Note that due to UNKNOWN_TSC_RATE, each stage will have
a slow run of calibrate_tsc_with_pit(). This is easy enough
to fix with followup implementation of tsc_freq_mhz() for
the cpu.
Change-Id: I0f5e16993e19342dfc4801663e0025bb4cee022a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36525
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CONFIG_FSP_CAR should not be a user visible option, but depends on the
choice presented in the soc Kconfig.
This also removes the dependencies on ADD_FSP_BINARIES. You need to
included those for other stages too so there is no need to make this
requirement explicit for FSP-T.
Change-Id: Ida32e9c4f5839aef4d4deb7a1c7fabe6335a5d2a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This is done in postcar stage. This also assumes CAR tear down will
always be done in postcar stage.
Change-Id: I0ff1624c20b9649ca0a8fa31c342bf99530076d7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tune stapm percentage from 80 to 68 and time from 250 second
to 90 second make them meet Lenovo temperature spec.
BUG=b:143859022
TEST=build firmware and install it to DUT and run fishbowl 1000,
check temperature whether meets spec.
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I254140c9d242ed918b3b689d4fb4a1d0e871cd55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Removes unnecessary information about the Ring Sliced VR configuration
from another board with FSP1.1 (which is no longer supported).
Change-Id: Ia2b90d9ede782852c2127da972333bada378b217
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Modifies the device tree to use the ACPI SSDT generator[1] for NCT6791D
SuperIO, dropping the need to include code from the superio.asl, which
was inherited from another chip (NCT6776) and required fixes. SSDT gen
support for Nuvoton NCT6791D chip was added in the previous patch [2].
[1] https://review.coreboot.org/c/coreboot/+/33033
[2] https://review.coreboot.org/c/coreboot/+/36379
Change-Id: I57b67d10968e5e035536bcb0d8329ce09d50194b
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Internal/external displays functional on all variants
other than Samus. Unable to verify external outputs on
Samus (USB-C using DP/HDMI adapter).
Test: build/boot lulu variant with libgfxinit, verify internal/
external displays functional prior to OS display driver loaded.
Both linear framebuffer and scaled VGA text modes functional.
Change-Id: I867b2604861ebae02936e7fc0e7230a6adcb2d20
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The devicetree is not made for user-choosable options, thus introduce
Kconfig options for both SGX and the corresponding PRMRR size.
The PRMRR size Kconfig has been implemented as a maximum value. At
runtime the final PRMRR size gets selected by checking the supported
values in MSR_PRMRR_VALID_CONFIG and trying to select the value nearest
to the chosen one.
When "Maximum" is chosen, the highest possibly value from the MSR gets
used. When a too strict limit is set, coreboot will die, printing an
error message.
Tested successfully on X11SSM-F
Change-Id: I5f08e85898304bba6680075ca5d6bce26aef9a4d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
As of CB:36136 ebda and memmap are identical for skl, cnl and icl, thus
move them to common code.
Tested successfully on X11SSM-F
Change-Id: I9a20c814d2a6874fcb4ff99ef1a7825d891f74e2
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36137
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of doing our own calculations, rely on TOLUM returned by FSP
for cbmem_top. This (hopefully) saves us from making mistakes in weird
calculations of offsets and alignments.
Further this makes it easier to implement e.g. SGX PRMRR size selection
via Kconfig as we do not have to make any assumptions about alignments
but can simply pass (valid) values to FSP.
Tested successfully on X11SSM-F
Change-Id: If66a00d1320917bc68afb32c19db0e24c6732812
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36136
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Delete acpi_create_intel_hpet() which has been replaced
by acpi_write_hpet() in the corresponding soc folders
some time ago.
Change-Id: I788c9ef27cdc575eb8467cbef64ee52f4053e197
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Guckian
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add support for x86_64 bootblock on qemu.
Introduce a new approach to long mode support. The previous patch set
generated page tables at runtime and placed them in heap. The new
approach places the page tables in memory mapped ROM.
Introduce a new tool called pgtblgen that creates x86 long mode compatible
page tables and writes those to a file. The file is included into the CBFS
and placed at a predefined offset.
Add assembly code to load the page tables, based on a Kconfig symbol and
enter long in bootblock.
The code can be easily ported to real hardware bootblock.
Tested on qemu q35.
Change-Id: Iec92c6cea464c97c18a0811e2e91bc22133ace42
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Dead increment spotted out using clang-tools.
Value stored to 'some_delay_3_halfcycles' is never read.
Change-Id: I8133f9e8786006bd278d281a132b6a2bd863a967
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
le32_to_cpu spits out uint32_t on BE targets, cast it.
Change-Id: Idc99b0c133faa2aa15d06f998e7371d332ffa490
Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
All of the EC_EVENT_* macros can be replaced with the EC_HOST_EVENT_*
macros defined in ec_commands.h, which is synchronized from Chromium OS
ec repository.
BRANCH=none
BUG=none
TEST=emerge-kukui coreboot
Change-Id: I12c7101866d8365b87a6483a160187cc9526010a
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
To make debugging possible in a fallback setup, the serial console must
be set up in bootblock, thus drop the guard.
Change-Id: If0dd3c03ba52b4936eb234e6b2b61bb5ce044fcd
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36602
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This replaces the hardcoded delay by the new Kconfig option.
Change-Id: I8bf4ef7ad9beea7b3dc22e1567623a423597eff9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Some mainboards with an ASPEED BMC do the serial routing setup in the
BMC boot phase on cold boot. This results in scrambled console output
when this is not finished fast enough.
This adds a delay of 500ms as workaround in the BMCs uart setup that
can be selected at mainboard level.
A user may disable the workaround when using another BMC firmware like
OpenBMC, u-bmc or some custom BMC bootloader with fast serial setup.
Change-Id: I7d6599b76384fc94a00a9cfc1794ebfe34863ff9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36591
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows to use a common cbmem_top implementation.
Change-Id: I85efe3899607854c36d0ec594868f690eb724a7f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
On this platform the ramstage is run on a different core so passing
cbmem_top via calling arguments is not an option. To work around this
populate _cbmem_top_ptr with cbmem_top_chipset which is also used in
romstage.
Change-Id: I8799c12705e944162c05fb7225ae21d32a2a882b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36557
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This avoids the need for a platform specific implementation of
cbmem_top.
HOW TO TEST? There is no serial console for the qemu target...
Change-Id: I68aa09a46786eba37c009c5f08642445805b08eb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marty E. Plummer <hanetzer@startmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
While commented as 10 ms + 250 us, those delay loops actually
accounted for a total of 840 ms. And they seem unnecessary
as followup code has potentially infinite retries when
polling for status changes.
Tested on aopen/dxplplusu, dual-socket P4 Xeon HT model_f2x.
Change-Id: Ib7d1d66ed29c62d97073872f0b7809d719ac2324
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This is needed for the definition of the MCHBARx() macros.
Change-Id: I654344451c0568f306f39365fd07371b2d6cff04
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36555
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested on thinkpad X200 with CONFIG_H8_FN_KEY_AS_VBOOT_RECOVERY_SW
selected, the RW_A slot is properly selected unless the FN button is
pressed. 600+ms are spend waiting for the EC to be ready.
Change-Id: I689fe310e5b828f2e68fcbe9afd582f35738ed1d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35998
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Current design reset pin is connected to PLTRST.
GPP_E7 is stop pin for touch. Reserve reset pin for
next stage implement.
BUG=b:143733039
BRANCH=N/A
TEST=check touch screen can work properly
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I3ebd56ab49b87da425583da04f082e69293a023e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Set GPP_E16 reset to DEEP.
BUG=b:143057255
BRANCH=N/A
TEST=Measure GPP_E16 from S0 to S5 has no glitch
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I63932c6f5c8b7e6e9ab8aa55e69c629d29e7d1fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36511
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Kyösti Mälkki