Implements fit_payload_arch for the arm (aarch32) architecture, so that
FIT images can be used. The implementation is very similar to the
existing implementations for arm64 and riscv, and has mostly been
lifted from these other ports.
TEST: Booted Beaglebone Black (in progress port, to be submitted soon!)
with a FIT image containing a 5.4 kernel, dtb and initramfs.
Change-Id: I6b50c6f06b83c00a5b3622b5bbafe67130b6d233
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Capture the GPIO subsystem wake state and add events to
the eventlog.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7f10bf4599ea7928cc87b6b10ac11a7c30e58406
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In order to log gpio events for wake purposes the state
of the gpio subsystem should be snapshotted. Add the ability
to capture state of gpio subystem as well as saving up to 16
gpios that indicate their wake status.
Likewise, provide the eventlog additions based on state.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I49fca56c87543aa8aad0eb7da5c5cb570c4349d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44534
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Switch from locating the AMD firmware in the RW_A &
RW_B regions with their hardcoded locations to using CBFS to find
them. They still need to be at the hardcoded locations so that we
can set the location inside the binary, but instead of just setting
the pointer directly to them, we now search for them with cbfs.
BUG=b:154441227
TEST=Boot & verify that binaries are located in both RW-A & RW-B
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I27b0593e0db7a9e6ba9b0633ac93b4d93954f002
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42831
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This #define wasn't removed when the tests were removed, so get rid
of it now.
BUG=None
TEST=Build
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ie0005b6ee97037bf3dfb80f0c2408d8bd9ee9633
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
There are only headers for the SoC's UART 0 and 1 on the board.
BUG=b:165020060
TEST=Linux only detects UART 0 and 1.
Change-Id: I45929f65a5f844ae5cef792b11176f487c80766f
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44530
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order for Linux to find and use the SoC's integrated UARTs, they need
to be exposed in ACPI.
BUG=b:165020060
TEST=Linux detects the SoC's integrated UARTs.
Change-Id: Iaa66657b88f62b2067c865c3e1945b7bdbf9be23
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Using the SOC's UART 0 as console requires moving a few resistors on the
Mandolin board.
BUG=b:165020060
TEST=coreboot console works on SoC UART 0 when AMD_LPC_DEBUG_CARD isn't
selected.
Change-Id: Idaf73ae84f54028da2182ce42035f9ecd63f4776
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
In CB:44488 the cbmem addition was re-filling the object
when it should be memcpy()ing from static object. Correct
that oversight. The side effect from the previous implementation
would be if FSP-M modified the GPE state.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I158a89ae28431896fa9b5789292000fcbf0b066d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44533
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function
(NF1) without internal pull-down which wrongly presents HPD interrupts.
DP_HPD had been removed for EVT design as those events are through eSPI.
This change configures GPP_A19 and GPP_A20 to be no connection and
disables DdiPort1Hpd and DdiPort2Hpd.
BUG=b:162566436
TEST=Booted to kernel and verified no kernel HPD pins assertion message
on Volteer EVT board.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ia3245741b776b75073d2b43d36c8ea40b476b3ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44501
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The wake source macro for GPE events was using 'GPIO'. However,
current usage is really all GPEs. Therefore, provide clarity
in the naming in order to allow for proper GPIO wake events
that are separate from the ACPI GPE block.
BUG=b:159947207
Change-Id: I27d0ab439c58b1658ed39158eddb1213c24d328f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Configure TRACKPAD_INT_ODL pad reset config to DEEP and
map PMC_GPE_DW to PMC_GPP values.
TEST=System should wake from S3 via trackpad
Change-Id: I58ce3720e0fdeefb2c9440bb3006897ef80211ea
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
PMC_GPE_DW mapping was not configured correctly and hence
coreboot skipped programming Tier 1 GPIOs resulting in failure of
S3 wake from Trackpad.
TEST=System should wake from S3 via trackpad
Change-Id: I59ce3720e0ffeefb2c9440bb300689def80211ea
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
After `make clean` a new build should not be based on stale artifacts.
Hence we have to remove them.
Change-Id: I540a83a6c87b843b1c4c9c55990bf3e91fe90d79
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
After `make clean` a new build should not be based on stale artifacts.
Hence we have to remove them.
Change-Id: I18292c674986078d991668124193b6aa31234d47
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Similar to commit b45ed65, the HOB structure is actually a 8 byte
address pointing to the HOB data.
Tested=Verified the values of the hob fields are the same printed by
soc_display_memmap_hob().
Change-Id: I348d3cd80a56e86d22f20fcadf0316b462b86829
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Enable long mode in SMM handler.
x86_32 isn't affected by this change.
* Enter long mode
* Add 64bit entry to GDT
* Use x86_64 SysV ABI calling conventions for C code entry
* Change smm_module_params' cpu to size_t as 'push' is native integer
* Drop to protected mode after c handler
NOTE: This commit does NOT introduce a new security model. It uses the
same page tables as the remaining firmware does.
This can be a security risk if someone is able to manipulate the
page tables stored in ROM at runtime. USE FOR TESTING ONLY!
Tested on Lenovo T410 with additional x86_64 patches.
Change-Id: I26300492e4be62ddd5d80525022c758a019d63a1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
Add support for Cannonlake-LP SoCs (Whiskeylake-U,
Coffeelake-U, Cometlake-U) as a separate parsing profile,
copying the existing 'Sunrise' profile and adjusting for differences
in reset mapping and GPIO macro generation
Test: convert inteltool GPIO log dump into coreboot macros for
an out-of-tree CML-U board.
Change-Id: I86296697ee892af7aa0818fb608b6d68fad2f307
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Add new librem_whl baseboard and Librem Mini variant.
Tested with SeaBIOS, Tianocore, and Heads payloads.
All functions working normally except SATA, which is limited
via a FSP UPD to 3Gbps until the correct HSIO PHY settings
can be determined.
https://puri.sm/products/librem-mini/
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: I36af42766f85eb17f86f6ec9b48b87125fb911e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
FSP enables IPU (Imaging Processing Unit) by default even if its
disabled in devicetree. We need to fill FSP upd based on the device
enablement in devicetree.
BUG=None
BRANCH=None
TEST=IPU is disabled and doesn't show in lspci.
Change-Id: I0f9a40e85427fd88bb12a40770ecf7b939b1d8cd
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Enable the introduced LPSS ACPI uart driver.
Tested on Hermes using Linux 5.6:
The UART2 appears as /dev/ttyS2.
Change-Id: Ic15be4a807012216e52c848120de7e39522f57b7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Emit ACPI code for LPSS UARTs operating in ACPI mode. In this mode the
device vendor ID reads as 0xffff, the PCI devices is still operate.
Add ACPI device IDs for APL, GLK, SPT, SPT_H and CNP_H.
The mainboard's devicetree needs to be adapted to include the chip
driver and the PCI ID when it wouldn't have been hidden.
Example:
chip soc/intel/common/block/uart
device pci 19.2 hidden
register "devid" = "PCI_DEVICE_ID_INTEL_CNP_H_UART2"
end # UART #2
end
Tested on Linux 5.6 with Sunrise Point ACPI ID for UART2.
Tested on Windows for all other UARTs.
Change-Id: I838d16322be38f5421c1f63b457a0af552e0ed96
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40405
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPE events were not be recorded in the eventlog. Add those
to the eventlog when the status register indicates those events.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ifb3167fd24f2171b2baf1a65eb81a318eb3e7a86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Previously the chipset state was snapshotted very late in the boot
(ramstage). Instead start gathering the state early in romstage
prior to calling any FSP routines so there's a clean snapshot.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Id41686e6cdf5bebc9633b514b4121b0447f9be2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Now that no one is consuming this object, remove its definition.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ib5aeec1733b6c9fa49569e30c4c369f70af0939c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Sam Lewis