Apply the measured rise and fall times for I2C bus 1 on Eve
so it can be tuned properly for 400KHz operation.
BUG=chrome-os-partner:63020
TEST=verify I2C1 bus speed with a scope
Change-Id: I32b5aa460ea35aadca7f3d52324a64880764919f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18396
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently UART0 GPIOs are being put into native mode during FSP-S
stage, so have ramstage re-configure them back to regular GPIO mode.
GPP_C8 does not seem to be functioning properly when routed to the
APIC, possibly due to the UART0 being enabled even though it is unused,
which is required because UART0 is PCI 1e.0 and so must be present for
other 1e.x functions to be enumerated. Instead, use this pin as a GPIO
interrupt so it will be routed through the GPIO controller at IRQ 14.
GPP_C9 was inverted and was only working because the pin was being
re-configured in FSP-S.
Also export the reset gpio as a device property so it can be used by
the kernel driver, which will stop it from complaining at boot.
BUG=chrome-os-partner:61233
TEST=verify that the interrupt and device is functional in the OS
Change-Id: Iaf9efbf50a13a981c6a9bbd507475777837e9c12
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18395
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
There is an enable_s0ix config option in the devicetree that should
be used to disable it when not set:
- do not export C8/C9/C10 C-states in _CST
- do not enable SLP_S0 in FSP
BUG=chrome-os-partner:58666
TEST=test on eve board to ensure that OS only sees 3 ACPI C-states
instead of 6 and that it no longer attempts to enter C10
Change-Id: I90e4dc776d1d17d0b700cda63c8476786cd2e4ff
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18394
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add support for more ACPI features in the generic SPI ACPI
driver so it can be flexible enough to support more devices,
or devices in different configurations.
- add a wake pin
- add support for using IRQ GPIO instead of PIRQ
- add power resource support with enable and reset gpios
BUG=chrome-os-partner:61233
TEST=ensure existing SSDT generation is unchanged,
and test that new features generate expected code
Change-Id: Ibe37cc87e488004baa2c08a369f73c86e6cd6dce
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18393
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add individual macros for the various interrupt types so
they can be used in devicetree.
BUG=chrome-os-partner:58666
TEST=nothing uses this yet, will be used in an upcoming commit
Change-Id: I2a569f60fcc0815835615656b09670987036b848
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18392
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Move the function that adds a power resource block from
i2c/generic to the acpi device code at src/arch/x86/acpi_device.c
so it can be used by more drivers.
BUG=chrome-os-partner:61233
TEST=verify SSDT table generation is unchanged
Change-Id: I0ffb61a4f46028cbe912e85c0124d9f5200b9c76
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18391
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The hybrid driver select by DRIVERS_LENOVO_HYBRID_GRAPHICS doesn't work
for t400/t500.
Replace it with a custom romstage implementation.
Tested on Lenovo T500 with dual graphics:
* Intel Native GFX init
* AMD VBios
* GNU Linux 4.8.13
* SeaBios as payload
* Discrete is working (44 W)
* Integrated is working (24 W)
* Switchable is working (34 W)
** Both GPUs are enabled, with Intel being connected to the panel
** DRI_PRIME allows to use AMD GPU
** ACPI doesn't seem to work (no vgaswitcheroo)
Depends on Change-Id: I4dc00005270240c048272b2e4f52ae46ba1c9422
Depends on Change-Id: If389016f3bb0c4c2fd0b826914997a87a9137201
Change-Id: I7496876e9b434d4a2388e1ede27ac604670339b7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18010
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
This company doesn't do custom hardware anymore and doesn't
host the sources anymore. We therefore point to the archived
sources instead.
Change-Id: I5ce4f6a468b852fc1d0947fe2b28a5297f14c437
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/11889
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins)
Prmrr configuration is supported by Kabylake FSP-M with UPD provided.
It is required as one of the SGX initialization steps in BIOS.
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Tested on Eve, verified uncore PRMRR MSRs get programmed to set
size and boot.
Change-Id: I2b3dc7c92487505165ee429bd1a37bd60ceac8f3
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/18361
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It rewrites the results of receive enable stored in the upper nvram
region, to avoid running receive enable again.
Some debug info is also printed about the self-refresh registers.
(Not enforcing a reset here, since 0 does not necessarily mean it's
not in self-refresh).
Change-Id: Ib54bc5c7b0fed6d975ffc31f037b5179d9e5600b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17998
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Previously the raminit failed on hot reset and to work around this
issue it unconditionally did a cold reset.
This has the following issues:
* it's slow;
* when the OS issues a hot reset some disk drives expect their 5V
power supply to remain on, which gets cut off by a cold reset,
causing data corruption.
To fix this some steps in raminit must be ommited on the reset path.
This includes receive enable calibration.
To achieve this it stores receive enable results in RTC nvram for them
to be rewritten on the resume path.
Note: The same thing needs to be done on the S3 resume path.
Calling a hot reset after raminit "outb(0x6, 0cf9)" works.
Change-Id: I6601dd90aebd071a0de7cec070487b0f9845bc30
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18009
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Maxim 98927 kernel driver requires entries in the ACPI SSDT table,
add a SSDT generator as part of this driver.
BUG=chrome-os-partner:62051
BRANCH=None
TEST=After boot, dump and verify that the generated SSDT ACPI table has the
required entries.
Change-Id: Ic2d4d8449288bc00d085852220b2e1e7a208e9ef
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: M Naveen <naveen.m@intel.com>
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: https://review.coreboot.org/18211
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently there is no distinction between mainboards using
Skylake or Kabylake SoC, Add a config option for Kabylake
SoC to allow mainboards to explicitly select if they are
using it.
Change-Id: Ie7960bd81f88a223894afe3115ddc0bc637e4be4
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18312
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Configure GRUB to build with boot time statistics. That allows users
to add that module to GRUB by adding `boottime` to the list of extra
modules.
Change-Id: I76a07e49aecb37652fe8c7d6a9421fd464424287
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/18367
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Some simple implementation of the MultiBoot protocol may not pass a
memory map (MULTIBOOT_FLAGS_MMAP missing in the flags) but just the two
values for low and high memory, indicated by the MULTIBOOT_FLAGS_MEMINFO
flag.
Support those kind of boot loaders too, instead of falling back to the
hard-coded values in lib_get_sysinfo().
Tested with a multiboot enhanced version of FILO.
Change-Id: I22cf9e3ec0075aff040390bd177c5cd22d439b81
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18350
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
There are MSRs that are programmable per-core not per-thread, so add
a function to check whether current executing CPU is a primary core
or a "hyperthreaded"/secondary core. For instance when trying to
program Core PRMRR MSRs(per-core) with mp_init, cpu exception is thrown
from the secondary thread. This function was used to avoid that.
Potentially this function can be put to common code or arch/x86 or cpu/x86.
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Tested on Eve, verified core PRMRR MSRs get programmed only on primary
thread avoiding exeception.
Change-Id: Ic9648351fadf912164a39206788859baf3e5c173
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/18366
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Implement the argc/argv passing as described in coreboot’s payload API:
http://www.coreboot.org/Payload_API
While at it, give the code some love by not needlessly trashing register
values.
Change-Id: Ib830f2c67b631b7216843203cefd55d9bb780d83
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18336
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Simplify the code by directly using the arguments on the stack as base
pointer relative memory references, instead of loading them into
intermediate registers first.
Make it more robust by preserving all callee saved registers mandated by
the C calling convention (and only those), namely EBP, EBX, ESI and EDI.
Don't assume anything about the register state when the called function
returns -- beside the segment registers and the stack pointer to be
still the same as before the call.
Change-Id: I383d6ccefc5b3d5cca37a1c9b638c231bbc48aa8
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18335
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
According to coreboot’s payload API [1], the called payload should be
able to return a value via %eax. Support this by changing the prototype
of start_main() and pass on the return value of main() to the caller
instead of discarding it.
[1] https://www.coreboot.org/Payload_API
Change-Id: I8442faea19cc8e04487092f8e61aa4e5cba3ba76
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18334
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
According to coreboot’s payload API [1] the argc value should be passed
at stack offset 0x10, so we need to push a dummy value to comply to the
API.
[1] https://www.coreboot.org/Payload_API
Change-Id: Id20424185a5bf7e4d94de1886a2cece3f3968371
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18333
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add support for generating digitizer node in SSDT using wacom i2c
driver.
BUG=None
BRANCH=None
TEST=Verified that the node shows up in SSDT.
Change-Id: If7e1e2463778c2ff7263eff995def149457edcde
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18373
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Similar to I2C driver, add support for generating SPI device and
required properties in SSDT for ACPI.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles succesfully. Verified SPI device generated in SSDT on
poppy.
Change-Id: Ic4da79c823131d54d9eb3652b86f6e40fe643ab5
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18342
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
scan_smbus routine does not perform any smbus specific operation. Thus,
rename the routine to scan_generic_bus so that it can be used by other
buses like SPI. Add a wrapper scan_smbus to allow other users of smbus
scan to continue working as before.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: I8ca1a2b7f2906d186ec39e9223ce18b8a1f27196
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18363
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add support for a new "SPI" device type in the devicetree to bind a
device on the SPI bus. Allow device to provide chip select number for
the device as a parameter.
Add spi_bus_operations with operation dev_to_bus which allows SoCs to
define a translation method for converting "struct device" into a unique
SPI bus number.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully.
Change-Id: I86f09516d3cddd619fef23a4659c9e4eadbcf3fa
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18340
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Update sconfig lex and yacc files to add support for a new "SPI" device
type in the devicetree. SPI device takes only parameter i.e. chip select
number for the device on the SPI bus.
Re-generate the shipped files for sconfig using flex 2.6.0 and bison
3.0.4 (make CONFIG_SCONFIG_GENPARSER=1). Clean up local paths that leak
into generated files.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully.
Change-Id: If0831e25b3e4ed87827ad92356d7bf47b6387884
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18339
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add a new callback to spi_ctrlr structure - get_config - to obtain
configuration of SPI bus from the controller driver. Also, move common
config definitions from acpi_device.h to spi-generic.h
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: I412c8c70167d18058a32041c2310bc1c884043ce
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18337
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The pointer to write the return value to is in %ecx, not %eax. Writing
to (%eax) leads to memory corruptions as %eax holds the return value,
e.g. would write zero to address zero for a "successful" returning
payload.
Change-Id: I82df27ae89a9e3d25f479ebdda2b50ea57565459
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18332
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
According to coreboot’s payload API [1] the magic value passed to the
payload should be 0x12345678, not 12345678. Fix that.
[1] https://www.coreboot.org/Payload_API
Change-Id: I10a7f7b1a4aec100416c5e7e4ba7f8add10ef5c5
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18331
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This commit makes a basic adjustment for GPIOs, device tree, flash map and
MRC settings. With these basic settings the mainboard boots into
Linux lubuntu 4.8.0-22-generic using SeaBIOS. More adjustments will follow.
Change-Id: Ia920d236814f2e6a9b777dd1e4b4feef0ddf7721
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/18292
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
As per BWG, CPU MP Init (loading ucode) should be done prior
to BIOS_RESET_CPL. Hence, pull MP Init to BS_DEV_INIT_CHIPS Entry
(before FSP-S call).
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Boot to OS with all threads enabled.
Change-Id: Ia6f83d466fb27e1290da84abe7832dc814b5273a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18287
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The four options are only used in X86:
- BOOTBLOCK_SIMPLE
- BOOTBLOCK_NORMAL
- BOOTBLOCK_SOURCE
- SKIP_MAX_REBOOT_CNT_CLEAR
Move them all into src/arch/x86/Kconfig - this puts them in the chipset
menu instead of general setup.
Verified that this makes no significant changes to any config file.
Change-Id: I2798ef67a8c6aed5afac34322be15fdf0c794059
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17909
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
For boolean types, 'n' is the default default value - it doesn't
NEED to be set. If it IS set, it prevents a later default from
being set. So by removing the 'default n' statements from the
early symbols, they can be overridden other places in the tree.
Verified that this makes no significant changes to any config file.
Change-Id: I1b5b66bd8a3df8154a348b5272c56c88829b3ab4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17908
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This reverts commit 32997fb0bc.
This change is breaking I2S audio on Kabylake platforms so
revert the change to fix audio.
BUG=chrome-os-partner:61548,chrome-os-partner:61009
TEST=manual testing on Eve P1 system
Change-Id: I3212c8be83078ed57e38501386605e67b87d5bd0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18360
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Some variants need the internal pull resistor on GPIO_SSUS_40
set explicitly to pull down rather than disabling the pull,
in order for the ram-id to be read correctly via GPIO.
Correct this by adding a function to enable and set the internal pull
and define its use as needed in the board's variant.h.
Chromium source:
branch: firmware-gnawty-5216.239.B
/src/soc/intel/baytrail/baytrail/gpio.h#418
/src/mainboard/google/gnawty/romstage.c#60
Test: boot 4GB Candy board and observe correct RAM id, amount detected
Change-Id: I8823c27385f4422184b5afa57f6048f7ff2a25ab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/18309
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Those are the result from tracing what linux or the option rom do
but are not needed here.
TESTED on Thinkpad X60.
Change-Id: I4297a78c4ab6a19ef6161778c993fc3f3fb08c7e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18294
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Poppy doesn't support 8042 keyboard. Select
NO_FADT_8042 to disable 8042 in FADT header.
Kernel will not try to access 8042 region
if 8042.FADT=0
BUG=chrome-os-partner:61858
TEST=Boot OS and verify FADT 8042 flag
Change-Id: I00182eb4b059d4d9f0705d349dc98651e3955f0d
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://review.coreboot.org/18311
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Kernel relies on FADT 8042 flag to enable/disable
8042 interface. If FADT reports 8042 capability and
8042 (/PS2) capability is actually disabled by coreboot,
kernel would assume the presence of 8042 based on the
FADT flag. This results in undesired system power off when
kernel tries to access the 8042 memory region. To address
this, CONFIG_NO_FADT_8042 was added to selectively
disable 8042 on FADT.
BUG=chrome-os-partner:61858
TEST=Boot OS and verify FADT 8042 flag
Change-Id: Ic80b3835cb5cccdde1203e24a58e28746b0196fc
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://review.coreboot.org/18307
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Duncan Laurie