This code is added to support the AMD SB900 southbridge.
Change-Id: I7dc5e13a53ffd479dcea4e05e8c8631096e2ba91
Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Signed-off-by: efdesign98 <efdesign98@gmail.com>
Reviewed-on: http://review.coreboot.org/41
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
This is the addition of the AMD Family 12 cpu code.
Change-Id: I3febc81e192b4e86bbd3e8d6e1da62a28598fa8c
Signed-off-by: Frank Vibrans<frank.vibrans@amd.com>
Signed-off-by: efdesign98 <efdesign98@gmail.com>
Reviewed-on: http://review.coreboot.org/40
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
So we don't waste time on the first cbfs scan.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
[adapt persimmon with the same change, and work around romcc bug
in bootblock code: it doesn't like MEMACCESS[idx] |= value;]
Change-Id: Ic4d0e53d3102be0de0bd18b1b8b29c500bd6d997
Reviewed-on: http://review.coreboot.org/9
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marcj303@gmail.com>
Requires Scott Duplichan's patch for NIC support.
Enables required PCIe port for USB3 - does not interfere
with normal operations on non-USB3 model.
Change-Id: I451bb1b4f799d6485e75fa949933e25e821b65f9
Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com>
Reviewed-on: http://review.coreboot.org/45
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Scott Duplichan's patch from the mailing list:
sb800 cimx wrapper: Run the complete sb800 cimx sbBeforePciInit() function
once, after determining device 0x15 function enables.
1) Update the asrock e350m1 devicetree.cb to match the hardware.
2) Change the way the sb800 cimx wrapper code works. The original
cimx code calls sb800 cimx function sbBeforePciInit() once. When
ported to coreboot, the gpp component of this function was called
once for each gpp port, as the gpp port's enable/disable state
became known. A 05/15/2011 change makes the early gpp code run
only once, triggered by processing the 4th gpp port. This method
is not general enough because the 4th gpp port is not enabled on
all boards. With the current change, the early gpp code runs when
the first gpp port is processed. If any gpp ports are enabled, the
first must be enabled. Tested with Win7 and linux on asrock e350m1.
This change will also affect amd inagua, and has not been tested
on that board.
Change-Id: I93d44c216bfcab3c3a8fbb79d23dab43a65850e6
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Marshall Buschman <mbuschman@lucidmachines.com>
Reviewed-on: http://review.coreboot.org/44
Tested-by: build bot (Jenkins)
Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
Fixes spurious SMI crashes i've seen, and ACPI/SMM interaction.
For reference, the mail i've sent to ML with the bugreport:
whenever i've docked/undocked the thinkpad from the docking station,
i had to do that twice to get the action actually to happen.
First i thought that would be some error in the ACPI code. Here's a
short explanation how docking/undocking works:
1) ACPI EC Event 0x37 Handler is executed (EC sends event 0x37 on dock)
2) _Q37 does a Trap(SMI_DOCK_CONNECT). Trap is declared as follows:
a) Store(Arg0, SMIF) // SMIF is in the GNVS Memory Range
b) Store(0, 0x808) // Generates I/O Trap to SMM
c) // SMM is executed
d) Return (SMIF) // Return Result in SMIF
I've verified that a) is really executed with ACPI debugging in the
Linux Kernel. It writes the correct value to GNVS Memory. After that,
i've logged the SMIF value in SMM, which contains some random (or
former) value of SMIF.
So i've added the GNVS area to /proc/mtrr which made things work.
I've also tried a wbinvd() in SMM code, with the same result.
After reading the src/cpu/x86/smm/smmhandler.S code, i've recognized
that it starts with:
movw $(smm_gdtptr16 - smm_handler_start +
SMM_HANDLER_OFFSET), %bx
data32 lgdt %cs:(%bx)
movl %cr0, %eax
andl $0x7FFAFFD1, %eax /* PG,AM,WP,NE,TS,EM,MP = 0 */
orl $0x60000001, %eax /* CD, NW, PE = 1 */
movl %eax, %cr0
/* Enable protected mode */
data32 ljmp $0x08, $1f
...which disables caching in SMM code, but doesn't flush the cache.
So the problem is:
- the linux axpi write to the SMIF GNVS Area will be written to Cache,
because GNVS is WB
- the SMM code runs with cache disabled, and fetches SMIF directly from
Memory, which is some other value
Possible Solutions:
- enable cache in SMM (yeah, cache poisoning...)
- flush caches in SMM (really expensive)
- mark GNVS as UC in Memory Map (will only work if OS
really marks that Area as UC. Checked various vendor BIOSes, none
of them are marking NVS as UC. So this seems rather uncommon.)
- flush only the cache line which contains GNVS. Would fix this
particular problem, but users/developers could see other Bugs like
this. And not everyone likes to debug such problems. So i won't like
this solution.
Change-Id: Ie60bf91c5fd1491bc3452d5d9b7fc8eae39fd77a
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/39
Tested-by: build bot (Jenkins)
The docking takes place in romstage to have early serial I/O for debugging.
But to keep romstage small and prevent linking the EC code to romstage, set the
status LED's in ramstage.
Change-Id: I89fadbd61b6bfd9aff8c22370e51c84325f24751
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/42
Tested-by: build bot (Jenkins)
Can be used to disable/enable Power output on USB ports.
Change-Id: I5eb52b33c9e3359b0e5874bda2c0c8d75c196bc2
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/37
Tested-by: build bot (Jenkins)
Overwriting the SMM Area on resume leaves us with
all variables cleared out, i.e., the GNVS pointer
is no longer available, which makes SMIF function
calls impossible.
Change-Id: I08ab4ffd41df0922d63c017822de1f89a3ff254d
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/34
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
it isn't used anywhere, and could be fetched from git/svn history if
needed.
Change-Id: Iaa2ba39af531d0389d7ab1110263ae7ecaa35c70
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/35
Tested-by: build bot (Jenkins)
We're using '0xcafed00d' all over the code as magic for ACPI S3
resume. Let's add a define for that. Also replace 0xcafebabe by
a define.
Change-Id: I5f5dc09561679d19f98771c4f81830a50202c69f
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/33
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The handler should return 1 if it handled the request. The current
code returns 0, which causes 'Unknown function' logs.
Change-Id: Ic296819a5f8c6f1f97b7d47148182226684882a0
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/29
Tested-by: build bot (Jenkins)
Using gdb with coreboot is not (yet) very common, so at least for
now it makes sense to not build gdb by default. A make crosstools
target is also added, which runs the full build in util/crossgcc
and thus generates a toolchain with both compiler and debugger.
Change-Id: I939ebcd06ae9a1bc485fd18e70cac98112d3bbbf
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/17
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Buschman <mbuschman@lucidmachines.com>
Seabios doesn't have this support included yet,
which causes the generic Persimmon and other CIMx
sb800 platforms to not boot.
Change-Id: If07328b7c62d7fc314647adce8fab983ed327854
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/14
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
This option is PMH7 specific, and should be moved there,
so all Notebook utilizing a PMH7 have this option.
For Thinkpads without Touchpad (like the X60), simply
don't add 'touchpad' to cmos.layout.
Change-Id: Icdd0093670d565f1b16e2483aa286f4d63ccc52a
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/6
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
disabling ACPI during S3 wakeup breaks ACPI wakeup, as the
Host OS is assuming that ACPI is enabled.
Change-Id: I8ced72c4b553d41a57f26d64998118e8a77621f8
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/7
Tested-by: build bot (Jenkins)
in the current code, the defines for the APM_CNT (0xb2) register
are duplicated in almost every place where it is used. define those
values in cpu/x86/smm.h, and only include this file.
And while at it, fixup whitespace.
Change-Id: Iae712aff53322acd51e89986c2abf4c794e25484
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/4
Tested-by: build bot (Jenkins)
"make gitconfig" installs the gerrit commit-msg hook and validates
that user.name and user.email are configured.
No data will be overwritten.
Change-Id: I49ec98538574866e7ad6238ff3d02b9c1beef1bb
Reviewed-on: http://review.coreboot.org/2
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Code used 'int' as return type, but the cmos option is only one
bit. get_option returned with the value in bit 0-7, but all remaining
bits were left unitialized by get_option(). fix this by using char
as type.
Change-Id: I60e609164277380f936f66c99ef9508fa6a6b67c
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/5
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
motherboards can use this hook to get notified if someone writes
to the APM_CNT port (0xb2). If the hook returns 1, the chipset
specific hook is also skipped.
Change-Id: I05f1a27cebf9d25db8064f2adfd2a0f5759e48b5
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/3
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Jenkins can produce reports from JUnit test cases, so we fake testcases
for each board.
Change-Id: I34d46d15c83f4f04d2228f302eb626b261ac098d
Reviewed-on: http://review.coreboot.org/1
Tested-by: build bot (Jenkins)
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Enable rom cache early to reduce boot time.
Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6633 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Fix memory allocation problem in amdInitLate. Disabled until further debug.
Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6632 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Declare legacy video frame buffer so that Windows generic VGA driver will work.
Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6630 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Declare RTC as not PIIX4 compatible to match AMD hardware.
Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6629 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Make fadt revision match its length. Solves Windows 7 checked build assert.
Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6628 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
efdesign98