Add reset delay in power resource to prevent from failing to bind after
unbinding. And boards including yorp series - bobba / phaser and bip series
- ampton are affected.
BUG=b:121286833
BUG=b:117474421
BUG=b:121019320
BRANCH=None
TEST=emerge-octopus coreboot,
verified that WACOM touchscreen can re-bind successfully.
Change-Id: Icf690fc8e9450d559b642d1c88e29ff5d52c5488
Signed-off-by: Marco Chen <marcochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Set PchCnvimode to Auto if CNVi is enabled in device tree. This will
allow FSP to configure CNVi.
Change-Id: I4f77fe5e9f561d3b498403e42dfc7afdcfaedf6f
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/30516
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Correcting order of display related GPIOs and also adding not connected
pin definitions for display GPIOs
BUG=b:120914069
BRANCH=none
TEST=check if code compiles with changes.
Change-Id: I9498284d263516f65513d6395883b6b09dd70fd5
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/30544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
This patch enables the SATA for hatch,
* Enable the SATA port 1.
* Configure the GPIO for SATA.
BUG=b:120914069
BRANCH=none
TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot.
Change-Id: Iaf800d1531688c3d3b82600038ea1d7160ae4b0b
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/30435
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The feature is used to enable PCI MMIO accesses behind
PCIe links (or bridges) before PCI enumeration has been
completed.
Add the feature for bootblock, verstage and postcar, it
is required with add-on PCIe serial cards for early
console output. It's up to the board specific code to
configure PCIe root port prior to calling console_init()
for this to work.
Remove feature from ramstage, it bypasses any resource
allocations and bus number assignments.
For the moment PCI configuration support before ramstage
is available only on ARCH_X86.
Also switch from device_t to pci_devfn_t.
Change-Id: I08acec68b6f17f4d73d30039cc41274492ea4f45
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add symbols for the non C_ENVIRONMENT_BOOTBLOCK builds
and use them for stack guards.
Change-Id: Ib622eacb161d9a110d35a7d6979d1b601503b6f4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The same file was replicated three times for certain
soc/intel bootblocks, yet there are no indications or need to do
chipset-specific initialisation.
There is no harm in storing the TSC values in MMX registers
even when they would not be used.
Change-Id: Iec6fa0889f5887effca1d99ef830d383fb733648
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Platforms with SSE=y or SSE2=y will invoke romcc with -mcpu=k7.
This implicitly enabled romcc to consume MMX registers, if XMM
set was consumed first.
Explicitly tell romcc not to clobber MMX set.
Change-Id: I37f1d6ea01873036712dfbb32bb1dcd5d769e85d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This board runs well with coreboot. The documentation part of this
commit lists what works and what doesn't.
Tested with GRUB 2.02 as a payload, loading SeaBIOS 1.12.0 which then
boots FreeBSD 11.2. It has also been tested with GRUB directly booting
Debian GNU/Linux 9.6 (kernel 4.9).
Change-Id: I291573d4651bdffe24eb841033ea6189fcbf8502
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The function pch_log_state() was overlooked when making the smi
relocation code common.
Change-Id: I878772f1a93105b828e50f37e105d04988ba0bdf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Processor graphics is disabled on, for example, the C222 and C224
chipsets.
The change to resource assignment in northbridge.c prevents the following
warning that occurs when the IGD is disabled:
> skipping PCI: 00:00.0@3 fixed resource, size=0!
Tested on a Supermicro X10SLM+-F, which has the IGD disabled by the
chipset. The graphics memory is reclaimed and no issues were observed.
Also tested on an ASRock H81M-HDS. This board has an IGD, but no
regressions were observed.
Change-Id: I86d4aef50b6588f08b86c9758a4b95ccd65e9a96
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The existing code sets DEVEN with the intention of enabling the IGD and
Mini-HD audio. However, according to the datasheet [1] and some testing
on hardware, the bits in DEVEN are set by default if and only if the
straps/fuses say the device should be enabled. To illustrate this, here
are a few initial values of DEVEN on some Haswell systems:
Supermicro X10SLM+-F: 0x0000002d
ASRock H81M-HDS: 0x00000039
Acer C720: 0x000000b1
On the X10SLM+-F, the IGD is disabled by default, and PEG10 & PEG11
are enabled by default. On the C720, the PEG devices are all disabled
by default, while the IGD and Mini-HD audio are already enabled.
There are two issues that result from the existing behaviour: PEG
devices are unconditionally disabled, and devices are set as enabled
when it's not actually possible to enable them.
So, don't touch the DEVEN register at this stage, as there are no
benefits.
Interestingly, on an Acer C720 (Google Peppy), a PCI device 00:04.0
appears. It is a thermal sensor. `powerstat` was used to measure idle
power usage over 30 minutes under Debian GNU/Linux 9.6. There was no
change in reported power draw.
[1] Desktop 4th Generation Intel® Core TM Processor Family, Desktop
Intel® Pentium® Processor Family, and Desktop Intel® Celeron®
Processor Family Datasheet – Volume 2 of 2.
December 2013, revision 003, document number 328898.
Change-Id: I242f9138472de5a0b26b5852f632b53b2920132d
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This allows devices to be properly disabled when they are set to `off`
in the devicetree, or when a device has its `enabled` property set to
false.
A message is printed stating that a device is being disabled, even if
it was already disabled via DEVEN. However, it could be useful to have
this information, so such messages are kept.
The device 00:04.0 is a thermal sensor on the Acer C720, but it has not
been named as such in this patch. This is because the public datasheets
never formally acknowledge what the device is, and how it might differ
across platforms.
Tested on a Supermicro X10SLM+-F. The Mini-HD audio is disabled now,
silencing a warning from Linux.
Also tested on an Acer C720 (Google Peppy). Disabling "device 4" from
devicetree.cb works.
Also tested on an ASRock H81M-HDS. For this device, and all other test
devices, there were no regressions observed.
Change-Id: If1504e620967449a09f113a7c771a1ec30380644
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30270
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Internal pull up need to be enabled for GPD3 as power button pin for
PCH according cannonlake pch EDS vol1 table 17-1. Without that pin will
stay floating and hook up XDP can cause system shutdown as power buttone
event will trigger.
BUG=N/A
TEST=Hook up XDP on sarien platform, able to boot up into OS and stay
at power up state.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Ibe21da5f4a0797a3d62b36899f023908b46c25bf
Reviewed-on: https://review.coreboot.org/c/30374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
On some platforms SVI command completion is not reported by
voltage regulator. Because of that CPU got stuck in invalid
P-State, which resulted in lower frequency and inability to
reboot platform without performing cold reset.
Change-Id: I260c997f3a0f4547041785a3b9de78e34d22812a
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/30367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
CPUID 0xf47 tested on on 945G-M4 board.
Needs more MSR's consistency tests.
To do: test if speedstep.c and speedstep/acpi.c
are ok for model_f4x.
Change-Id: I285ad33804592e3df510d61dd24f14f944e05142
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/17409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Commit 8cf8aa2 [ec/google/chromeec: Use common MEC interface]
changed the return mechanism for the checksum on reads/writes
for MEC devices, but incorrectly handled the passed-in csum
parameter by not dereferencing. This led to the returned csum
value always being zero, which causes all EC commands with non-
NULL data_in to fail with a checksum error.
Fix this by storing the returned checksum in a temp variable,
and only assigning to csum when the pointer isn't NULL;
Test: build/boot google/chell, verify EC hello command succeeds,
keyboard backlight turned on at boot.
Change-Id: I7122c3fdc5a19f87f12975ee448728cf29948436
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Modify the vbios's eDP signal setting from level0(0dB)
to level1 (3.5dB) for bard
Add VBT blobs and include it in cbfs
BUG=b:119448457
TEST=Test & measure eDP signal
Change-Id: I0b854a6adad43844282aed61d26e798727b5cb62
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/30375
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds a convenient helper function to add vbt binaries to cbfs.
Change-Id: I80d9b3421f6e539879ad4802119fe81d7ea1e234
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30430
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The H81 chipset is the only non-LP Lynx Point chipset with 6 PCIe root
ports, all others have 8 [1]. The existing PCIe code assumed that all
non-LP chipsets had 8 root ports, which meant that port 6 would not be
considered the last root port on H81, so `root_port_commit_config()`
would not run. Ultimately, while PCIe still worked on H81, all the root
ports would remain enabled, even if disabled in the devicetree.
Also, remove `PCI_DEVICE_ID_INTEL_LYNXPOINT_MOB_DESK_{MIN,MAX}`, as they
are unused, and the MAX constant is incorrect.
Interestingly, this fixes an issue where GRUB is unable to halt the
system.
Tested on an ASRock H81M-HDS. The root ports disabled in the devicetree
do indeed end up disabled.
[1] Intel® 8 Series/C220 Series Chipset Family Platform Controller Hub
(PCH) Datasheet, revision 003, document number 328904.
Change-Id: If3ce217e8a4f4ea4e111e4525b03dbbfc63f92b0
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30077
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to issue tracker b:119238959 #4 & #6.
Hardware modify design to make GPP_E3 to be a switch of touchscreen
I2C CLK and SDA.
Control GPP_E3 to make touchscreen I2C CLK and SDA keep low during
power on initialization to avoid data transfer during this time.
After touchscreen IC initial complete, control GPP_E3 to high to
make touchscreen I2C CLK and SDA work normally.
Depending on touchscreen IC specification, device take 105ms for
power on initialization.
Change delay time from 120ms to 105ms.
BUG=b:119238959
BRANCH=firmware-rammus-11275.B
TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage
Flash FW to DUT, run S5 stress test and verify the result
Signed-off-by: YanRu Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I86452c1445243c499aeaf931dba286db169c5628
Reviewed-on: https://review.coreboot.org/c/30180
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch incorporates following changes to enable console on UART0
1. update default console number to 0
2. Enable PCI port for UART0
GPIO configuration will be done by coreboot based on correct console
number.
Change-Id: I735d33674b276b28e2cbb753d3a6d83edbabe89d
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/30424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Platforms moved to POSTCAR_STAGE so these are no longer used.
Change-Id: I9a7b5a1f29b402d0e996f2c2f8c6db3800cdddf3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch modifies the hatch flash layout to support
IFWI 1.6 with the following regions,
Flash Region 0: Descriptor
[0x0 - 0xFFF]
Flash Region 1: IFWI (consist of ME and PMC FW)
[0x1000 - 0x3FFFFF]
Flash Region 2: BIOS
[0x1400000 - 0x1FFFFFF]
Change-Id: I3d05fb50e970737a2552b85d6aebed943bf2b6cb
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/30413
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Marco Chen