We were not adding power management handling of GPIO_COM3 in gpio.asl
This can affect s0ix flow where platform won't go into s0ix since
GPIO_COM3 is not power gated.
BUG=b:188392183
BRANCH=None
TEST=Platform should enter to s0ix and GPIO COMM3 should not block an
entry to s0ix.
Change-Id: I3f269c66bdd6337adb0d2bd29d0b7d72ced19ec4
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
We recently added GPIO definition for PCIE vGPIO for Alder Lake.
We also need to disable GPIO dynamic PM for this community which is
already done for other communities as well.
BUG=b:188392183
BRANCH=None
TEST=Code compiles and Check if dynamic PM for GPIO COMM3 is also
disabled
Change-Id: I2f8645b8f4a9995e727a7623af97531c5de52892
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54383
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This removes the need to include this code separately on each
platform.
Change-Id: I3d848b1adca4921d7ffa2203348073f0a11d090e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The new kernel secdata v1 stores the last read EC hash, and reboots the
device during EC software sync when that hash didn't match the currently
active hash on the EC (this is used with TPM_CR50 to support EC-EFS2 and
pretty much a no-op for other devices). Generally, of course the whole
point of secdata is always that it persists across reboots, but with
MOCK_SECDATA we can't do that. Previously we always happened to somewhat
get away with presenting freshly-reinitialized data for MOCK_SECDATA on
every boot, but with the EC hash feature in secdata v1, that would cause
a reboot loop. The simplest solution is to just pretend we're a secdata
v0 device when using MOCK_SECDATA.
This was encountered on using a firmware built with MOCK_SECDATA but had
EC software sync enabled.
BUG=b:187843114
BRANCH=None
TEST=`USE=mocktpm cros build-ap -b keeby`; Flash keeby device, verify
that DUT does not continuously reboot with EC software sync enabled.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: Id8e81afcddadf27d9eec274f7f85ff1520315aaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
To preserve reproducibility, temporarily guard mainboard.c contents.
This will be removed once all boards have become variants.
Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus H61M-CS
remains identical when not adding the .config file in it.
Change-Id: I1ffb41470d24713a4a7f0689958b733d4b1bdf52
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8H61-M PRO
remains identical when not adding the .config file in it.
Change-Id: Iaa53a8a1b75f4c7359e32c6cd8c8a488c5763bbe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Get ready to squash all Asus H61 boards together, so as to factor out
lots of redundant code.
Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8H61-M LX3 R2.0
remains identical when not adding the .config file in it.
Change-Id: I738197bf4d5ea8b879ae26ecbcb0cf3714316662
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In preparation to switch the Asus H61 boards to a variant setup, sort
the `select` lines in Kconfig alphabetically.
Change-Id: I91ee7dc601f1fc52a7d68f66555143156b91ebf9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54365
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In preparation to switch the Asus H61 boards to a variant setup, sort
the `select` lines in Kconfig alphabetically.
Change-Id: Ia5a8d36f78db2262b4c8d48cbb4dd16718d01475
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54364
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In preparation to switch the Asus H61 boards to a variant setup, sort
the `select` lines in Kconfig alphabetically.
Change-Id: I96486d57250e901d872e4ef12967c2aadd9791ea
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54363
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 65ddbb720b (mb/asus/p8h61-m_pro: Add new mainboard) added this
file, and I authored this commit. Since most gma-mainboard.ads files are
licensed as GPL-2.0-or-later, relicense this one for consistency.
Change-Id: I2d28150f4c97ba600cb46fead7bb29cdc65c5baf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54362
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These boards have a socketed CPU, and the PCI device ID for the iGPU
depends on the installed CPU. Specifying a default doesn't make sense.
Change-Id: Iee6749e4fb691f09664cc6ffb3cbf66e4230fa9c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54361
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Mainboards with variants may not always use the same cmos.layout file.
Turn the hardcoded path into a Kconfig symbol to allow changing it.
Tested with BUILD_TIMELESS=1: Without including the config file in the
coreboot.rom and with `USE_OPTION_TABLE` selected, building for the Asus
P8H61-M PRO produces an identical coreboot image.
Change-Id: I4cc622dcb70855c06cb8a816c34406f8421180df
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54366
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
VSA (Virtual System Architecture) is specific to AMD Geode CPUs, which
are no longer supported in current coreboot. Drop this remnant.
Change-Id: I28bf61cb953e3352b59aa91059341e4de8f84f23
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Most boards use `device lapic 0 on` with zero written in decimal.
For the sake of consistency, update the remaining boards to follow suit.
Change-Id: I1d3b1ac107e33aae11189cdd5e719b8e48b10f08
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Most boards use `device domain 0 on` with zero written in decimal.
For the sake of consistency, update the remaining boards to follow suit.
Change-Id: I6e2f0a19d57cfe6fc4e4ac4d14310133ad6b01d8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Most boards use `device cpu_cluster 0 on` with zero written in decimal.
For the sake of consistency, update the remaining boards to follow suit.
Change-Id: I083c8f8e9b38ddcc217dc8bf17ae3c9473ba77e9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Definition for NAV_FWE BIT was added in commit e6e8b3d
Even if try to set this BIT it was not getting set since PAD_CFG_DW0
mask will make it 0 since this bit was not part of mask.
Adding NAV_FWE to mask will resolve this issue and BIT will be set/unset
as per programming in mainboard.
TEST=Check GPIO register dump and see if BIT is getting set properly.
Change-Id: I970ae81ed36da45c3acc61814980b2e6ff889445
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54350
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
coreboot test targets help section was missing an empty line at the end.
This caused the next help section to be visually merged with it.
Empty line makes help output more aesthetic.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I2f7202b0a636f62b60788215058611c9c86183de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Coverity reported unitialized array spd_block.addr_map which values are
not used. Add initialization to silence Coverity and avoid errors in
the future.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Found-by: Coverity CID 1453145 1453146 1453147 1453148 1453149
Change-Id: If301f9e5d9e06ad26769bd0717f1f906e620d82d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Since upstream edk2 totally drop 32-bit support for UefiPayload, totaly drop it.
Test: Build and run qemu successful boot up into EFI shell with UEFIPAYLOAD option.
Change-Id: Iadd9a3c455fad4eede8a0a017415acd2c57fba04
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54189
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable/disable LTE function based on LTE bit of FW_CONFIG.
The LTE function settings are included GPIO settings, USB port settings and
power off sequence.
BUG=b:187797408
BRANCH=dedede
TEST=Build and test the change on cret.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ib926e99aaf9df433a7cff71180ee55431d69f718
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Since we have TPM disabled on ADLRVP, if we enable EC sync, it keeps
rebooting with hash error.
Change-Id: I62a4fceb83dc6b20f699b4662e8f421aadafdee5
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
PSP whitelist bootloader (PSPBTLDR_WL_FILE) should be copied to type
0x73 entry and not type 0x01 (stage1 bootloader). We will also need to
change WHL BL filename (Type0x01->Type0x73) in a separate CL.
BUG=b:181135622
Change-Id: I71539a2065546547edc8a2621474cd1388b6434b
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The `tcrt` and `tpsv` values in GNVS can be used to implement thermal
management in ACPI. However, not all mainboards use these values.
On mainboards where `tcrt` and `tpsv` are not used in ACPI tables and
are the only values set in the `mainboard_fill_gnvs` function, remove
them as well as the entire `acpi_tables.c` file. Most files come from
autoport, which unconditionally generates this file.
Change-Id: If2315ddd9700e2da0a24ffecc20acb5c1a1d688e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I07bdf7f85f8411e04da8a94da7de1e7b93c9e921
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
To support gpio reset SoC, we need to pass the reset gpio parameter to
BL31.
TEST=execute `echo b > /proc/sysrq-trigger` to reboot system
Change-Id: I1a55216c0d5a00bbdb373d931bd50ebe7ca5694f
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
PSP_SOFTFUSE_BITS used to be like this:
15 0 29 "28 6"
It causes internal shell report error:
/bin/sh: -c: line 0: unexpected EOF while looking for matching `"'
/bin/sh: -c: line 1: syntax error: unexpected end of file
/bin/sh: -c: line 0: unexpected EOF while looking for matching `"'
/bin/sh: -c: line 1: syntax error: unexpected end of file
Change-Id: I716f19d37fb57b9ef3fc7259c6dcca7d21022d32
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
DisableDimmMc0Ch0 upds changed to DisableMc0Ch0 in new FSP releases. The definition
of the upd also changed. Changed FSP meminit code to work based on new definition of the UPDs.
Before:
0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs
After:
0:Enable, 1:Disable
TEST=Boot to OS
Cq-Depend: chrome-internal:3831865, chrome-internal:3831864, chrome-internal:3831913
Cq-Depend: chromium:TODO
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I5af11ae99db3bbe3373a9bd4ce36453b58d62fec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54036
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The headers added are generated as per FSP v2162_00.
Previous FSP version was v2117_00.
Changes Include:
- Adjust UPD Offset in FspmUpd.h and FspsUpd.h
- Remove DisableDimmMc*Ch* Upds in FspmUpd.h
- Add DisableMc*Ch* Upds in FspmUpd.h
- Few UPDs description update in FspmUpd.h and FspsUpd.h
Change DisableDimmMc*Ch* to DisableMc*Ch* in meminit.c to avoid
compilation failure other change related to UPDs name change will be
part of next patch in relation chain.
BUG=b:187189546
BRANCH=None
TEST=Build and boot ADLRVP using all the patch in relation chain.
Change-Id: Ic8d7980146f1bfc96472ef504cf9f16eee63a13e
Cq-Depend: chrome-internal:3831865, chrome-internal:3831864, chrome-internal:3831913
Cq-Depend: chromium:TODO
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54083
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The SMBus I/O bar is not relocated because it's reported to the
allocator as a fixed resource. Drop these out-of-date comments.
Change-Id: I0149764fd231b3a4e56a5a9b7f4ae61f7954cf7a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Copy the text from the [Web site](https://coreboot.org/users.html).
Change-Id: I805f558514eb50580b5bd79bd4f964e66a15158d
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This commit has coreboot create the Chrome OS Firmware Management
Parameters (FWMP) space in the TPM. The space will be defined and the
contents initialized to the defaults.
BUG=b:184677625
BRANCH=None
TEST=emerge-keeby coreboot
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I1f566e00f11046ff9a9891c65660af50fbb83675
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Andrey Pronin <apronin@chromium.org>
The name `set_space()` seems to imply that it's writing to a TPM space
when actually, the function can create a space and write to it. This
commit attempts to make that a bit more clear. Additionally, in order
to use the correct sizes when creating the space, this commit also
refactors the functions slightly to incorporate the vboot context object
such that the correct sizes are used. The various vboot APIs will
return the size of the created object that we can then create the space
with.
BUG=b:184677625
BRANCH=None
TEST=`emerge-keeby coreboot`
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I80a8342c51d7bfaa0cb2eb3fd37240425d5901be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54308
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit updates the vboot submodule from commit 57c0c5b:
cgpt: Move all GPT on SPI-NOR infra behind a flag
to e681c37:
change node locked version expectations
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: Ifd130e3f66f1819f59f00703f0ad0c2278b544bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Configure DDI-0 connector type to DP.
BUG=b:187856682
TEST=Build and boot into OS
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: Ic8af14509b0d246c5c2da6e1a48991384471e69f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Updating from commit id 7ad39818b:
2020-10-12 09:16:21 +0000 - (Merge "mediatek: mt8192: add GIC600 support" into integration)
to commit id 96404aa27:
2021-05-13 18:27:27 +0200 - (Merge "build(hooks): update Commitizen to ^4.2.4" into integration)
This brings in 861 new commits.
Change-Id: I912545022e4320b86ab8a382144c02e315d0c835
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
TCSS OC pins have not been correctly configured for volteer.
This patch fills the value from devicetree to correct the OC pins
mapping.
BUG=b:184660529
BRANCH=None
TEST="emerge-volteer coreboot chromeos-bootimage", flash volteer2 and
verify CpuUsb3OverCurrentPin UPDs get set correctly.
Change-Id: I12da755a1d3b9ec3ed0a2dbfb0782313dd49c7e9
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
We need to change OC pin for type C USB3 ports and it depends
on the board design. Allowing it to be filled by devicetree will
make it easier to change the mapping based on the board design.
BUG=b:184660529
TEST="emerge-volteer coreboot" compiles without error.
Change-Id: I5058a18b1f4d11701cebbba85734fbc279539e52
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Maulik V Vaghela