Since all the `subsystemid` lines in these devicetrees use the same
values, factor them out via inheritance.
There are some exceptions though. There are some enabled devices which
lack a `subsystemid` entry. Looks like HP uses the same subsystem ID
on every device, so assume that these devices should also use that
subsystem ID as well.
While we are at it, tidy up all the now-empty device blocks.
Change-Id: Iccd74fff9456e1204735a80ecc4f7685624cb78e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38081
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
'Status' is assigned a value three times before it is checked.
Remove the first two assignments.
Change-Id: Id7136d62b4dbd6dce877983467960373b3a7ac22
Signed-off-by: Joe Moore <awokd@danwin1210.me>
Found-by: Coverity CID 1241809
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Enable COM2 port on SuperIO if UART index is 1. This change allows
to use full RS232 COM1 port for different purposes when COM2 is selected
as main port.
TEST=flash coreboot with console on COM2 and observer output with UBS-TTL
converter connected to COM2 header on PC Engines apu1
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I1e72c5a43a302658f86dafd863e5a67580eae3e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
While we are at it, also:
- Rename related variables to match the register names.
- Update some comments to better reflect what some registers are about.
- Add various FIXME comments on registers that seem to be used wrongly.
With BUILD_TIMELESS=1, this commit does not change the coreboot build of:
- Asus P8H61-M PRO with native raminit.
- Gigabyte GA-H61MA-D3V with native raminit.
- Lenovo Thinkpad X230 with native raminit.
- Lenovo Thinkpad X220 with MRC raminit.
Change-Id: I5e5fe56eaa90842dbbdd1bfbbcb7709237b4c486
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The SDIO device is disabled so remove it from the devicetree.
BUG=N/A
TEST=build
Change-Id: I6497f6134d8fc001bf4cb7e348ae00077aa34814
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38129
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The HDA controller was disabled because no codec exists on the board.
However, this also disabled audio over HDMI.
To correct this, enable Azalia and the HDA controller in the devicetree.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: I7be2c29151dc9d6c247c3332fb9adfb34449c703
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Incorrect values read from a different memory region will cause
incorrect computations. VceFlags array size should be 4 based on
similar code in f15 branch, and because
f16kb/Proc/GNB/Modules/GnbInitKB/GnbF1TableKB.c only loads
4 values for VceFlags in DefaultPpF1ArrayKB. Leaving it at 5
results in an out-of-bounds read of PP_FUSE_ARRAY_V2_fld16
in line 901 of
f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxPwrPlayTable.c
when Index reaches 4.
Change-Id: I0242c0634e66616018e6df04ac6f1505b82a630f
Signed-off-by: Joe Moore <awokd@danwin1210.me>
Found-by: Coverity CID 1241878
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38056
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The RW_MRC_CACHE was not included in a UNIFIED_MRC_CACHE region which is
expected by some parts of the code.
Add the UNIFIED_MRC_CACHE and include the RW_MRC_CACHE in this region.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: I1654ca210dc2a8e976d698fd8330641da23e8380
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Even if they were corrected, they just rephrase the code.
Change-Id: Iebc4e8c9eb0f44f84acf532ad12a5d064075a102
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The check to validate if the logo file was loaded correctly was
incorrect.
Now check the actual logo size.
BUG=N/A
TEST=build
Change-Id: Ib3a808dd831986e8347512892ee88983d376d34c
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38124
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The check to validate if the logo file was loaded correctly was
incorrect.
Now check the actual logo size.
BUG=N/A
TEST=build
Change-Id: I4df2076b2f0cc371848a912c622268dfec24e2ef
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
DRAM calibration sets vcore to different voltages at different
frequencies. After DRAM calibration, vcore should be restored to the
default voltage, which is 800mV for both eMCP and discrete DDR devices.
BRANCH=kukui
BUG=b:146618163
TEST=bootup pass
Change-Id: Ia87b4ac78a32dbd4c4ab52e84d307cb46525afa1
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
For timestamps added before CBMEM coming online and call to
timestamp_sync_cache_to_cbmem(), ts_table->base_time was
subtracted twice. The second time though, the value of zero
was subtracted.
Make the stamps logged on the console relative to base_time too,
such that cbmem -1 and cbmem -c outputs will match.
Remove comments about postponing initialisation of timestamps
to ramstage, that does not happen anymore.
Change-Id: Ia786c12c68c8921c0d09bc58a29fefdc72bf0c6d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
As logging is guarded by Kconfig, increase the level from BIOS_SPEW
to BIOS_INFO.
The original callsite inside timestamp_add_table_entry() was also
called when syncing from timestamps from .bss to CBMEM. We should
not reprint the values then.
Change-Id: I72ca4b6a04d8734c141a04e651fc8c23932b1f23
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
As on most other boards, use tabs to indent the devicetree.
Change-Id: I1d2fd6e758a3b2dccb8fc43d425f4520fd2e544f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38075
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use subsystemid inheritance, which results in a much more compact
devicetree. In addition, align and correct various comments.
Change-Id: Iafce736691b62ae8f359c2d74f8bd3549493029a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Use lowercase for hex constants, remove registers that default to zero
already and drop outdated comment about AHCI mode.
Change-Id: I6833462ea11e988eaab7913cf98853cebe4c7a9f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
They default to zero already. Moreover, the comment about AHCI mode no
longer applies, as it was made the default mode.
Change-Id: Ife99a79df0289c6db87510ed917438bf47b7f6ca
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Replace a bunch of spaces with tabs, put host bridge and friends above
southbridge, fix "TPM Module" (Trusted Platform Module Module) and add
some empty lines to help the reader.
Change-Id: I3a89893f943057ef7a4f973eaa65dba259e8a49d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This comment seems to have been copied off some QEMU board. As it would
not apply to any veyron variant, drop it.
Change-Id: I70a2923520f5c59ae31d149920cf4b096e5a11d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Use a consistent spelling for SoC (System-on-a-Chip), and fix a few
minor typos.
Change-Id: I29eacc9e93b2eb686ce945de0173844ef5eae1b9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
In order to provide more consistent probing in future refactorings, pull out
the release from deep sleep path in STMicro's SPI flash probing function.
Call that function explicitly when RDID doesn't return anything at all.
The old STMicro parts, even if supporting RDID, won't decode that
instruction while in a deep power down state. Instead of re-issuing RDID after
the successful wake assume the id fixup is valid.
Change-Id: I46c47abcfb1376c1c3ce772f6f232857b8c54202
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Also change some of the types to match the register widths
of the controller. It is expected that these prototypes
will be used with SMBus host controllers inside AMD chipsets
as well, thus the change of location.
Change-Id: I88fe834f3eee7b7bfeff02f91a1c25bb5aee9b65
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38226
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On Intel, accessing the SMBus register banks can be done via
IO and, since at least ICH10, via MMIO. We may want to use the
latter in the future.
Change-Id: I67fcbc7b6f6be61c93bc608e556a577ef9e52325
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Patrick Rudolph