Commit graph

38 commits

Author SHA1 Message Date
- supermicro/x6dhe_g/auto.c
d1327ce963 Major cleanups of the hard_reset() code and config in coreboot.
- Drop unused "#object reset.o" entries.

 - Use CONFIG_HAVE_HARD_RESET for all "object reset.o" entries.

 - Drop dead/commented code, i.e. useless hard_reset() from:
   - supermicro/x6dhe_g/auto.c
   - supermicro/x6dhe_g2/auto.c
   - supermicro/x6dhe_g2/auto.updated.c
   - supermicro/x6dhr_ig/auto.c
   - supermicro/x6dhr_ig2/auto.c
   - digitallogic/msm586seg/auto.c
   - dell/s1850/auto.c

 - Add "obj-$(CONFIG_HAVE_HARD_RESET) += reset.o" to kconfig files of boards
   that actually have a reset.c file.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4849 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-24 19:17:24 +00:00
Peter Stuge
d08be7eecd Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4803 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 15:01:00 +00:00
Peter Stuge
777e069c5a Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop"
abuild tested

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4791 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 17:43:46 +00:00
Uwe Hermann
d65509de14 Set default ROM sizes per-board to match the ROM chip that came
with the respective board.

Of course, the user can still override the size in menuconfig.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4790 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 17:37:20 +00:00
Myles Watson
b8e2027be8 Add CONFIG_GENERATE_* for tables so that the user can select which tables not
to build, but by default all the tables that are available are built.

Make PIRQ table build for qemu.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-15 13:35:47 +00:00
Uwe Hermann
95313d824d Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boards
and PIRQ tables were actually wrong, I cannot imagine they ever
worked properly.

 - Use CONFIG_IRQ_TABLE_COUNT in all irq_tables.c files instead of
   hard-coded numbers.

 - Make all CONFIG_IRQ_TABLE_COUNT values in irq_tables.c match Options.lb.

 - Make all CONFIG_IRQ_TABLE_COUNT values match the actual number of entries
   in the irq_tables.c file.

 - Set all CONFIG_IRQ_SLOT_COUNT values in src/.../Options.lb for those
   boards where they were set to 0 (in order to be overridden in
   the respective targets/.../Config.lb).

   This is mainly done to aid Patrick's scripts for kconfig conversion.

 - Fix a number of comments in irq_tables.c files.

 - Drop CONFIG_IRQ_SLOT_COUNT usage from boards that don't have irq_tables.c:
    - tyan/s1846
    - asus/a8v-e_se
    - asus/m2v-mx_se

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4739 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-07 21:51:33 +00:00
Uwe Hermann
b24e276503 PCI_ROM_RUN and CONSOLE_VGA are global options in Kconfig and
should not be set in per-mainboard Kconfigs.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4722 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-05 00:07:12 +00:00
Patrick Georgi
24796fd364 This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.
Both were only really used in pre-cbfs, as the payload's size isn't
relevant for the build process anymore.

Various calculations in {no,}failovercalculation.lb are adapted
accordingly.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-04 18:55:40 +00:00
Patrick Georgi
6768f39a4b Remove:
- CONFIG_CBFS
- anything that's conditional on CONFIG_CBFS == 0
- files that were only included for CONFIG_CBFS == 0
In particular:
- elfboot
- stream boot code
- mini-filo and filesystems (depends on stream boot code)

After this commit, there is no way to build an image that is not using
CBFS anymore.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4712 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-03 16:24:58 +00:00
Uwe Hermann
8f3ec7b1a3 Remove duplicate and not too useful Kconfig board comments as
per discussion on the mailing list.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4711 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-03 15:34:08 +00:00
Stefan Reinauer
c13093b148 simplify source tree hierarchy: move files from sdram/ and ram/ to lib/
It's only three files. Also fix up all the paths (Gotta love included C files)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4661 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-23 18:51:03 +00:00
Uwe Hermann
84a0f54b3b Add kconfig support for all Intel 82810 (i810) boards.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4613 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-28 16:38:42 +00:00
Uwe Hermann
bca3b92df2 Add kconfig support for all missing Intel 440BX based boards.
This includes:

soyo/sy-6ba-plus-iii
a-trend/atc-6240
a-trend/atc-6220
gigabyte/ga-6bxc
biostar/m6tba
azza/pt-6ibd
tyan/s1846
abit/be6-ii_v2_0
compaq/deskpro_en_sff_p600msi/ms6119
msi/ms6147
asus/p2b
asus/p2b-d
asus/p2b-ds
asus/p3b-f

The Makefile.inc for all of them are _exactly_ the same, so I made a common
src/mainboard/Makefile.romccboard.inc (maybe needs a nicer name). I also suspect
that many other romcc-based boards will be able to re-use this Makefile.inc.

Apart from the board name, most boards only differ in the Super I/O that's
being used and the IRQ_SLOT_COUNT value. The Tyan S1846 is a bit different
as it doesn't have an irq_tables.c.

I also dropped the broken MS-6178 kconfig stuff for now, I'll submit a
proper config in another patch.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4587 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-26 17:10:00 +00:00
Patrick Georgi
0588d19abe Kconfig!
Works on Kontron, qemu, and serengeti. 

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>

tested on abuild only. 

Acked-by: Ronald G. Minnich <rminnich@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12 15:00:51 +00:00
Uwe Hermann
fc6de69078 Fix MS-6178 boot by setting unused device (CIR) to 'off' (trivial).
Tested on hardware, works fine.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4423 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-11 22:00:37 +00:00
Uwe Hermann
328bccc610 Enable onboard VGA on the MS-6178 (i810 chipset) board (trivial).
Tested on hardware with the patch from r4398 and works fine as soon
as Linux boots (no VGA in FILO for some reason, will investigate).

In order to make the 'i810.vga' VGA blob from the vendor BIOS work
you have to make the check for PCI device ID mismatches non-fatal
(for now) in the src/devices/pci_rom.c file like this:

Index: src/devices/pci_rom.c
===================================================================
--- src/devices/pci_rom.c       (Revision 4393)
+++ src/devices/pci_rom.c       (Arbeitskopie)
@@ -87,7 +87,7 @@
        if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) {
                printk_err("Device or Vendor ID mismatch Vendor %04x, Device %04x\n",
                           rom_data->vendor, rom_data->device);
-               return NULL;
+               // return NULL;
        }

        printk_spew("PCI ROM Image,  Class Code %04x%02x, Code Type %02x\n",

The reason is that the VGA blob thinks the proper VGA device ID is 0x7123
whereas it really is 0x7121 on hardware. There are multiple ways to work
around this (there have been many discussions in the past), we'll see which
method will be used in future...

Note: This has been tested against r4393 only for now to make sure there
are no problems because of the recent resource allocator changes, see
http://www.coreboot.org/pipermail/coreboot/2009-July/050486.html.
Tests with trunk will follow.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-05 16:01:57 +00:00
Stefan Reinauer
9dd27bc03a the tool chain settings should not be in renamed (as they will never live in
Kconfig)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30 17:13:58 +00:00
Stefan Reinauer
0867062412 This patch unifies the use of config options in v2 to all start with CONFIG_
It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30 15:17:49 +00:00
Myles Watson
f17f647a62 Undo my ugly commit that added uses clauses in lots of places instead of one.
Fix configuration of all boards. (Abuild tested)
Hopefully fix compilation of PPC boards (they've never compiled for me.)

Apologize profusely.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4367 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-19 21:18:14 +00:00
Uwe Hermann
6114311c8e Convert the MSI MS-6178 board to CBFS.
Also, enable HIGH_TABLES support for this board.

The HIGH_TABLES failed with:

  No matching ram area found for range:
    [0x00000000000f0000, 0x0000000000100000)
  Ram areas
    [0x0000000000000000, 0x0000000000001000) Reserved
    [0x0000000000001000, 0x00000000000a0000) RAM
    [0x0000000000100000, 0x000000000fff0000) RAM
    [0x000000000fff0000, 0x0000000010000000) Reserved
  SELFBOOT RETURNED!
  Boot failed.

The fix was to change northbridge.c as follows:

  - ram_resource(dev, idx++, 1024, tolmk - 1024);
  + ram_resource(dev, idx++, 768, tolmk - 768);

This is build-tested and tested on hardware by me. It boots fine,
for instace with SeaBIOS and the standard GRUB1 from my disk.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-19 15:41:49 +00:00
Myles Watson
82bc9bc31e Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial.
Abuild tested with -C.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4360 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-17 16:38:43 +00:00
Carl-Daniel Hailfinger
cff071ab0e When I started refactoring mainboard Config.lb, I added two different
files for targets without failover:
src/config/nofailovercalculation.lb (64 kB XIP)
src/config/nofailovercalculation128.lb (128 kB XIP)
Targets with other XIP sizes were ignored.

This patch moves XIP size back into mainboard code.

Benefits from this patch:
- src/config/nofailovercalculation128.lb is no longer needed
- Targets with XIP sizes besides 64k and 128k benefit from refactoring
- Conceptually, this makes the include files pure calculation files
without settings.

Abuild tested.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-06 16:50:38 +00:00
Joseph Smith
60f0f1b18f enable/disable IDE 0/1 (Primary/Secondary) interfaces on the i82801xx southbridge.
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4324 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-29 13:45:22 +00:00
Carl-Daniel Hailfinger
b5e10bcf1f Thanks to Myles' patch adding support for include statements,
refactoring Config.lb became possible.

Factor out ROM size calculation from Config.lb.
  
This patch converts 87 boards (with and without USE_FAILOVER_IMAGE),
but it has to work around a parser bug. 

89 files changed, 209 insertions(+), 2415 deletions(-)
A total of 2206 removed lines.
  
Abuild works for all changed boards on khepri.

Myles writes:
I've tested serengeti for the failover portion and s2892 for the
nofailover portion.  ldoptions are exactly the same and they both boot
the same.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-21 00:16:06 +00:00
Peter Stuge
483b7bbd77 v2/src romfs->cbfs rename
This also has the config tool changes in v2/util.

Rename romfs.[ch]->cbfs.[ch] and sed romfs->cbfs romtool->cbfstool ROMFS->CBFS

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4113 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-14 07:40:01 +00:00
Ronald G. Minnich
d469cdab93 Add the CONFIG_ROMS config variable.
Tested under abuild, causes no trouble. 

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>

Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4035 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-31 16:32:01 +00:00
Carl-Daniel Hailfinger
7ad11e8d33 Carl-Daniel's part:
This patch converts mainboard_$VENDOR_$BOARD_ops to mainboard_ops and 
mainboard_$VENDOR_$BOARD_config to mainboard_config.

Ron's part:
The config change that makes the naming change not break every build.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-02-18 20:41:57 +00:00
Uwe Hermann
4cf5ecf39d Get rid of the unnecessary indirection by 'struct mem_controller' for the
Intel 810 chipset (and all boards using it). This isn't required for this
chipset as there's only one memory controller.

This also helps a lot with romcc register usage, you should see the dreaded
"too few registers" less often.

Build-tested with all three boards using the Intel 810 chipset.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Corey Osgood <corey.osgood@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3764 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-11-20 23:18:10 +00:00
Uwe Hermann
3b6c527322 Always enable serial before SMBus (or as early as possible), as the SMBus
enable may do printk()s which result in a 2 minute delay on some boards.

Fix this on all boards which currently do smbus_enable() before enabling
the serial console.

Thanks to Elia Yehuda <z4ziggy@gmail.com> for tracking this bug down.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3742 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-11-11 14:26:03 +00:00
Carl-Daniel Hailfinger
2ee6779a64 The ARRAY_SIZE macro is convenient, yet mostly unused. Switch lots of
code to use it. That makes the code more readable and also less
error-prone.

Abuild tested.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3624 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-01 12:52:52 +00:00
Carl-Daniel Hailfinger
00809ebf02 This changes the python generated makefiles
targets/*/*/Makefile
        targets/*/*/normal/Makefile
        targets/*/*/fallback/Makefile

to use a common copy of romcc, and to leave this compiler untouched by
'make clean' in targets/*/*/fallback/ and targets/*/*/normal/ .
'make clean' in targets/*/*/ will clean romcc.

Thanks to Mats for the initial idea and implementation of a tool to do
this. This patch has almost the same behaviour as the original tool
without having to run the tool each time.
Tested for abuild-friendliness.

The patch saves ~10-12 seconds for every target using romcc. For a full
abuild run, this is ~20% time saved.
For the first 38 abuild targets, total build time is down to 13m24s
instead of 16m22s on my machine.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Mats Erik Andersson <mats.andersson@gisladisker.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3564 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-04 13:44:00 +00:00
Stefan Reinauer
f8ee1806ac Rename almost all occurences of LinuxBIOS to coreboot.
Due to the automatic nature of this update, I am self-acking. It worked in
abuild.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18 15:08:58 +00:00
Stefan Reinauer
7e61e45402 Please bear with me - another rename checkin. This qualifies as trivial, no
code is changed.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3052 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18 10:35:56 +00:00
Myles Watson
15674b78be This adds the same line (uses CONFIG_PRECOMPRESSED_PAYLOAD) to every
Options.lb file that already had a "uses CONFIG_COMPRESSED_PAYLOAD_LZMA"
line in it.

I figure that only adding it to the files that already have support
for LZMA payloads makes sure I don't break anything.

Signed-off-by: Myles Watson <myles@pel.cs.byu.edu>
Acked-by: Ward Vandewege <ward@gnu.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3002 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-09 17:18:29 +00:00
Uwe Hermann
c716254e16 Fix up totally broken Super I/O config on the MS-6178. Add
PIRQ table to make most devices work. Random small fixes (trivial).

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2953 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-08 02:28:43 +00:00
Uwe Hermann
dde1d709a4 Fix abuild run of the MSI MS-6178 (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2773 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-13 09:55:44 +00:00
Uwe Hermann
a9838cf796 Add a common/global failover.c file which can be used by all
(or at least most) mainboards. This should put and end to
copy-paste'ing the same file again and again for every mainboard.

Fix the build for the MSI MS-6178 target (wrong location of the common
failover.c file).

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Corey Osgood <corey.osgood@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2772 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-13 08:38:24 +00:00
Uwe Hermann
41b88342b9 Add initial support for the Intel 810 based board MSI MS-6178.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Corey Osgood <corey.osgood@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2771 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-12 22:11:33 +00:00