Commit Graph

39743 Commits

Author SHA1 Message Date
Kyösti Mälkki b218c20c00 sb,soc/intel: Remove no-op APMC for C-state and P-state
Change-Id: I3c1aa7f68eb03f04ddb9c1a5e960e3e2050a029c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49250
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 10:37:13 +00:00
Kyösti Mälkki c1d524b8c6 sb/intel/common: Change some SMI logging
Change-Id: Ief0c3d36e6de6e18b7f2613f043ac4d31a193f9d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49249
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 10:35:46 +00:00
Kyösti Mälkki 9a1620f4ed cpu/x86/smm: Use common APMC logging
Unify the debug messages on raised SMIs.

Change-Id: I34eeb41d929bfb18730ac821a63bde95ef9a0b3e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49248
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 10:35:23 +00:00
Wisley Chen 5e6e5c11c7 mb/google/dedede/var/drawcia: Add support to handle pen detection
For board version 6 afterward, it will have external pull-up for
GPP_C12, and remove internal pull-up.

BUG=b:177618684
TEST=emerge-dedede coreboot, check evtest if SW_PEN_INSERTED event
(value:1/0) when insert/eject pen, and eject pen to wake system from s0ix

Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Change-Id: I503873afb48384168dcd8a822c7246655898356e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
2021-01-25 09:11:57 +00:00
chenzanxi 8130959d01 mb/google/kukui: Add panel for Katsu
Declare the following panel for Katsu:
- BOE_TV105WUM_NW0
- STA_2081101QFH032011_53G

BUG=b:176523929
TEST=build Katsu image passed
BRANCH=kukui

Change-Id: I59a02198bc0e13f2760677ae4ea3eb05eb883464
Signed-off-by: chenzanxi <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-25 09:11:31 +00:00
Chris Wang 5e0db41602 mb/google/zork: adjust the eDP panel power sequence
set pwron_varybl_to_blon to 0x5, which means fw will delay 20ms between backlight
on and vary backlight.

BUG=b:171269338
BRANCH=zork
TEST=Build; Verify the UPD was passed to system integrated table; measure
the power on sequence on dalboz

Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I8af35eee7777a8e71b42f0c128795290b8c2c93e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-25 09:11:17 +00:00
Chris Wang 3ec3cb82f9 soc/amd/picasso: Add UPDs for support eDP power sequence adjust
Add UPDs for eDP power sequence adjust
all pwr sequence numbers below are in uint of 4ms.

BUG=b:171269338
TEST=Build; Verify the UPD was pass to system integrated table; measure
the power on sequence on dalboz
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I6eceebd1c3f522e6a8dfaadc487a590107ae3131
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48864
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 09:11:03 +00:00
Chris Wang 27b149c30b soc/amd/picasso: Add UPDs for support eDP power sequence adjust
Add UPDs for eDP power sequence adjust.

BUG=b:171954512
BRANCH=zork
TEST=Build, verify the parameter pass to picasso-fsp

Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ic4bafd86ffb7804c4739f9d30beb67549b71d289
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-25 09:10:51 +00:00
Chris Wang 027b8b2ab9 mb/google/zork: add eDP tuning parameter to fix the eDP noise
needs to adjust the eDP phy setting to fix the eDP noise for WWAN.

DP_VS_LEVEL0_PREEMPH_LEVEL0, = 0x00 (0.4v 0db) swing 0, pre-emphasis 0)
COMMON_MAR_DEEMPH_NOM = 0x004B
COMMON_SELDEEMPH60 = 0x0
CMD_BUS_GLOBAL_FOR_TX_LANE0 = 0x80

BUG=b:171269338
BRANCH=none
TEST=Build; Verify the UPD was passed to system integrated table

Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ibe720e26d2257e05a989eaa1fd85d542005cf6a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48734
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 09:10:40 +00:00
Chris Wang 4e66d932c7 soc/amd/picasso: Set UPDs for tuning eDP phy
Add UPDs for edp phy tuning adjust.

BUG=b:171269338
BRANCH=zork
TEST=Build, verify the parameter pass to picasso-fsp

Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I389bc4b5726f70bb1edfd858dba1c575cf68050b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-25 09:10:27 +00:00
Angel Pons 244f455bd9 nb/intel/ironlake: Drop constant parameter
All callsites of `rmw_1d0` use the same `flag` value.

Change-Id: I84fab5d3fd270ce684cd6ca892c213b0d8610283
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-01-25 09:09:59 +00:00
Elyes HAOUAS 9c19a4fae8 mb/google/auron: Convert to ASL 2.0 syntax
Built google/auron (Lulu) provides identical 'dsdt.dsl' files.

Change-Id: I5728b220e88d4105fcf6e5cee78662bc80fa01d7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-25 09:09:43 +00:00
Idwer Vollering f0712795b0 util/board_status/board_status.sh: invoke md5 on FreeBSD
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Change-Id: I8d9493ce0c3fa97ea9c3c2f60a0106bb98bd8315
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49309
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 09:08:53 +00:00
Idwer Vollering a3c44d843c util/board_status/board_status.sh: improve mktemp behaviour on non-linux OSes
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Change-Id: I763b0e7c7c81a2447ed20db0a25047d106e30606
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49308
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 09:08:35 +00:00
Idwer Vollering 3c70774629 util/board_status/board_status.sh: improve getopt detection and usage on
non-linux OSes

Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Change-Id: Iba50d8a8609eda974f12b0d9802e04d7371aed5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49307
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 09:08:22 +00:00
Idwer Vollering 22bcb5643b util/board_status/board_status.sh: select the right gnu make binary
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Change-Id: I4523b1b235064f89c01530b47c9cb4c3c11c9761
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49306
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 09:08:08 +00:00
Angel Pons 64b88623cb nb/intel/sandybridge: Only run DMI recipe on Ivy Bridge
Reference code does not run any DMI recipe for Sandy Bridge. Create a
helper function and exit early for Sandy Bridge. The CPUID value will
be used in a follow-up, since DMI setup has stepping-specific steps.

Change-Id: I5d7afb1ef516f447b4988dd5c2f0295771d5888e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48413
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 09:07:30 +00:00
Angel Pons 77516ca792 nb/intel/sandybridge: Correct late DMI init sequence
Based on reference code, update the DMI ASPM setup steps.

Change-Id: I1248305b2f76f48f4e6910de1a6980e942f16945
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48536
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 09:07:24 +00:00
Elyes HAOUAS e515515e2e mb/libretrend/Kconfig: Remove duplicated string
Change-Id: Iab19538e1f5a74b714cb2a34855d9717315b9018
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by:  Felix Singer <felixsinger@posteo.net>
2021-01-25 09:07:02 +00:00
Elyes HAOUAS 6807204919 mb/51nb/Kconfig: Remove duplicated string
Change-Id: Ib184dbfef05608bbf18d49fee5cbc9dd12ed6751
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49883
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by:  Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 09:06:51 +00:00
Elyes HAOUAS 2266b33935 src/lib/: Remove "this file is part of" line
Change-Id: I9031dad52581e77aa56014b1fede884f2cdeb6de
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49882
Reviewed-by:  Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 09:06:37 +00:00
Michael Niewöhner d2c57f2a0c soc/intel/{skl,cnl,xsp,icl,tgl,ehl,adl,jsl}: use common LPC mirroring
Drop the old, redundant code for mirroring LPC registers to DMI and make
use of the new common code.

Select the new Kconfig option for LPC DMI mirroring by the option
SOC_INTEL_COMMON_PCH_BASE, which is selected by platforms starting with
SPT, except APL and Xeon-SP. For Xeon-SP, select DMI and the new Kconfig
directly.

APL, even though it's younger than SPT, does not need mirroring.

Test: Set LGMR address by calling `lpc_open_mmio_window` and check that
      both the PCI cfg and DMI LGMR register get written correctly.

Tested successfully on clevo/cml-u.

Change-Id: Ibd834f1474d986646bcebb754a17db97831a651f
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-25 09:06:10 +00:00
Michael Niewöhner f7e91d22d4 soc/intel/lpc_lib: mirror LPC registers to DMI when required
Starting with SPT, LPC registers IOD, IOE, LGIR* and LGMR need to be
mirrored to their corresponding DMI registers. Add the required writes
to DMI registers, where the PCI config registers get written.

This is already done in soc code for IOD, IOE and LGIR* by mirroring
the registers later, during PCH init. Also the code mostly matches
accross the platforms. This common implementation will avoid delayed
mirroring of the registers and also deduplicate the code.

This change also adds a new Kconfig that will be selected by platforms
requiring mirroring of LPC IO/MMIO registers to their corresponding DMI
registers.

For making use of this common code, the redundant soc code needs to be
dropped and the newly introduced Kconfig option has to be selected. This
is done in the follow-up change.

Change-Id: I39f3bf4c486a1bbc112b2b453381de6da4bbac4d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-25 09:00:12 +00:00
Kevin Chang 2efd6441c4 mb/google/dedede/var/boten: Add custom SAR values for Boten
Add Boten customized SAR table.

BUG=b:175931508
BRANCH=dedede
TEST=build and test no Boten

Change-Id: I3b00f56c8b890979cbf2155c97a3a064d8b0ba1a
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-25 08:58:09 +00:00
Tim Chen 1da9e35bc9 mb/google/dedede/var/magolor: Enable EC keyboard backlight
BUG=b:177288782
TEST=emerge-dedede coreboot chromeos-bootimage

Change-Id: I98f741da4a22494883939c4efe7960c66e71c6a7
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-25 08:58:02 +00:00
Martin Roth 0ad5fbd48d util: Update all shebangs to use /usr/bin/env
Instead of hardcoding paths to the executables, use the version in the
path.  This allows the scripts to work on more systems, and allows the
binary version to be changed more easily if needed.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ifcc56aa21092cd3866eacb6a02d198110ec6051d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-25 08:57:40 +00:00
Martin Roth 2cee2ff256 Documentation: Add documentation on jenkins builders
Put this in a new directory called 'infrastructure' and make a link
and an index.md file for the directory.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I54a0204e7525a25f2fd717a73007b304aac67396
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-25 08:56:27 +00:00
Benjamin Doron b339fbb79b drivers/intel/fsp2_0/header_display.c: Correct component_attribute check
According to FSP_INFO_HEADER structure in FSP EAS v2.0-v2.2,
BIT1 indicates an "official" build.

Change-Id: I94df6050a1ad756bbeff60cda0ebac76ae5f8249
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-25 08:56:13 +00:00
Seunghwan Kim b773729939 mb/google/dedede/var/sasuke: Enable bluetooth device
"usb2_ports[7]" for internal bluetooth device was configured as
'USB2_PORT_EMPTY' mistakenly in previous patch, so we need to enable
it again.

BUG=None
BRANCH=firmware-dedede-13606.B
TEST=Built and verified BT device existence with lsusb

Change-Id: Id2900152e23bbc2f454d064dc86a9e45e934ea0f
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-25 08:55:56 +00:00
Julius Werner ac80610b51 trogdor: Explicitly initialize display pins in bootblock
This patch adds explicit initializations for the remaining named display
(power) control GPIOs to the bootblock GPIO init code. These pins are
usually mapped to pins that are already configured to pull-downs on
power-on reset so this wasn't really required, but we have already moved
them around so often that you never know when EEs might one day move
them to a pin with a different power-on reset configuration, so it's
better to be explicit.

In one particular case, GPIO(67) (used by CoachZ rev1+ but not by
anything else for the EN_PP3300_DX_EDP pin) is not actually a pull-down
on boot, even though that is claimed by the datasheet. This is likely
due to the fact that it can serve as the SPI_HOLD pin for the boot flash
QSPI bus, so even though our board's boot flash doesn't really use that
pin, it seems that the boot ROM still configures it as such.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I533baa962d2dfc87cfa510f442ed2e8912e0e5b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: mturney mturney <mturney@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
2021-01-25 08:55:44 +00:00
Elyes HAOUAS ce66cd3e49 arm64/armv8: Set ARCH_ARMV8_EXTENSION depend on ARCH_ARM64
This will remove "ARCH_ARMV8_EXTENSION=0" from ".config" when unneeded.

Change-Id: Idd4ad67fb4a3efdb0864803f87c6b5f508fb4364
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-01-25 08:55:08 +00:00
Arthur Heymans 8331833c89 soc/intel/xeon_sp/cpx: Fix loading MCU on APs
Commit 393992f (cpu/mp_init: Fix microcode lock) fixed the semantics
of parallel loading microcode updates.

So now '*parallel = 1' really means loading MCU in parallel, which
seems to fail inconsistently on around 10% of the APs.

Change-Id: I755dd302abbb58537d840852e8e290bea282a674
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49671
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 08:54:51 +00:00
Raul E Rangel a626d2ed6f soc/amd/common/acpi: Add _UID for PNP0C02 devices
When MAINBOARD_HAS_SPEAKER is false, the SPKR gets _HID PNP0C02. This
conflicts with the LDRC device. PNP0C02 is also used other places in the
picasso code base, so I chose a random _UID for each device. The _UIDs
are unique in the code base so it's easy to search for duplicates.

BUG=b:175146875
TEST=Boot trembyle to linux

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I01be41515e011293e90a6b42b8e34de8ec3ffc18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-25 08:53:10 +00:00
Raul E Rangel f38dc8b11d mb/google/zork: Fix duplicate i2c_tunnel uid
This conflicts with the MSTH i2c_tunnel.

BUG=b:175146875
BRANCH=zork
TEST=Boot trembyle and inspect ACPI tables.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iac04c7dc361d427f5ebb99644aa70bd0c7dbb918
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-25 08:53:02 +00:00
Raul E Rangel c39f009739 soc/amd/picasso/acpi: Add UID for PCI INT devices
If a _HID/_CID are not unique, we need to add a _UID field to
differentiate the objects.

BUG=b:175146875
BRANCH=zork
TEST=Boot linux, dump ACPI table and verify UIDs are unique

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Icd2ccede2b6c2e332157e2eeca89fba14a46b360
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-25 08:52:53 +00:00
Martin Roth c6c64e844b util/crossgcc: Remove obsolete dockerfile
This file was added here before util/docker existed.  Anyone using this
dockerfile should use the coreboot-sdk docker container instead.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I7114abc9c91ba2d6fcfef80ae6e7d1a7a3d253cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-25 08:52:24 +00:00
Tim Wawrzynczak 2e3edcfbe0 mb/google/volteer/eldrid: Use #define symbols for usb2_ports config
It's easier to understand what these symbolic names mean rather than
using the constants; the static.c will will end up (indirectly)
including `soc/usb.h` therefore the macros are in scope here.

Change-Id: I5ef977a05a2522e177f32c99bfab74f9288ae869
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-25 08:52:01 +00:00
Kevin Chiu 845b65bf5e mb/google/zork: update USB 2.0 controller Lane Parameter for gumboz
From AMD USB phy specialist recommended that for DB port2 (type-A), port3 (type-C C1)
the most effective corrections for the depressed eye are
tx_rise_tune=0x0
tx_pre_emp_amp_tune=0x3
tx_fsls_tune = 0x3

BUG=b:173476380
BRANCH=zork
TEST=1. emerge-zork coreboot
     2. pass USB 2.0 SI eye diagram verification

Change-Id: Ib31c5d55e30b958d3e552e8d0b4a160947444636
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-25 08:51:26 +00:00
Kevin Chiu 5a27b75642 mb/google/zork: update USB 2.0 controller Lane Parameter for dirinboz
From AMD USB phy specialist recommended that for DB port2 (type-A), port3 (type-C C1)
the most effective corrections for the depressed eye are:
tx_rise_tune=0x0
tx_pre_emp_amp_tune=0x3
tx_fsls_tune = 0x3

BUG=b:165209698
BRANCH=zork
TEST=1. emerge-zork coreboot
     2. pass USB 2.0 SI eye diagram verification

Change-Id: I80afd6bf1257b9a72d0d7651b48d243ebaf5de2f
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-25 08:51:21 +00:00
Angel Pons cbde6410a0 mb/google/kahlee: Deduplicate now-equivalent mainboard.c
The only difference is an additional include that is no longer needed.

Change-Id: I0053d03aa4d05f5c0fa833d8634419b6667e38a7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49832
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 08:50:34 +00:00
Angel Pons e4abe7fd5a bayhub bh720: Configure VIH tuning via devicetree
There's no need to repeat the same code on every board.

Change-Id: I2e19decfe8609fa644e609673a56ee5109bafefa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49831
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 08:50:17 +00:00
Furquan Shaikh f06d046c10 soc/intel/tgl and tgl mb/google,intel: Use the newly added meminit block driver
This change uses the newly added meminit block driver and updates TGL
SoC and mainboard code accordingly.

TEST=Verified that UPDs are configured correctly with and without this
change.

Change-Id: I6d58cd6568b7bbe03c4e3011b2301209893e85a9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-25 08:48:57 +00:00
Furquan Shaikh 859ca18ced soc/intel/common: Add support for populating meminit data
This change adds support for a common block memory driver that can be
used for performing the required operations to read SPD data for
different memory channel DIMMs. This data can then be used by the SoC
code to populate different memory related UPDs.

Most recent Intel platforms follow a similar pattern for configuring
FSP-M UPDs for initializing memory. These platforms use one of the
following topologies:
1. Memory down
2. DIMM modules
3. Mixed

Thus, SPD data is either obtained from CBFS (for memory down topology)
or from on-module EEPROM (for DIMM modules). This SPD data read from
CBFS or EEPROM is then passed into FSP-M using SPD UPDs for different
channels/DIMMs as per the memory organization.

Similarly, DQ/DQS configuration is accepted from mainboard and passed
into FSP-M using UPDs as per the FSP-M/MRC organization of memory
channels.

Different memory technologies on a platform support physical channels
of different widths. Since the data bus width is fixed for a platform,
the number of physical channels is determined by data bus width /
physical channel width. The number of physical channels are different
depending upon the size of physical channel supported by the memory
technology. FSP-M for a platform uses the same set of UPDs for
different memory technologies and aims at providing maximum
flexibility. Thus, the platform code needs to format mainboard inputs
for DQ, DQS and SPD into the UPDs appropriately as per the memory
technology used by the board.

Example: DDR4 on TGL supports 2 physical channels each 64-bit
wide. However, FSP-M UPDs assume channels 16-bit wide. Thus, FSP-M
provides 16 UPDs for SPDs (considering 2 DIMMs per channel and 8
channels with each channel 16-bit wide). Hence, for DDR4, only the SPD
UPDs for MRC channel 0 and 4 are supposed to be used.

This common driver allows the SoC to define the attributes of the
platform:
1. DIMMS_PER_CHANNEL: Maximum DIMMs that are supported per channel by
any memory technology on the platform
2. DATA_BUS_WIDTH: Width of the data bus.
3. MRC_CHANNEL_WIDTH: Width of the channel as used by the MRC to
define UPDs.

In addition to this, the SoC can define different attributes of each
memory technology supported by the platform using `struct
soc_mem_cfg`:
1. Number of physical channels
2. Physical channel to MRC channel mapping
3. Masks for memory down topologies

Using the above information about different memory technologies
supported by the platform and the mainboard configuration for SPD,
the common block memory driver reads SPD data and provides pointers to
this data for each dimm within each channel back to the SoC code. SoC
code can then use this information to configure FSP-M UPDs
accordingly. In addition to that, the common block driver also returns
information about how the channels are populated so that the SoC code
can use this information to expose DQ/DQS information in FSP-M UPDs.

This driver aims at minimizing the effort required for supporting
different memory technologies on any new Intel SoC by reducing per-SoC
effort to a table of configurations rather than having to implement
similar logic for each SoC.

BUG=b:172978729

Change-Id: I256747f0ffc49fb326cd8bc54a6a7b493af139c0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49040
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25 08:48:38 +00:00
Bora Guvendik 99157c1f4a soc/intel/tigerlake: Disable Internal Gfx based on SOC_INTEL_DISABLE_IGD
Make IGD disable when mainboard user selects SOC_INTEL_DISABLE_IGD.

Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ib297b339ce15ccb9212da32b27022610bc8aa2b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-01-25 08:48:24 +00:00
Elyes HAOUAS 61ab526971 mb/asus/p5ql-em/Kconfig: Drop 'select ARCH_X86'
ARCH_X86 is already selected.

Change-Id: I2be69e0b7a1889794121ed94380e543ac420218b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-25 08:47:08 +00:00
Angel Pons 21f9650b7f soc/intel/broadwell: Improve LPD0/LPD3 SerialIO ACPI methods
Creating named objects within a method is highly inefficient. So, pass a
reference to the OperationRegion field that needs to be updated instead.

Change-Id: I88272fc5cbe35427ccb5fc50789d47b66ace88fe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-24 23:26:05 +00:00
Angel Pons 9f0093d208 cpu/intel/model_2065x: Drop configurable TDP copy-pasta
Configurable TDP is only supported by Ivy Bridge onwards.

Change-Id: I8a742ab6d9d22b325ed725df4f749955efb3028f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-24 23:23:43 +00:00
Angel Pons 00d66603db cpu/intel/model_2065x: Drop unused c-state code
None of the mainboards have the magic SpeedStep device, so the C-state
generation function bails out without doing anything. Moreover, this
code is broken and was copied from Sandy Bridge. Thus, drop it.

Change-Id: I580157ee33c599af5fc48b06eeb39cb32c9831ec
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-24 23:23:35 +00:00
Angel Pons ae4eba9be5 soc/intel/broadwell: Drop enable check from LPD0/LPD3
When SerialIO devices are disabled, their _STA method evaluates to 0,
which means the device is not present. It is expected that OSPM would
not attempt to change the power state of a device that is not present.
Lynxpoint does not have these checks, thus remove them from Broadwell.
Also remove the now-unused Arg1 parameter to avoid warnings from IASL.

Change-Id: Ic5e999ac1171ce49db66bec45c58d8aa5711ec53
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24 23:23:24 +00:00
Angel Pons 0ec903a73b Doc/mb/lenovo/Sandy_Bridge_series.md: Clarify installation
Unlike Ivy Bridge series, there isn't a method to flash coreboot
internally when running vendor firmware (yet). Until someone finds a way
to bypass flash protections, the first flash has to be done externally.

Change-Id: Idaff264f2b7277516d69d1323f1a0c885b28c3db
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-24 23:21:23 +00:00