Commit Graph

10908 Commits

Author SHA1 Message Date
Paul Menzel 4dfc50b877 mainboard.c: Fix typo in appro*p*riate in comment
Use the following command to fix all occurences.

	$ git grep -l approriate | xargs sed -i 's/approriate/appropriate/g'

Change-Id: I4cbba972bb445c2407ef2e63ffb3068fc948f1c6
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5987
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-13 09:39:28 +02:00
Dave Frodin 9b800ae954 southbridge/amd: Change #if defined to #if IS_ENABLED
The IMC functions were being called and timing out when the
CONFIG_SB800_IMC_FWM/CONFIG_HUDSON_IMC_FWM were defined as 0.
Changing to a IS_ENABLED will keep the IMC handshake from
occuring if the IMC firmware isn't running.

Tested on a Persimmon platform which makes three calls to
spi_claim_bus() with each call timing out after 500ms.

Change-Id: I5d4bbcecf003b93704553b495a16bcd15f66763b
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5974
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-12 20:13:21 +02:00
Martin Roth 41ea7230f7 bayleybay_fsp Kconfig: Remove unnecessary overrides
Use the default mmconf base address and fsp locations.

Change-Id: Ia9116b0f0fc799592df2a10b10e086cfc88b394c
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5982
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-12 20:10:23 +02:00
Kyösti Mälkki 33eaf3a715 superio/smscsuperio: Fix chip detection
There was dereference of NULL dev->ops in pnp_enter/exit_conf_mode()
as those calls were made before pnp_enable_devices() was run.
Since hardware did not enter configuration mode, detection failed with
ID and REV read as 0xff.

Change-Id: If13086707cd86e392890ccf4f717e13a87f3317f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5949
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-06-12 15:10:37 +02:00
Vladimir Serbinenko afc8d98769 intel/bd82x6x: Skip unknown MBP.
Allow skipping unknown MBP rather than bailing out.

Change-Id: I9a54858c37d73e320de77aea5a05ab5dcf67cd69
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5976
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-06-12 14:57:15 +02:00
Paul Menzel 209238755a device/device_util.c: Fix wording in comment of `new_resource()`
Change-Id: Ieb0d5de37870a359f3a7ea1543640e26f86c1684
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5952
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11 20:37:50 +02:00
Dave Frodin ac1b875b55 amd/southbridge/lpc: SPI BAR has fixed size/location
The CIMX sb700/sb800/sb900 and agesa/hudson code was treating
the LPC SPI BAR as a normal PCI BAR. This will set the
resources for a fixed size at a fixed address. This was tested
on hp/abm, amd/persimmon, and gizmosphere/gizmo boards.

Change-Id: I1367efe0bbb53b7727258585963f61f4bd02ea1d
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5947
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11 20:06:21 +02:00
Vladimir Serbinenko 61f902d4a7 ibexpeak: Set number of USB ports.
Change-Id: Ife3febcc88967386dfae624cd237562a34a68471
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5956
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11 19:43:46 +02:00
Vladimir Serbinenko 49c3045c2d ibexpeak: Remove some dead code.
Change-Id: I68ae49d20a2524f03c4503f2b3be93f07b9cb6e3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5955
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11 19:43:36 +02:00
Mike Loptien c93a75a5ab AMD/CIMx: Add functions for AMD PCI IRQ routing
The PCI_INTR table is an Index/Data pair of I/O ports
0xC00 and 0xC01.  This table is responsible for physically
routing IRQs to the PIC and IOAPIC.  The settings given
in this table are chipset and mainboard dependent, so the
table values will reside in the mainboard.c file. This
allows for a system to uniquely set its IRQ routing.
The function to write the PCI_INTR table resides in
cimx_util.c because the indices into the table have
the same definitions for all SBx00 FCH chipsets.

The next piece is a function that will read the PCI_INTR
table and program the INT_LINE and INT_PIN registers in
PCI config space appropriately.  This function will read
a devices' INT_PIN register, which is always hardcoded to
a value if it uses hardware interrupts.  It then uses this
value, along with the device and function numbers to
determine an index into the PCI_INTR table.  It will read
the table and program the corresponding value into the PCI
config space register 0x3C, INT_LINE.  Finally, it will set
this IRQ number to LEVEL_TRIGGERED on the PIC because it is
a PCI device interrupt and the must be level triggered.

For example, the SB800 USB EHCI device 0:18.2 has an INT_PIN
value hardcoded to 2.  This corresponds to PIN B.  On the
Persimmon mainboard, I want the USB device to use IRQ 11.  I
will program the PCI_INTR table at index 0x31 (this USB device
index) to 11.  This function will then read the INT_PIN register,
read the PCI_INTR table, and then program the INT_LINE register
with the value it read.  It will then set the IRQ on the PIC to
LEVEL_TRIGGERED by writing a 1 to I/O port 0x4D1 at bit position 4.

Also, the SB700 has slightly different register definitions than
the newer SB800 and SB900 so it needs its own set of #defines for
the pci_intr registers.

Only the Persimmon mainboard is adapted to this change as an
example for other mainboards.

Change-Id: I6de858289a17fa1e1abacf6328ea5099be74b1d6
Signed-off-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/5877
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-11 17:07:50 +02:00
Mike Loptien ce740c474c PIC i8259: Move #defines and functions to i8259.h
The PIC i8259.c file has a lot of #defines and function
definitions in it.  I am moving these to the i8259.h file
and also adding a few functions to update the PIC IRQ mask
register.  The PIC default configuration has all of its
interrupts masked off except for IRQ2.  IRQ2 is where
the Slave PIC is cascaded from the Master PIC.

Change-Id: I78d505358c29fadbc184137a09120863ea1d5c13
Signed-off-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/5950
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-11 17:07:38 +02:00
Kyösti Mälkki f5a2d2607f lippert/toucan-af: Fix comment on HAVE_ACPI_RESUME
S3 resume is expected to work now, however the 3s delay and flash wear
is still there.

Change-Id: I7edbce7bcf9c2160099fd5e371562b1ec63d45d8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5971
Tested-by: build bot (Jenkins)
Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-11 15:52:45 +02:00
Kyösti Mälkki 1b6aef754e lippert/frontrunner-af: Fix comment on HAVE_ACPI_RESUME
S3 resume now works, however the 3s delay and flash wear is still there.

Change-Id: I9d2eda5454baf7704807cf67f3aca94a67de3406
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5970
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
2014-06-11 15:52:35 +02:00
Dave Frodin 8ef20cf922 amd/hudson: Add the IOAPIC space to the fixed resources table
Without this change the IOAPIC memory window would collide
with PCI config space. This was tested on the hp/abm board.

Change-Id: I5dd53463961f75bab80a41dc7beff8d0434b24ae
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5946
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11 15:05:48 +02:00
Dave Frodin bccd408169 amd/family16kb: Move and resize the MMIO region
The Kabini MMIO region was assigned a 256MB region at
0xA0000000. That location is below TOP_MEM and is getting
carved out of useable system memory which is not being
reclaimed above 4GB. This changes its size to 64MB and
moves it to 0xF8000000.

This was tested on the hp/abm and asrock/imb-a180 boards.

Change-Id: Ib226bc954311a3a2a15f182ab4618f4924e95a5b
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5945
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11 15:05:01 +02:00
Damien Zammit 601da481b5 util/inteltool: Add pci ids for 4 northbridge models instead of 1.
This patch supports northbridges: 0x0150 0x0154 0x0158 0x015c as 3rd gen core.
Tested on 0x0150 (0x0154 previously only model).

Change-Id: I53a33d864494dd4ac1cb9e8330450f56001ed92c
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/5873
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-11 03:05:01 +02:00
Dave Frodin 0240f9492b nuvoton/nct5104d: Update the #defined LDNs
Change-Id: I4e4bc09a8f8fabe68519a29dc421af82c76c9873
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5944
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-09 23:33:22 +02:00
Felix Held da09d02c57 superio/nuvoton: factor out generic romstage components
The romstage of Nuvoton Super I/O chips (but not Nuvoton BMC chips)
is identical, so the early_serial.c file can be moved under
nuvoton/common.
The Nuvoton BMC chip WPCM450 is however left untouched.

Change-Id: I4663176c1003b24a49a9fe5f9ebd27a1963b5565
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/5909
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-06-06 23:05:42 +02:00
Kyösti Mälkki ef9343cac1 AGESA: Use common heap allocator
Change-Id: I5df1f0efdef2592b762fe391edaadbca4593e85a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5689
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06 13:31:31 +02:00
Kyösti Mälkki 6025efa347 AGESA: Use common GetBiosCallout()
Change-Id: I9c8f7cc98c65102486e17ec49fa2246211dffc4f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5688
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06 13:30:52 +02:00
Kyösti Mälkki 83cc3b0ed5 AGESA fam15tn fam16kb: Use shared default callouts
Change-Id: Ibbb07ef308c7e92a8a8dfe066f5e3866d5f8aee2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5687
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06 13:30:38 +02:00
Kyösti Mälkki cb989f2c3c AGESA fam15tn fam16kb: Use common handler for GNB_GFX_GET_VBIOS_IMAGE
Change-Id: I158993bcb654ef27a9fc6b7e9dc3fc955fb740fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5686
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06 13:30:24 +02:00
Kyösti Mälkki bc84450082 Drop unused change_i2c_mux()
Change-Id: I3ac39441746d739ac19e831bb67c76405c24ba27
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5925
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-06 07:30:23 +02:00
Edward O'Callaghan f5bde44df2 superio/smsc/kbc1100: Virtually rewrite support and fix mainboards
1. Remove #include .c in romstage.
2. Make romstage component symbols linker-time.
3. Provide header guards and prototypes in superio romstage support.
4. Correct function type-signatures to be static/non-static where
appropriate, avoid 'pretend optimisations' by unnecessarily inlining
functions.
5. Separate out UART enable from various other PNP hard coding

Change-Id: I9b8dad7c02d802e97db73ddf2913d5c6bb33a419
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5916
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-06 01:46:19 +02:00
Edward O'Callaghan 4ba8ba4654 build: Drop libgcc runtime wrapper in Clang builds
This GCC specific workaround of wrapping of libgcc runtime symbols with
gcc.c is not nessary with libcompiler-rt linkage.

Change-Id: I50a2bc99d97f68a2ad2b51a92ea0e7086bab35fe
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5812
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-06 01:45:20 +02:00
Edward O'Callaghan fdceb48b36 superio/smsc/smscsuperio: Make romstage linkable with header
Rewrite smsc/smscsuperio romstage component to be more consistent and
provide header there-by removing #include's of early_serial.c's in
mainboard's.

Change-Id: I572e0c76422f09d4de88935a36c0a59e5350e6e0
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5915
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03 09:37:57 +02:00
Edward O'Callaghan 8f45761a67 superio/ite/it8661f: Make early_serial into romstage sym
Following similar reasoning as commit:
d304331 superio/fintek/f81865f: Avoid .c includes

Avoid any mistaken future inclusion of early_serial.c in mainboard.c
code by providing symbols in romstage.

Change-Id: I9e763a7ad9de090e35acdcf4d6a280d8227c6015
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5508
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03 09:37:03 +02:00
Edward O'Callaghan 6fb379a1db mainboard: Remove #include early_serial.c from w83977tf boards
These non-ROMCC boards #include the model specific w83977tf Super I/O
romstage component. The generic winbond_early_serial() function serves
well here to further tighten integration into the new Super I/O
framework and drop dependence on #include'ing .c files, leaving only
ROMCC boards.

Change-Id: Ib63c0f29f994c54e6112702506f288535799706c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5898
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03 09:36:33 +02:00
Edward O'Callaghan aef5594f74 superio/ite/it8772f: Depreciate early wdt functions
We have better written generic implementations of these functions
introduced in commit:

 a7d14a1 ite/common: Introduce common watchdog and 3.3V VSB helpers

Change-Id: Ic93d78fce18c68d1d1bf3b537e8985a2532a8fcf
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5901
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03 09:35:50 +02:00
Edward O'Callaghan 1b3acb13e4 superio/ite/it8772f: Move towards removing #include .c
Move samsung/stumpy board towards generic romstage component and away
from poorly written hard-coded model specific Super I/O component. This
is an incremental step towards getting obj-level abstraction between
board and Super I/O.

Change-Id: I358c5abef85c2ffa1b7178025cde8834a35b0a51
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5899
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03 09:35:38 +02:00
Paul Menzel d235da108b northbridge/intel/i945/gma.c: Add and use defines for `GMADR` and `GTTADR`
Change-Id: I0f39b35fbf8e053ba21454a2847d6bb3ac5d2e1c
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5923
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03 09:34:50 +02:00
Paul Menzel 50684638be northbridge/intel/i945/i945.h: Move define `BSM` to section D2F0
The Base of Stolen Memory (BSM) register belongs to device 2,
function 0.

Change-Id: I2381f87ffaccb2f8034c160fc30c1d92f8b19402
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5922
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03 09:32:50 +02:00
Vladimir Serbinenko 12fcb86bba sandybridge: Pass chip info to i915lightup.
Change-Id: I280441aadb0575dc0b99584cdcd48cc76a0289a2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5284
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-02 21:47:39 +02:00
Kyösti Mälkki fd2501b3f1 i945: Fix TSEG size allocation for get_top_of_ram()
Seems boards with i945 had TSEG disabled so this had gone unnoticed.

Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Change-Id: I6a00ea9121847ce2fede22538e1b53a870d761f1
Reviewed-on: http://review.coreboot.org/5892
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-06-02 10:51:30 +02:00
Kyösti Mälkki 15935ebe24 i945: Fix resource bases for UMA and TSEG
TSEG appears in memory below graphics UMA region. Seems boards
with i945 had TSEG disabled, so the incorrect order did not make
a difference.

Change-Id: Ie293aab17b60b5f06a871a773cd42577c7dc7c7b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5891
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-06-02 10:50:49 +02:00
Edward O'Callaghan 9c65978f38 mainboard/ibase/mb899: Trivial, Non-local header treated as local
Change-Id: I5cb496d0d582d3dc5c0c0635f632561f8a3dd853
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5897
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-01 13:35:24 +02:00
Edward O'Callaghan a34a1da44d northbridge/intel/i945/i945.h: Trivial, fixup header guards
Change-Id: Iff15ab436e5b7b4e189c7341e7c508faaef07a3a
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5896
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-01 13:34:47 +02:00
Vladimir Serbinenko ee62164bb2 lenovo/x201: Fix order of SPI init.
The lock bit for UVSVC/LVSVC was set before both registers were programmed.

Change-Id: I000440db5c8dd2f260ebc1b69108b75621faf7b3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5167
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01 11:11:26 +02:00
Vladimir Serbinenko 25b55f3d1c lenovo/t60: Implement intel VGA callbacks.
Without it option ROM run results in just a black screen.

Change-Id: Id203f55ca0f02c290a3f40ac1ec7c5f23c5580bf
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5344
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01 02:16:25 +02:00
Vladimir Serbinenko 63acd22dc5 lenovo: Make version look like something thinkpad_acpi would accept
thinkpad_acpi checks that BIOS version matches some pattern.
Report version in this form.

Not cleaned up as the idea of this patch seems to be met with resistance.
Can make it Thinkpad-specific if the idea is accepted.

Change-Id: I15e33e87e7a7f42d6a06f12fb39b5172153af8a1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4650
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01 01:58:47 +02:00
Vladimir Serbinenko 4c81a9e142 i915_reg: Declare LVDS register values.
Change-Id: If8b3578c4fa31bf9f09c0053a5cac7ebc993b634
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5319
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01 01:57:12 +02:00
Vladimir Serbinenko 8ecdc9e877 acpigen: Add acpigen_emit_eisaid.
Change-Id: Ib92142a133445018cd152dabe299792ba5f36548
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5240
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01 01:24:53 +02:00
Paul Menzel 4b10bb7c80 util/board_status/board_status.sh: Move `cbfs.txt` to results directory
Commit 40e936a1 [1]

    util/board_status/board_status.sh: Save ROM contents in `cbfs.txt`

creates `cbfs.txt` in `${tmpdir}` but does not move it to the results
directory `${tmpdir}/${results}`. So move it to the correct place.

[1] http://review.coreboot.org/5867

Change-Id: Ibca691ccf72b56b6271a611d92deaed7d377773b
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5883
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-05-31 21:21:01 +02:00
Edward O'Callaghan 32da8d900e superio/nsc/pc87309: Avoid .c includes in mainboard
Make superio romstage component link-time symbols.

Change-Id: Icde27465a05946498ff7b8f1aaa7a9e8ba074272
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5880
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31 21:18:05 +02:00
Edward O'Callaghan beb0f2631f superio/winbond/w83627hf: Avoid .c includes in mainboards
Move towards the removal of the superio model specific xxx_serial_enable
implementation. Make remaining superio romstage parts link-time symbols
and fix corresponding mainboards to match.

The following mainboards remain unconverted as they are ROMCC:
 - mainboard/supermicro/x6dai_g
 - mainboard/supermicro/x6dhe_g
 - mainboard/supermicro/x6dhr_ig
 - mainboard/supermicro/x6dhr_ig2
and so block the final removal of w83627hf_serial_enable().

Special cases:
 - mainboard/supermicro/h8qme_fam10: Provide local pnp_ sio func
Provide local superio pnp_ programming entry/exit functions as to avoid
making superio implementation global symbols. Although this is not the
proper/final solution, it does mitigate possible symbol collisions and
allow for continued superio refactorisation.

Change-Id: Iaefb25d77512503050cb38313ca90855ebb538ad
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5601
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31 21:17:37 +02:00
Edward O'Callaghan 9068788a8f superio/winbond/w83627ehg: Depreciate romstage component
Part 1/2: These are actually not necessary if Super I/O support is
properly utilized.

Change-Id: I39b621e582f8d0762276d29492c91dce500f0665
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5870
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31 21:16:39 +02:00
Kyösti Mälkki 3c3e34d69f i945: Use defines for DEVEN
Change-Id: I32461449354155510c0e14e9d0ce396068ea50d4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5890
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-05-31 14:33:43 +02:00
Paul Menzel 66f10b1a19 northbridge/intel/i945/northbridge.c: Use define `TOLUD` instead of hardcoded value
Change-Id: I4739c5544aade105399347d239ba64f5115db397
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5869
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31 13:11:02 +02:00
Paul Menzel 355ce38dc2 northbridge/intel/i945: Add define for register `BSM` and use it
Add a define for the register Base of Stolen Memory (BSM) and use it.

Change-Id: I5b1df4e088d88344fac8cd8d218e76b08a885f58
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5884
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31 11:12:32 +02:00
Martin Roth ae6e0c6beb cpu/intel/fsp_model_206ax: change realpath to readlink
realpath and readlink can be used to do the same thing - in this case
we're turning path1/path2/../path3/path4 into path1/path3/path4 so
that the makefile's wildcard routine can evaluate it.

Debian derivatives don't seem to include realpath. (and even when it's
installed, it's not the gnu coreutils version.)

Change-Id: I0a80a1d9b563810bdf96aea9d5de79ce1cea457a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5793
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
2014-05-30 23:52:17 +02:00