cbfstool-clean target to the Makefile.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4371 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
didn't look into it enough to know why fssize is 32 bytes larger than the
offset. There may be another bug here. Maybe something with the CBFS header
not being included or excluded from the calculation?
Anyway, this patch fixes it for all cases size > 32.
I also changed the error message so that it doesn't look like the ROM is full
just because it can't find room for a file.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4370 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware by Andrew Morgan <ziltro@ziltro.com>, boots
Linux fine. Detailed status at:
http://www.coreboot.org/Soyo_SY-6BA_Plus_III
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Andrew Morgan <ziltro@ziltro.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Its used for Name and Scope and Processor now. As bonus, it allows to
create a multi name paths too. Like Scope(\ALL.YOUR.BASE).
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4368 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4366 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, enable HIGH_TABLES support for this board.
The HIGH_TABLES failed with:
No matching ram area found for range:
[0x00000000000f0000, 0x0000000000100000)
Ram areas
[0x0000000000000000, 0x0000000000001000) Reserved
[0x0000000000001000, 0x00000000000a0000) RAM
[0x0000000000100000, 0x000000000fff0000) RAM
[0x000000000fff0000, 0x0000000010000000) Reserved
SELFBOOT RETURNED!
Boot failed.
The fix was to change northbridge.c as follows:
- ram_resource(dev, idx++, 1024, tolmk - 1024);
+ ram_resource(dev, idx++, 768, tolmk - 768);
This is build-tested and tested on hardware by me. It boots fine,
for instace with SeaBIOS and the standard GRUB1 from my disk.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add initial ACPI support for M57SLI.
Activates/Enables:
* native Coreboot ACPI for M57SLI
* Soft-Power-Off
* PowerNow!
* High Precision Event Timer
* Windows booting with ACPI support
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4364 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
[base address] parameter is supplied on the command line... This patch fixes
random segfaults when using 'cbfstool add'.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4363 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
updating the passed value to the next link offset even when it was on the
requested link (cap_count).
Maximilian also found a bug where the linktype was still getting attributes
even when it wasn't initialized.
This should fix the HT problems for Fam10 C2. There are still issues with the
microcode which need to be resolved.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4358 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
ways superior to v3, while lacking its completeness. But, one nice
thing: no more included .S or .c files. It's all separate compilation.
That should allow our Makefiles to work much better.
Note that the current non-CAR implementation is the default and
continues to work (tested FILO boot to Linux on both CAR and non-CAR).
Index: src/mainboard/emulation/qemu-x86/Config.lb
Change this to be sensitive to USE_DCACHE_RAM. All settings etc. that
depend on this variable are grouped in one if, and the other parts
(romcc etc.) are in the else. This change is a model of how we should be
able to do other motherboards.
Index: src/mainboard/emulation/qemu-x86/Options.lb
add needed options.
Index: src/mainboard/emulation/qemu-x86/failover.c
remove code inclusion from this not-yet-used file.
Index: src/mainboard/emulation/qemu-x86/rom.c
This is the entry point for the rom-based code. Called stage1.c in v3.
Index: src/lib/Config.lb
change initobject to a .o from a .c; this fixed a build problem.
Index: src/pc80/serial.c
make uart_init non-static.
Index: src/pc80/Config.lb
add initobject
Index: src/arch/i386/init/entry.S
Entry point. Unify a bunch of files that were fiddly lttle includes. From v3.
Index: src/arch/i386/init/ldscript.ld
new file. The goal is to hang all init changes for CAR here, to minimize other changes to any
other ldscript. Besides, putting this in init makes sense; entry and car are manage init.
Index: src/arch/i386/init/car.S
generic i386 car code from v3.
Index: src/arch/i386/init/ldscript_fallback_cbfs.lb
Fix what looks like a bug: this was not including the init.text section.
Index: targets/emulation/qemu-x86/Config.lb
push up the console loglevel. qemu is for debugging so we might as well
get all the debugging we can.
Index: targets/emulation/qemu-x86/Config-car.lb
For CAR bullds.
Signed-off-by: Ronald G. minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4357 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Abuild tested and boot tested on s2895 and serengeti_cheetah.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4355 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
gets us through config, but it fails during build because the original patch
duplicated some files for VIA systems.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4354 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
if it is already in its correct location.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4353 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
cbfs files at fixed addresses.
I call this transitional as the approach I am taking is to add
capability to cbfstool but not change code in a way that will break
existing usages. Later, once we're sure nothing has broken, we can start to
smooth the edges.
Right now, fixed address file are only supported via the add command.
There is one additional command syntax, so, example:
cbfstool add rom romstrap optionrom 0xffffd000
Will add the file to that fix location for a romstrap.
The assumption is that the ROM is based at the end of a 32-bit address
space. As you can see from the code, that assumption can easily be
over-ridden, if we ever need to, with a command option.
Here is one example output result.
rminnich@xcpu2:~/src/bios/coreboot-v2/util/cbfstool$ ./cbfstool x.cbf print
x.cbf: 1024 kB, bootblocksize 32768, romsize 1048576, offset 0x0
Alignment: 16 bytes
Name Offset Type Size
h 0x0 optionrom 251
0x130 free 917120
h3 0xdffe0 optionrom 251
0xe0110 free 97960
The way this is implemented is pretty simple. I introduce a new
operator, split, that splits an unallocated area into two unallocated
areas. Then, allocation merely becomes a matter of 0, 1, or 2 splits:
0 split -- the free area is the exact fit
1 splits -- need to split some off the front or back
2 splits -- need to split off BOTH the front and back
I think you'll be able to see what I've done. I call this transitional
because, in the end state, we only need one allocate function; for now
I've left two in, to make sure I don't break compatibilty.
Why I like this better than ldscript approach: I like having the
ROMSTRAP located by cbfs, not linker scripts. For one thing, it makes
romstrap visible as a first class object. I think I would have latched
onto a problem I was having much more quickly had I remembered the
ROMSTRAP. It gets lost in the linker scripts.
At this point, we should be able to start removing special ROMSTRAP location
code from linker scripts.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4351 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Make get_dsdt script executable.
- Rename DrivingClkPhaseData.c to driving_clk_phase_data.c.
- Set proper IRQ_SLOT_COUNT value in the hope that the '14' from irq_table.c
is correct.
- Fix broken or incorrect #include names to increase likelyhood of a
successful compile.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4350 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
files for targets without failover:
src/config/nofailovercalculation.lb (64 kB XIP)
src/config/nofailovercalculation128.lb (128 kB XIP)
Targets with other XIP sizes were ignored.
This patch moves XIP size back into mainboard code.
Benefits from this patch:
- src/config/nofailovercalculation128.lb is no longer needed
- Targets with XIP sizes besides 64k and 128k benefit from refactoring
- Conceptually, this makes the include files pure calculation files
without settings.
Abuild tested.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
same. The errata need some extra room in failover.
Trivial and abuild tested
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4347 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Compared to posted patch, there are whitespace fixes
(request by Uwe), and a guard to run the erratum only
on AMD_RB_C2 (request by Marc).
Signed-off-by: Marco Schmidt <mashpb@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4346 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Marco Schmidt <mashpb@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4345 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
instead of coreboot.strip. That fixes the normal
image because the calculations for its offset in
the ROM match reality again.
This requires changes in CBFS configurations to
minimize the bootblock size. These are also done
for CBFS boards.
Other than this a couple of minor fixes are in this
patch:
- make asus/m2v-mx_se build with abuild with a
crosscompiler
- move CONFIG_CBFS for hp/dl145_g3 to Options.lb
as it's done everywhere else
- change the default config of abuild to not
provide ROM_IMAGE_SIZE values for the images
in a CBFS configuration
- change abuild's crosscompile autodetection to
not try to use "i386-elf-i386-elf-gcc" (which
is bogus)
Except for the latter two abuild changes (both
in util/abuild/abuild), they're available as
patch set on the mailing list in a mail from
2009-06-05 titled
[PATCH]es to get normal image to work again with CBFS
The changes in util/abuild/abuild are trivial and
abuild tested.
As discussed on the list,
targets/hp/dl145_g3/Config-abuild.lb is
deleted, now that Config.lb works again.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The patch has been submitted by bari <bari@onelabs.com> and written
by OLPC.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4342 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
them a bit more verbose and hopefully more understandable.
Old messages for my machine with 5 GB:
RAM: 0x00400000 kB
Ram3
[...]
Initializing memory: done
RAM: 0x00500000 kB
New messages:
RAM end at 0x00400000 kB
Adjusting lower RAM end
Lower RAM end at 0x003f0000 kB
Ram3
[...]
Initializing memory: done
Handling memory hole at 0x00300000 (default)
RAM end at 0x00500000 kB
Handling memory mapped above 4 GB
Upper RAM end at 0x00500000 kB
Correcting memory amount mapped below 4 GB
Adjusting lower RAM end
Lower RAM end at 0x00300000 kB
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Any endless loop after die() can be eliminated.
Dereferencing a NULL pointer is bad. die() instead.
Replace endless loops with die().
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4340 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
starts to play its role. Then the system hangs at HDA init. I dont know what the
VC1 is. The RPR says "Optional Features (only needed if CMOS option is enabled)"
in 5.10.2. Before I know what it is, I think it is better to skip it.
Tested on dbm690t.
Add comment from Rudolf,
"
VC is virtual channel. Its used for isochronous transfer of data to sound card.
The virtual channel guarantee "on time" delivery. In other words it sets up a
channel for data to sound card, which means that that arrivs in time and there will
be no interuptions in audio stream.
http://www.microsoft.com/whdc/connect/pci/wlp_interrupt.mspx
"
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4339 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
function based on test results with many different DIMMs.
Tested by Uwe Hermann <uwe@hermann-uwe.de> on hardware.
Might need a small increase of ROM_IMAGE_SIZE for some boards, we'll see.
Signed-off-by: Elia Yehuda <z4ziggy@gmail.com>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4338 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
code, specifically the difference between pre_f and f code.
The only functional changes are in printk statements. The rest is white space.
1. Remove some #if 0 and #if 1 blocks
2. Remove #if USE_DCACHE_RAM blocks. All K8 boards use CAR.
2. Correct typos (canidate -> candidate)
3. Try to minimize the differences between amdk8_f.h and amdk8_pre_f.h
4. Try to minimize the differences between raminit.c and raminit_f.c
5. Make boards that have rev_f processors include the correct raminit code
There is much more that could be done, but it's a start.
Abuild tested and boot tested on s2892 and serengeti_cheetah.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4337 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
1. In rs690_cmn.c, mask the lower 4 bits of the BAR3. No doubt, right?
2. In rs690_pcie.c,
(1) Obviously, the mask should be 0xF, and bit 19 should be set to 1 (in comment).
In rpr 5.10.2, step 2, step 2.1 & step 2.6
(2) The dynamic buffer allocation is enabled by setting bit 11 of PCIEIND: 0x20,
instead of PCIEIND_P: 0x20.
In rpr 5.10.2, step 5. Dynamic Slave CPL Buffer Allocation
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4336 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This reverts commit eb7bb49eb5b48c39baf7a256b7c74e23e3da5660.
Stepan pointed out that "s" means string, which makes the following statement
in this commit message invalid: "Since we either have reserved space (which
we shouldn't do anything with in these two functions), an enum or a
hexadecimal value, unsigned int seemed like the way to go."
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Luc Verhaegen <libv@skynet.be>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4335 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This reverts commit c03527377db5951f0d3228e2a93b4c57dd81b8ec.
Stepan pointed out that 's' means string, and that therefor strings do exist.
Marking this as reserved breaks some payloads.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Luc Verhaegen <libv@skynet.be>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4334 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The kontron 986lcd_m cmos.layout had a 512bit area claimed for "boot_devices".
The changes to the cmos code no longer allow usage of values larger than
32bits. Since this option was completely unused, mark it as reserved.
Fixes build after the get_option change (r4332)..
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Luc Verhaegen <libv@skynet.be>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4333 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
To ease some of my debugging pain on the unichrome, i decided i needed to
move FB size selection into cmos, so i could test a size and then reset it
to the default after loading this value so that the next reboot uses the
(working) default again. This meant implementing set_option in parallel to
get_option.
get_option was then found to have inversed argument ordering (like outb) and
passing char * and then depending on the cmos layout length, which made me
feel quite uncomfortable. Since we either have reserved space (which we
shouldn't do anything with in these two functions), an enum or a
hexadecimal value, unsigned int seemed like the way to go. So all users of
get_option now have their arguments inversed and switched from using ints
to unsigned ints now.
The way get_cmos_value was implemented forced us to not overlap byte and to
have multibyte values be byte aligned. This logic is now adapted to do a
full uint32_t read (when needed) at any offset and any length up to 32, and
the shifting all happens inside an uint32_t as well. set_cmos_value was
implemented similarly. Both routines have been extensively tested in a
quick separate little program as it is not easy to get this stuff right.
build_opt_tbl.c was altered to function correctly within these new
parameters. The enum value retrieval has been changed strol(..., NULL, 10)
to stroul(..., NULL, 0), so that we not only are able to use unsigned ints
now but so that we also interprete hex values correctly. The 32bit limit
gets imposed on all entries not marked reserved, an unused "user_data" field
that appeared in a lot of cmos.layouts has been changed to reserved as well.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4332 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
with an error code now.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4329 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
directory just with one common file.
Changes to FADT: move to rev4, fix the generic register descriptors, detect additional VT8237S features.
Change the compiler to CORE , its revision to 42.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4327 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
out. Fix the libgcc dependency on abort() due to nested functions.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4326 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4325 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4324 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
version that has all assembler in a .S file and all C code in a .c
file. Also, remove requirement to move around between GDTs.
This version includes the suggestions from Peter to clean up CR0 manipulation
and to guard critical code paths by cli/sti. Tested and working on my hardware.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4323 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Arjan Koers