Hook up edk2 build flag PcdPcieResizableBarSupport to coreboot
Kconfig CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I5cc12d32c5e132b9f99ec650377d7683377c2a9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74926
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The stable version was over 5 years old. Update it to the current
main branch.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic9cbe5e3dad9f2ff06e1fa8f0582d4c8b3e81a22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add pen detect support on the SOC pen detect GPIO.
BUG=b:286296762
TEST=Verify pen detect works on Myst
Change-Id: I922d643a83c5cd8ea0ab9fe6733f7aa05d935802
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Follow spec[1] to modify WWAN power sequence. The WWAN power sequence
of warm reset is fail. The correct sequence is WWAN_EN should keep high when doing warm reset. Set GPP_D6 to PWROK which is not to do PAD
reset when warm reset.
[1]:
[JDB10] FC ADL-N_WWAN sequence_FM101-GL SDX12 Power Timing
Review_V1.6_20230602.xlsx
BUG=b:285065375
BRANCH=firmware-nissa-15217.B
TEST=1. emerge-nissa coreboot chromeos-bootimage
2. power sequence meets spec.
Change-Id: If59630dbd10e971c91e01f33a657c01d857bc0b9
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75690
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable wifi sar function for yavilla/yavilly/yavijo.
Use the fw_config to separate SAR setting for different wifi card.
BUG=b:286141046
BRANCH=firmware-nissa-15217.B
TEST=build, enabled iwlwifi debug, and check dmesg
Change-Id: I1bd111a734a250df49535a07ef056d5b68fccb33
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Add new memory parts
DRAM Part Name ID to assign
Hynix H58G66AK6BX070 3 (0011)
Hynix H9JCNNNFA5MLYR-N6E 4 (0100)
Micron MT62F2G32D8DR-031 WT:B 4 (0100)
BUG=b:279325772
BRANCH=firmware-brya-14505.B
TEST=run part_id_gen to generate SPD id
Change-Id: I2e6a916de08e7c05e95909d2b69bc839d13192d9
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74713
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts.
The memory parts being added are:
1. K4U6E3S4AB-MGCL
2. K4UBE3D4AB-MGCL
BUG=b:285504022
BRANCH=dedede
TEST=build
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: I87a4dcdb6196c3ca7bed4b5c1bc654297339c16d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75605
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The file VGA_BIOS_FILE points to is right now the Mendocino VBIOS. Since
the default value probably shouldn't point to a location in site-local,
drop this for now, but leave a TODO to put that back once the correct
VBIOS files are available in 3rdparty/amd_blobs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifbc6cbe1e371d8d247f86555a5361ed237897dea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Instead of adding the new PCI IDs of the XHCI controllers in every new
chip generation to the pci_xhci driver, bind the driver to the internal
PCI devices of the XHCI controllers via the device ops statement in the
chipset devicetree. The PCI device function of the XHCI2 controller in
Mendocino can be either a dummy device or the XHCI controller, so the
device ops are attached to that device in the mainboard devicetree
instead. The Glinda code is right now just a copy of the Mendocino code,
so it'll change in the future, but for consistency the equivalent
changes to those in Mendocino are applied there too.
Since the device ops are now attached to the devices via the static
devicetree entry, also remove both the xhci_pci_driver struct and the
amd_pci_device_ids array from drivers/usb/pci_xhci/pci_xhci.c.
TEST=SSDT entries for the XHCI controllers are still generated on
Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9c455002c6d2aac576fe24eee0c31744b4507bb0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Initialize the SPI Flash in bootblock to ensure that
CONFIG_SPI_FLASH_EXIT_4_BYTE_ADDR_MODE will exit 4-byte addressing mode.
BUG=b:285110121
TEST=boot myst and verify flash operations work correctly
Change-Id: Ia88d2b46884b096b4c558bc86513159ec6d35eb5
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75588
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Include the GPU ACPI methods for all of Hades baseboard.
BUG=b:285981616
TEST=built for Hades and verify shutdown works
Change-Id: Iec3c4b59a9e7a9d4a902db51d40b60e114521774
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The PCI root complex itself isn't on an enumerable bus, so without
providing an _STA method, the device will still be assumed to be present
and visible, so this won't change behavior. This also brings Stoneyridge
more in line with the newer SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I663c7bcba89ffe25d0819d83461cb95e10f49028
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75671
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PCI root complex itself isn't on an enumerable bus, so without
providing an _STA method, the device will still be assumed to be present
and visible, so this won't change behavior. This also brings Picasso
more in line with Cezanne and newer SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: Ied48b48113f6e871e90d17cbd216be003f05b5ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Hook up xhci ops for Phoenix xHCI device. Benefit is we don't have to
bother by adding xhci DID.
BUG=b:285981912
TEST=check coreboot log shows below.
[INFO ] \_SB.PCI0.GP41.XHC0.RHUB.SS01: USB3 Type-A Port A0 (MLB)
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ib59874948725966b04b54def3f6de463afeda709
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
HW has invert the signal, set it to active high.
BUG=b:285964562
TEST=check crossystem wpsw_cur change as expected.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I54c578e5df5f1b24743cc9506e1e31b0b18bfb25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75628
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Make get_ramtop_addr not static to allow other code to use it.
Bug=b:276120526
TEST=Able to build rex
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I8ef8a65b93645f25ca5e887342b18679d65e74b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Add usb wwan device tree entry. Also set wwan_rst to high due to
HW design active high.
BUG=b:285792436
TEST=check FM101 is detected by Linux kernel.
Bus 002 Device 002: ID 2cb7:01a2 Fibocom Wireless Inc.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I0aa60cb284d4b7f99e16643a92ee58467a355026
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75660
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace the magic constants by using defines.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I16179a37b6ee19bc3b4862b7dcb3bbc4caf63f2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Replace the magic constants by using defines.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I94ad285a2c5712d352d4f92697fc3140847d88de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75667
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace the magic constants by using defines.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6303e5a697a7ad09a48cb7a2c79fa76f4c6ce232
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Replace the magic constants by using defines.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie558de02cd4f8914409639a74c54b57df3418ed9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75665
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace the magic constants by using defines.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3cb150aee8030d1a419f3596ddbc32cb29f65b52
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Use the ROOT_BRIDGE macro in soc.asl to replace the pci0.asl file. The
soc/amd/common/acpi/lpc.asl file which was included in the now removed
pci0.asl file now gets included in the correct scope in the soc.asl
file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I373c171f7f4754391012b41d44965561ced4f0b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75595
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the ROOT_BRIDGE macro in soc.asl to replace the pci0.asl file. The
soc/amd/common/acpi/lpc.asl file which was included in the now removed
pci0.asl file now gets included in the correct scope in the soc.asl
file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If293188fc8d0ff41b47ab84c9655333e9ebe58e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Use the ROOT_BRIDGE macro in soc.asl to replace the pci0.asl file. The
soc/amd/common/acpi/lpc.asl file which was included in the now removed
pci0.asl file now gets included in the correct scope in the soc.asl
file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6fc4b09f79e633208ab7536543c876c2c6129eb3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75593
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the ROOT_BRIDGE macro in soc.asl to replace the pci0.asl file. The
soc/amd/common/acpi/lpc.asl file which was included in the now removed
pci0.asl file now gets included in the correct scope in the soc.asl
file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia8f0f1619a71f4ab2051714a9d8c7eb200845390
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75592
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Board IDs are now filled in as part of the signing process, so we don't
need to set them in coreboot.
BUG=b:240620735
TEST=Build and check VBOOT_GSC_BOARD_ID is set to ZZCR.
Change-Id: I7dda8ad59046a1dd9a28595e037eda86e91c98df
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75641
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This updates the go modules in the intel-sec-tools git submodule. This
is not needed.
Change-Id: I2012d519b07321317fef415df892bbb966512ee2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55845
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This file only contain the ACPI code describing the MMIO devices in the
FCH, so rename it to mmio.asl. This also brings the Stoneyridge ACPI
code a bit more in line with the ACPI code of the other SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iccef1fc5230e3e104d8dea586a9cbaf894471c12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75597
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of having the different static parts of the PCI0 device in
northbridge.asl and sb_pci0_fch.asl, instantiate the static parts of the
PCI0 device via the ROOT_BRIDGE macro in soc.asl.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a9af2fd853f4e993e71158c5e85052084b50cdc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75596
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This file only contain the ACPI code describing the MMIO devices in the
FCH, so rename it to mmio.asl. This also brings the Picasso ACPI code a
bit more in line with the ACPI code of the newer SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I64490ba8e34ae1fbe6aea1ab6496b5b04ac4d0aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75591
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of having the different static parts of the PCI0 device in
northbridge.asl and sb_pci0_fch.asl, instantiate the static parts of the
PCI0 device via the ROOT_BRIDGE macro in soc.asl.
TEST=Both Ubuntu 2022.4 and Windows 10 still boot successfully and don't
show any new ACPI-related error.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2587d8bb270dc3edce9dfa570a5018116fc9187f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
When instantiated in the DSDT, this macro will expand to the static part
of the PCIe root bridge device. This macro allows both to deduplicate
parts of the DSDT code as well as adding more than one PCIe root bridge
device in the DSDT.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6f20d694bc86da3c3c9c00fb10eecdaed1f666a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75568
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that Stoneyridge is the only AMD SoC that still needs the part of
the SSDT that contains the TOM1 and TOM2, move it from the common code
to the Stoneyridge northbridge code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9091360d6a82183092ef75417ad652523babe075
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75564
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Use the new common AMD code that gets the usable non-fixed MMIO windows
from the data fabric MMIO decode registers and generate the PCI0 _CRS
ACPI code based on those regions. For a more detailed description see
the corresponding patch that changes the Picasso code to use this new
code. In contrast to the Picasso code, this change will drop the
unneeded _STA method inside the PCI0 scope which wasn't present in
Picasso's ACPI code before it got replaced by the SSDT that gets
generated by amd_pci_domain_fill_ssdt.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I948d882b2e2c6d19f73c0be094e4ff6e42ec81d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75560
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use the new common AMD code that gets the usable non-fixed MMIO windows
from the data fabric MMIO decode registers and generate the PCI0 _CRS
ACPI code based on those regions. For a more detailed description see
the corresponding patch that changes the Picasso code to use this new
code. In contrast to the Picasso code, this change will drop the
unneeded _STA method inside the PCI0 scope which wasn't present in
Picasso's ACPI code before it got replaced by the SSDT that gets
generated by amd_pci_domain_fill_ssdt.
BUG=b:283495475
TEST=Myst still boots and both the coreboot console and the kernel show
the expected PCI MMIO ranges being used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I425876c4ef470574e00e123d36101641240c98cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Use the new common AMD code that gets the usable non-fixed MMIO windows
from the data fabric MMIO decode registers and generate the PCI0 _CRS
ACPI code based on those regions. For a more detailed description see
the corresponding patch that changes the Picasso code to use this new
code. In contrast to the Picasso code, this change will drop the
unneeded _STA method inside the PCI0 scope which wasn't present in
Picasso's ACPI code before it got replaced by the SSDT that gets
generated by amd_pci_domain_fill_ssdt.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iad34d74d9f6cbed1d8a71a561a505f563e31db18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use the new common AMD code that gets the usable non-fixed MMIO windows
from the data fabric MMIO decode registers and generate the PCI0 _CRS
ACPI code based on those regions. For a more detailed description see
the corresponding patch that changes the Picasso code to use this new
code. In contrast to the Picasso code, this change will drop the
unneeded _STA method inside the PCI0 scope which wasn't present in
Picasso's ACPI code before it got replaced by the SSDT that gets
generated by amd_pci_domain_fill_ssdt.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b14ee0682ae1f2212ab43977c076687706434ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75557
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Instead of having PCI0's _BBN method in the DSDT that always returns 0,
use acpigen_write_BBN to generate the _BBN method that returns the first
PCI bus number in the PCI domain/host bridge.
TEST=On mandolin the _BBN method in the _SB/PCI0 scope is now in the
SSDT instead of the DSDT, but still returns 0.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8badeb0064b498d3f18217ea24bff73676913b02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74992
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use amd_pci_domain_read_resources function that gets the configured MMIO
regions for the PCI root domain from the data fabric's MMIO decode
registers instead of using pci_domain_read_resources. This results in
the same IO port range being used by the allocator, but makes sure that
the allocator will only allocate non-fixed MMIO resources in the address
ranges that get decoded to the PCI root complex. In order for the PCI0
_CRS ACPI resource template to match the decoded PCI root domain MMIO
windows, use amd_pci_domain_fill_ssdt to generate the _CRS ACPI code
instead of having a mostly hard-coded _CRS method in the DSDT. This
makes sure that the OS will know about the MMIO regions it is allowed to
used.
Before this patch, only the region from TOM1 to right below
CONFIG_ECAM_MMCONF_BASE_ADDRESS was advertised as usable PCI MMIO in the
PCI0 _CRS method. Also the resource allocator didn't get any constraint
on which address ranges it can use to put the non-fixed MMIO resources.
This approach worked until now, since all address range from 0 up to
right below TOM1 was filled with either usable or reserved memory and
the allocator was allocating beginning right from TOM1, since it was
using the bottom-up allocation approach and everything below TOM1 was
already in use. The MMIO region from TOM1 to right below
CONFIG_ECAM_MMCONF_BASE_ADDRESS also matched the MMIO decode window
configured in the data fabric's MMIO decode registers, so everything
seemed to work fine. However, when either selecting
RESOURCE_ALLOCATION_TOP_DOWN or enabling above 4GB MMIO, things broke
badly. This was partially due to the allocator putting non-fixed MMIO
resources in regions that weren't decoded to the PCI root, since AMD
family 17h and 19h silicon doesn't subtractively decode PCI MMIO and the
wrong ranges the allocator used also weren't advertised in ACPI.
TEST=Even when selecting RESOURCE_ALLOCATION_TOP_DOWN that usually ends
up with a non-working system when the MMIO ranges aren't reported
correctly to the resource allocator due to the reasons descried above,
Ubuntu 22.04 LTS still boots on Mandolin both with SeaBIOS and EDK2
payload and Windows 10 boots with EDK payload. There's however an EDK2
bug that results the MMCONFIG region not being advertised in the e820
table, which causes Linux to not use the MMCONFIG and fall back to the
legacy PCI config access method. This only happens with EDK2 payload and
everything works fine when using SeaBIOS as payload. That e820 issue is
unaffected by this patch.
At the end of the data_fabric_set_mmio_np call, this is the data fabric
MMIO register configuration:
=== Data Fabric MMIO configuration registers ===
idx base limit control R W NP F-ID
0 fc000000 febfffff 93 x x 9
1 10000000000 ffffffffffff 93 x x 9
2 d0000000 f7ffffff 93 x x 9
3 fed00000 fedfffff 1093 x x x 9
4 0 ffff 90 9
5 0 ffff 90 9
6 0 ffff 90 9
7 0 ffff 90 9
The limit of the data fabric MMIO decode register 1 is configured as
0xffffffffffff although this is way beyond the addressable memory space.
add_data_fabric_mmio_regions fixes this up, so the range that gets
passed to the allocator in that case is 0x7fcffffffff which takes both
the reserved most significant address bits used for the memory
encryption and the 12GB reserved data fabric MMIO at the top of the
usable address space into account.
This results in the following domain ranges passed to the resource
allocator:
DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
DOMAIN: 0000 mem: base: fc000000 size: 0 align: 0 gran: 0 limit: febfffff
DOMAIN: 0000 mem: base: 10000000000 size: 0 align: 0 gran: 0 limit: 7fcffffffff
DOMAIN: 0000 mem: base: d0000000 size: 0 align: 0 gran: 0 limit: f7ffffff
The IO resource producer region is split into two parts to not cover the
PCI config IO region resource consumer. This results in these resources
being added to the PCI0 _CRS resource template:
amd_pci_domain_fill_ssdt ACPI scope: '\_SB.PCI0'
PCI0 _CRS: adding busses [0-3f]
PCI0 _CRS: adding IO range [0-cf7]
PCI0 _CRS: adding IO range [d00-ffff]
PCI0 _CRS: adding MMIO range [fc000000-febfffff]
PCI0 _CRS: adding MMIO range [10000000000-7fcffffffff]
PCI0 _CRS: adding MMIO range [d0000000-f7ffffff]
PCI0 _CRS: adding VGA resource
Kernel version 5.15.0-43 from Ubuntu 2022.4 LTS prints this in dmesg:
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0x10000000000-0x7fcffffffff window]
Another noteworthy thing I wasn't aware of at first when testing ACPI
changes on Windows 10 is that a normal Windows shutdown and boot cycle
won't result in it processing the changed ACPI tables; you have to tell
it to reboot to do a proper full boot where it will process the updated
ACPI tables (and fail if it dislikes something about the ACPI tables and
bytecode).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia24930ec2a9962dd15e874e9defea441cffae9f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74712
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Lean Sheng Tan