The code doesn't include much, but when compiled outside the coreboot
build (what the shipped Makefile is made for), we want to make sure that
the few files it includes are controlled by us.
TEST=`cd src/soc/nvidia/tegra124/lp0; make CC=arm-eabi-gcc` works
Change-Id: Ic2f1e4aa4047617b048ef7ef98d71f9d540ccd74
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20860
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We recently changed all PACKED, __PACKED, __attribute__((packed)) ... to
__packed to gain some consistency. In cbfstool we use compiler.h to
provide that where necessary.
The cross compiler I use doesn't provide __packed by itself, but liblz4
doesn't compensate for that. Therefore include compiler.h, and to avoid
adding dependencies to non-liblz4 code, do so through the command line.
Change-Id: I581e45639ac3e103af7c16793e8effe2e632dec7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
PCI function number takes only 3 bits, therefore
correct bitmask for it is 0x7.
Change-Id: Id41700be0474eecc4d5b5173c4d5686c421735e3
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-on: https://review.coreboot.org/20837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add support of DMI tables for AMD Opteron 6300 Series Processors.
Correct value for CPU family is taken from SMBIOS reference
specification.
Change-Id: I8c5d487c0f45f61deb081be50c6701a42fbf9111
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-on: https://review.coreboot.org/20838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We define BINARYPI_LEGACY_WRAPPER a method of calling AGESA
via functions in agesawrapper.c file. The approach implemented
there makes it very inconvenient to do board-specific
customisation or present common platform-specific features.
Seems like it also causes assertion errors on AGESA side.
The flag is applied here to all boards and then individually
removed one at a time, as things get tested.
New method is not to call AGESA internal functions directly,
but via the dispatcher. AGESA call parameters are routed to
hooks in both platform and board -directories, to allow for
easy capture or modification as needed.
For each AGESA dispatcher call made, eventlog entries are
replayed to the console log. Also relocations of AGESA heap
that took place are recorded.
New method is expected to be compatible with binaryPI.
Change-Id: I2900249e60f21a13dc231f4a8a04835e090109d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This FCH_OEM_CALLOUT bypasses API and uses structures
that are private to AGESA. Attempt to clean it up by
first clarifying when it is used.
Change-Id: I63aa0f586f73e97d615b8596d73728edbaeb0a2d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Experiments on f14 f15tn and 16kb suggest that TSC
counter value shifts at end of raminit. To account
for this all previously stored values in timestamp
table are also divided by 4.
Change-Id: I47584997bf456e35cf0aeb97ef255748745c30ee
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Boards without AGESA_LEGACY_WRAPPER gain EARLY_CBMEM_INIT.
This does not apply to family12 and family14 just yet, as
they do invalidate without write-back on CAR teardown.
Change-Id: I008356efa2bc3df0ed1f0720e225ecc7e9995127
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In AGESA specification AmdInitEnv() is to be called once
host memory allocator has started. In coreboot context this
could mean either availability of CBMEM or malloc heap.
As for AmdS3LateRestore(), there is no requirement to have
it run as part of the romstage either.
Change-Id: Icc8d97b82df89e2480e601d5c2e094de0365b0a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We define AGESA_LEGACY_WRAPPER a method of calling AGESA
via functions in agesawrapper.c file. The approach implemented
there makes it very inconvenient to do board-specific
customisation or present common platform-specific features.
Seems like it also causes assertion errors on AGESA side.
The flag is applied here to all boards and then individually
removed one at a time, as things get tested.
New method is not to call AGESA internal functions directly,
but via the dispatcher. AGESA call parameters are routed to
hooks in both platform and board -directories, to allow for
easy capture or modification as needed.
For each AGESA dispatcher call made, eventlog entries are
replayed to the console log. Also relocations of AGESA heap
that took place are recorded.
New method is expected to be compatible with binaryPI.
Change-Id: Iac3d7f8b0354e9f02c2625576f36fe06b05eb4ce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Lin Huang