UART pad configuration should not be done in common code, because that
may cause short circuits, when the user sets a wrong UART index. Thus,
add the corresponding pads to the early UART gpio table for the board as
a first step. Common UART pad config code then gets dropped in CB:48829.
Also switch to `bootblock_mainboard_early_init` to configure the pads in
early bootblock before console initialization, to make the console work
as early as possible. The board does not do any other gpio configuration
in bootblock, so this should not influence behaviour in a negative way
(e.g. breaking overrides).
Change-Id: Iac8a6e386b708ae5c4dbf0677bfe05f1358bf8fd
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49442
Tested-by: siemens-bot
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It's a static value that is neither referenced from SMI handler
nor needs to be updated on S3 resume path.
Change-Id: Ife6611a11e5627d39d59e0e93af9aa2d87885601
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50121
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Baytrail had (only) occurence of DwordMemory vs DWordMemory.
Braswell one had bogus comments about the PCI memory range.
The actual region details are dynamically filled in _CRS.
Change-Id: I8d1bf45c6e5520c0b7643602843c665bfb81f9da
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It's assumed in ASL already that the banks appear one
after other in ACPIMMIO space. There is no need for
the separation of accessor functions by name.
Change-Id: I4c8c3f2028ca89dca5c7f0548fcd18e1045999d6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
From the output of 'objdump -x dram.elf', the DRAM blob needs 222K
memory, but currently only 208K is reserved for it. Since MT8192 has 1MB
SRAM L2C, increase SRAM_L2C_END to 0x00300000, and reorganize regions in
SRAM_L2C to have larger DRAM_INIT_CODE (256K). The size of
OVERLAP_DECOMPRESSOR_VERSTAGE_ROMSTAGE is also increased to 252K.
BUG=b:170687062
TEST=emerge-asurada coreboot
TEST=Asurada booted successfully
BRANCH=none
Cq-Depend: chrome-internal:3568265
Change-Id: I062f00739b72cf6b1bb7ac3318b91721fbe226cc
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
It is the same for all three mainboards.
Change-Id: Ic5786bcc29e2549d6fc935d60c699c1cab84b237
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50027
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As per Hardware Architecture Specification (HAS) ADL-P has 7 CLKSRC
and 10 CLKREQ (7 SRCCLK is internal and 3 SRCCLK from external CLK chip).
ADL-M has 6 SRCCLK and CLKREQ (no external CLK chip).
Change-Id: I7d223c165f819669722cbc80245fa8ec20372352
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50130
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds the missing `GBB_FLAG_ENABLE_UDC` as a config in
vboot/Kconfig (just like the other GBB flags) and uses its value to
configure GBB_FLAGS Makefile variable. This is done to allow the
mainboard to configure GBB flags by selecting appropriate configs in
Kconfig.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I6b397713d643cf9461294e6928596dc847ace6bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50110
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The BH720 PCR registers are accessed using an index/data register pair.
Introduce some helper functions to clarify the PCR register operations.
Change-Id: I1a48b10071af20dca61b7dd90c5a70bc9d1089b4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
It's a static value that is neither referenced from SMI handler
nor needs to be updated on S3 resume path.
Change-Id: I3928e5973fe65d9a4fe7975e5d5584efe6e5f2f8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It's a static value that is neither referenced from SMI handler
nor needs to be updated on S3 resume path.
Change-Id: Iab2741242b0e2df8a0429ffaad270ce21882588c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Enable Acoustic noise mitigation for magolor and set slew rate to 1/8
which is calibrated value for the board.
BUG=b:178678267
BRANCH=dedede
TEST=build firmware to UPD and Acoustic noise test
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: Idea2a801399bb5c7e0b8e59ee7a826c86a44f4ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50099
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
UPD PlatformDebugConsent field is not configured.
The config SOC_INTEL_ELKHARTLAKE_DEBUG_CONSENT is available but not
used. Use this config value for PlatformDebugConsent.
BUG= N/A
TEST= Build Intel Elkhart Lake
Change-Id: I697fb611dfb23e107fa8ef1543424b9797a7d027
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50108
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add device ID of Cannon Lake PCH-H Mobile HALO SATA controller
in supported device table.
Bug=N/A
TEST=Build of Intel Coffeelake H SO-DIMM DDR4 RVP11 successfully
completed
Change-Id: Ie1c2aa8273a53c47d7b3571394bcd85b59ab1142
Signed-off-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Add SATA controller ID for Cannon Lake PCH-H Mobile HALO
(see document number: 571182)
Add SPDX license header
Bug=N/A
TEST=Build of Intel Coffeelake H SO-DIMM DDR4 RVP11 successfully
completed
Change-Id: Ic7e6ace2a24b4278b04caa58be907d38f4d117cd
Signed-off-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
If for a stage __CONSOLE_ENABLE__ is 0, then there would be no
prototype for a get_console_loglevel() definition.
Change-Id: I805078921a5cc1506685f8aada3af5c5241260b7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50083
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is useful to know if MCU have been applied successfully.
On the start of MP init lines similar to:
"AP: slot 1 apic_id 1, MCU rev: 0x0700001d" will be printed.
The example is taken from the log of an ocp/deltalake.
Change-Id: Ia0a6428b41d07f87943f3aa7736b8cb457fdd15a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49840
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For SMBIOS type 3, add function to override number of power cords
Tested=Exectute dmidecode -t 3 to verify.
Signed-off-by: JingleHsuWiwynn <jingle_hsu@wiwynn.com>
Change-Id: I7dee3a944a49ffcfdc2f4408d92a17aa39761bb0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Initiate peripheral buses based on latest schematic.
BUG=b:174266035
TEST=Build Test
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ibf48aceca7ac8774b0353e31bd81e1880c4066ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change moves the selection of SOC_INTEL_CSE_LITE_SKU into Kconfig
under BOARD_GOOGLE_BASEBOARD_VOLTEER instead of requiring each
individual board to select it.
TEST=Verified that timeless build does not result in any changes.
Change-Id: I2d94931fdc3077794bed5cc51708b5a5d9e64972
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This variant never really got used and can be deprecated.
Change-Id: I5d59460c90266ba5f9c3bdb951f53a37ffae9e03
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
A new schematic revision indicates that the old wake pin is not used,
and brya will only use 1 IRQ pin from EC, routed to GPP_F17
BUG=b:178605367
TEST=Build test
Signed-off-by: Boris Mittelberg <bmbm@google.com>
Change-Id: Ia2bc5b1562ab30b4461fc7e3b1a4bc3e370db588
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This reverts commit f41645c34d.
In Dragonair, during the MP stage, one of the resistors needed
for this functionality has been removed. This results in the
privacy-switch not readable back by the system.
BUG=b:178458332
Change-Id: I0781f338d5ecd89fccee613fb13ea25c59385625
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Jakub Czapiga