Qualcomm CRD devices do not have a fingerprint sensor so removing the
QUP configuration for it. This QUP also coincidentally is the same as
the one used for the TPM, so this initially was also causing TPM
communication issues during bootup as the QUP was being reconfigured
during the later stages after QcLib execution.
BUG=b:206581077
BRANCH=None
TEST=Boot to kernel without any CR50 communication errors
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I8d13b67796b70b0b7e9a4721cca0b8a54b2b27c1
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61716
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ADL supports 8B Bank Architecture, whereas Sabrina supports either BG or
16B Bank Architectures depending on the speed. This influences SDRAM
Density and Banks, SDRAM Addressing bytes in SPD. Encode them as per the
individual SoC advisories.
BUG=b:211510456
TEST=Generate SPDs for Sabrina.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ic854ccccb2b301e75d0f28cd36daf87fd41e07e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
ADL and Sabrina provide different advisories to encode Optional SDRAM
features (byte indices 7 & 9). Encode those bytes as per the respective
advisories.
BUG=b:211510456
TEST=Generate the SPD binaries for Sabrina.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Icac8ae148458162768a919d9690d7bf96734e6c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This patch corrects the DQ mapping and enable ECT. In Vell design,
the DQS is swapped in Mc0.ch1, Mc0.ch3, Mc1.ch0, Mc1.ch1 and Mc1.ch2
but the DQ mappings are not swapped and that causes ECT training
failure.
BUT=b:208719081
TEST=emerge-brya coreboot chromeos-bootimage && ensure the system
passes ECT training and all the way booting to the OS.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Idd2ad16151f0b2b93b00295b75a66ba65cba23cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The and-mask passed to the gpio_update32 call needs all 32 bits to be
set to ones. When building as 32 bit binary the -1UL will result in the
needed bit mask, but for a 64 bit build the constant would have 64 bits
set to ones which then gets truncated to 32 bits causing a compiler
error. Use 0xffffffff as bit mask instead which behaves correctly in
both cases and also clarifies what this is doing.
TEST=Timeless build for Chausie results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0b6a50bd914fdbb7a78885efb6c610715e2d26c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62053
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aamir Bohra <aamirbohra@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This fixes a build failure when trying to build the code in 64 bit mode.
TEST=Timeless build for Chausie results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If8fe7b626d9d72c0b8ed07ced93e46f795e36848
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamirbohra@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Clang does not seem to work with 'fall through' in comments.
Change-Id: Idcbe373be33ef7247548f856bfaba7ceb7f749b5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The google/agah variant will use a peripheral that will require the use
of the PCIe Resizable BAR feature from the PCIe spec. Thus, select
the new Kconfig option to enable it. The appropriate Resizable BAR size
will be updated later.
BUG=b:214443809
TEST=build
Change-Id: I9cf86ba3160ae5018655b5d366e89f4273b30b94
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Section 7.8.6 of the PCIe spec (rev 4) indicates that some devices can
indicates support for "Resizable BARs" via a PCIe extended capability.
When support this capability is indicated by the device, the size of
each BAR is determined in a different way than the normal "moving
bits" method. Instead, a pair of capability and control registers is
allocated in config space for each BAR, which can be used to both
indicate the different sizes the device is capable of supporting for
the BAR (powers-of-2 number of bits from 20 [1 MiB] to 63 [8 EiB]), and
to also inform the device of the size that the allocator actually
reserved for the MMIO range.
This patch adds a Kconfig for a mainboard to select if it knows that it
will have a device that requires this support during PCI enumeration.
If so, there is a corresponding Kconfig to indicate the maximum number
of bits of address space to hand out to devices this way (again, limited
by what devices can support and each individual system may want to
support, but just like above, this number can range from 20 to 63) If
the device can support more bits than this Kconfig, the resource request
is truncated to the number indicated by this Kconfig.
BUG=b:214443809
TEST=compile (device with this capability not available yet),
also verify that no changes are seen in resource allocation for
google/brya0 before and after this change.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I14fcbe0ef09fdc7f6061bcf7439d1160d3bc4abf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Change to use i2c/generic to match ELAN FW update script.
BUG=b:210970640
TEST=emerge-draco coreboot chromeos-bootimage
Change-Id: Ib416da6000d9e99f9c37cf497fb1c43e3fca0220
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add PSP command to send SPL fuse command if PSP indicates SPL fusing
is required. Also add Kconfig option to enable sending message.
BUG=b:180701885
TEST=On a platform that supports SPL fusing. Build an image with an SPL
table indicating fusing is required, confirm that PSP indicates fusing
required and coreboot sends the appropriate command. A message indicating
PSP requested fusing will appear in the log: "PSP: Fuse SPL requested"
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Change-Id: If0575356a7c6172e2e0f2eaf9d1a6706468fe92d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Add an option to build skiboot as a payload. This makes QEMU Power9
board simpler to use as skiboot is necessary anyway.
Change-Id: I0b49ea7464c97cc2ff0d5030629deed549851372
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Alder Lake M/N ESPI ID 18 was incorrectly assigned to be 0x5482. Assign
it to the correct value.
Reference documents: 619501, 645548.
Change-Id: I08bd218fd128497825b96aa5b9496826afa620d2
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61947
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Follow latest schematic to update the DQ map.
BUG=b:218939997
TEST=boot into OS without issue.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If29cc22b1749fb5d602d3ce64bcc1182593d673f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
To get verbose MRC log includes RMT log, we need to set
FSP_LOG_LEVEL_ERR_WARN_INFO instead.
TEST=tested on gimble, see MRC verbose and RMT log are printed
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Change-Id: I3896f0482dfde090b4e087490b7937683b5de091
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Disconnect all GPIO's that aren't connected to anything.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2050da62f73c0f99fbfef013c22e35225cc480c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Add comment for each GPIO details its endpoint based
on the schematic.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia3678274dcd52285019fb3cf8ccd22617268ce1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Currently, the settings from CMOS were written to the
EC, which was pointless.
Now, when suspending, the EC values are stored in CMOS
when suspending and subsequently restored when waking.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I998d5509cd5e95736468f88663a1423217cf6ddf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
HECI stuff is in the southbridge, so put the code in there. Rename the
file to match the name of the function it provides.
Change-Id: I71de1234547dbd46a9b4959c619d2ae194da620a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Remove all northbridge dependencies in the `setup_heci_uma()` function.
Update its signature to not pull in raminit internals and drop a dummy
read that doesn't have any side-effects (it's probably a leftover from
a replay of vendor firmware). This code will be moved into southbridge
scope in a follow-up.
Change-Id: Ie5b5c5f374e19512c5568ee8a292a82e146e67ad
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Remove the temporary `raminit_heci.c` include and make it a proper
compilation unit. Export the `setup_heci_uma()` function.
Change-Id: Ia6782a0cb5e731d58764d0fa4ee256bfc8cef98a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Move HECI code out of raminit.c into a separate raminit_heci.c file. To
preserve reproducibility, use a temporary .c include. This will be gone
in a follow-up.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I240552c9628f613fcfa8d2dd09b8e59c87df6019
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Commit 0e688b113d (arch/x86/id.S: Fix
building with clang) broke building with GCC 8.3 so this approach
should work for both GCC 8.3 and clang. The clang error is:
CC bootblock/arch/x86/id.o
/tmp/id-35b17a.s:35:7: error: expected relocatable expression
.long - ver
^
/tmp/id-35b17a.s:36:7: error: expected relocatable expression
.long - vendor
^
/tmp/id-35b17a.s:37:7: error: expected relocatable expression
.long - part
^
Change-Id: Ide3d313800641d4d9b5f79127f84d9fdb4ec2b96
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
This reverts commit 0e688b113d.
Reason for revert: Breaks building with GCC 8.3 which is currently
needed to build bootable coreboot images for Ironlake boards:
src/arch/x86/id.S: Assembler messages:
src/arch/x86/id.S:14: Error: value of 4294967344 too large for field of 4 bytes at 48
src/arch/x86/id.S:15: Error: value of 4294967327 too large for field of 4 bytes at 52
src/arch/x86/id.S:16: Error: value of 4294967318 too large for field of 4 bytes at 56
Change-Id: I9e13b15c062bc6598717382b1fedfa120c6d7209
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The SPI ROM REQ/GNT pins are used in systems where the EC and the APU
share one flash chip to make sure that not both devices will try to
access the flash at the same time. The firmware running before the x86
cores are released from reset has likely already done this, but do it
again in bootblock just to be sure. The KBRST_L pin can be used to reset
the APU from the EC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5af285ac222ed6625f498d82360f2d1cc522df2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change is mostly from CB:56644 patchset 3.
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idece950bab260a099c9790485805cbe8ea641666
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change is mostly from CB:56644 patchset 3.
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4cb9bbb3d7fd5d7c9e33fbf656301c0beb2f1b47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change is mostly from CB:56644 patchset 3.
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idcee9de9bc409a4dfe7d2f8c18ec5132f2747c33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add PCI IDs for Tiger Lake LP and Tiger Lake H devices and their GPIO
tables.
TEST: dump GPIOs on i5-1135G7, Tiger Lake H untested
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6071a999be9e8a372997db0369218f297e579d08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Commit 805956bce [soc/intel/cnl: Use Kconfig to disable HECI1]
moved HECI1 disablement out of mainboard devicetree and into SoC Kconfig,
but in doing so inadvertently disabled HECI1 for Puff-based boards which
previously had HECI1 enabled by default. To correct this, move the Kconfig
selection back into the mainboard Kconfig, and set defaults to match values
prior to refactoring in 805956bce.
Test: run menuconfig for boards google/{drallion,hatch,puff,sarien} and
ensure Disable HECI1 option defaults to selected for all except Puff.
Change-Id: Idf7001fb8b0dd94677cf2b5527a61b7a29679492
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Commit d6dbd933 [soc/intel/cannonlake: Use SBI msg to disable HECI1]
switched CNL-based mainboards from using FSP for HECI disablement to SBI
msg, but this causes google/hatch to hang when attempting to unhide p2sb
as part of disabling HECI1 via SBI during SMM, so switch to using
PMC/IPC method. SOC_INTEL_WHISKEYLAKE and SOC_INTEL_COFFEELAKE do not
support PMC disablement method, so they remain using SBI.
Test: build/boot google/hatch, verify HECI1 disabled via console log and
lspci in booted OS.
Change-Id: I06f0eb312b579af4a0fe826403374dcd99689d21
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61882
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Move cse_disable_mei_devices() from cse_eop.c into heci_disable.c,
so that platforms needing to use heci1_disable_using_pmc() can do so
without requiring cse_eop.c be unnecessarily compiled in as well.
This will allow Cannon Lake platforms to use PMC to disable HECI1 instead
of SBI, which is currently causing a hang on google/hatch (and will be
changed in a follow-on patch).
Test: build test google/{ampton,drobit,eve,akemi} boards to ensure no breakage.
Change-Id: Iee6aff570aa4465ced6ffe2968412bcbb5ff3a8d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The address space allotted to MCRS in the northbridge needs to be exclusive
of the address space allotted to the GPIO controllers in the southbridge,
otherwise Windows complains of overlapping resource ranges and disables
the GPIO controllers. To prevent overlap, use CONFIG_PCR_BASE_ADDRESS
to set the upper bound of MCRS rather than MMCONF.
Test: boot Windows 10/11 on google/{reef,ampton} and verify that
GPIO controllers are indicated as without fault in Device Manager.
Change-Id: I2117054edb448e717b7cbe80958c9c4e6c996e2b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: CoolStar Organization <coolstarorganization@gmail.com>
This patch creates a global function `cse_send_end_of_post()` so
that IA common code may get access to this function for sending EOP
command to the HECI1/CSE device.
Additionally, use static variable to track and prevent sending EOP
command more than once in boot flow.
BUG=b:211954778
TEST=Able to build and boot Brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I837c5723eca766d21b191b98e39eb52889498bfc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
This patch implements the required operations to perform prior to
booting to OS using coreboot native driver when platform decides
to skip FSP notify APIs, i.e., Ready to Boot and End Of Firmware.
Additionally, move the PMCON status bit clear operation to `.final` ops
to cover any such chances where FSP-S Notify Phase or any other later
boot stage may request a global reset and PMCON status bit remains set.
BUG=b:211954778
TEST=Able to build brya with these changes.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0a0b869849d5d8c76031b8999f3d28817ac69247
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This patch adds an SoC function to clear GEN_PMCON_A status bits to
align with other IA coreboot implementations.
BUG=b:211954778
TEST=None.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I22650f539a1646f93f2c6494cbf54b8ca785d6ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Fred Reitberger