One could understand 'where' as bus, device, function
or register. Make it clear it is register.
Change-Id: I95d0330ba40510e48be70ca1d8f58aca66c8f695
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Some new feature added into FSP specification to perform dispatching
of external PPI service from boot firmware (coreboot) to FSP.
Change-Id: Iaf6b54ccd27e21860539bb2a9966054fdb027108
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31839
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds a generic provision into FSP2.0 driver to implement
dedicated PEIM to PEIM interface as per Intel FSP requirement.
Change-Id: I988d55890f8dd95ccf80c1f1ec2eba8196ddf9a7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Adding Hatch_whl as a variant of hatch. This is a snapshot of the WHL
version of hatch so that we can rebuild the bios images for Hatch with
WHL SoC.
BUG=b:127310803
BRANCH=NONE
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
make sure HATCH_WHL is built as well.
Change-Id: I24510fa226878582a61f1846f0b56a2c65204a92
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Following changes are done to enable audio support on hatch
1. Enable I2C4 device at 400Khz at 1.8V
2. Configure GPIO for HP INT and SPKR_PA_EN
3. Add ACPI entry for RT5682 and MAX98357A
4. Enable I2S0 and I2S1 lines
5. Enable generic max98357a driver in Kconfig
BUG=b:123738217
BRANCH=none
TEST=Check SSDT table for RT5682 & MAX98357a entry.
Verify audio using Sound Open firmware (SOF)
Change-Id: I93f3917c19cc3f0f8fd7b5e1b4d9b24a59f45f84
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The r8152 kernel driver is expecting the AMAC() method to return
a raw buffer, not a string. To fix this simply remove the
ToString() in the return statement that was converting the buffer
to a string.
BUG=b:123925776
Change-Id: I7cd4244a1ccc7397d5969b817a52ea48867b4d17
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31807
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It may be useful to have a common, easily available toolbench for
firmware analysis and Ghidra looks promising.
Change-Id: I56d0ff875bb939f6d31f088232f8a6fd168abbb6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31806
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some Apollo Lake mainboards use SeaBIOS as payload. SeaBIOS requires the
initialization of the programmable interrupt controller (PIC) for
faultless operation. The PIC mode is need for USB support (e.g.
keyboard, memory stick) and for some Option ROMs (e.g. PXE ROM).
Therefore add setup_lapic() to configure the APIC.
Change-Id: I00b339ce1850729023db74da7f8845927a95dcc6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31802
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
One-off packages do us little good, we need to be able to automate
building them.
Change-Id: Idd9b6b231435ea9d6e946c7ccaa71174b497742c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31804
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch updates the Kconfig linter to support the new CONFIG() macro
in the same manner that IS_ENABLED() was previously supported. It will
be flagged when it is used on non-bool Kconfigs or used with #ifdef, and
it is supported for checking used Kconfigs. Remaining uses of
IS_ENABLED() are flagged with a deprecation warning.
Change-Id: I171ea8bc8e2d22abab7fc4d87ff4cf8aad21084f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31776
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Update the document to match clang-format and checkpatch formally, and
provide a rationale.
Change-Id: I597a27d4e22d07e033b36f0dceb554ac1d8d5789
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
In preparation for the transition of hatch from WHL to CML, we are
creating a checkpoint called hatch_whl that we can use for creating
firmware compatible with the WHL hatch variant.
BUG=b:127310803
BRANCH=NONE
TEST=NONE
Change-Id: Iecae584ee6feefcf29955a4720e9c24bdc8abe6d
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch adds support for logging wake source information in gsmi
callbacks. With this change, all the elog logging infrastructure can
be used for S0ix as well as S3 on cannonlake.
BUG=b:124131938
BRANCH=none
TEST=Verified that the wake events are logged during the S0ix resume:
6 | 2019-03-04 17:03:13 | S0ix Enter
7 | 2019-03-04 17:03:17 | S0ix Exit
8 | 2019-03-04 17:03:17 | Wake Source | RTC Alarm | 0
9 | 2019-03-04 17:03:55 | S0ix Enter
10 | 2019-03-04 17:03:56 | S0ix Exit
11 | 2019-03-04 17:03:56 | Wake Source | GPE # | 21
12 | 2019-03-04 17:04:36 | S0ix Enter
13 | 2019-03-04 17:04:45 | S0ix Exit
14 | 2019-03-04 17:04:45 | Wake Source | GPE # | 112
15 | 2019-03-04 17:05:01 | S0ix Enter
16 | 2019-03-04 17:05:09 | S0ix Exit
17 | 2019-03-04 17:05:09 | Wake Source | Power Button | 0
Change-Id: Id627843e22c2524dfa94395b780cf2134f386137
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change moves soc_fill_power_state and soc_prev_sleep_state to
pmutil.c. It allows the functions to be used across romstage and smm.
BUG=b:124131938
BRANCH=none
TEST=none
Change-Id: If24c3feeb77f4fb692ef0bf38d537b2b54de3c36
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Create the way of adding the discrete VGA OpROM at config UI (alternative to
./cbfstool ./cb.rom add -f vgabios_dgpu.bin -n pci1002,6663.rom -t optionrom )
DGPU options are accessible only if CONFIG_VGA_BIOS is enabled.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I0a7bf0fe95c833cf3df0c7cb20fc27b6ab218c5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Some of the older chipsets that are known not to have ME at all
were removed for some reason, add them back in.
Also some newer chipsets/ME models were missing, add them in.
Change-Id: Iaed9a342e478a483113bf81d25042a6041fbc4ba
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This patch adds timestamp for "end of romstage" with postcar if platform
has selected postcar as dedicated stage.
If postcar stage doesn't exist then "end of romstage" timestamp will get
call while starting of ramstage as exist today.
TEST=It's been observed that "end of romstage" timestamp doesn't appear
in "cbmem -t" log when ramstage is not getting executed. As part of this fix
"end of romstage" timestamp is showing in "cbmem -t" log on Intel platform
where POSTCAR is a dedicated stage.
Change-Id: I17fd89296354b66a5538f85737c79145232593d3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch adds dedicated timestamp value for postcar stage.
TEST=Able to see "start of postcar" and "end of postcar" timestamp
while executing cbmem -t after booting to chrome console.
> cbmem -t
951:returning from FspMemoryInit 20,485,324 (20,103,067)
4:end of romstage 20,559,235 (73,910)
100:start of postcar 20,560,266 (1,031)
101:end of postcar 20,570,038 (9,772)
Change-Id: I084f66949667ad598f811d4233b4e639bc4c113e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
CPU PM TIMER EMULATION logic will help UEFI payload to execute rather
wait for time tick in absence of TCO and ACPI PM timer after FSP-S.
BUG=N/A
TEST=Able to build and boot with tianocore payload.
Change-Id: I7fd11e728b7a14f41f08bc39bcd92a42a8aa6cff
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Rename VB2_DISABLE_DEVELOPER_MODE to VB2_CONTEXT_DISABLE_DEVELOPER_MODE.
See CL in CQ-DEPEND for details.
BUG=b:124141368
TEST=Build locally
CQ-DEPEND=CL:1460645
BRANCH=none
Change-Id: Ib9754425dc2f346e8edac584c4d076d13ae31d2d
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Rename VB2_SD_DEV_MODE_ENABLED to VB2_SD_FLAG_DEV_MODE_ENABLED.
See CL in CQ-DEPEND for details.
BUG=b:124141368
TEST=Build locally
CQ-DEPEND=CL:1460644
BRANCH=none
Change-Id: I298cd3a5026055e439de1ce409e61f1feb24369b
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch is a raw application of
find payloads/ -type f | \
xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The IS_ENABLED() macro is pretty long and unwieldy for something so
widely used, and often forces line breaks just for checking two Kconfigs
in a row. Let's replace it with something that takes up less space to
make our code more readable. From now on,
if (IS_ENABLED(CONFIG_XXX))
#if IS_ENABLED(CONFIG_XXX)
shall become
if (CONFIG(XXX))
#if CONFIG(XXX)
Change-Id: I2468427b569b974303084574125a9e1d9f6db596
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Complete the removal of the fanless command line options. The only soc
using them has been converted to use the subprogram option instead.
TEST=Verify amdfw.rom is unchanged before and after the conversion
BUG=b:126691068
Change-Id: I187f17743cc98cc136b0df61caf8e95d17f98d51
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31737
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change the amdfwtool command line arguments to use the new --subprogram
option.
TEST=Verify amdfw.rom is unchanged before and after the conversion
BUG=b:126691068
Change-Id: Iaae4094251974b8dad48b8d2c37bb2e43a412237
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31736
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Separate the type field for the PSP directory table to better match the
AMD Platform Security Processor BIOS Architecture Guide (order #55758,
NDA only). Instead of a 32-bit type, change to an 8-bit value and an
8-bit subprogram field to allow for a more generic application across
family/model products.
This patch also eliminates the "fanless" types, previously added for
stoneyridge, and converts the --smufnfirmware and --smufnfirmware2
arguments to use a subprogram value of 1.
Subsequent patches will change the stoneyridge makefile to use the
new option, and eliminate the fanless arguments.
TEST=Boot google/grunt, confirm no difference in amdfw.rom file.
BUG=b:126691068
Change-Id: If8f33000c31cba21f286f54459de185c21e46268
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31735
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace variables and function arguments with a context that may be
maintained and passed. Add macros to clarify the pointer math. Add
functions to generate tables instead of relying on correct ordering
and math. Use defined sizes for tables instead of arbitrary additions
to an index.
TEST=Verify no difference in amdfw.rom for google/grunt before and
after, and verify a grunt build with PSP_COMBO=1 runs.
Change-Id: I7ad12fa5d615d1aa3648db40e3ea75f8cf2ed59a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Elyes HAOUAS