The name was wrong. mFCPGA478 is actually a pseudonym for mPGA478MN,
the successor of the socket that was meant.
The official name of this socket is mPGA478MT. But "Socket M" is much
easier to distinguish.
Change-Id: I4efeaca69acddfcdc5e957b0b521544314d46eeb
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Because coreboot's asserts aren't fatal by default, scan-build finds
problems in code that is actually protected by an assert. This
change fixes that and allows us to add asserts to protect
against other failures.
Change-Id: I9fa605d6309bb40a9cef33b434c9256bf731f457
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/31650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
* Introduce a measured boot mode into vboot.
* Add hook for stage measurements in prog_loader and cbfs.
* Implement and hook-up CRTM in vboot and check for suspend.
Change-Id: I339a2f1051e44f36aba9f99828f130592a09355e
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Upstream intelmetool is out of date; I suggest I archive it
instead of trying to merge coreboot's changes into it.
However I would like to preserve the licensing of files in the tool
as GPLv2+ where possible instead of GPLv2-only.
Change-Id: I47b1ff2734f54c65f4214b39244bd868ef44b83c
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/c/31587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
VBT on Intel(R) systems is available via sysfs as
/sys/kernel/debug/dri/0/i915_vbt
However the size of this file reads as 0 causing
intelvbttool to fail. This patch implements incremental reads
with realloc for such cases or whenever the file size is not
available (e.g. reading from stdin).
After this patch is applied, intelvbttool can be used as follows:
sudo intelvbttool -f /sys/kernel/debug/dri/0/i915_vbt -d
Change-Id: I5d17095a5747550b7115a54a7619b7294a846196
Signed-off-by: Alex Feinman <alexfeinman@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/31531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Allow EC region to be readable by BIOS/CPU so that flashrom
can read it.
BUG=b:123199222
TEST=Build coreboot with CONFIG_LOCK_MANAGEMENT_ENGINE set,
run firmware_LockedME test.
Change-Id: I306c74a0893355e57632a22a712b1f4fdaa19306
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/31377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Put the FMAP FMAP region right above the coreboot CBFS region.
The other regions like RW_MRC_CACHE and CONSOLE often have alignment
requirements so it makes sense to put those on top. This also
simplifies the code the generate the default fmap a little.
Change-Id: I24fa6c89ecf85fb9002c0357f14aa970ee51b1df
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30419
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The coreboot table entry containing the memory entries can have
fields unnaturally aligned in memory. Therefore one needs to perform
an aligned_memcpy() so that it doesn't cause faults on certain
architectures that assume naturally aligned accesses.
BUG=chromium:925961
Change-Id: I28365b204962ac89d65d046076d862b6f9374c06
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Manoj Gupta <manojgupta@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Now running 1.8.3, with a fix to the theme so search still works, and
a recommonmark version that properly rewrites links to .md files.
Change-Id: Ice25554c77a398a71782c8d1cb9e205debd80d67
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Version 2 IFD will have flmstr5 as EC region access control, consider it
during descriptor lock/unlock process.
BUG=N/A
TEST=Build coreboot with CONFIG_LOCK_MANAGEMENT_ENGINE set, and check
flmstr5 value by hexdump the SPI image at offset FMBA+0x90.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I970064dcf6114a15f054ab7c44349841deb99dc8
Reviewed-on: https://review.coreboot.org/c/31111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Cannonlake and Icelake have same read/write region permission settings
with skylake and kabylake, so add it here as well.
BUG=b:123199222
TEST=Turn on CONFIG_LOCK_MANAGEMENT_ENGINE and build image, check the
setting matches 0x0D for read and 0x04 for write.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I71d8b815c7dff7dcbcff2bf77c85ebf80b8df6d2
Reviewed-on: https://review.coreboot.org/c/31104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This reverts commit 48c24ce5ee.
Reason for revert: Commit broke bincfg, and sym_table as a global
variable is less bad than passing it around in function calls.
Change-Id: Ib8d64a1dc201d17a4e278ab0114958b6807a45ac
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
F81866 detection tested with the iBASE SI-613:
superiotool r4.9-420-g034e5e6
Found Fintek F81866 (vid=0x3419, id=0x1010) at 0x4e
F8196* detection is based on chip IDs provided by iBASE, but untested.
Change-Id: I7210e1523a188a8593cd03547bb0c95cd3e7aa39
Signed-off-by: Kyle Stevenson <kstevenson@comqi.com>
Reviewed-on: https://review.coreboot.org/c/31052
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Converts `auto.conf` to an Ada spec file. Write to
$(obj)/cb-config.ads and set the package name to
`CB.Config`.
Change-Id: I97c060d8a613c74a82a18aff9524ad4b01f9df56
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With the memory controller the separate sockets becomes a useless
distinction. They all used the same code anyway.
UNTESTED: This also updates autoport.
Change-Id: I044d434a5b8fca75db9eb193c7ffc60f3c78212b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/31031
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On FreeBSD, this test was failing with the error:
"grep: Argument list too long"
- Remove support for testing coreboot not in a git repo. Many of
the other linters already don't support this.
- Use git grep to find offending files, then xargs to print out
the lines.
Change-Id: Ic017dc3465fd9a46ff4e6ec5ef16396e963483cd
Signed-off-by: Martin Roth <martinr@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/28448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
After merging util/crossgcc: derive date and version from latest commit
(https://review.coreboot.org/c/coreboot/+/30804),
crossgcc build is broken in internal repository due to long version
name;coreboot.org repository is ok because it uses short tag name.
The patch uses "git describe" which is dependent on git tag name.
If tag name is little bit long, it can cause crossgcc build failed.
To avoid this issue, use only short version of hash string
which is fixed length. And it's enough as version string,
because we also use date(CROSSGCC_DATE) together.
TEST=Build crossgcc in both coreboot.org and internal repository
which uses longer tag name and check version string in build log.
Change-Id: I405b2e4e5c05831c25aebf1c73a281adab8ef452
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-on: https://review.coreboot.org/c/31001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With commit aaced4a (cpu/intel/common: Use a common acpi/cpu.asl file),
some model_206ax code was moved to a common place. However, autoport
was not updated accordingly.
Change-Id: I51b7e9c5d226f591596c33d6a3cb326a34420493
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30967
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add ITE8528 which can be found on the wedge100s.
Most registers are dumped from hardware.
No datasheet is publicy available.
Change-Id: I24b12c0032157a4959336f8b51dadbe7b2e09d66
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It was only hooked up for galileo board when using the obsolete
FSP1.1. I don't see how it can be useful...
Change-Id: Ifd7cbd664cfa3b729a11c885134fd9b5de62a96c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30691
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This way date and version are automatically updated when util/crossgcc
was changed, the version contains the commit ID and we have less churn
on these variables.
Change-Id: I475ba9578a8bb421d7c342d2569d7de7fcf4161d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The old version was unnecessarily complex and allowed one region to
include the other.
Change-Id: Ibf7faf8103c8945b82c3962b5a7b82c3288b871f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30673
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fixes getting a dump of GPIO registers for these devices.
Change-Id: I80f05a170152969ba45d6aee33ab7ed5296ee496
Signed-off-by: Shaleen Jain <shaleen@jain.sh>
Reviewed-on: https://review.coreboot.org/c/30604
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Based on IT8786E-I V0.4.1 datasheet with following remark:
"Please note that the IT8786E-I V0.4.1 is
applicable only to the D version."
Signed-off-by: Kyösti Mälkki <kyosti.malkki@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ibf6e290abb01ae1b6b28173a83e88d1d99663ad4
Reviewed-on: https://review.coreboot.org/c/30334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Use the `git-format' tool to sanitise coreboot commits such that
they conform to coreboot's coding style.
This fancy piece of machinary allows one to have LibFormat from
Clang to automatically check your commit conforms to coreboot's
coding style, fix any issues automatically and provides you a
diff you may review and apply at your convenience.
N.B. When the `clang-format' binary is not found we issue a warning
that the test was skipped and carry on as usual. Hence, this is
strictly non-enforcing at this current time. You may use it at your
leisure.
Change-Id: If49017ea82f0707efd47cae5978a286a9af8f3b7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: https://review.coreboot.org/c/8037
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update to latest version of iasl:
(From the acpica.org changelogs)
* Fixed a regression introduced in version 20180927 that could cause the
compiler to fault, especially with NamePaths containing one or more
carats (^). Such as: ^^_SB_PCI0
* Added a new remark for the Sleep() operator when the sleep time
operand is larger than one second. This is a very long time for the
ASL/BIOS code and may not be what was intended by the ASL writer.
* Implemented detection of extraneous/redundant uses of the Offset()
operator within a Field Unit list. A remark is now issued for these.
For example, the first two of the Offset() operators below are
extraneous. Because both the compiler and the interpreter track the
offsets automatically, these Offsets simply refer to the current
offset and are unnecessary. Note, when optimization is enabled, the
iASL compiler will in fact remove the redundant Offset operators and
will not emit any AML code for them.
Change-Id: I46a1b1be44328aa2172f4741e9fd0c9b0f4e0430
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/28944
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The existing code has several messages that are only printed when the
DEBUG variable is set. These messages are not verbose, and are quite
useful to see how the script is progressing. So, print them
unconditionally.
Change-Id: I8f78e4563f0b4a42f831194a6e526284c2fbcd92
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
crosfirmware.sh has dependencies that might not be installed on some
systems. If a dependency is missing, provide a clear message about the
issue and how to resolve it.
Change-Id: I265bd03666f1273d3c22b60aae860c48c758005b
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30549
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's quite useful to know the download progress, as it can take a while
even with a fast connection. For example, the peppy recovery image is
~600 MiB. It also lets the user know that disk space is being filled.
Change-Id: I8c175f9095478ffe33c95b7ef9907c25b5f10f8c
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30548
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On some systems, such as Debian 9.6, `parted` and `debugfs` are located
in /sbin. Adding /sbin to PATH means that this script can work when run
as a regular user.
Change-Id: I151dba467e2b196f13093334273dae8a05865491
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It's the common name.
Change-Id: Iafa793b961847b2c98282fd035ea96ddf6109012
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
A release may be done from an older commit. It's also not a problem as
commits are stored in the reflog (unlike local changes that the script
guards properly).
Change-Id: I26f1c16c1cdfc9e77e28528b3327ce30c5b82b19
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
It's a separate package on debian, so it may not be installed with perl.
Change-Id: Id82661e1d7e6a025f5b207e3bd61669abc32d328
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Similar to i686 on x86_32, compile for nocona on x86_64.
Nocona is the first Pentium 4 CPU that has long mode support.
Required for 64bit support.
Change-Id: Ied28f98f89610a748be8d66cf35814e9112a4407
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/29877
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
They were not originally printed, and serve no good purpose, so let's
remove them again.
Change-Id: I4e00477f2e143f93fd27ba6a083977a667a3eb48
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/28829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Carl-Daniel made this script a long time ago but it never was picked up
in the tree. Now that USB debugging is way more common it makes
sense to include it.
I have made a number of changes to the original version:
* -h help text
* check for running as root
* enhanced readability (test -> if)
* new execution flow and refined output that better shows the device(s)
attached to the debug port(s)
* handling of Intel rate-matching hubs
* hiding of (bogus) error messages from lspci and lsusb
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Change-Id: Iadf775e990f5c5f91a28d57e3331d1f59acee305
Reviewed-on: https://review.coreboot.org/c/9305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add support for relocations on x86_64.
Required for 64bit romstage.
Change-Id: I1ff223d3476776297b501813a953356dd6fa9d67
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/30115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Add support for 64bit rmodule, as required for relocatable
ramstage on x86_64.
Change-Id: I7fbb3b4c0f76ce82c090b5f16f67a728b6bf94a5
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/29874
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In commit eceba31c7f ("util/lint: Set "acknowledgement" correct"), the
word "acknowledgement" was removed from util/lint/spelling.txt. A more
robust solution is to comment it out, as done for "sepc" in commit
afa5ec8d5f ("util/lint: Update spelling.txt to latest linux version").
Change-Id: Ia976dedc9b31190d22e7b946f14709d5c4577f71
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
util/util_readme/util_readme.sh is specifically a bash script and
requires bash-specific features such as "[[". It doesn't work when run
with a "sh" shell that only implements POSIX features, such as dash.
Thus, tell the user to run the script directly, in which case the #!
line is used.
Change-Id: I5706ffe857c5a148e9776571a377ad8647f9a4c2
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
94b761c8e (util/board_status: run dmesg with sudo) attempted to
fetch the console as root locally but instead sudo was put in front
of the remote path which runs as root anyways.
Also unless quotation marks are used the cmd function will see 'sudo'
and 'dmesg' as separate aruguments.
Change-Id: Ib9e9e4b443f4e3ad04c5fda2c2ce626255a190f2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The gerrit docs aren't very explicit about it, but file:"^foo$" is more
robust than file:^foo$.
Change-Id: I16c7d972d365cd04ca5fbb78012ad4eaad667be6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/29781
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TEST=on Chromebook Kevin with 64bit userland, it works well.
Change-Id: If16065000214c6cff9c14a14c5b5f44faca38153
Signed-off-by: Adam Kallai <kadam@inf.u-szeged.hu>
Reviewed-on: https://review.coreboot.org/c/29978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
POWER8 is a specific implementation of ppc64, which is by now outdated
(POWER9 has been on the market for a while). Rename arch/power8/ to
potentially cover a wider range of hardware.
TEST=Toolchains built before/after this commit can build coreboot for
emulation/qemu-power8 from before/after this commit.
Change-Id: I2d6f08b12a9ffc8a652ddcd6f24ad85ecb33ca52
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/29943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
The reason for this code cleanup is the legacy
Google Purin board which isn't available anymore
and AFAIK never made it into the stores.
* Remove broadcom cygnus SoC support
* Remove /util/broadcom tool
* Remove Google Purin mainboard
* Remove MAINTAINERS entries
Change-Id: I148dd7eb0192d396cb69bc26c4062f88a764771a
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29905
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The P2SB (PCI to Side-Band) bridge is on a different PCI device on APL.
Hence, we have to decide based on the LPC ID which device to query.
Also fix a comment.
Change-Id: Ie20d7d2d246629d085bcf4740ba28b1e81e6a12a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/29896
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On the updated builder image, the build is failing because the system
compiler has been updated to GCC 8.2.0. It complains about the
possibility of overflow when putting one 30 character buffer plus 2
characters into another 30 character buffer. To fix this, increase
the recipient buffer size by 2.
romcc.c:3645:2: note: 'sprintf' output between 3 and 32 bytes into a destination
of size 30 [-Werror=format-overflow=]
sprintf(buf, "\"%s\"", scratch);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
romcc.c:3649:2: note: 'sprintf' output between 3 and 32 bytes into a destination
of size 30 [-Werror=format-overflow=]
sprintf(buf, "\"%s\"", scratch);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: I7879a7202cc3ff52301b10118fc49fcc601f133e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/29850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
aligned_memcpy() was introduced to fix issues with platforms that don't
allow unaligned accesses to areas mapped with /dev/mem, but we missed a
few spots. Fix them.
Change-Id: I97ea953455b41a50023ceaca7eb148d60e6b8097
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/29848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
One common issue with the toolchain is that it takes a very long time
to build while it's somewhat volatile inside the coreboot tree.
Installing the toolchain elsewhere helps keep it safe but since there
is no reliable default location outside the tree, keep the default
as is.
Change-Id: Ic414cddfd3c7097412f3f2c3c7ec7b7191fa32de
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/29826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Field 'OEMID' & "OEM Table ID" are related to DSDT table
not to mainboard.
So use macro to set them respectvely to "COREv4" and
"COREBOOT".
Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: David Guckian
There is already a function with the name buffer_size(). Adding a local
variable with the same name will lead to the following error on older
GCC versions (e.g. version 4.4.7):
declaration of 'buffer_size' shadows a global declaration
To fix this rename the local variable to buffer_len.
Change-Id: Ifae3a17152f2f9852d29a4ac038f7e5a75a41614
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Header contains ':' in copyright line. rmdoule is a typo
Remove the ';' and correct typo to rmodule.
BUG=N/A
TEST=N/A
Change-Id: I05b1fb80a81682646c9fba3d234de235b6bc9e8c
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
The GPT version must be "00 00 01 00" and the little endian should be
represented as 0x10000.
Please refer to: https://en.wikipedia.org/wiki/GUID_Partition_Table
Change-Id: Ib025197fc96f32823e687a89de0cee51c952b031
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/c/29767
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version.
This will cause the AML interpreter to use 32-bit integers and math
if the version is 1, and 64-bit if the version is >=2.
Current spec version is 2 for ACPI 6.2-a.
Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29626
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The purpose of this tool is to manipulate and get information about the
`Back Up Control, Top Swap` mechanism present on most Intel Southbridges.
This tool is initially written by Peter Stuge.
This tool makes it possible to have a backup mechanism for the
bootblock by using the southbridges Back Up Control Top Swap.
Sometimes it is also possible to circumvent vendor write protection mechanisms
in order to flash coreboot. An example of where this would be useful would be
the Lenovo Thinkpad X60 and T60.
Change-Id: I12cc2e91396f096fc979e23848e1929cb6c44fc5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18224
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Newer kernels only allow root to access the kernel log buffer.
In another case (cbmem) we use sudo to get past that, so we can
expect sudo to be available here, too.
Change-Id: I654422992e5ba1e98a786f65d50289efbcd46602
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/29670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Python 3 is the default Python interpreter on most modern systems.
Python 2 scripts must specify they should be run with Python 2 in their
shebang. Solves issue raised in CB:28953.
Change-Id: I9ace4afd668539c05e7ace30e255af50c7a069c2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/29666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some Unix systems (GuixSD, NixOS) do not install programs like
Bash and Python to /usr/bin, and /usr/bin/env has to be used to
locate these instead.
Change-Id: I7546bcb881c532adc984577ecb0ee2ec4f2efe00
Signed-off-by: Yegor Timoshenko <yegortimoshenko@riseup.net>
Reviewed-on: https://review.coreboot.org/28953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Sometimes it is necessary to be able to see exact command lines used
when compiling and linking. Use the same scheme as some other
Makefile's - enable verbose output when variable V is set to 1.
TEST=tried building cbfstool with V=1, observed verbose output.
Change-Id: Iff25439aabff79e69d1d94a2c51c60bb0e0d7b80
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/29431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a test that, after cloning the repository to a temporary directory,
installs git hooks and attempts to do a good and a bad commit, expecting
the former to succeed and the latter to fail, thus testing the
`commit-msg` hook.
Change-Id: Icdaf0109c60cb5b6952b1a2468ab050a742e4201
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23281
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is so confusing, let's name it what it is ;)
Change-Id: I6f87e2f6912d886e241e03998fb4136fb28bc7b1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Bind a volume for .ccache to the `docker-run-local` targets. By default
the current user's $(HOME)/.ccache will be used, it can be overridden
via the DOCKER_CCACHE variable.
Also rearrange some docker parameters to keep the target readable.
Change-Id: I7d0bdb3861ac56361cacfa74aaf8b45c4f135e5c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add an unprocessed flag (-U) which modifies how files are exported.
In the case of a compressed raw file, extract without decompressing.
In the case of a stage or payload, extract without decompressing or
converting to an ELF.
This can be useful for verifying the integrity of a stage or payload,
since converting to an ELF may not be a deterministic process on
different platforms or coreboot versions.
BUG=b:111577108
TEST=USE=cb_legacy_tianocore emerge-eve edk2 coreboot-utils chromeos-bootimage
cd /build/eve/firmware
/build/eve/usr/bin/cbfstool image.bin extract -r RW_LEGACY \
-n payload -f /tmp/payload_1 -U
START=$((16#`xxd -s 20 -l 4 -p tianocore.cbfs`))
SIZE=$((16#`xxd -s 8 -l 4 -p tianocore.cbfs`))
dd if=tianocore.cbfs skip=$START count=$SIZE bs=1 > /tmp/payload_2
diff /tmp/payload_1 /tmp/payload_2
rm /tmp/payload_1 /tmp/payload_2
Change-Id: I351d471d699daedd51adf4a860661877f25607e6
Signed-off-by: Joel Kitching <kitching@chromium.org>
Reviewed-on: https://review.coreboot.org/29616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add a `docker-run-local` target that is used as a template for the
local build targets (`docker-build-coreboot`, `docker-abuild`, and
`docker-what-jenkins-does`).
Note this changes the user for `docker-what-jenkins-does` which has
(ccache) issues if it's not `root`. Will be fixed in a follow-up.
Change-Id: I9088fb9211726cddc37b17ddf70170c2c382679e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Pointer math with void pointers is illegal in many compilers, though it
works with GCC because it assumes size of void to be 1. Change the pointers
or add parenthesis to force a proper order that will not cause compile
errors if compiled with a different compiler, and more importantly, don't
have unsuspected side effects.
BUG=b:118484178
TEST=Build CBFS with original code, run objdump and saved output. Added
modifications, build cbfs again, run objdump again, compared objdump outputs.
Change-Id: I30187de8ea24adba41083f3bfbd24c0e363ee4b8
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Add a `util/gitconfig/test` subdirectory which will contain tests to run
as executable files, add a helper script.
Add a timeout test that verifies that gitconfig completes in under two
seconds (typical run time is ~30 ms). Add gitconfig tests to the
`testing` Makefile under the `test-tools` target.
Change-Id: Id46f905b9f782e67be97a65d10045c3345dc996b
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23280
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The gerrit reviewers plugin has a certain configuration format. Teach
maintainers to emit it when called with -print-gerrit-rules.
Change-Id: I92cfc905e0c1b03b7cf793a4324c392140a22060
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
First new option is -debug.
Change-Id: Ia6e9b3675449a0b1e6f5d7526ee999f925eaadb2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Help automated tools make sense of the output.
Instead of "[name 1 <email> name 2 <email>]", it now prints
"name 1 <email>, name 2 <email>". As long as there are no commas in the
maintainer names, they can be split easily.
Change-Id: I4a254f566404b081a08923bc7ceb49f02039aa2a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29604
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of checking only for three cases, just use a glob parser (that
translates the glob to regex).
After that, maintainers src/arch/x86/memlayout.h emits:
src/arch/x86/memlayout.h is in subsystem X86 ARCHITECTURE
Maintainers: []
src/arch/x86/memlayout.h is in subsystem MEMLAYOUT
Maintainers: [Julius Werner <jwerner@chromium.org>]
The latter entry was invisible to the maintainers tool because its path
description wasn't in one of the supported formats.
Change-Id: I7e5cf4269415269552e35f2c73952ce3dff487e1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Without this change, the tool only reports the first hit. We want to see
all of them.
Change-Id: Ib59b13c50b61c48e3cb200bf57e28c9453590819
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
ME Cleaner's component has an entry specifying its website, which this
parser didn't know how to handle. Avoid the resulting warning.
While at it, de-C the switch statement and make it work go-style. This
also fixes "R" statements being ignored.
Change-Id: Ifc23e28daba9d85bf690557a80134accea8bed21
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
* Clear remalloced memory
* Fix check for invalid VBT offset in header
* Fix VBIOS checksum generation
* Fix VBIOS size field
* Align VBIOS size to multiple of 512
* Reassign pointers after use of remalloc
* Don't leak on error path
Current version is enough to allow the proprietary Windows Intel GMA
driver to find the VBT in the legacy VBIOS area and it doesn't BSOD
any more.
The LVDS screen remains black, due to an unknown issue with the
proprietary driver, while the VGA works.
Tested with libgfxinit and native graphics init.
Change-Id: If07b1bb51d8fb3499d13102f70fedb36c020fb72
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/29099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The foreword mentioned that you need a gerrit account, but not how to
have git push with the right credentials.
To ease onboarding, point out where to get them.
Change-Id: I0b022bc064e3bc89568617c1a3a3e0e5236ba520
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If we build one of the `all*` targets, build Clang first. Compiling
Clang (just for the host arch, I assume) takes more than half of the
time of the default build. When run as a separate step, we can make
use of Docker's cache if any step after Clang fails.
Change-Id: If67b458cde656f1dc6774215f6a575a48d12b797
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The choice of `gnat-6` was originally an optimization because the meta-
package `gnat` installs not only the current GNAT version but also other
unwanted (and hard to explain) dependencies. Later it was necessary
because GCC 8 couldn't compile our older crossgcc.
Now that we switched crossgcc to GCC 8.1, `gnat` should be fine.
Change-Id: Ica8a1f9d6d71a74ffc4ec76aa0cfbe4b604cde1b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29454
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current version in debian:sid is incompatible with our crossgcc
version. But it turned out that we don't use the optimization features
enabled by libisl at all: crossgcc builds with and without (a proper
version of) libisl-dev installed generate the same coreboot binaries.
Change-Id: I9f9115d8ab33cbe11aa77f16c98465e1c1dedeac
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Martin Roth <martinroth@google.com>
As by afda56e1ad (buildgcc: Drop libelf/elfutils), it's not used (atm).
Change-Id: I3124cb6db5975c21e635636babe700adb0f8cd8b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Global variables are considered a bad practice.
Change-Id: I652a8da75498f871a53eb7509f6145c4842e3373
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/27810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The GPIO register dumper code for the LynxPoint family PCH chips
(Intel 8 Series and C220 Series) was incorrectly using a
shortened version of the LynxPoint-LP GPIO register map.
Switched to the correct register map for the affected chipsets.
Change-Id: I394a198bbb6628915cb73cabc5c8ff808579a07f
Signed-off-by: Fehér Roland Ádám <feherneoh@gmail.com>
Reviewed-on: https://review.coreboot.org/29167
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix a typo and make comments more consistent (start with
capital letter).
BUG=None
TEST=None
Change-Id: I97bff5e05596fc6973f0729e276a2e45b291120d
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/29025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
This is a no-op on non-FSP systems, but enables using it when supported.
Change-Id: I66fe9b8587753ea017e13a752a7728e47287e9a0
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/28776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
There is no datasheet available for this SuperIO, but dumping all
possible registers on a Dell Optiplex GX520 resulted in data that was
similar to other supported chips. Data also matches what is set in the
BIOS, e.g. the parallel and serial ports' addresses.
Change-Id: I768e4b5ec1e73c53e1a2355e0a0657b7a5ccbb89
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The SCH3112, SCH3116 and SCH5127 were lacking a pin dump. Since their
datasheets are available, add their pin dumps.
The SCH3112, SCH3114 and SCH3116 are almost identical, they only differ
in the number of serial ports. Some values in the SCH3114 dump were
inaccurate, that has been fixed as well.
Datasheets used:
- SCH311X: DS00001872A
- SCH5127: DS00002081A
Change-Id: Ic985526be9b09e0452eaf883904dfaf709b7e907
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Its spreading copies got out of sync. And as it is not a standard header
but used in commonlib code, it belongs into commonlib. While we are at
it, always include it via GCC's `-include` switch.
Some Windows and BSD quirk handling went into the util copies. We always
guard from redefinitions now to prevent further issues.
Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
* Add Makefile dependency to source file
* Add argument support
* Add help support
* Print usage on wrong arguments
* Add support for parsing VBT binary file
* Add support for parsing PCI Option ROM
* Add support for writing VBT binary file
* Add support for patching PCI Option ROM
* Keep support for accessing legacy VGA area Option ROM
* Keep support for dumping VBT contents to stdout
Allows to extract VBT, analyse VBT and patch PCI Option ROMs as needed.
The required arguments have been changed:
./intelvbttool --<SOURCECMD> [filename] --<DESTCMD> [filename]
SOURCECMD set the VBT source. Supported:
inlegacy : Legacy BIOS area at phys. memory 0xc0000
invbt : Read raw Intel VBT file
inoprom : Read VBT from Intel Option ROM file
DESTCMD set the VBT destination. Supported:
outdump : Print VBT in human readable form
outvbt : Write raw Intel VBT file
patchoprom: Patch existing Intel Option ROM
Any combination of SOURCECMD and DESTCMD is possible.
Change-Id: I8cbde042c7f5632f36648419becd23e248ba6f76
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Until now, autoport used to create a dummy "romstage.c", then write
romstage code to "early_southbridge.c". While it works, it makes more
sense to write to "romstage.c" instead, as virtually all mainboards do.
Change-Id: If9f9375f9a659e7e685de5f884163813261fa656
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28851
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, an entry being removed is cleared only if the next entry
is also null or deleted.
This patch ensures the entry being removed is cleared regardless of
the next entry type.
BUG=chromium:889716
BRANCH=none
TEST=Run cbfstool bios.bin remove -n ecrw.
Verify bios.bin has 0xFF in the space of the removed entry.
TEST=Run cbfstool bios.bin remove -n fallback/payload (located at the end).
Verify fallback/payload is removed.
TEST=Run sign_official_build.sh on recovery_image.bin. Extract
firmware contents from chromeos-firmwareupdate in the resigned image.
Run 'futility vbutil_firmware --verify' for vblock_A's and FW_MAIN_A
extracted from bios.bin. See the bug for details.
Change-Id: I62540483da6cc35d0a604ec49b2f2b7b11ba9ce5
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/28886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
One occurence of this parameter was changed from LBROOT to CBROOT in
f8ee1806ac ("Rename almost all occurences of LinuxBIOS to coreboot.").
Change the others, too.
Change-Id: Ic0da24c32cd6d2f0577de037b5463c800f455786
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/28828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This board doesn't support the newest RISC-V Privileged Architecture
spec (1.10), and it's based on an FPGA so it's a moving target.
Now that there's actual RISC-V silicon out there (from SiFive),
mb/lowrisc/nexys4ddr will only continue to bitrot.
Change-Id: I4e3e715106a1a94381a563dc4a56781c35883c2d
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/28706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
They allow reducing the visible set of options to remove clutter.
Change-Id: I18c953c7feae23c0752392a2bf8f49783c17310e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/28635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Since CBMEM console became a ring buffer, logs from several boots can be
stored. We are only interested in the current boot.
> -c | --console: print cbmem console
> -1 | --oneboot: print cbmem console for last boot only
For CBMEM time stamps only the time stamps of the current boot are
stored, so only the commands for the CBMEM console need to be adapted.
Change-Id: I18caa4aeebbd5576b9e218d176a7db5a8e868b74
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/28531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
For devices supporting both Linux and Windows, we may find some ACPI
devices that only need drivers in Linux and should not even be shown in
Windows Device Manager UI.
The new 'hidden' keyword in device tree 'device' statement allows
devices sharing same driver to call acpi_gen_writeSTA with different
values.
BUG=b:72200466
BRANCH=eve
TEST=Builds and boots properly on device eve
Change-Id: Iae881a294b122d3a581b456285d2992ab637fb8e
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/28566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add "j pc + 0x0800" at the beginning of the MBR to jump to bootblock.
Tested on hardware:
boot mode 15: works as before
boot mode 1: jump to bootblock works, but bootblock needs to be modified to
move the stack to L2LIM. This will be in a separate commit.
Further changes are needed in the bootblock
Change-Id: I16e762d9f027346b124412f1f7ee6ff37f431d86
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/27397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Change-Id: Icbf21b02d3092815bbe876eceea72ebba8dd54da
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/28599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This SuperIO is supported by coreboot and used in two Asus boards. However,
superiotool was lacking a register dump for this chip. Add the corresponding
data from datasheet W83667HG-B revision 1.3 into superiotool.
The SuperIO's datasheet was obtained by requesting it to Nuvoton.
Change-Id: Ie51dc492c761d9c3d4b6100017bb730b1ae6d1e0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Otherwise it reduces its expectations on what as and ld take in terms
of arguments, which breaks some edk2 related builds because tons of
-I$path_to_stuff arguments aren't passed along.
Change-Id: I53f87442de03d5ead8a6632d3102d5502065b828
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/28534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
- Check payloads, the root Makefiles and toolchain.inc
- 3rdparty is already not checked, so remove
- The marks around COPYING, LICENSE, and README were not needed
- Skip checking .ico files
Change-Id: Ic4a1709224604b36362d82e249c2916fca0336a2
Signed-off-by: Martin Roth <martinr@coreboot.org>
Reviewed-on: https://review.coreboot.org/28431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
On FreeBSD, this test was failing with the error:
"grep: Argument list too long"
I found that changing this to other forms takes MUCH longer, so I left
the original method mostly unchanged except for moving the include &
exclude lists into variables.
Currently, I'm setting all non-linux operating systems to use the second
version. I'll update that if I find other that other OSes support the
first.
Change-Id: I1c9281440d051dea8a8b3a3ddc04676ccea77c7a
Signed-off-by: Martin Roth <martinr@coreboot.org>
Reviewed-on: https://review.coreboot.org/28429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
When building the toolchain under BSDs, this missing backslash is
needed.
Change-Id: I40b0adaa73b241713493fd74f24c93f85e7aabbe
Signed-off-by: Martin Roth <martinr@coreboot.org>
Reviewed-on: https://review.coreboot.org/28362
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FreeBSD doesn't have bash in /bin, so use env to find it. This is
already done in many other scripts that are used in the actual build
path.
Change-Id: If6fb6bc3c55835e2144599fea1cdb2f7abefb0fc
Signed-off-by: Martin Roth <martinr@coreboot.org>
Reviewed-on: https://review.coreboot.org/28364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
According to the datasheet (rev. 1.6) there is no SP2 (apart from
some typos) and the IR is actually implemented as SP3 in LDN 0x16.
Additionally, there is LDN 0x15 to set up CIR-specific options of the
IR serial port, which was missing as well.
Change-Id: I34d90d8c44f11a4f62ccc4b836409cc443fb7952
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/27856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Since ifdfake has been deprecated in favor of better alternatives, there
is no need to support it any further. Remove it from "util/", as well as
any leftover references in other files.
Change-Id: I45fe3d9fd606a61d5c3b9d0e6489a1df6d6510f0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With Alpine base, use pip to install Sphinx 1.7 and Sphinx-autobuild
Alpine, a 4.5MB base, is used over Debian Stable, 101MB, to cut down the
total size of the docker image.
Change-Id: I53f246206458b1de34cd7f3a42481b91ca285ff0
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/28211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
`superiotool` follows its own style (e.g. lot's of missing spaces
and odd placement of braces in the register descriptions).
Change-Id: Ifa33938a0fbac10577cbda10537f856f6f100233
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28214
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows us to add encoding information.
Change-Id: Ic9a12a13f11fd22eeec96fbcca6b706312876b07
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/27874
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Port the newest feature of me_cleaner to ifdtool
(https://github.com/corna/me_cleaner/ , Discussed in
https://github.com/corna/me_cleaner/issues/53 ) to
set AltMeDisable (or HAP for skylake/ME11) bit to the
IFD to disable ME.
In this commit I use (ifd_version >= IFD_VERSION_2) to
judge whether HAP instead AltMeDisable should be set,
since this condition is only fulfilled on skylake
or newer platforms.
This feature needs to guess ich revision, which needs
guess_ich_chipset() from flashrom to be ported here.
Routines to dump those bits are also added.
Change-Id: I9a2ecc60cfbb9ee9d96f15be3d53226cb428729a
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
acpidump now creates dumps with 4 spaces instead of 2 in front of the hex dump,
so be a bit smarter about the input with regexp.
Tested with X220 autoport logs: Still creates the same coreboot code.
Change-Id: I8d48c09cdff9432f394b350540ea9765fc942781
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/28054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
No idea where the escaped parentheses come from but they
are no good. Without this patch I see errors with bash and dash:
./buildgcc: line 1198: (: command not found
./buildgcc: line 1199: (: command not found
The patch uses curly brackets for grouping since they don't
launch a subshell - unlike using unescaped parentheses which
would work too.
shellcheck is happy with either variant (and the original one(!)).
Change-Id: I44fbc659f5b54515e43e85680b1ab0a824b781a7
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/27771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Taken from Linux upstream commit ffe075132af8b7967089c361e506d4fa747efd14
Change-Id: I43d09a912fafe896c045df080c0f75fe6d908087
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/28046
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Comment out 'sepc' and add a comment about it at the top so that it
doesn't get added back in accidentally in a future update.
Change-Id: Iaa909d97d0d97d7bf0799e48fc237a9673d549aa
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/28045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Using recent versions of parecord produces the following:
Failed to open audio file.
According to the manual:
-r | --record
Capture audio data and write it to the specified file or to STDOUT if none is specified. If the
tool is called under the name parec this is the default.
so we suggest parec instead.
Change-Id: I8b821df67b10e9d6533c4cbe19c646c84d436c27
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/23863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
RISC-V has a register named 'sepc' but checkpatch identifies it as a
misspelling of 'spec'. Remove it from the list.
Change-Id: I7b092d6f04e28fba36095c607bc59346fb5c605d
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/28005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The Upper Map section in the descriptor contains a database of flash
chips (VSCC Table). Its offset is located at a fixed offset from
the beginning of the image. ifdtool falsely calculates the offset
from the descriptor signature which has moved by 16 bytes with
step b of the Ibex Peak (5 series) chipset. This produces bogus
output for all chipsets older than that.
This patch corrects the behavior by calculating the offset of
flumap by adding 4096 - 256 - 4 to the start of the image.
Change-Id: I14f029fe702c129dfd8069a58fbd41113700f7ef
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/27858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since only a handful of boards have descriptor blobs in the tree, it makes no
sense to have `HAVE_IFD_BIN` enabled by default then disabled on each mainboard.
This patch flips the default value of said variable, rendering all current
overrides unnecessary. The few boards which have an IFD in the blobs repo use
`select HAVE_IFD_BIN` to enable adding the IFD by default.
Since `HAVE_ME_BIN` depends on `HAVE_IFD_BIN`, the former has been removed
alongside the latter, and has been added to the boards with a ME blob as
`select HAVE_ME_BIN`.
Both `HAVE_IFD_BIN` and `HAVE_ME_BIN` have been removed from autoport as well.
Change-Id: I330c4886f8bea4b1a8ecad6505a0e5cc381654d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/27218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Check if an argument is given and if not print the usage.
Check if all arguments are handled by getopt and if not print the usage.
Change-Id: I40dbd2a51d018eb549e9b2fa4365b3e4f9355bff
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Evgeny Zinoviev <me@ch1p.com>
Check if all arguments are handled by getopt and if not print the usage.
Change-Id: Iccbb65ca768a62791af54afd9b7903495bc690af
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
To install this hook, run
make install-git-commit-clangfmt
This will install a pre-commit-msg hook that runs clang-format
on all .c and .h files that are staged.
It will add a clang-formatted-by: <git username>
line to the commit message to indicate that clang-format
was run on the files and that further processing of them
is not needed.
Change-Id: I1773f55b5b4677dad8f4bea017b6328fd93df20c
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/27779
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add short explanation of Utility list
Change-Id: I5fc45ebe29cd42c1aa18c59dabc3ac3db3107bd7
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/27656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Fix 6 new errors found by shellcheck 0.4.6
SC2155: Declare and assign separately to avoid masking return values.
4 x SC2086: Double quote to prevent globbing and word splitting.
SC2196: egrep is non-standard and deprecated. Use grep -E instead.
One of the SC2086 errors is masked because it needs word splitting.
Change-Id: I7f869e6d208f7247f739619c538be6075b802719
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
- Use TARGET variable for location of passing/failing boards files.
This should better handle the directory, wherever it is.
- Don't save make.log location if make.log is being deleted.
Change-Id: I28e55feef85c9b642ac5ff70ecef113cf7978707
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Iefeb47bca3676a1f807b7a66b74a07491e351362
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Descriptions are taken from the files themselves or READMEs. Description
followed by a space with the language in marked up as code.
Change-Id: I5f91e85d1034736289aedf27de00df00db3ff19c
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/27563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
When extracting a payload from CBFS, ignore compression fields for
these types of payload segments:
- PAYLOAD_SEGMENT_ENTRY
- PAYLOAD_SEGMENT_BSS
- PAYLOAD_SEGMENT_PARAMS
These types of payload segments cannot be compressed, and in certain
cases are being erroneously labeled as compressed, causing errors
when extracting the payload.
For an example of this problem, see creation of PAYLOAD_SEGMENT_ENTRY
segments in cbfs-mkpayload.c, where the only field that is written to
is |load_addr|.
Also, add a linebreak to an ERROR line.
BUG=https://ticket.coreboot.org/issues/170
TEST=cbfstool tianocore.cbfs extract -m x86 -n payload -f /tmp/payload -v -v
Change-Id: I8c5c40205d648799ea577ad0c5bee6ec2dd7d05f
Signed-off-by: kitching@google.com
Reviewed-on: https://review.coreboot.org/27520
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This fixes most of the simpler shellcheck errors in shellcheck 0.4.6.
There are still a few warnings left that weren't simple to fix or
would have required more testing before I was confident in them.
Change-Id: I79ab3614cc1d69d3dfe1e0374e930313f2011cbf
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add the Do-not-assume-glibc-glob-internals patch to fix segfaults.
- Update glob_interface_v2 patch to the patch directly from the
make git repository instead of translating it. This gives better
attributution to the original author.
Change-Id: Ibc936fc00925a4ca2170a6f5dca7c2b8d8d62f02
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Exclude build flags that generate warnings when scanbuild is running
- Add the SCANBUILD_ARGS variable to abuild so we can pass in arguments
to scanbuild.
- Set the default scanbuild argument to -k (--keep-going) so that even
if an error occurs it continues with the scan. This is similar to what
we do with coverity runs.
Change-Id: I82e7c13d7fd7432b43c17a31834ec82fca158a07
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Create a new target, docker-jenkins-attach, to access the running
jenkins server
- Update docker-shell target to set term & size.
Change-Id: Ifa67afb62d4a216281ebece405e9b26fd4d14622
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27494
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Without the second set of braces it fails (due to -Werror) with
"suggest braces around initialization of subobject"
Change-Id: I63cb01dd26412599551ee921c3215a4aa69f4e17
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/27551
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We don't block commits for failing checkpatch in gerrit, and we
shouldn't block them here. This allows checkpatch to still run, so
users can see the issues, but won't prevent the commit.
Adds a delay if checkpatch fails so that the issues can be seen.
Change-Id: Ibd4e8bb74e0b02825dcdf16e233a061c4bb43f50
Signed-off-by: Martin Roth <martin@coreboot.org>
Reviewed-on: https://review.coreboot.org/27534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Some types of payload segment headers do not use all fields.
If these unused fields are not initialized to 0, they can
cause problems in other software which consumes payloads.
For example, PAYLOAD_SEGMENT_ENTRY does not use the compression
field. If it happens to be a non-existent compression type,
the 'cbfstool extract' command fails.
BUG=https://ticket.coreboot.org/issues/170
TEST=cbfstool tianocore.cbfs create -s 2097152 -m x86
cbfstool tianocore.cbfs add-payload -f UEFIPAYLOAD.fd -n payload -c lzma -v
xxd tianocore.cbfs | head # visually inspect compression field for 0
Change-Id: I359ed117ab4154438bac7172aebf608f7a022552
Signed-off-by: kitching@google.com
Reviewed-on: https://review.coreboot.org/27540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The linux trampoline was modifying the existing GDT
to add the 0x10 and 0x18 descriptors for Linux.
This will not work when the existing GDT is in ROM.
Change the code to set up a new GDT in what we know to be
RAM.
Tested by booting a linux payload. The main reason this works
is that Linux almost immediately loads its own GDT and then
segment registers. This GDT is a very temporary bridge.
Note that none of this change used to be necessary; the coreboot
GDT was originally compatible with Linux (ca 2000);
then Linux changed.
Change-Id: I13990052fbfd6a500adab8a2db8f7aead1d24fa6
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/27529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Even though we were setting V=1 in the build, this wasn't getting passed
to abuild, so the builds there didn't have additional debug information.
That made it difficult to debug issues on the builder. This sets the
verbose flag for abuild if V=1 is set.
Change-Id: Id9ec50add9693a6c36ffdb5c78d148d0fc012549
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Because earlier versions of debian set /dev as a standard tmpfs
filesystem, that was a simple place to build. Now, this has been
changed and /dev isn't a standard tmpfs that will grow to 50% of
memory. It's a fixed, very small size, and can no longer even be
resized.
Because of this, create a new directory to build in and add it to
/etc/fstab. Mount it when the container is started.
As long as we're at it, make the other build directories (ccache
and slave-root/workspace) tmpfs as well. The builders we're using now
have plenty of memory, so don't write any of the files to disk.
Update the Makefile to get rid of all references to ccache directory.
Change-Id: I21fd2c4395d7ffb9428172f035991338658cd907
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In case multiple FMAP regions are specified, print the FMAP name.
Useful if VBOOT is enabled and multiple CBFS are printed.
Change-Id: Id6f29ebeda8a9bde6dfe39362e0f2a5e33c86b26
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26862
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Convert Cavium's BDK devicetree blob to a static C file.
The resulting file must be included in mainboard folder to provide
board specific configuration values to BDK functions.
Example call:
python devicetree_convert.py --in sff8104.dtb --out bdk_devicetree.c
Change-Id: I76a5588aefe4f680228eca46a0e4dba7e695931c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26228
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Update stable directories
- Remove duplicated directories
There are currently 220 files that still need to have headers added or
be excluded from the lint-000-license-headers test.
Change-Id: I40046a2fb7359262b130f6813eda1f2c30916b46
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In Windows Cygwin enviroment, compiler reports
redefinition error at cbfstool/ifwitool.c
on _packed and __aligned.
Skip new defines when vales are already defined.
Change-Id: I3af3c6b8fc57eee345afcef2f871b897138f78ce
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/27357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
commit c1072f2 [cbfstool: Update FIT entries in the second bootblock]
incorrectly changed the value of type_checksum_valid for microcode
entries from FIT_TYPE_MICROCODE to 0, breaking microcode loading on
Skylake/FSP1.1 devices (and others?). Correct this by reverting to the
previous value.
Test: build/boot google/chell, observe FspTempRamInit no longer fails,
device boots as expected.
Change-Id: Ib2a90137c7d4acf6ecd9f06cb6f856bd7e783676
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27266
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Copied from the GNU make repository
author Paul Smith <psmith@gnu.org>
commit 48c8a116
configure.ac: Support GLIBC glob interface version 2
Change-Id: Id70a2b98dad6349ee56985d8dd6d4f0d87b470e6
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/26939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With -D, the newly built toolchain isn't installed into $prefix/...
but into $DESTDIR/$prefix/... while being built for $prefix alone.
This is useful for distributions, but it breaks down when the build
host already has the toolchain installed in $prefix without proper
build isolation (cf. gentoo):
In such cases libgcc etc are built using the new compiler (as gcc's
build system is smart enough to state the path explicitly), but that
compiler then uses its regular algorithm to determine the path to as,
ld, ...
That makes it use the tools from $prefix, which might differ in formats
(assembly, certain object file flags, ...): nds32le-elf in particular
has rather unstable formats still, and so new compilers can't work
with old binutils.
The approach to deal with this is to take an unused path that's
specified by gcc's build system ($out/gcc/$arch/$version) and symlink
it to the new toolchain - these explicitly given directories take
precedence over the default search path, and so the new binutils
are used.
Change-Id: Ia9a262e73f56cd486a2ae07422b598c205a03aed
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/27241
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Once a second bootblock has been added using topswap (-j)
option, Update the entries in second FIT using -j option with
update-fit command.
Additionally add a -q option which allows to insert the address of
a FMAP region (which should hold a microcode) as the first entry in
the second FIT.
BUG=None
BRANCH=None
TEST= Create ROM images with -j options and update FIT using -q option.
example:
./build/util/cbfstool/cbfstool coreboot.tmp create \
-M build/fmap.fmap -r COREBOOT,FW_MAIN_A,FW_MAIN_B,RW_LEGACY
build/util/cbfstool/cbfstool coreboot.tmp add \
-f build/cbfs/fallback/bootblock.bin -n bootblock -t \
bootblock -b -49152 -j 0x10000
build/util/cbfstool/cbfstool coreboot.tmp add-master-header -j 0x10000
build/util/cbfstool/cbfstool coreboot.tmp add -f build/cpu_microcode_blob.bin \
-n cpu_microcode_blob.bin -t microcode -r COREBOOT -a 16
build/util/cbfstool/cbfstool coreboot.tmp. update-fit \
-n cpu_microcode_blob.bin -x 4 -j 0x10000 -q FW_MAIN_A
Also try the failure scenarion by providing invalid topswap size.
Change-Id: I9a417031c279038903cdf1761a791f2da0fe8644
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/26836
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add an option '-j' which takes the size of topswap boundary.
This option serves both as a bool and a size for creating
a second bootblock to be used with topswap feature in Intel CPUs.
'-j' is also used in conjunction with add-master-header to
update the location of cbfs master header in the second bootblock.
BUG=None
BRANHC=None
TEST=add bootblock entry to the image with -j option specifying different
topswap sizes and also use the -j option for add-master-header.
Change-Id: I3e455dc8b7f54e55f2229491695cf4218d9cfef8
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/22537
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are many boards in coreboot which support multiple
variants. When abuild is used to compile a single target, it builds
all its variants. If a target has 5 variants, then abuild takes nearly
10x the time to compile all variants of the target. This change adds
an option -b/--board-variant to enable abuild to compile only a single
variant of the target.
TEST=Verified:
1. abuild builds all variants of the target if -b option is not
provided.
2. abuild builds a single variant if -b option is provided.
3. abuild prints appropriate error message if invalid variant name is
provided.
Change-Id: I3781568c6409c5ec2610a8386a21d86037428e7f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27215
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
"ops" field was used in device structure only to add
default_dev_ops_root for root device. It was always set to NULL for
all other devices. This change gets rid of ops field from struct
device and instead hardcodes default_dev_ops_root in pass1 for root
device.
BUG=b:80081934
TEST=Verified that static.c generated with and without this change is
exactly the same.
Change-Id: I0848788610c2ed27274daf4920de3068a9784d4c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27209
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds support to allow variants to override the devices and
properties in base device tree by providing an override device
tree. It works as follows:
1. Both base and override device trees are parsed from provided input
files.
2. Walk through the trees in lockstep fashion using depth-first
traversal checking if a node in override tree has a matching node in
base tree.
- If matching node is found, then update the properties of base node
using the override node. Continue walking the children of the nodes.
- If matching node is not found, then copy the entire override
subtree of the node under the current base parent. In addition to
that, chip instance pointers of the nodes in override tree need to be
updated if they were pointing to the override parents chip instance.
Since chip always expects a device to be present, it leads to a
side-effect that overriding chip registers requires that a device is
always provided for the chip in the override tree as well.
BUG=b:80081934
Change-Id: I6604e4f8abe3fc48240e942fea32da96031e1e46
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27206
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change allows sconfig utility to accept an extra optional
parameter to specify override device tree that can be used to override
the properties or add new devices in addition to that provided by base
device tree. This is helpful for variants that share most of the
devicetree but have to override certain registers or add some devices
which might not be applicable to base devicetree.
In order to support the override devicetree, following changes are
made in this CL:
1. override_root_dev and override_root_bus are provided.
2. main() function is updated to accept an optional argument.
3. If override device file is provided, then parse_devicetree is
called for override_devtree as well.
This change in itself does not provide the override feature. It is
only a small step towards the final goal. The override devicetree
parsed by sconfig is currently unused.
BUG=b:80081934
Change-Id: I477e038c8922ae1a9ed5d8bf22a5f927a19a69c7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Nico Huber