size_t is an unsigned type and as such is a bad choice for a counting
down loop counter.
BRANCH=all
BUG=none
TEST=editing cli command line does not cause hangs any more
Change-Id: I0502553b5e2143052345edeb205a01558fccd9b8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1c171f739497fcd26589976676ab94b23cd7ee8b
Original-Change-Id: I4aa38379ac356114fc91a32cced2fa45a00a09d6
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262714
Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Tested-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9891
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add serial number to lib_sysinfo from coreboot table.
BRANCH=none
BUG=chrome-os-partner:37813
TEST=ryu boots and /proc/device-tree/firmware/android is populated
with "compatible", "hardware", and "serialno" properties
Change-Id: I565b332a16b177c51907ffab7976ebd7a665aaaf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5535119f5d499b04bdc178c3040241d2872c4e13
Original-Change-Id: Ie2e222780d1577689a1cbf76ae8514c74fc469f4
Original-Signed-off-by: Stephen Barber <smbarber@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/259140
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9881
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Since CL:170664, all SC_SPEED_XXX renamed to SC_SPEED1_XXX.
There is one missing in xhci_dump_slotctx() function which makes
compilation error.
BUG=none
TEST=enable USB_DEBUG and XHCI_DUMPS macros in xhci_private.h;
then emerge-auron libpayload
Change-Id: Ib96805cb7fc1cad17b205277539fb2120632f6f4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3ca0174e93ad131309ad07187c95c1e84c7d4fc5
Original-Change-Id: Id056b4684831a5717e87969e95ab17f11db29696
Original-Reviewed-on: https://chromium-review.googlesource.com/261414
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Harry Pan <harry.pan@intel.com>
Original-Tested-by: Harry Pan <harry.pan@intel.com>
Reviewed-on: http://review.coreboot.org/9877
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The WG (write gate) bit in C0_EBase allows the upper two bits of
the exception base address to be set to something other than 2'b10,
thus allowing it to be relocated out of the traditional KSEG{0,1}
range. Since we're not using the segmentation features introduced
by EVA to relocate the unmapped segments, the exception vectors
should remain in KSEG0. Don't set the WG bit so that the upper
two bits of the exception base (2'b00, because of the identity
mapping) are ignored and we execute the exception vectors out of
KSEG0.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=Build and boot on Pistachio.
Change-Id: Ie8b4eb6e41a328e7055736c9e3f6ff5ec83b9e13
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5b002f5ae71c7729e467d4fe3fd8db187e15dea
Original-Change-Id: Id8b930db1e7a68f52dd61be4dfa9edaee2bebf7d
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246697
Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9822
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add helper macros to convert between physical addresses and KSEG{0,1}
addresses. Also get rid of the virt_to_{bus,phys}_offset variables
as these are fixed values.
As nobody seems to be using getpagesize() on MIPS, no need to keep
virtual.c.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=Build and boot on Pistachio.
Change-Id: Ia26c8eae53eb8f860747a6b321363776841d1a94
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c422b02e9a2a20d130913b1cfb835ad74c39ddca
Original-Change-Id: I9476cd225a08534830c700cba7bf9d3ef871757e
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/247190
Reviewed-on: http://review.coreboot.org/9821
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use bus_to_virt() to convert the physical address of the DMA
coherent region to an address in KSEG1 which is suitable for
device memory accesses.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=Build and boot on Pistachio.
Change-Id: If382feda66f6d829f8b3548ab263cf603cab2e9b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a88a175f6d6db81d3154fb5dd31a44363ab94653
Original-Change-Id: I9ad6435495df2c71d8f81a782f1c3dfcfd4aeb28
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246696
Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9818
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I doubt anybody will ask for the configuration and request that
0 bytes be returned, but AFAICS that's legal, so let's support it.
Should have no effect on ChipIdea since it knows not to send more
data than requested by the host.
BRANCH=none
BUG=none
TEST=none
Change-Id: Ibfe57b593015fa5e0381c45ff9e39c3f912b4d4d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 45555e929d9d07dbb58ecfd18333f26375a0e3d7
Original-Change-Id: I7432772a1812c6f52c2b1688ee4c6f67d02ccf28
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/258064
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9790
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Only set internal variables when there's no risk of breaking things.
BRANCH=none
BUG=none
TEST=none
Change-Id: I8a8b63f60bdb70fad38130ce38eef81fe3725aa2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7119829096b444b790937b116fb782bcb5da70cd
Original-Change-Id: If698b11a7ff7688def310d8574fcfa7a40f703c1
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/258063
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9789
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
First handle IN packets, then OUT packets and finally SETUP packets.
This makes OS X happy. It isn't implemented as the data sheet recommends
but it avoids implementing a state machine and should always produce
observable effects identical to that of the stateful solution.
BRANCH=none
BUG=none
TEST=`fastboot getvar version` on OSX works
Change-Id: Ic7b27387771d6a7794fba12fc822fccc48770ea8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f0e59547519d50b1d34f6abdc6132330125f94f3
Original-Change-Id: Iada1cff011f11e7d5cb1a1b34896ab590f488ec7
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/258062
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9788
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
SET_CONFIGURATION(0) stops operation and is moves the
device to addressed mode.
BRANCH=none
BUG=none
TEST=USB device mode still works
Change-Id: I964d90ba8440b6f428896acc9fe63e1114390da6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 402bc907222d07765b3438967edf26cc1a79d775
Original-Change-Id: Iebad024e1ed2e344dba73b73a9b385a4ac4cb450
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/250791
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9785
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some IN transfers must be terminated by an empty packet
because otherwise the host wouldn't know.
The zlp() function determines this requirement in
accordance to USB rules: If the transfer's size is aligned
to the maximum packet size, and the host expects a larger
transfer, add the empty packet as a hint.
BRANCH=none
BUG=none
TEST=USB device mode still works
Change-Id: Ia69f3d017f72a3a0e0b21bac72fe97be184c7daa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fd0e946e4948a74a9ed15a5eed6ce827b7672a56
Original-Change-Id: I8153cc5bd2ff1c88e383c1dbcddaf1bf72f9194c
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/250790
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9784
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a framework for USB device mode controllers
and a driver for the ChipIdea controller which
is part of the tegra platform.
TODO:
- fix USB detach/attach
- implement zero length packet handling properly
BUG=chrome-os-partner:35861
TEST=none
BRANCH=none
Change-Id: I8defeea78b5a3bdbf9c1b1222c2702eaf3256b81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 542332291880c4026a05a960ceb91d37891ee018
Original-Change-Id: Ib4068d201dd63ebeda80157bd3130f3059919cdd
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/243272
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8756
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some SOCs (like pistachio, for instance) provide an 8250 compatible
UART, which has the same register layout, but mapped to a bus of a
different width.
Instead of adding a new driver for these controllers, it is better to
have coreboot report UART register width to libpayload, and have it
adjust the offsets accordingly when accessing the UART.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the rest of the patches integrated depthcharge console messages
show up when running on the FPGA board
Change-Id: I05891a9471a5369d3bfafe90cd0c9b0a7e5a667e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c30845f269ec6ae1d53ddc5cda0b4320008fa42
Original-Change-Id: Ia0a37cd5f24a1ee4d0334f8a7e3da5df0069cec4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240027
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9739
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There was a recent patch by Deepa Dinamani applied to coreboot's
cache.c which fixed a bug that occurred when icache is on but dcache
is off ("arch: armv7: Fix cache sync instructions."). Although this
bug is not likely to be encountered by the time libpayload is run,
it's worth applying it to keep things in sync.
BUG=none
BRANCH=none
TEST=n/a since we have icache and dcache enabled on all ARM platforms
when libpayload is run.
Change-Id: I83d9f96acb702975585e5d47c90e2ddaca488f6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 31f985b58ac9227684fbe27481129ba01fd3ab8a
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I4ab0d97ef3a97dcd0fa96e10273c3b32486e0b40
Original-Reviewed-on: https://chromium-review.googlesource.com/243276
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9737
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
A payload may want to run erase operations on SPI NOR flash without
re-probing the device to get its properties. This patch passes up
three properties of flash to achieve that:
- The size of the flash device
- The sector size, i.e., the granularity of erase
- The command used for erase
The patch sends the parameters through coreboot and then libpayload.
The patch also includes a minor refactoring of the flash erase code.
Parameters are sent up for just one flash device. If multiple SPI
flash devices are probed, the second one will "win" and its
parameters will be sent up to the payload.
TEST=Observed parameters to be passed up to depthcharge through
libpayload and be used to correctly initialize flash and do an erase.
TEST=Winbond and Gigadevices spi flash drivers compile with the changes;
others don't, for seemingly unrelated reasons.
BRANCH=none
BUG=chromium:446377
Change-Id: I92b7ff0ce66af8d096ec09a4c900829ef6c867e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126
Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239570
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9727
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds a directory with files copied over from Brain along with
build-related changes so that emerge-veyron_danger works. The next
patch will account for other differences.
BUG=none
BRANCH=none
TEST=emerge-veyron_danger coreboot works
Change-Id: I7ebd431cd48e257dfa761d32013d0e251b4f155d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a0f7d2f96540df6fdcd7a99d9e0fa02bbc6c1f73
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id265a7715f07a647a449f00097bf40f7c9b4c068
Original-Reviewed-on: https://chromium-review.googlesource.com/241711
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9646
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This adds a directory with files copied over from Jerry, in addition to
build system related changes (configs/* and Kconfig stuff) necessary
to emerge-veyron_brain coreboot.
The next patch will account for differences between Jerry and Brain.
BUG=none
BRANCH=none
TEST=emerge-veyron_brain coreboot works
Change-Id: Ib0da9caf80f46991b96bcb5756f807237f0902e1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 9509d6277dae25a78062c1301054a39f704b33fe
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I972f2623d9b0a43e3ea5312b3c4cd34ab44edc36
Original-Reviewed-on: https://chromium-review.googlesource.com/236989
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9637
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
make oldconfig doesn't like 'y' as response to a choice item
such as the architecture list. An empty response, however, is
acceptable, so use that.
Change-Id: Ic3164dd3f40e4a7f5d91e3a7008893655cd69ac2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9676
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Extended the 32bit CPU counter to 64bit by adding a static
variable that takes into account CPU counter overflow.
The varibale is updated everythime the timer_raw_value
function is called so I assume that the function is called
often enought to not miss an overflow of the CPU counter.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works as expected
BRANCH=none
Change-Id: I98bcc56e600dcff0c6da7c140dd34faec5e00885
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 972b105f950d800fa44f27bce090f6b89a5a84b9
Original-Change-Id: Id67b14e9d9c2354bc417b6587b615d466690c9b7
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/247642
Original-Reviewed-by: Daniel Ehrenberg <dehrenberg@chromium.org>
Reviewed-on: http://review.coreboot.org/9672
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The address of the output buffer sent to the device should be
the bus address and not the virtual address.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA and bring up board;
USB works properly after this change
BRANCH=none
Change-Id: I5c9d199e17c3f4303095ad73f4980d32d04c6118
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 942c385c112c2a4e409da806548081d3e2f8f438
Original-Change-Id: I0c06196501a968a72cb3f2c7dd1027bb22cdaada
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245387
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9455
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Total FIFO length is split into 512 byte blocks.
Allocate these blocks to GRXFSIZ and GNPTXFSZ evenly.
This method avoids hardcoding and makes the FIFO size value
work for dwc2 controllers that have a different FIFO ram size.
BUG=chrome-os-partner:32634
BRANCH=None
TEST=Boot kernel from USB
Change-Id: I78ce0fa4c4600fb56c991874a93bdd6674e648c2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5645a25e95f84359cd10fc9fcf56e1f73fd6ce87
Original-Change-Id: Ib50a08c193f7f65392810ca3528a97554f2c3999
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233119
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9454
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BUG=chrome-os-partner:29778
TEST=emerge-veyron libpayload
Change-Id: I33f312a939e600b8f4e50a092bb61c5d6bc6d741
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 39ffe53336a2a3b2baa067cdd3dccca5ae93f68e
Original-Change-Id: Idad1ad165fd44df635a0cb13bfec6fada1378bc8
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211053
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9453
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Non-x86 boards currently need to hardcode the position of their CBFS
master header in a Kconfig. This is very brittle because it is usually
put in between the bootblock and the first CBFS entry, without any
checks to guarantee that it won't overlap either of those. It is not fun
to debug random failures that move and disappear with tiny alignment
changes because someone decided to write "ORBC1112" over some part of
your data section (in a way that is not visible in the symbolized .elf
binaries, only in the final image). This patch seeks to prevent those
issues and reduce the need for manual configuration by making the image
layout a completely automated part of cbfstool.
Since automated placement of the CBFS header means we can no longer
hardcode its position into coreboot, this patch takes the existing x86
solution of placing a pointer to the header at the very end of the
CBFS-managed section of the ROM and generalizes it to all architectures.
This is now even possible with the read-only/read-write split in
ChromeOS, since coreboot knows how large that section is from the
CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be
changed on systems that place other data next to coreboot/CBFS in ROM).
Also adds a feature to cbfstool that makes the -B (bootblock file name)
argument on image creation optional, since we have recently found valid
use cases for CBFS images that are not the first boot medium of the
device (instead opened by an earlier bootloader that can already
interpret CBFS) and therefore don't really need a bootblock.
BRANCH=None
BUG=None
TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco.
Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c
Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229975
Reviewed-on: http://review.coreboot.org/9620
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have two drivers for a 100%-identical peripheral right now, mostly
because we couldn't come up with a good common name for it back when we
checked it in. That seems like a pretty silly reason in the long run.
Both Tegra and Rockchip SoCs contain UARTs that use the common 8250
register interface (at least for the very basic byte-per-byte transmit
and receive parts we care about), memory-mapped with a 32-bit register
stride. This patch combines them to a single 8250_mmio32 driver (which
also fixes a problem when booting Rockchip without serial enabled, since
that driver forgot to check for serial initialization when registering
its console drivers). The register accesses are done using readl/writel
(as Rockchip did before), since the registers are documented as 32-bit
length (with top 24 bits RAZ/WI), although the Tegra SoC doesn't enforce
APB accesses to have the full word length. Also fixed checkpatch stuff.
A day may come when we can also merge this driver into the (completely
different, with more complicated features and #ifdefs) 8250 driver for
x86 (which has MMIO support for 8-bit register stride only), both here
and in coreboot. But it is not this day. This day I just want to get rid
of a 99% identical file without expending too much effort.
BUG=None
TEST=Booted on Veyron_Pinky and Nyan_Blaze with and without serial
enabled, both worked fine (although Veyron has another kernel issue).
Change-Id: I85c004a75cc5aa7cb40098002d3e00a62c1c5f2d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e7959c19356d2922aa414866016540ad9ee2ffa8
Original-Change-Id: Ib84d00f52ff2c48398c75f77f6a245e658ffdeb9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225102
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9387
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Don't attempt to scan the PCI bus if the bridge is disabled. When
the PCI bridge is not setup and enabled, it is possible for the
secondary bus register to contain the value zero (0). In this case
the usb_scan_pci_bus routine gets into an infinite recursive loop
which ends only when the heap or stack is exhausted. This patch
verifies that the PCI bridge is enabled by verifying that it is
enabled for either memory or I/O operations. When enabled, the
secondary bus is scanned.
BRANCH=none
BUG=None
TEST=Build and run on Samus
Change-Id: I6826dc1d73b7c24729de5ac7c4d3534922ca73c5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 63d04b47934761351b54c847a2692bdef81ce54f
Original-Change-Id: I855240c52fa3eba841e6754816ebbcb824abc4cd
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/236382
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/8734
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Paging code is tricky and figuring out what is wrong with it can be a
pain. This patch tries to ease the burden by giving a little more
information for prefetch and data aborts, dumping the Instruction Fault
Address Register (IFAR), Instruction Fault Status Register (IFSR) and
Auxiliary Instruction Fault Status Register (AIFSR) or the respective
Data registers. These contain additional information about the cause of
the abort (internal/external, write or read, fault subtype, etc.) and
the faulting address.
BUG=None
TEST=I have read through enough imprecise asynchronous external abort
reports with this patch that I learned the bit pattern by heart.
Change-Id: If1850c4a6df29b1195714ed0bdf025e51220e8ab
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bf3b4924121825a5ceef7e5c14b7b307d01f8e9c
Original-Change-Id: I56a0557d4257f40b5b30c559c84eaf9b9f729099
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223784
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9345
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If a TD is comprised of one or more Normal TRBs and terminated with an
Event Data TRB, then the transition to the Idle state (and associated
Stream state save) could occur after all the data for the TD has been
moved (e.g. after Transfer Event TRBs have been executed), but before the
Event Data TRB is executed. Under these conditions, the execution of the
Event Data TRB is necessary to complete the TD, otherwise it does not
occur until the next time the Stream is scheduled. This could lead to the
lock up.
The Evaluate Next TRB(ENT) flag provides a means of forcing the execution
of a terminating Event Data TRB. Setting ENT flag in last Normal TRB makes
the xHC to evaluate the Even Data TRB.
BUG=chrome-os-partner:29375
TEST=Verified kernel boot-up on storm from previously failing USB stick.
USB stick model: Sandisk Ultra USB 3.0 Pen Drive 32 GB
Strontium Jet USB 3.0 Pen Drive 32 GB
Change-Id: I092e2109c55c2274239c493cb67b47d730304ed2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7eefb3b2858c841165ae839d349d2a0be50fbcc8
Original-Change-Id: I4e123577ec5a5996d87d2fc52cb6cf5c571c9fae
Original-Signed-off-by: Sourabh Banerjee <sbanerje@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220123
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/8736
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If EHCI controller has TT (Transaction Translator) support in
root-hub, then we need to keep control over this controller when
USB keyboard (low-speed device) is connected to root-hub port.
Need to add "CONFIG_LP_USB_EHCI_HOSTPC_ROOT_HUB_TT=y" to config file
(e.g. payloads/libpayload/configs/config.nyan_big) to support this
feature.
BUG=chrome-os-partner:32355
TEST=Tested on nyan_big platform.
Press ESC+REFRESH+POWER keys on internal keyboard to power up.
Press Left Arrow or Right Arrow on USB keyboard to switch between
"English" and "Default Locale" in coreboot UI. Or unplug and plug
in device and try again.
Root hub <- low-speed USB keyboard
Root hub <- full-speed hub <- low-speed USB keyboard
Root hub <- high-speed hub <- low-speed USB keyboard
Change-Id: Iaa2823f64c8769fc808ee7a316c378f18f004e63
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4ad57fd673d6dc8814fe99a4ac420566bb17e77b
Original-Change-Id: Id86a289bc587653b85227c1d50f7a4f476f37983
Original-Signed-off-by: Jim Lin <jilin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/220125
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8737
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of forcing boards to have DMA region below 4GiB, provide
Kconfig option DMA_LIM_EXCL that a board can use to set the upper
limit in MiB units on the address range reserved by DMA. By default,
this value is 0x1000 i.e. 4GiB limit on the DMA upper address.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush. Default value is seen as 0x1000.
Change-Id: Ie35d3844a0989486ae022f8922fdd4c9d7d57fb4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6716cf312a103bc0440a558fc43c8c77869816e3
Original-Change-Id: I3ecbb4ec90995ab1568cb0924d5ce9467492697d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245250
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8800
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Align struct members with tabs.
Change-Id: Ie8bdbd718c7217a3f3768dd037fa7c10badbc05e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/8854
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The raw_write_sctlr_current() cannot be used in mmu_disable() because
it pushes some registers to cached stack, and then just after cache
disabled, the value was gone.
BRANCH=none
BUG=none
TEST=build and boot on mt8173-evb
Change-Id: I512405b7917f27d16bdd3c51d9459827ad714e67
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aafe64922cc4cd01ecb099db106d04538e3e57ff
Original-Change-Id: I0dda8518d14c46fae1fe76e3629bd4ee81c1e0ee
Original-Signed-off-by: HC Yen <hc.yen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/240323
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8799
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Allow read/write to registers at a given el. Also, make read/write
registers at current el call this newly added function.
BRANCH=none
BUG=none
TEST=build and boot on mt8173-evb
Change-Id: Id69f0fdc07193c5c7e997712f0cd99de6f41510b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c091917babc39d9ab997f51f81b486c9aa900c24
Original-Change-Id: I0944946642066b88331e497a92388e74e86902d0
Original-Signed-off-by: HC Yen <hc.yen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/240322
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8798
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The framebuffer structure lives in the coreboot tables. Those
tables have a checksum calculation applied over all the entries.
Therefore, one shouldnot be modifying fields within the coreboot
table entries because the calculated checksum would be wrong.
BRANCH=none
BUG=chrome-os-partner:31936
TEST=On ryu, confirmed dev screen still works as well as cbmem utility
once booted.
Change-Id: I93830a8efe98aa848f2b0f8388688de0e93b2f82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6026ca5ad0254c14c30412882dc63550656c7d16
Original-Change-Id: Ic9c164ded03d10d6f6f3ce15e9b38b1f6ce61a91
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230471
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8797
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Allocate noncacheable memory for frame buffer and save base
address to sys_libinfo.
BRANCH=none
BUG=chrome-os-partner:31936
TEST=build and test on ryu
Change-Id: I19a8079616376dc7c1a8ecdbd7499c2553b8c6c3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cebb5650167264902548339bb1a2b428f3b7f4ed
Original-Change-Id: I7bfbfefb92001632ce3d572a50e46188795c4ab8
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226404
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8796
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is important since mmu is disabled during the post_sysinfo_mmu_setup call
and calling printf can cause unaligned access.
BUG=None
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt with console_init
Change-Id: I5ef72ee449fdcf30186f97485cc532d6c56b2c5d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 688ef3856d0502d057c9543ee7763601156e6385
Original-Change-Id: Ie376e394d084edd6c999fc9edde79f15a0264e7b
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/222664
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8795
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Provide a function to obtain a new memrange with requested properties (type,
size, alignment, max_addr and other restrictions) from the set of available
memranges passed in coreboot table. One user of this function would be getting
memrange for dma, another one would be framebuffer.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Change-Id: Ic5a63ca2dca6c71f4ca2d77e2e2c8180d32a38e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3cd75756e1405e044c029f2878bfcc9c8c962bdf
Original-Change-Id: I187d73a4d55d3c6f49afbe9852901672d25de8dc
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/222110
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8794
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
1. keep functions and objects used entirely within mmu.c as static.
2. DMA region finding needs to terminate. Therefore, the next address
to be attempted needs to be less then the current end address.
3. Ensure mmu_ranges passed to mmu_init_ranges_from_sysinfo() has
0 entries marked as used.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Booted ryu with RAM hole above cbmem tables below 4GiB.
Change-Id: I71a9cb89466978aa63fca5d8bee97b8af75ea206
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 66518fd86e676bbddf52e9d9afdd76d72c8e2222
Original-Change-Id: I5cb4e5009359cb04c4e1b5fe60845f80fbdff02c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221725
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8793
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
What this change does:
1) Initialize limited page tables as soon as we jump into libpayload. Basically
two ranges are initialized. One is for the BASE_ADDRESS and other is for the
coreboot_tables. With page tables initialized and MMU enabled, we jump into
code to parse coreboot tables.
2) Once coreboot tables are parsed and we have complete picture of the memory,
we perform a complete page table initialzation and enable MMU and then jump to
payload.
Additionally, we also:
1) Initialize DMA memory on our own depending upon the memory map. It ensures
that the DMA buffer is placed in 32-bit memory.
CQ-DEPEND=CL:216826
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and we are able to start execution of libpayload in
EL2 and reach kernel login prompt
Change-Id: I8a6203e465868bc2a3e5cc377e108f36cc58e2fa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7695bb7afe34ea460282125a0be440e8994b01e4
Original-Change-Id: Ie0f47b7759d4ac65a6920f7f2f7502b889afda6d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216824
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8792
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to ease the process of reading and writing any register at current EL,
provide read_current and write_current assembly macros. These are included in
arch/lib_helpers.h under the __ASSEMBLY__ macro condition. This is done to allow
the same header file to be included by .c and .S files.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully for ryu
Change-Id: I79241a944b68ebb24865e745a9835f54ab6d1a8f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2b55fbde466126c4de7f5f7bb2d1427196be842f
Original-Change-Id: I678ab89c4aa1b08898166e135b5ab2d6453bb5e8
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214576
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8801
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Adds support for initializing mmu, setting up dma areas and enabling mmu based
on the memranges passed on in the coreboot tables.
CQ-DEPEND=CL:216826
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully
Change-Id: Id41a4255f1cd45a9455840f1eaa53503bd6fef3f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f2c6676bf51fcd85b61e9e08a261634a78137c4c
Original-Change-Id: I217bc5a5aff6a1fc0809c769822d820316d5c434
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216823
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8791
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Libpayload should be able to setup its own dma areas and not depend on coreboot
tables for passing this information. This patch and next allow libpayload to
setup dma areas while performing mmu_init
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and dma areas are setup properly with the mmu init patch
Change-Id: I5f6fd19a957c7626a2bbe6b826c8987e64ed248f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4f3552b8d3439a8b12d1e0b15ef67dcb14b8c96a
Original-Change-Id: I44d9f394fa349abd7182c4ba10f1eaefd6e4fdaa
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216822
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8789
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
By default we dont want to use the special DC instruction. Thus getting rid of
the DONT_USE_DC macro and enabling code appropriately in memset.S
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and memset works fine for mmu init
Change-Id: Icb3193f4f0d122726dcdacbdcacbf53eba30e235
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 54f639ef2348acab54e32b18f6826a67bf52bc14
Original-Change-Id: Id89ec2c1731d21496eca617a3c03abaf48062908
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216820
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8787
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Allow more flexibility by reading and writing to system registers at current
EL. Instead of specifying what _ELx register to write to, code can specify
_current.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles and boots to kernel on ryu
Change-Id: Id38b675bfe67ca1e25f8c268192114e3f0bee800
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6d4d07e26fc964dc3aaebfe03db59596d90093e9
Original-Change-Id: Ic1d9e18e6fc016a04f17621a148e62d6cbd04ce7
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214577
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8785
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add library helpers to access standard arm64 registers. This library also
provides functions to directly read/write register based on current el. So, rest
of the code doesnt need to keep checking the el and call appropriate function
based on that.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Libpayload and depthcharge compile successfully for ryu
Change-Id: Ibc0ca49f158362d4b7ab2045bf0fbd58ada79360
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2ca6da580cb51b4c23abdaf04fee2785e5780510
Original-Change-Id: I9b63e04aa26a98bbeb34fdef634776d49454ca8d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214575
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8784
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA and bring up board; works as
expected
BRANCH=none
Change-Id: I368494f388b82969dda0ce73a38824791efce616
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e4c2bbcbdbcf706062724cffe2d5f15953468ace
Original-Change-Id: Id5c9b1d65c6ec87f2aba06995dc940c50afb041f
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245386
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8746
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add CPU frequency corresponding to SOC.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; behaves as expected.
BRANCH=none
Change-Id: I05458070a15c6cf1ef0fc2104715a63902a38887
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4afe332bcc41afeb7e31e918e345c3336f7dc604
Original-Change-Id: I55b788faf7984bafc2509cac69867a772c7cb863
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241427
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8853
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
timer_raw_value must return the number of CPU ticks, and not
the time obtained by dividing the ticks by the CPU frequency.
The CPU counter is increased at every 2 CPU clocks
and therfore the number of ticks will be the counter value
multiplied by 2.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA; it works properly.
BRANCH=none
Change-Id: Iae62cb328e882f84822250bdf72146321ca9bbe0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7ab25ce7dcaffb453ee774d870963a56444d46af
Original-Change-Id: I74408950900463a2c054d5aebd3edb005a325adb
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/242393
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8744
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The default string functions work with multiple of 4 bytes
(sizeof(unsinged long)); MIPS will use LW/SW instructions
for these operations and if the source and destination
addresses are not aligned it will trigger an exception.
Therefore, this implementation does all data access operations
per byte, because there is no guarantee that the provided
strings are properly aligned.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; behaves as expected
BRANCH=none
Change-Id: I05b43673deb954f022d12cb9c3d7baac26be2a34
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e13b3d31726404abd8c8e5c8780d3d3e16e032d
Original-Change-Id: I456e312eb6b7fee2eff10e461af7f578aed07648
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241885
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add the basic build infrastructure and architectural support
required to build for targets using the MIPS architecture.
This will require the addition of cache maintenance.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA with Depthcharge as payload;
successfully executed payload.
BRANCH=none
Change-Id: I75cfd0536860b6d84b53a567940fe6668d9b2cbb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 758c8cb9a6846e6ca32be409ec5f7a888ac9c888
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Change-Id: I0b9af983bf5032335a519ce2510a0b3aca082edf
Original-Reviewed-on: https://chromium-review.googlesource.com/219740
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8741
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The correct return value for errors on a cbfs_media->map() call is
CBFS_MEDIA_INVALID_MAP_ADDRESS, not NULL. Not sure if that's the best
choice (since 0xffffffff is probably a more likely valid address than 0
there), but that's what the upper layers expect right now.
BRANCH=veyron
BUG=None
TEST=Press CTRL+L with an RW_LEGACY section filled with 0xff. Observe
how cbfs_get_header() returns failure without doing a bunch of NULL
pointer accesses first (not that those have any visible effect on
Veyron, but that's another problem...)
Change-Id: I3d012fc9af9da6e01159990a6bdd62c38fc22329
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3a609e17bb9b0ef4d3a833f72fa4fbfd8e8cb0ab
Original-Change-Id: I0793434116a8c568e19fe0dee24f13942fc50f25
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238991
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/8758
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This adds CB_TAG_RAM_CODE and an entry to sysinfo_t.
BUG=chrome-os-partner:31728
BRANCH=none
TEST=Built and booted on pinky w/ depthcharge patch and saw that
/proc/device-tree/firmware/coreboot/ram-code contains correct
value
Change-Id: I35ee1bcdc77bc6d4d24c1e804aefdbbfaa3875a4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ca6d044f2e719ded1d78a5ab3d923e06c3b88d6b
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I69ee1fc7bc09c9d1c387efe2d171c57e62cfaf3f
Original-Reviewed-on: https://chromium-review.googlesource.com/231132
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8755
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The WiFi calibration blob saved in the CBMEM by coreboot needs to be
visible by depthcharge to supply it to the kernel.
BRANCH=storm
BUG=chrome-os-partner:32611
TEST=none yet
Change-Id: I43a857f073a47ca315d400df4c53d5eb38e91601
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 46a649608e6740e07c562c722fadd8c64e264b5f
Original-Change-Id: Iecd8739c9269b58064b3c3275f5376cebcd6804b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225506
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8753
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Chapter 3.1 "Periodic Frame List" of EHCI 1.0 specification says
"Frame List Link pointers always reference memory objects that are
32-byte aligned."
jwerner@chromium.org suggests setting it to be 64-byte aligned for
consistency with other EHCI queue structures.
BUG=chrome-os-partner:31993
TEST=Tested on nyan platform. Before adding patch, USB keyboard behind
an external hub is not working to switch between "Default Locale" and
"English" (after pressing ESC+REFRESH+POWER on embedded keyboard and
later Left/Right-Arrow key on USB keyboard).
Change-Id: Ie6259f2df20ae2618c2074e831fad087f227091d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 23fc02e6ba3b17be4eaf18810ec6fc0d9c0e0b9a
Original-Change-Id: If52ddc43ebd5d509c19f104928dced5bd09b1706
Original-Signed-off-by: Jim Lin <jilin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/218403
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8738
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Data toggle should be running like 0, 1, 0, 1, ...
In the failed case (where a low-speed USB keyboard or km232 device
is installed), data toggle will be running as 0, 1, 0, 1, ..., 1, 1.
Therefore causing Halted or Transaction Error bit to be set in qTD
Status field.
BUG=None
BRANCH=None
TEST=Tested on nyan_kitty platform, firmware-kitty-5771.61.B branch.
Attached USB keyboard or km232 device to root-hub port (same side as
SD card slot).
Made sure no transaction error after doing interrupt transfer.
Change-Id: I576f3c583dae4c279a6e0e8ffdfce5abe463277d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 64b0428aaab869e20f6720669e953acf82ecb846
Original-Change-Id: Ic2c0f95cff2ae6e314967b0b82231a962255f1a7
Original-Signed-off-by: Jim Lin <jilin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233857
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8747
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These functions are usually provided by gcc lib, which is not supposed
to be included on embedded platforms. This patch adds a no thrills C
implementation.
Other than MIPS platforms are happy using the gcc library provided
implementation, but in case of Chrome OS MIPS toolchain the libraries
are compiled with the small GOT, such that the entire data segment
does not fit.
With this implementation mips, arm and x86 targets build fine.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=checked the logic by incorporating this code into a C file and
running a loop continuously comparing random inputs' division and
left and right shift results.
The test ran for extended periods of time without failure.
Change-Id: I468acd2fdbcdd493a76758a394e79cad35f9535a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2cc5f8668dd2609408af8da5a74c5a3d063fc0d3
Original-Change-Id: Ib46616d7eb0b2b497199270057514f730bb1cb0b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232232
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8742
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It turns out that CB_TAG_ACPI_GNVS is handled in both x86 specific and
common coreboot table parsing code. The MRC cache case used only by
x86 is handled in the common code.
This patch restores sanity and moves processing to where it belongs.
BRANCH=none
BUG=none
TEST=verified that arm and x86 targets build.
Change-Id: Iaddaa3380725be6d08a51a96c68b70522531bafe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0afae893d5027026cb666cd46e054aeae4e71f83
Original-Change-Id: I2c114a8469455002c51593cb8be80585925969a7
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225457
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8752
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Pass MAC addresses found in coreboot table into lib_sysinfo.
BUG=chrome-os-partner:32152
TEST=with all changes in place MAC addresses are properly inserted
into the kernel device tree.
Change-Id: I6b13c1c2c246362256abce3efa4a97b355647ef8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e2fe74f86b4ed43eb8a3c9d99055afc5d6fb7b78
Original-Change-Id: I1d0bd437fb27fabd14b9ba1fb5415586cd8847bb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219444
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8751
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There are three instances of coreboot.c in libpayload. for x86, arm
and arm64 architectures. The arm and arm64 instances are exactly the
same. The differences with the x86 instance are as follows:
- a very slightly different set of coreboot table tags is parsed (one
tag added and two removed)
- instead of checking a fixed address if it contains the coreboot
table, the x86 version iterates over two address ranges.
This patch refactors the module, leaving architecture specific
processing in arch subdirectories and moving the common code into
libc.
BUG=none
TEST=none yet
Change-Id: I1c7ad6f74e3498e93df78086ba0ff708c08e0a5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3df209d58ebd5c5b1cf0168f6466e065d1ef3598
Original-Change-Id: I6dfed73f6ba5939f692d0f98d2774c0e0312a25f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210770
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8750
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Make board ID value supplied in the coreboot table available to the
bootloader on all three architectures.
BUG=chrome-os-partner:30489
TEST=none yet
Change-Id: I6c2d39e94212b55650929d7d99896581d23f789d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 723e4a600a5d3a03e960169b04f8322f6dd2486b
Original-Change-Id: I7847bd9fe2d000a29c7ae95144f4868d926fb198
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210430
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8730
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As opposed to other architectures, on MIPS gcc toolchain provided
gcclib is not always adequate, for instance when the library does not
account for the case when data segment is too large to fit into the
64K GOT.
Let's make sure the library is not included when building for MIPS
targets.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the rest of patches applied the FPGA board boots all the way
to verifying and loading the kernel from the USB stick.
Change-Id: I710d3c49bdc57877152cf28d5bd8cb4fa4d0b9ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f8d7d84c81af7e3eee1c8f3304c15069e8701cde
Original-Change-Id: I1a26b9e575a20101329359b80dffc236ef7f9e9f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232231
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8740
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add support to check if the driver for console_out or console_in is already
present in the list. If console_init is called twice, then the driver might get
added twice leading to a loop.
BUG=None
BRANCH=None
TEST=With console_init in libpayload and depthcharge both, there are no console
loops seen anymore
Change-Id: I9103230dfe88added28c51bff33ea4fa1ab034c1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6931236ba2cfa71849973fe41cc340b7d70656ad
Original-Change-Id: If9a927318b850ec59619d92b1da4dddd0aa09cd1
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214072
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8739
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds a simple function to convert a string in UTF-16LE
to ASCII.
TEST=Ran against a string found in a GPT with the intended outcome
BRANCH=none
BUG=none
Change-Id: I94ec0a32f5712259d3d0caec2233c992330228e3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1104db8328a197c7ccf6959a238277f416a2113a
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Change-Id: I50ca5bfdfbef9e084321b2beb1b8d4194ca5af9c
Original-Reviewed-on: https://chromium-review.googlesource.com/231456
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8733
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
For memalign() requests the current allocator keeps metadata
about each chunk of aligned memory that copmrises the size
requested. For large allocations relative to the alignment
this can cause significant metadata overhead. Instead, consider
all memalign() requests whose size meets or exceeds 1KiB or
alignment that meets or exceeds 1KiB large requests.
These requests are handled specially to only allocate
the amount of memory required for the size and alignment
constraints by not allocating any metadata as the whole region
would be consumed by the request.
BUG=None
BRANCH=None
TEST=Built and tested various scenarios. Noted the ability to
free() and properly coalesce the heap as expected.
Change-Id: Ia9cf5529ca859e490617af296cffd2705c2c6fd8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4e32fc57626dac6194c9fd0141df680b4a5417e8
Original-Change-Id: Icdf022831b733e3bb84a2d2f3b499f4e25d89128
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242456
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some USB sticks seem to send a NAK at a place where they mustn't
by spec, leading to a controller side error condition.
To avoid it, wait a millisecond which is enough to get past the
NAK condition. That delay only happens on device discovery so it
won't affect boot time by more than 1ms per device.
BUG=chromium:414959
BRANCH=none
TEST=depthcharge recognizes a Lexar 16GB USB stick after applying
this change.
Change-Id: I0e385702a5259b16fda0a253fc121d8f66e6705c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 10bbfda8395af009e7f910cc503f50c2ad969ae8
Original-Change-Id: I6dd5ca34e9f3767003ccb0ca9daaf16116f4a2df
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228791
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Sheng-liang Song <ssl@chromium.org>
Reviewed-on: http://review.coreboot.org/8735
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
EHCI driver accesses mmio space using regular struct pointers. In order to avoid
any CPU re-ordering, memory barrier is required in async_set_schedule,
especially for arm64. Without the memory barrier, there seems to be re-ordering
taking place which leads to USB errors with some flash drives as well as
transfer errors in netboot.
BUG=chrome-os-partner:31533
BRANCH=None
TEST=With the memory barrier introduced, netboot for ryu completes transfer
without any error and finishes within 6-7 seconds.
Change-Id: Ib6d29dc79fd5722c27284478e8da316929e86bff
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 561bdd746c4d4446ce0a6d21337d354625d85ddc
Original-Change-Id: Ic05d47422312a1cddbebe3180f4f159853604440
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/213917
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8732
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add support for memory barriers in arch {arm,arm64,x86}. This is required to
force strict CPU ordering. Definitions are based on FREEBSD atomic.h
definitions.
BUG=chrome-os-partner:31533
BRANCH=None
TEST=Memory barriers tested with ehci driver on arm64
Change-Id: I50060b0f33a6bd6cb95e829df079df379b2ff2a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 937d66cdab92a8521ede8307f5af8f5c20d3e552
Original-Change-Id: Ie51e3452f7a254b24111000da5dbe8714ac22223
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/213916
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8731
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Similarly to xzalloc() and xmalloc() provide an xmemalign() function
to do the approriate assertions on allocation failure.
BUG=None
BRANCH=None
TEST=Built and booted using xmemalign().
Change-Id: I59579d9ee973af3bb34037b7df5b1024b60e348d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3001822656024dbfc34d6b849a0245274b8c0f46
Original-Change-Id: Ie307d4c9c1882bba25745afe38455f2682303e37
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242455
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/8728
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add OpenBSD's header-only implementation of some
basic data structures, imported from
src/sys/sys/queue.h, revision 1.38
(all whitespace errors kept verbatim)
Unlike home-grown solutions they likely handle
all corner cases correctly from the start and
unlike Linux's solution it's properly documented
(see OpenBSD's LIST_INIT(3)) and also BSD-l.
BRANCH=none
BUG=none
TEST=none
Change-Id: I89ae4df0c73662c355537283e7559af03a8b99a0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6f89e0316e6d68158c689bed4b1bdfe168c1449a
Original-Change-Id: Ie08a567851a2f07cbd2ac80ba31d8bca9844937d
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/240190
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/8727
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The serial driver hangs in cases when FIFO has more than single word to be
processed. Easiest way to reproduce is to paste a string of greater than 4
characters in cli.
Clearing the RXSTALE interrupt without draining all the characters from FIFO
leads to the issue as the driver is dependent on msm_boot_uart_dm_read
function to reinitialize for next transfer.
Logically the driver is organized in such a manner that next transfer never
gets initiated till rx_data_read < total_rx_data. Clearing the RXSTALE without
consideration of total number of characters (or words) unprocessed makes the
msm_boot_uart_dm_read to return on the first if conditional. Thus the driver is
stuck forever.
A quick fix is to avoid clearing the stale interrupt. Reset is handled whenever
a new transfer is initialized in msm_boot_uart_dm_init_rx_transfer.
BUG=chrome-os-partner:29542
TEST=manual
-Paste a string greater than 4 characters in cli.
Original-Change-Id: I016afb01a77cd14764f0176f6bf144fb29796c2f
Original-Signed-off-by: Yogesh Lal <ylal@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209512
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
(cherry picked from commit 61528884ad2c0a8e146054bbfeb01a3bc73b9692)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I936af5daa52a25f62133bdf9fb44f0b68cf34e88
Reviewed-on: http://review.coreboot.org/8667
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
`di` points to a single item in xhci->dev[], which is malloc'd
collectively. Trying to free() leads to pain.
Change-Id: Ibd99eda905d43cbf2d2c111dfd0186ed6b119329
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8515
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Init curses as late as possible and tear them down early. There are possible
error outs after that and they don't look nice with curses initialized.
Change-Id: I9128ae8eee25940716b8d223cc7ec6c0abb6838e
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: http://review.coreboot.org/8528
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Missing parentheses around addition.
==22611== Invalid write of size 8
==22611== at 0x401B26: main (nvramcui.c:146)
==22611== Address 0x5a67c40 is 32 bytes inside a block of size 33 alloc'd
==22611== at 0x4C2BC0F: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==22611== by 0x401AA9: main (nvramcui.c:137)
Change-Id: I9fd6a619dd03ebaaa066bca8fa5838e76374c984
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: http://review.coreboot.org/8527
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Flush out the initial screen window and render the form before the first
keypress. It looks overly weird otherwise and is very likely unintended.
Change-Id: I8700e36e608f2ba115359070f75b7dc9f230291e
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: http://review.coreboot.org/8526
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Test for devno != -1 before trying to access array[devno]
(which may be array[-1]).
Change-Id: Ia69cc7eba0335f02bb0efec003a320a3c0646acb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8509
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=none
BRANCH=none
TEST=none
Change-Id: I56f357db6d37120772a03a1f7f84ce2a5b5620e9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/241855
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Commit-Queue: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/8396
Tested-by: build bot (Jenkins)
Looks like we got our first SoC that actually insists on using
word-sized accesses for its MMIO registers with the Rk3288. This patch
changes the GDB command handler for reading and writing memory to always
perform word-sized accesses. This isn't really perfect since the remote
GDB interface is just not really meant to interact with MMIO (e.g. you
shouldn't use this on something with read side effects), but for most
of our purposes it should be good enough.
BUG=chrome-os-partner:18390
TEST=Remote GDB works on Veyron even when writing MMIO registers.
Original-Change-Id: I2ae52636593499f70701582811f1b692c1ea8fcc
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208554
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 028940934e6b45a02122b61bb859588bf8671938)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4185a6efe9a5211525781acd0a167b821e854211
Reviewed-on: http://review.coreboot.org/8130
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
setbits_le32() is not really arch-specific... the arch-specific part of
accessing memory is wrapped by readl() and writel(), and the endianness
can be accounted for with the right macros. Generalize the definitions,
add a be32 version and move them to endian.h so that all platforms can
use them. Also include endian.h from libpayload.h so we won't update any
payload's old use of the macros (endianness is something useful enough
to always have avalable anyway, and shouldn't clash with other things).
This also fixes a bug where these macros would only be available if
libpayload-config.h had been independently included before.
Also fix a bug with readl() macros on all archs where they refused to
work on const pointers (which they should).
CQ-DEPEND=CL:208712
BUG=None
TEST=Stuff still compiles. Built and booted on Storm.
Original-Change-Id: I01a7fbadbb5d740675657d95c1e969027562ba8c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208713
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 951f8a6d77bc21bd793bf4f228a0965ade586f00)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I51c25f01b200b91abbe32c879905349bb05dc9c8
Reviewed-on: http://review.coreboot.org/8129
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
In cases where timer clock frequency is not an integer number of
megahertz, the calculations in timer_us() lack accuracy.
This patch modifies calculations to reduce the error. The maximum
interval this calculation would support decreases, but it still is in
excess of 1844674 seconds for a timer clocked by 10 MHz, which is more
than enough.
BUG=none
TEST=manual
. verified timer accuracy using a depthcharge CLI command
Original-Change-Id: Iffb323db10e74b0ce3b4d59a56983bfee12e6805
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207358
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit e1abf87d438de1a04714482d5b610671e8cc0663)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia892726187ab040dd235f493c92856c15951cc06
Reviewed-on: http://review.coreboot.org/8128
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Add support:
1)Support driver rktimer
2)Support driver rkserial
BUG=chrome-os-partner:29778
TEST=emerge-veyron libpayload
Original-Change-Id: I2cccedf3b62883dd372842a7972e93f2ebbfb282
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/206184
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 387450d7c36b201bd177d46eb9f1d280fc043aab)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia6b7a8ee2439a6f2bf7577df822d3f4f3a1e441c
Reviewed-on: http://review.coreboot.org/8127
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The current default memcpy first copies single bytes to align the
amount, then copies the rest as full words. In practice, the start of a
buffer is much more likely to be word-aligned then the end, and aligned
word access are usually more efficient. This patch reorders those
accesses to first copy as many full words as possible and then finish
the rest with byte accesses to optimize this common case.
This fixes a data abort when using USB on ARM without CONFIG_GPL. Due to
some limitations of how DMA memory is set up in coreboot on ARM, it
currently does not support unaligned accesses. (This could be fixed with
a more complicated patch, but it's usually not an issue... unless, of
course, your memcpy happens to be braindead).
Also add word-aligned accesses to memset and memcmp while I'm at it, and
make memcmp's return value standard's compliant.
BUG=chrome-os-partner:24957
TEST=Manual
Original-Change-Id: I2a7bcb35626a05a9a43fcfd99eb958b485d7622a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203547
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 05a64d2e107e1675cc3442e6dabe14a341e55673)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0030ca8a203c97587b0da31a0a5e9e11b0be050f
Reviewed-on: http://review.coreboot.org/8126
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add stub implementation for gdb arm64 support. Currently all functions are kept
empty to enable proper compilation of depthcharge and libpayload. As we get more
clear about context management and stuff, we can add details for gdb as well.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I0a8729671ab0764d424c0e3d50af86433d05b1e8
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204877
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit d24e5c26b56a9882b3450b1e4988b56c3d73efd1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9b7d3d7060dd827ef4a46865e0f9a2b4e063d07d
Reviewed-on: http://review.coreboot.org/8125
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds the ability to attach a GDB host through the UART to a
running payload. Libpayload implements a small stub that can parse and
respond to the GDB remote protocol and provide the required primitives
(reading/writing registers/memory, etc.) to allow GDB to control
execution.
The goal of this implementation is to be as small and uninvasive as
possible. It implements only the minimum amount of primitives required,
and relies on GDB's impressive workaround capabilities (such as
emulating breakpoints by temporarily replacing instructions) for the
more complicated features. This way, a relatively tiny amount of code on
the firmware side opens a vast range of capabilities to the user, not
just in debugging but also in remote-controlling the firmware to change
its behavior (e.g. through GDBs ability to modify variables and call
functions).
By default, a system with the REMOTEGDB Kconfig will only trap into GDB
when executing halt() (including the calls from die_if(), assert(), and
exception handlers). In addition, payloads can manually call gdb_enter()
if desired. It will print a final "Ready for GDB connection." on the
serial, detach the normal serial output driver and wait for the commands
that GDB starts sending on attach.
Based on original implementation by Gabe Black <gabeblack@chromium.org>.
BUG=chrome-os-partner:18390
TEST=Boot a GDB enabled image in recovery mode (or get it to hit a
halt()), close your terminal, execute '<toolchain>-gdb --symbols
/build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory
~/trunk/src/third_party/coreboot/payloads/libpayload --directory
~/trunk/src/platform/depthcharge --directory
~/trunk/src/platform/vboot_reference --ex "target remote
<cpu_uart_pty>"' and behold the magic.
(You can also SIGSTOP your terminal's parent shell and the terminal
itself, and SIGCONT them in reverse order after GDB exits. More
convenient wrapper tools to do all this automatically coming soon.)
Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202563
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b
Reviewed-on: http://review.coreboot.org/8119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There have been leaks of GPL code into libpayload for a while now, for
new features or improvements that require third party code with no
adequate alternative among BSD-licensed software. It seems silly and
counter-productive to keep holding back features and performance
improvements from libpayload for a use-case (proprietary payloads) that
doesn't even seem to be implemented anywhere to date. Open-source
payloads should not need to suffer to appease commercial ones.
Instead, this patch introduces a new Kconfig option to explicitly allow
inclusion of GPL code. It will use Kconfig dependencies and/or Makefile
rules to ensure that no GPL code can end up in the final payload if that
option is unset, allowing proprietary payloads to keep working with the
existing BSD-licensed feature set. New features and patches (that are
sufficiently separate and self-contained to allow guarding through this
config option) can choose whether to import GPL code, and need to depend
on this option if they do.
Also clean up all (known) existing uses of GPL code to depend on the new
option, add some recent third-party imports to the LICENSES file, and
relicense the selfboot.c files to BSD with permission of the author.
BUG=chrome-os-partner:24957
TEST=Compiled Falco and Nyan_Big both with and without the new option,
disassembled output binaries to ensure that memcpy() looks as expected.
Original-Change-Id: I6e3a75b1a8e46291c75a876844c7a01f7d3f2a0e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203513
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit d8e5a9fdf583b5ac861f34baea6a16c4d8536512)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I446fef028264c793b946dd9f765e446bf708b4db
Reviewed-on: http://review.coreboot.org/8118
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch makes some slight changes to the exception hook interface.
The old code provides a different handler hook for every exception
type... however, in practice all those hook functions often need to look
very similar, so this creates more boilerplate than it removes. The new
interface just allows for a single hook with the exception type passed
as an argument, and the consumer can signal whether the exception was
handled through the return value. (Right now this still only supports
one consumer, but it could easily be extended to walk through a list of
hooks if the need arises.)
Also move the excepton state from an argument to a global. This avoids a
lot of boilerplate since some consumers need to change the state from
many places, so they would have to pass the same pointer around many
times. It also removes the false suggestion that the exception state was
not global and you could have multiple copies of it (which the exception
core doesn't support for any architecture).
On the ARM side, the exception state is separated from the exception
stack for easier access. (This requires some assembly changes, and I
threw in a few comments and corrected the immediate sigils from '$' to
the official '#' while I'm there.) Since the exception state is now both
stored and loaded through an indirection pointer, this allows for some
very limited reentrance (you could point it to a different struct while
handling an exception, and while you still won't be able to return to
the outer-level exception from there, you could at least swap out the
pointer and return back to System Mode in one go).
BUG=chrome-os-partner:18390
TEST=Made sure normal exceptions still get dumped correctly on both
archs.
Original-Change-Id: I5d9a934fab7c14ccb2c9d7ee4b3465c825521fa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202562
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 97542110f0b385b9b8d89675866e65db8ca32aeb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
*** Squashed to prevent build failures. ***
libpayload: align arm64 with new exception handling model
The exception handling was previously updated, however the
arm64 changes raced with hat one. Make the arm64 align with
the new model. Without these changes compilation will fail.
BUG=None
BRANCH=None
TEST=Can build libpayload for rush.
Original-Change-Id: I320b39a57b985d1f87446ea7757955664f8dba8f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204402
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 0080df41b311ef20f9214b386fa4e38ee54aa1a1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9a0bb3848cf5286f9f4bb08172a9f4a15278348e
Reviewed-on: http://review.coreboot.org/8117
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds a console_kill_output_driver() function, which can
remove a previously registered output driver. This is mostly useful when
you overlay some output channel over another, such as when the GDB stub
takes direct control of the UART (and thus has to get rid of the
existing serial output driver).
BUG=chrome-os-partner:18390
TEST=None
Original-Change-Id: I6fce95c22fd15cd321ca6b2d6fbc4e3902b1eac3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202561
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 87680a246429d24e99b7b477b743c357f73b752c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I50001cee4582c962ceedc215d59238867a6ae95a
Reviewed-on: http://review.coreboot.org/8116
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds a UART driver for the ipq8064 controller. It still does not
quite work in the receive direction - the receive FIFO returns read
data in 32 bit chunks, which means that 4 keys need to be pressed
before a character pops out of the driver (and it reports it as a
single character).
This issue is being addressed separately, the driver is being checked
in to facilitate concurrent development.
BUG=chrome-os-partner:27784, chrome-os-partner:29313
TEST=with deptcharge modifications in place, the AP148 board comes up
to the depthcharge prompt:
Starting depthcharge on storm...
Original-Change-Id: Ief2cfcca73494be5c4147881144470078adcefb8
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202045
Original-Reviewed-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 4499318fb9a4e663c504d7c41380ccf2aa89da29)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3e07d7568c20c0e570222971ff219de3a6d9b7cc
Reviewed-on: http://review.coreboot.org/8061
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some drivers being ported to depthcharge use io bit manipulation
macros. The libpayload include file seems the most appropriate place
to keep these macros in. There is no common io.h file across
architectures, the x86 version could be added later if required.
BUG=chrome-os-partner:27784
TEST=observed ipq806x SPI driver deptcharge port (WIP) compile properly.
Original-Change-Id: I33f3be072faefce293c871f7e3bc3b2e6bc38ffe
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202559
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
(cherry picked from commit ad18a605b4d0ec3251c1614e7358b42aa6b5c45a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8656e12af20ce4cf11d771942e8fe7d4eb2a560d
Reviewed-on: http://review.coreboot.org/8062
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds some assembly code to clear .bss segment. It might have been
already cleared by the loader, but it is not guaranteed. This also
helps when the program is loaded by the debugger.
BUG=none
TEST=observed that .bss is now initialized when the program is
restarted. Verified correct boundaries of the segment.
Original-Change-Id: I0aed0070da53881e4cf8c27049459040c006e765
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201784
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
(cherry picked from commit c89ecee5ddfc33a438d4d1926d3756a48f3c2576)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic0c33d2a8ad22cd23b3ccb73c603cb14ae2aab29
Reviewed-on: http://review.coreboot.org/8060
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Libpayload libc requires timer clock frequency to be at least 1MHz.
Ipq8064 code presently provides a single option of 32kHz. Pretend to
be running at 1 MHz without additional accuracy.
This is a hack which will be reverted as soon as the SOC is configured
to supply a faster running clock.
BUG=chrome-os-partner:27784, chrome-os-partner:28880
TEST=with other changes depthcharge boots to the CLI console
Original-Change-Id: I80ec6652bc5693a549668cd6e824e9cf5c26b182
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201342
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 466a59967b13986099106f8b44924648c1e6e6cd)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I113689191db70710e7a45ccd02d672f482343e35
Reviewed-on: http://review.coreboot.org/8004
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The earlier compilation warning fix (chromium 7e4aa17) incorrectly
assumed that selfboot() is a function defined in the cbfs driver.
This is a commonly available function, it should not come from cbfs.h.
BUG=none
TEST=the following build command succeeds:
rambi storm nyan_big
Original-Change-Id: I3ef49d849168ad9dc24589cbd9ce7382052345bd
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201386
(cherry picked from commit d5090e8410530f41b9fd33e2caa1d8aa25438105)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8404fb52112b391982f954a6d06fe4b451dfcb8a
Reviewed-on: http://review.coreboot.org/8003
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
This is still using the 32kHz timer coreboot uses. A finer granularity
timer implementation for 806x is in the works.
BUG=chrome-os-partner:27784,chrome-os-partner:28880
TEST=none yet.
Original-Change-Id: Iae206749000d45040090df48199c8d86d76bbae5
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/198021
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 8f49f752ab8f84b7c5dc189238732360e8d2aae2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia150c974e5b66939de0b007cf7c1308c187f3289
Reviewed-on: http://review.coreboot.org/8002
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
With commands typically shorter than the buffer they're
copied to, copy cmdlen bytes, cut off by the buffer limit.
Change-Id: Ia9d2663bd145eff4538084ac1ef8850cfbcea924
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/7977
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
ARM processors save the PC value in the Link Register when they handle
and exception, but they store it with an added offset (depending on the
exception type). In order to make crashes easier to read and correctly
support more complicated handlers in libpayload, this patch adjusts the
saved PC value on exception entry to correct for that offset.
(Note: The value that we now store is what ARM calls the "preferred
return address". For most exceptions this is the faulting instruction,
but for software interrupts (SWI) it is the instruction after that. This
is the way most programs like GDB expect the stored PC address to work,
so let's leave it at that.)
Numbers taken from the Architecture Reference Manual at the end of
section B1.8.3.
BRANCH=none
BUG=chrome-os-partner:18390
TEST=Provoked a data abort and an undefined instruction in both coreboot
and depthcharge, confirmed that the PC address was spot on.
Original-Change-Id: Ia958a7edfcd4aa5e04c20148140a6148586935ba
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199844
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 4a914d36bb181d090f75b1414158846d40dc9bac)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib63ca973d5f037a879b4d4d258a4983160b67dd6
Reviewed-on: http://review.coreboot.org/7992
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Make sure the build breaks in case of warnings.
BUG=none
TEST= All builds succeed with the restored patch and fail when a
compilation warning is thrown.
Original-Change-Id: I9bdcd8938f59913e4ba86df5e4921b3f821ef920
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/200110
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 16dde875950d6806cc770cdbee4d3ff456ed6f02)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I86988f8d3f1acaa6ceeabdcbfa3cede1e67c28fe
Reviewed-on: http://review.coreboot.org/7911
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Fix pointer related casts since this can create a problem for 64-bit systems.
BUG=None
BRANCH=None
TEST=Compiled successfully for link, nyan using emerge-* libpayload
Original-Change-Id: I4cbd2d9f1efaaac87c3eba69204337fd6893ed66
Original-Reviewed-on: https://chromium-review.googlesource.com/199564
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 914b118a64b0691aeca463dff24252db9c24109e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I11f070ed5d3eddd8b9be30c428cb24c8439e617b
Reviewed-on: http://review.coreboot.org/7905
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
xHCI Spec says TD Size (5 bits) field shall be forced to 31,
if the number of packets to be scheduled is greater than 31.
BUG=chrome-os-partner:27837
BRANCH=rambi,nyan
TEST=Manual: Ensure recovery boot with USB 2.0 media on Squawks
works fine without any babble errors.
Original-Change-Id: Iff14000e2a0ca1b28c49d0da921dbb2a350a1bbd
Original-Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Original-Originally-Reviewed-on: https://chromium-review.googlesource.com/202297
Original-Reviewed-on: https://chromium-review.googlesource.com/202330
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Tested-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit ae58b99370df3a86bf15d84b97db858a968b1dbd)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9668b947f676c109fad9297e5efde91bf7f796fd
Reviewed-on: http://review.coreboot.org/7913
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
When emerging libpayload a warning is generated about selfboot() being
defined without a prior prototype.
Add cbfs.h when CBFS use if compiled fixes the warning.
BUG=none
TEST=build rambi storm nyan_big
verify that there is no compilation warnings thrown any more
Original-Change-Id: Ic9cb5571f708bb006a0d477e451fd1f3b3eb833f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/200099
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 7e4aa17936b70dd08f58b3a55c6db55ea03709d7)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie3baaaca82fb6ec432860c638acb2a3ef9451469
Reviewed-on: http://review.coreboot.org/7909
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
The calling convention of payload entry function is different by architecture.
For example, X86 takes no arguments and ARM needs first param to be a
cb_header_ptr*.
To help payloads load and execute other payloads easily and correctly, we should
provide the selfboot() function in libpayload, using same prototype as defined
in coreboot environment.
BUG=none
TEST=emerge-nyan libpayload # pass
BRANCH=none
Original-Change-Id: I8f1cb2c0df788794b2f6f7f5500a3910328a4f84
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199503
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 1e916cf021ce68886eb9668982c392eadedc7b7e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7279ef27f49ef581d25a455dd8f1f2f7f1ba58cb
Reviewed-on: http://review.coreboot.org/7907
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
The -z "${V}" sure must have meant to be -n "${V}", but come to think
of it, this check is not necessary, as the following check will
succeed if and only if V is set to 1.
BUG=none
TEST=verified that adding V=1 to the environment causes the lpgcc
debug statements to show up in the output.
Original-Change-Id: I1eb43ef49aeb4f16aef4fbee3a1037e853f9b40f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/200501
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Marc Jones <marc.jones@se-eng.com>
(cherry picked from commit 7d69a292b1dc90e68e539e329f019098f8af5007)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I63785fd9fc88b95d50ecced1f4f74a76ca68089c
Reviewed-on: http://review.coreboot.org/7912
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Seems that the 'if (cursor_enabled)' check in
video_console_fixup_cursor() that was removed in chromium.org 1f880bca0 really
meant to check for 'if (console)'. Looks like the whole video console
driver is built extra robust to not fail no matter how screwed up the
console is, so let's add this missing check here as well. Also fixed up
a few other missing 'if (!console)' checks while I'm at it.
However, what payloads should really be doing is check the return value
of video_(console_)init() and not call the other video functions if that
failed. This also adapts video_console_init() to correctly pass through
the return value for that purpose (something that seems to have been
overlooked in the dd9e4e58 refactoring).
BUG=chrome-os-partner:28494
TEST=None. I don't know what Dave did to trigger this in the first
place, but it's pretty straight-forward.
Original-Change-Id: I1b9f09d49dc70dacf20621b19e081c754d4814f7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/200688
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 3f01d1dc0974774f0b3ba5fc4e069978f266f2fc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I98c1d8360539b457e6df07cbcf799acaf6c4631b
Reviewed-on: http://review.coreboot.org/7910
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
The keyboard.c uses IO cycles to access the legacy PC keyboard device.
ARM can't do IO cycles, so remove the option for ARM configs.
Change-Id: Ifc6c2368563f27867f4babad5afdde0e78f4cf78
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7922
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There were a few build warnings in the USB driver to clean
up before -Werror may be enabled.
Change-Id: I220cfcf0ee926912a184a91d3ced3ba61259130e
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7921
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
The video console runs a video_console_fixup_cursor() function after
every printed character to make sure the cursor is still in the output
window and avoid overflows. For some crazy reason, this function does
not run when cursor_enabled is false... however, that variable is only
about cursor *visibility*, and it's imperative that we still do proper
bounds checking for our output even if the cursor itself doesn't get
displayed (otherwise we can end up overwriting malloc cookies that cause
a panic on the next free() and other fun things like that).
In fact, there seems to be no reason at all to even keep track of the
cursor visibility state in the generic video console framework (the
specific backends already do it, too), so let's remove that code
entirely. Also set the default cursor visibilty in the corebootfb
backend to 0 since that's consistent with what the other backends do.
BUG=None
TEST=Turn on video console on Big, generate enough output to make it
scroll, make sure it does not crash.
Original-Change-Id: I1201a5bccb4711b6ecfc4cf47a8ace16331501b4
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196323
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 1f880bca06ed0a3f2c75abab399d32a2e51ed10e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6c67a9efb00d96fcd67f7bc1ab55a23e78fc479e
Reviewed-on: http://review.coreboot.org/7908
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Some EABI conformant toolchains like GCC need additional functions like raise.
To prevent payloads adding arch-specific implementations everywhere, we should
provide the default version in libpayload.
BUG=none
TEST=emerge-nyan libpayload # pass
BRANCH=none
Original-Change-Id: Id1e3c29590aa5881aefd944a7551949ce9a47b8f
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199686
(cherry picked from commit 395810c4b744dbb720050f79a2c1a30e81464554)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2e1d8c8cb519f8e788c22d081132d23b49b8f822
Reviewed-on: http://review.coreboot.org/7906
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
I always thought the support for multiple logical SCSI units in the USB
mass storage class was a dead feature. Turns out that it's actually used
by SD card readers that provide multiple slots (e.g. one regular sized
and one micro-SD). Implementing perfect support for that would require a
major redesign of the whole MSC stack, since the one device -> one disk
assumption is deeply embedded in our data structures.
Instead, this patch implements a poor man's LUN support that will just
cycle through all available LUNs (in multiple calls to usb_msc_poll())
until it finds a connected device. This should be reasonable enough to
allow these card readers to be usable while only requiring superficial
changes.
Also removes the unused 'protocol' attribute of usb_msc_inst_t.
BRANCH=rambi?,nyan
BUG=chrome-os-partner:28437
TEST=Alternatively plug an SD or micro-SD card (or both) into my card
reader, confirm that one of them is correctly detected at all times.
Original-Change-Id: I3df4ca88afe2dcf7928b823aa2a73c2b0f599cf2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/198101
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 960534a20e4334772c29355bb0d310b3f41b31ee)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I39909fc96e32c9a5d76651d91c2b5c16c89ace9e
Reviewed-on: http://review.coreboot.org/7904
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
So I was debugging this faulty USB SD card reader that would just fail
it's REQUEST SENSE response for some reason (sending the CSW immediately
without the data), cursing those damn device vendors for building
non-compliant crap like I always do... when I noticed that we do not
actually set the Allocation Length field in our REQUEST SENSE command
block at all! We set a length in the CBW, but the SCSI command still has
its own length field and the SCSI spec specifically says that the device
has to return the exact amount of bytes listed there (even if it's 0). I
don't know what's more suprising: that we had such a blatant bug in this
stack for so long, or that this card reader is really the first device
to actually be spec compliant in that regard.
This patch fixes the bug and changes the command block structures to be
a little easier to read (why that field was called 'lun' before is
beyond me... LUN is a transport level thing and should never appear in
the command block at all, for any command). It also fixes a memcpy() in
wrap_cbw() to avoid a read buffer overflow that might expose stack frame
data to the device.
BRANCH=rambi?,nyan
BUG=chrome-os-partner:28437
TEST=The card reader works now (for it's first LUN at least).
Original-Change-Id: I86fdcae2ea4d2e2939e3676d31d8b6a4e797873b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/198100
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 88943d9715994a14c50e74170f2453cceca0983b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3097c223248c07c866a33d4ab8f3db1a7082a815
Reviewed-on: http://review.coreboot.org/7903
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We recently changed the USB stack to detach devices aggressively that we
don't intend to use. This alone is not really a problem, but it
exarcerbates the fact that our device detachment itself is not very
good. We destroy any local info about the device, but we don't properly
disable the offending port. The device keeps thinking that it's active,
and if we later try to reuse that device address for another device
things become confused.
The real fix would be to properly disable all ports that we don't intend
to use. Unfortunately, this isn't really possible in our current
device/hub polymorphism structure, and I don't want to hack a new
disable_port() callback into usbdev_t that really doesn't belong there.
We will only be able to fix this cleanly after we ported all root hubs
to the generic_hub interface.
Until then, an easy workaround is to just avoid reusing addresses as
long as possible. This is firmware, so the chance that we'll ever run
through 127 devices is really small in practice. Even if we ever fix the
underlying issue, it's probably a smart precaution to keep.
BRANCH=nyan,rambi
BUG=chrome-os-partner:28328
TEST=Boot from a hub that has an "unknown" device in an earlier port
than the stick you want to boot from, make sure you can still boot.
Original-Change-Id: I9b522dd8cbcd441e8c3b8781fcecd2effa0f23ee
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197420
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 28b48aa69b55a983226edf2ea616f33cd4b959e2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id4c5c92e75d6b5a7e8f0ee3e396c69c4efd13176
Reviewed-on: http://review.coreboot.org/7881
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The console output driver framework in libpayload is currently built on
the putchar primitive, meaning that every driver's function gets called
one character at a time. This becomes an issue when we add drivers that
could output multiple characters at a time, but have a high constant
overhead per invocation (such as the planned GDB stub, which needs to
wrap a special frame around output strings and wait for an
acknowledgement from the server).
This patch adds a new 'write' function pointer to the
console_output_driver structure as an alternative to 'putchar'. Output
drivers need to provide at least one of the two ('write' is preferred if
available). The CBMEM console driver is ported as a proof of concept
(since it's our most performace-critical driver and should in theory
benefit the most from less function pointer invocations, although it's
probably still negligible compared to the big sprawling mess that is
printf()).
Even with this fix, the problem remains that printf() was written with
the putchar primitive in mind. Even though normal text already contains
an optimization to allow multiple characters at a time, almost all
formatting directives cause their output (including things like
padding whitespace) to be putchar()ed one character at a time.
Therefore, this patch reworks parts of the output code (especially
number printing) to all but remove that inefficiency (directives still
invoke an extra write() call, but at least not one per character). Since
I'm touching printf() core code anyway, I also tried to salvage what I
could from that weird, broken "return negative on error" code path (not
that any of our current output drivers can trigger it anyway).
A final consequence of this patch is that the responsibility to prepend
line feeds with carriage returns is moved into the output driver
implementations. Doing this only makes sense for drivers with explicit
cursor position control (i.e. serial or video), and things like the
CBMEM console that appears like a normal file to the system really have
no business containing carriage returns (we don't want people to
accidentally associate us with Windows, now, do we?).
BUG=chrome-os-partner:18390
TEST=Made sure video and CBMEM console still look good, tried printf()
with as many weird edge-case strings as I could find and compared serial
output as well as sprintf() return value.
Original-Change-Id: Ie05ae489332a0103461620f5348774b6d4afd91a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196384
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit ab1ef0c07736fe1aa3e0baaf02d258731e6856c0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I78f5aedf6d0c3665924995cdab691ee0162de404
Reviewed-on: http://review.coreboot.org/7880
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
`*memory` is not changed in `hexdump()` and just read so make it
`const`.
Change-Id: I9504d25ab5c785f05c39c9a4f48c21f68659a829
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5403
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
If a payload decides not to use a USB device then the device can be
detached. This prevents the device from interfering with normal
operation on some platforms. Also, it aligns the behavior of
usb_generic_init with class-specific init functions such as
usb_msc_init, which will detach unsupported devices.
BUG=None
TEST=Manual on Squawks. Test recovery boot w/ USB 2.0 media, verify
that media boots and no babble error is encountered.
BRANCH=rambi
Change-Id: I8fb30951d273e4144cda214a30a2e86df90f2c1c
Original-Change-Id: Iee522344558749603defb2966e18765aa195dae2
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/195401
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit f7778ace68c9bee8dfab2b263e5dd054fc50c3bb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7830
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Turns out that when you clear 28 bits starting with bit 3, you leave bit
31 standing. Ooops...
This shouldn't really matter since that bit is reserved/SBZ in CLIDR
anyway, but it's still nice to fix it. This whole thing should really be
an AND for clarity anyway in my opinion.
Bug found in upstream NetBSD (who would've thought...).
BUG=None
TEST=Still boots.
Change-Id: Ic826e82d58fd1ce984971afea3dfa9296f746d9f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193300
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d270c0ec18b74b272451c456cbf07e99d95896cb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7745
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
TEST=Booted nyan in normal and recovery mode. Created a map, filled it with some
chars, then verified they can be read from the pointer returned.
BUG=chrome-os-partner:25587
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Id1f1be4f6d2d5734d87bf3452d4806d0fe3fda88
Original-Reviewed-on: https://chromium-review.googlesource.com/188894
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 7fda3885f51c8d383585a80e99ab3df9c789d872)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6255d11396c87f40b0ae12ceab0fd152f2478529
Reviewed-on: http://review.coreboot.org/7658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Use the SPSR to extract and inject CPSR values when an exception happens and
pass that information to exception hooks.
The register structure GDB expects when using its remote protocol has a spot
for the CPSR.
BUG=None
TEST=Built and booted on link, nyan.
BRANCH=None
Original-Change-Id: Id950fb09d72fb0f81e4eef2489c0849ce5dd8aca
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/180253
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8e7014f24a580f84c91fa7b0369dfa922918adcc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I49357fb6a65edeff7a9a48d54254308a6b0efdb7
Reviewed-on: http://review.coreboot.org/7657
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
To support a GDB stub, it will be necessary to trap various exceptions which
will be used to implement breakpoints, single stepping, etc.
BUG=None
TEST=Built and booted on Link with hooks installed and saw that they
triggered when exceptions occurred. Built and booted on nyan.
BRANCH=None
Original-Change-Id: Iab659365864a3055159a50b8f6e5c44290d3ba2b
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/179602
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8db0897b1ddad600e247cb4df147c757a8187626)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5e7f724b99988cd259909dd3bd01166fa52317ec
Reviewed-on: http://review.coreboot.org/7656
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
To find the coreboot tables, the payload has historically searched for their
signature in a predefined region of memory. This is a little clumsy on x86,
but it works because you can assume certain regions are RAM. Also, there are
areas which are set aside for the firmware by convention. On x86 there's a
forwarding entry which goes in one of those fairly small conventional areas
and which points to the CBMEM area at the end of memory.
On ARM there aren't areas like that, so we've left out the forwarding entry and
gone directly to CBMEM. RAM may not start at the beginning of the address space
or go to its end, and that means there isn't really anywhere fixed you can put
the coreboot tables. That's meant that libpayload has to be configured on a
per board basis to know where to look for CBMEM.
Now that we have boards that don't have fixed amounts of memory, the location
of the end of RAM isn't fixed even on a per board level which means even that
workaround will no longer cut it.
This change makes coreboot pass the location of the coreboot tables to
libpayload using r0, the first argument register. That means we'll be able to
find them no matter where CBMEM is, and we can get rid of the per board search
ranges.
We can extend this mechanism to x86 as well, but there may be more
complications and it's less necessary there. It would be a good thing to do
eventually though.
BUG=None
TEST=Built and booted on nyan. Changed the size of memory and saw that the
payload could still find the coreboot tables where before it couldn't. Built
for pit, snow, and big.
BRANCH=None
Original-Change-Id: I7218afd999da1662b0db8172fd8125670ceac471
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185572
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ca88f39c21158b59abe3001f986207a292359cf5)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iab14e9502b6ce7a55f0a72e190fa582f89f11a1e
Reviewed-on: http://review.coreboot.org/7655
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There are four other approaches to provide UEFI on
top of coreboot that actually get to a UEFI shell.
No need to keep this experiment and confuse users.
Change-Id: I81c52e24099852f6daf0d5725aec707bdfd75ae1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7622
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This patch changes the ENTRY() macro in asm.h to create a new section
for every assembler function, thus providing dcache_clean/invalidate_all
and friends with the same --gc-sections goodness that our C functions
have. This requires a few minor changes of moving around data (to make
sure it ends up in the right section) and changing some libgcc functions
(which apparently need to have two names?), but nothing serious.
(You may note that some of our assembly functions have data, sometimes
even writable, within the same .text section. This has been this way
before and I'm not looking to change it for now, although it's not
totally clean. Since we don't enforce read-only sections through paging,
it doesn't really hurt.)
BUG=None
TEST=Nyan and Snow still boot. Confirm dcache_invalidate_all is not
output into any binary anymore since no one actually uses it.
Original-Change-Id: I247b29d6173ba516c8dff59126c93b66f7dc4b8d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/183891
(cherry picked from commit 4a3f2e45e06cc8592d56c3577f41ff879f10e9cc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieaa4f2ea9d81c5b9e2b36a772ff9610bdf6446f9
Reviewed-on: http://review.coreboot.org/7451
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This creates a new PL011 config variable which avoids the
infinite busy wait on serial_putchar() because the register
mapping is not compatible with current implementation.
BUG=None
BRANCH=none
TEST=printf() works on the PL011 based ARMv8 foundation model
Original-Change-Id: I9feda35a50a3488fc504d1561444161e0889deda
Original-Signed-off-by: Marcelo Povoa <marcelogp@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/187020
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 85779a34a161c324cc8af995ada4393137275f20)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Conflicts:
payloads/libpayload/Config.in
payloads/libpayload/drivers/serial.c
Change-Id: I23c8b3728cd7d2d7692b3e86a679e061e88f7bb5
Reviewed-on: http://review.coreboot.org/7422
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
These drivers are needed right away and never really fit into depthcharge's
driver model anyway.
CQ-DEPEND=CL:194064
BUG=None
TEST=Built and booted nyan, link, and peach_pit and verified that timer values
in cbmem were reasonable. Built for nyan_big, nyan_blaze and daisy.
BRANCH=None
Original-Change-Id: Ia7953cfece57524262a6c7d6537082af7a00f4d6
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194058
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit f30a410f0a248c93bc34f5868af1596bf8ce3cdd)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I782d20f3cd63210a87c712643c7a53753f5ef301
Reviewed-on: http://review.coreboot.org/7225
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
We've recently fixed a problem where an external hard drive would choke
due to one too many CLEAR_FEATURE(HALT) commands in the XHCI stack with
"libpayload: usb: xhci: Fix STALL endpoint handling". Clearing stall
conditions from within the transfer function is wrong in general... this
is really something that is host controller agnostic and should be left
to the higher-level driver to decide. The mass storage driver (the only
one that should really encounter stalls right now) already contains the
proper amount of clear_stall() calls... any more than that is redundant
and as we found out potentially dangerous.
This patch removes automatic clear stalls from UHCI and OHCI drivers as
well to make things consistent between host controllers.
BUG=chromium:192866
TEST=None. I could borrow the original hard drive from Shawn and compile
a Snow to only use the OHCI driver to reproduce/verify this, but alas, I
am lazy (and it's really not that important).
Original-Change-Id: Ie1e4d4d2d70fa4abf8b4dabd33b10d6d4012048a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/193732
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit d46e183f3e7e0b0130becdefa6fd3ef8097df54b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie8f4ab3db8ec0d9a2d1e91c62967833e59c46700
Reviewed-on: http://review.coreboot.org/7223
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This patch combines a few minor fixes and refactoring to the various
host controller and root hub drivers to ensure they all do the right
thing on a call to usb_exit(). It puts a usb_detach_device(0) call
into detach_controller() so that the HCD doesn't need to remember to
tear down the root hub itself, and makes sure all root hubs properly
detach the subtree of devices connected to their ports first (as
generic_hub and by extension XHCI had already been doing).
It also fixes up some missing free() calls and replaces most 'ptr =
malloc(); if (!ptr) fatal()' idioms with the new x(z)alloc().
BUG=chromium:343415
TEST=Tested EHCI on Big and OHCI, EHCI, and XHCI on Snow. Could not test
UHCI (unless anyone volunteers to port coreboot to a ZGB? ;) ), but the
changes are really tame.
Original-Change-Id: I6eca51ff2685d0946fe4267ad7d3ec48ad7fc510
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/193731
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 5791b546e5a21a360d0c65888a5b92d5f48f8178)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I00138f0aeceb12ed721f7368c7788c9b6bee227d
Reviewed-on: http://review.coreboot.org/7222
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
config.panther was added in a chromium upstream patch. We don't
want mainboard specific configs in libpayload, so remove it.
Change-Id: Ibfb894a0262911c13e88bc161749b78e2b5c5185
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7450
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Update x86 and ARM defconfig. Adds default N to specific timer
and serial drivers.
Change-Id: Ida6b953565dc6053729c2a72c6342d86596c599b
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7449
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This patch changes several cache-related pieces to be cleaner, faster or
more correct. The largest point is removing the old
arm_invalidate_caches() function and surrounding bootblock code to
initialize SCTLR and replace it with an all-assembly function that takes
care of cache and SCTLR initialization to bring the system to a known
state. It runs without stack and before coreboot makes any write
accesses to be as compatible as possible with whatever state the system
was left in by preceeding code. This also finally fixes the dreaded
icache bug that wasted hundreds of milliseconds during boot.
Old-Change-Id: I7bb4995af8184f6383f8e3b1b870b0662bde8bd4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/183890
(cherry picked from commit 07a35925dc957919bf88dfc90515971a36e81b97)
nyan_big: apply cache-related changes from nyan
This applies the same changes from 07a3592 that were applied to nyan.
Old-Change-Id: Idcbe85436d7a2f65fcd751954012eb5f4bec0b6c
Reviewed-on: https://chromium-review.googlesource.com/184551
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4af27f02614da41c611aee2c6d175b1b948428ea)
Squashed the followup patch for nyan_big into the original patch.
Change-Id: Id14aef7846355ea2da496e55da227b635aca409e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
(cherry picked from commit 4cbf25f8eca3a12bbfec5b015953c0fc2b69c877)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/6993
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These drivers need to be ready right away and never really fit into the
depthcharge driver model anyway.
CQ-DEPEND=CL:194063
BUG=None
TEST=Built and booted on nyan and peach_pit. Built for nyan_big, nyan_blaze,
and daisy.
BRANCH=None
Original-Change-Id: I9570dee53c57d42ef4cd956f66a878ce39a2dc20
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194057
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 26e18f680c93fc990a3d1057c164f19859634a9f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia2233e2bd821d8de8d2d57a9423aeb74be7efd93
Reviewed-on: http://review.coreboot.org/7224
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This patch switches every last part of Coreboot on ARM over to Thumb
mode: libpayload, the internal libgcc, and assorted assembly files. In
combination with the respective depthcharge patch, this will switch to
Thumb mode right after the entry point of the bootblock and not switch
back to ARM until the final assembly stub that jumps to the kernel.
The required changes to make this work include some new headers and
Makefile flags to handle assembly files (using the unified syntax and
the same helper macros as Linux), modifying our custom-written libgcc
code for 64-bit division to support Thumb (removing some stale old files
that were never really used for clarity), and flipping the general
CFLAGS to Thumb (some more cleanup there as well while I'm at it).
BUG=None
TEST=Snow and Nyan still boot.
Original-Change-Id: I80c04281e3adbf74f9f477486a96b9fafeb455b3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/182212
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 5f65c17cbfae165a95354146ae79e06c512c2c5a)
Conflicts:
payloads/libpayload/include/arm/arch/asm.h
src/arch/arm/Makefile.inc
src/arch/arm/armv7/Makefile.inc
*** There is an issue with what to do with ramstage-S-ccopts, and
*** will need to be covered in additional ARM cleanup patches.
Change-Id: I80c04281e3adbf74f9f477486a96b9fafeb455b3
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/6930
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The build directory got removed while my patch was in flight and I
didn't notice when I submitted it.
The uppermemory change was added in
commit 4d7d25f38a - http://review.coreboot.org/#/c/6364
The output directory was changed for everything else in
commit ab11a6a94c - http://review.coreboot.org/#/c/6460
Change-Id: Ib8311f694280d305e826adbb76e3e7b722b30e0f
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7298
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds the 10ms TRSTRCY delay between a reset and the following
Set Address command that is required by the USB 2.0 specification to the
EHCI root hub driver. The generic_hub driver that's used for XHCI and
external hubs already included this delay. This is such a glaring
violation of the spec that I'm really amazed how many USB 2.0 devices
we tested before seemed perfectly fine with responding to a Set Address
within 2 microframes of the reset...
It also increases the port reset hold delay by one millisecond to avoid
an ugly race condition on Tegra SoCs: they decided to time the 50ms
themselves instead of relying on the CPU to do it (fair enough), and to
automatically transition Port Reset to 0 and Port Enable to 1 after that
(bad idea). If the CPU's read-modify-write to clear Port Reset races
exactly with the host controller setting Port Enable, we may end up
clearing the bit again and going into the companion controller handoff
path later on. The added millisecond shouldn't cause any problems for
other host controllers and is not a big deal compared to other delays in
this code path.
BUG=chrome-os-partner:26749
TEST=Run several dozen reboot loops with The USB Stick of Death (TM) (a
blue Patriot XT 13fe:5200 with bcdDevice = 1.00), make sure it always
gets detected correctly.
Original-Change-Id: Idd3329ae6d7e5e1c07a84a5475549b3459836b31
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/189872
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Jim Lin <jilin@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 4deca38e9d79f6373f4418fcaf51a6945232c8b8)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I68a29bfd2e0f30409fbfc330b2575f0f9f61a79d
Reviewed-on: http://review.coreboot.org/7221
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch enables the OHCI driver to use DMA memory, which is necessary
for ARM systems where DMA devices are not cache coherent. I really only
need this to test some later OHCI changes, but it was easy enough...
copied almost verbatim from ehci.c.
Change-Id: Ia717eef28340bd6182a6782e83bfdd0693cf0db1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193730
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit e46b6ebc439e86a00e13bf656d60cf6c186a3777)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7010
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Remove the call to clear_stall in xhci_reset_endpoint because we will
call clear_stall from the mass-storage driver.
- Remove the xhci_reset_endpoint call from xhci_bulk on STALL since we
will reset on the next transfer anyway.
- Remove the clear_halt parameter from xhci_bulk since it's now unused.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I852b87621861109e596ec24b78a8f036d796ff14
Reviewed-on: https://chromium-review.googlesource.com/192866
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit e67e4f0545cbdc074328c83c7edccf9e712cd7be)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7011
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
libpayload's kconfig is totally incompatible with other kconfig versions,
today. Using other versions just doesn't work any more, so don't use the
overridable $(obj)/util/kconfig path. Choose a path that reflects the
incompatibility: $(obj)/util/lp_kconfig, instead.
This whole every-(sub)project-has-it's-own-patched-kconfig-version makes
me really, really sad :'-(
Change-Id: I964772f3323dc20aa7c1cc26a384a2fbca1dbb5e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/7061
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I9b80b72de96fb28489dcc8547b8f748ea4fcc355
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/7074
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Patrick Georgi <pgeorgi@google.com>
If a port is connected before and after an xhci controller reset, the
PORTSC CSC bit may not be asserted. Add an additional check in
xhci_rh_port_status_changed for the PRC bit so we can correctly handle
ports in such a state.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I2d623aae647ab13711badd7211ab467afdc69548
Reviewed-on: https://chromium-review.googlesource.com/189394
Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit ee7c3ea182b35bb6ce3c62f301c4515714f6e654)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7002
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The generic roothub reset port function is overly broad and does some
things which may be undesirable, such as issuing multiple resets to a
port if the reset is deemed to have finished too quickly. Remove the
generic function and replace it with a controller-specific function,
currently only implemented for xhci.
Change-Id: Id46f73ea3341d4d01d2b517c6bf687402022d272
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/189495
Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 54e1da075b0106b0a1f736641fa52c39401d349d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7001
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Pass -ggdb3 to the compiler when building libpayload, -ggdb so that it uses
"the most expressive format available", and 3 so that the debugging level is
set to 3, the highest value currently supported. The debugging information can
be stripped by the payload consuming the library, and will definitely be
stripped by cbfstool when installing that payload into an image.
Change-Id: Ifd6c4a928fbb0b9fa9b3b2e0ea298abff31baf3b
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/180252
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit dc04daaf099c53c57508b66e08f40945345a56ca)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6980
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This patch fixes the remaining few bugs in our shiny new cache iteration
by set/way/level algorithm to actually make it work: It makes it start
from cache level 0 (previously it would always start at LoC and be
"done" instantly), fixes up the two shifts that isolate the set bits at
the end (which didn't seem to account for the fact that the first shift
affects the second), and throws an S bit on that last shift so that it
actually affects the conditionals after it.
In addition, also moves the next_level block to the top so that we can
share (and thus eliminate) some code at initialization, and turns the
whole thing into a thrice-instantiated macro to create functions that
fit our existing interface.
Change-Id: I1338a589cbb37d74ea6e7a3d4f67ff827e24edbe
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/183879
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 6d94f8330191c316fe093ddb5288329453da8a4b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6932
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This patch adds another cache invalidation stub to the x86 arch to
make it usable in common code. This whole stuff should probably be
redesigned anyway but I just want to get it working and unblock my CL
for now... more cleanups coming later.
Change-Id: I2e8bdd8aa0e6723209384c24042f053f2e993fe6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182534
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit cafce5182a7a2a9ce17ad40d9d893a40ebd5aafd)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6919
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The memcpy/memset/memmove assembly implementations have been taken from
U-Boot, which originally got them from Linux. I turns out that they are
actually not that bad, but they could use an update. This patch pulls in
the current Linux upstream versions of those files, removing some old
U-Boot cruft such as checking whether the two pointers in a memcpy() are
equal (really now?) or side-stepping the R8 register because it was used
for special purposes. It also returns to the good old Linux
ENTRY/ENDPROC macros since we have them now anyway, and straightens out
the W() macro in preparation for unified thumb support.
Change-Id: I138af269b423bef0a237759ac29f1ee58ca206a0
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182179
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 777127997bde5785b21d422d0b6eb04c4328b478)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6918
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
libgcc/macros.h contains some useful assembly macros that are common in
Linux kernel code and facilitate things such as unified ARM/THUMB
assembly. This patch moves it to a more general place where it can be
used by other code as well.
Change-Id: If68e8930aaafa706c54cf9a156fac826b31bb193
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182178
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit a780670def94a969829811fa8cf257f12b88f085)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6917
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This is needed by depthcharge on ARM if coreboot is loading its
ramstage from the RW section of the ROM.
Change-Id: I96c6c04a0cee39854b45f2eda169e93461da0694
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/176757
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit cf26be4cb527b0fc4212d401a8c77ceb1c7992d0)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6906
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This functionality is already available for ARM, so lets add it to x86 as
well. We'll want to be able to hook exceptions when running as a remote GDB
target.
Change-Id: I42f640b08eb9eb86a1bcab3c327f7780191a2eb5
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/179601
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 5b8cf0c9f70a7e14766a2b095e6739a8d6321a34)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6898
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This function returns the number of microseconds scaled from the number of raw
timer ticks. It accepts a base parameter which is subtracted from the current
time, which makes it easy to keep track of relative times.
Change-Id: I55f2f9e90c0e12cda430bbe88b044f12b0b563c8
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/179600
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4dd549e18d170dbf918c5b4b11bbe1f4e99b6695)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6897
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The xmalloc wrapper checks whether the malloc succeeded, and if not stops
execution and prints a message. xmalloc always returns a valid pointer. The
xzalloc wrapper does the same thing, but also zeroes the memory before
returning it.
Old-Change-Id: I00e7de04a5c368ab3603530b98bd3e3596e10632
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/178001
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4029796d4f66601e33ae3038dbfc3299f56baf89)
libpayload: malloc: Fix xmalloc() for zero byte allocations
The C standard considers it legal to return a NULL pointer for zero
length memory allocations, and our malloc implementation does in fact
make use of that. xmalloc() and xzmalloc() should therefore not consider
this case a failure.
Also fixed a minor formatting issue.
Old-Change-Id: Ib9b75df9458ce2ba75fd0bc0af9814a3323298eb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178725
Reviewed-by: Mike Frysinger <vapier@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 3033437e9d89c6072464860ea50ea27dcb76fe54)
Squashed 2 libpayload malloc related commits.
Change-Id: I682ef5f4aad58c93ae2be40e2edc1fd29e5d0438
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6890
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
If a programming error is detected, die can be used to print a message and
stop execution similar to failing an assert. There's also a "die_if" function
which is conditional.
die functions, like asserts, should be used to trap programming errors and not
when the hardware does something wrong. If all code was written perfectly, no
die function would ever be called. In other words, it would be appropriate to
use die if a function was called with a value that was out of bounds or if
malloc failed. It wouldn't be appropriate if an external device doesn't
respond.
In the future, the die family of functions might print a stack trace or show
other debugging info.
Old-Change-Id: I653fc8cb0b4e459522f1b86f7fac280836d57916
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/178000
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 59df109d56a0f5346562de9b3124666a4443adf0)
libpayload: Fix the license in some files which were accidentally made GPL.
Some files were accidentally made GPL when they were added to libpayload. This
change changes them over to a BSD license to be in line with the intended
license of libpayload.
Old-Change-Id: Ia95ac4951b173dcb93cb489705680e7313df3c92
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/182202
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 5f47600e50e82de226f2fa6ea81d4a3d1c56277b)
Squashed the initial patch for "die" functions and a later update to
the license header.
Change-Id: I3a62cd820e676f4458e61808733d81edd3d76e87
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6889
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
"Hey guys, I have this awesome idea! How about we put a huge array
filled with 0xa5 into the data segment of our uncompressed romstage
for no particular reason? Give our SPI driver something to do so it
doesn't get too bored, you know?"
Guess it pays off to just hexdump our image and sanity-check it top to
bottom every once in a while...
Also reduces the size because 8K is crazy just to print a bunch of
registers (256 bytes ought to be enough for anybody).
Old-Change-Id: Icec0a711a1b5140d2ebcd98338ec638a4b6262fa
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176762
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 61c360a1c3f445535c9ff383a389e643cfe4527c)
arm: Remove exception_test()
The exception_test() mechanism might have been useful when exceptions
were first implemented, but now that they are pretty stable it's really
not necessary anymore (especially not on every single boot in production
Chromebooks). It forces a simple unaligned access, and as we start
having exceptions in stages that might not have paging turned on yet,
it's better to remove that completely.
Also removed the duplicated implementations of SCTLR-stuff and switched
to the existing ones in cache.h.
Old-Change-Id: I85e66269f5e2f2dfd3e8aaaa18441493514b62f8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177101
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d0706b848572fbea26e0e432ec5827503b9603c9)
Squashed 2 exception related commits.
Change-Id: Id2c115ee39a0732c375472afc0194436e2f5e069
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the option to coreboot to set the SeaBIOS buffers below 0xC0000.
This is a requirement on the Intel Rangeley processor
because it is designed so that only the processor can write
the higher memory areas. This prevents USB and SATA from bus-mastering
into the buffers when they're set in the typical 0xE0000 area.
This will be set to Y unless defaulted to N by the mainboard or
chipset.
Push the SeaBIOS buffers down to 0x90000 segment for Mohon Peak
Change-Id: I15638605d1c66a2277d4b852796db89978551a34
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6364
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This patch removes the -ffixed-r8 CFLAG from the coreboot and libpayload
Makefiles. This seems to be a relic from U-Boot, which uses that
register to keep it's global data structure pointer. There's no reason
for us to throw away a perfectly fine register on this already pretty
constrained architecture.
Also removed a config.h inclusion from the Makefile because that should
really be done inside the C files.
Change-Id: Ia176c0f323c1be07cddf88fa5488788786a27cdf
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177110
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 2a81112abde284ba09020db6afa363169911a7f6)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6880
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Forgot an asterisk and everything goes to hell. Sorry about that.
Change-Id: I6b2503ca3ea0f80d4e4e5d8b8c0e986fec5db2c9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173587
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: David James <davidjames@chromium.org>
(cherry picked from commit 2a357560a697b56cc6022a4dd3dda47b33568d83)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6854
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The dump_td() debug function in the EHCI stack incorrectly masks the
amount of transferred bytes on output... the actual field is 15 bits
wide (30:16). Let's just use the mask constant we already have for all
the other code.
Change-Id: I28c6f0ec75cc613e38d53b670645d19bf9ffe1b9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174986
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 570077da7f16bbe2204b4a80790e4bd8fe1a2bd7)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6853
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.
Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
ARM: Split out ARMv7 code and make it possible to have other arch versions.
We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.
The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.
Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)
Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.
Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
This target does (pretty much) exactly the same what jenkins
is doing on our build nodes:
- complete abuild run of our tree with a given payload
- building all libpayload configs we ship
- building the cbmem utility
In fact at some point we could tell jenkins to just run this command.
For debugging, pass along V and Q variables so inner make processes
are slightly more noisy on demand.
Change-Id: Ib515170603a151cc3c3b10c743f1468a9875dbdc
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6797
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This patch represents a major overhaul of the USB enumeration code in
order to make it cleaner and much more robust to weird or malicious
devices. The main improvement is that it correctly parses the USB
descriptors even if there are unknown descriptors interspersed within,
which is perfectly legal and in particular present on all SuperSpeed
devices (due to the SuperSpeed Endpoint Companion Descriptor).
In addition, it gets rid of the really whacky and special cased
get_descriptor() function, which would read every descriptor twice
whether it made sense or not. The new code makes the callers allocate
descriptor memory and only read stuff twice when it's really necessary
(i.e. the device and configuration descriptors).
Finally, it also moves some more responsibilities into the
controller-specific set_address() function in order to make sure things
are initialized at the same stage for all controllers. In the new model
it initializes the device entry (which zeroes the endpoint array), sets
up endpoint 0 (including MPS), sets the device address and finally
returns the whole usbdev_t structure with that address correctly set.
Note that this should make SuperSpeed devices work, but SuperSpeed hubs
are a wholly different story and would require a custom hub driver
(since the hub descriptor and port status formats are different for USB
3.0 ports, and the whole issue about the same hub showing up as two
different devices on two different ports might present additional
challenges). The stack currently just issues a warning and refuses to
initialize this part of the hub, which means that 3.0 devices connected
through a 3.0 hub may not work correctly.
Change-Id: Ie0b82dca23b7a750658ccc1a85f9daae5fbc20e1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170666
Reviewed-by: Kees Cook <keescook@chromium.org>
(cherry picked from commit ecec80e062f7efe32a9a17479dcf8cb678a4a98b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6780
Tested-by: build bot (Jenkins)
This patch removes the confusing concept of a special "xhci_speed" with
a different numeric value from the usual speed used throughout the USB
core (except for the places directly interacting with the xHC, which are
explicitly marked). It also moves the MPS0 decoding function into the
core and moves some definitions around in preparation of later changes
that will make the stack SuperSpeed-ready. It makes both set_address
implementations share a constant for the specification-defined
SetAddress() recovery delay and removes pointless additional delays from
the non-XHCI version.
Change-Id: I422379d05d4a502b12dae183504e5231add5466a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170664
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit f160d4439c0d7cea1d2e6b97207935d61dcbb2f2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6776
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch fixes a bug in the XHCI stack that occurs when a multi-TRB TD
times out before the last TRB is processed. The driver will correctly
issue a Stop Endpoint command in that case, but the xHC will still
preserve the transfer state and just pick up right after that on the
next doorbell ring. It will then process the leftover TRBs from the old
TD the next time a transfer is issued. (cf. XHCI 4.6.9)
We fix this by changing the existing xhci_reset_endpoint() calls in
transfer functions to not only trigger on Halted (2) and Error (4), but
also on Stopped (3). That function will not actually issue a Reset
Endpoint command in this case, but it will nuke the whole transfer ring
and issue a Set TR Dequeue Pointer command, which is sufficient (though
slightly overkill) to solve our problem.
Change-Id: I3abbe30ff9d4911a8af1f792324e018d427019e8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170833
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
(cherry picked from commit f12424af0e29ac12963e8e5a7970fadcc0bb6cee)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6787
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This minor refactoring patch changes the signature of all limited cache
invalidation functions in coreboot and libpayload from unsigned long to
void * for the address argument, since that's really what you have in
95% of the cases and I think it's ugly to have casting boilerplate all
over the place.
Change-Id: Ic9d3b2ea70b6aa8aea6647adae43ee2183b4e065
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167338
(cherry picked from commit d550bec944736dfa29fcf109e30f17a94af03576)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6623
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
While the 8250 compatible serial port driver is primarily useful on x86
systems because it works with the legacy x86 com ports, some devices which
aren't x86 based have 8250 compatible UARTs as well. This change renames the
CONFIG_X86_SERIAL_CONSOLE option to the more general and direct
CONFIG_8250_SERIAL_CONSOLE and fixes up the dependencies so that non-x86
systems can enable the driver, although it will default to on on x86 and off
otherwise.
Also, the default IO port address that's added to the sysinfo structure on x86
and which is intended to be overwritten by a value in the coreboot tables is
not used on ARM. That variable is adjusted so that it's more clear it's a
default value, and made dependent on x86 since that's the only place its value
is actually used.
Change-Id: Ifeaade0e7bd76d382426e947275a9c933da4930e
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170834
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 9a10e39a2da3cb0bfb316c0869cf5025078e287f)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6655
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The existing USB_MEMORY mechanism to instantiate non-PCI host
controllers is clunky and inflexible... most importantly, it doesn't
allow multiple host controllers of the same kind. This patch replaces it
with a function that allows payloads to directly instantiate as many
host controllers of whatever type they need.
Change-Id: Ic21d2016a4ef92c67fa420bdc0f0d8a6508b69e5
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169454
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit b6e95c39dd91f654f0a345f17b3196f56adf4891)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6644
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
make junit.xml tries to build it, but fails
(ARM port doesn't seem to be ready?)
Useful test case to demonstrate a failing
libpayload build.
Change-Id: Iba4fe551b48f631e6a3bd90eb07930fc70761332
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4552
Tested-by: build bot (Jenkins)
Reviewed-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch fixes the following minor bugs in the USB stack:
1. Ensure that all dynamically allocated device structures are cleaned
on detachment, and that the device address is correctly released again.
2. Make sure MSC and HID drivers notice missing endpoints and actually
detach the device in that case (to prevent it from being used).
3. Make sure XHCI-specific set_address() cleans up all data structures
on failure.
4. Fix broken Slot ID range check that prevented XHCI devices from being
correctly cleaned up.
Change-Id: I7b2b9c8cd6c5e93cb19abcf01425bcd85d2e1f22
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170665
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 9671472263ddd0c30400ae3b6da780a18cd21ded)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6701
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The USB MSC device structure contains a "ready" state that can be either
"ready", "not ready" or "detached". The last one can only be assigned
when the device is completely unresponsive and gets forcefully logically
detached via usb_detach_device(). This call (at least in the current
version) also calls all destructors and frees the complete usbdev_t
structure (including the MSC specific part), which unfortunately makes
storing the "detached" state in that very structure a little pointless.
This patch reduces the "ready" value to a simple boolean and makes sure
that all detachment cases immediately return from the MSC driver,
carefully avoiding any use-after-free opportunities.
Change-Id: Iff1c0849f9ce7c95d399bb9a1a0a94469951194d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170667
(cherry picked from commit fd4529f37fdd1c93a8b902488ffeef7001b1a05a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6654
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
The cache functions for armv7 require 'march=armv7-a' to use
the 'isb' and 'dsb' instructions.
Change-Id: I3b7ad8fc7da8c3167b38fd1a325090fe49e4ca42
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6668
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Patch 'coreboot_tables: reduce redundant data structures' (1f5487a)
added a new lb_range structure to coreboot and libpayload but the
original chromium patch added cb_range to libpayload instead. A followup
patch 'arm: libpayload: Add cache coherent DMA memory definition
and management' (b8fad3d) used the incorrect cb_range structure but
this wasn't caught since the current verification build doesn't
build libpayload for arm.
Change-Id: I7cedc66a4794bf4daa214f54be6e917f96418ff6
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6665
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Since the DMA memory is allocated by Coreboot (outside of the payload's
linker script), it won't get zeroed upon loading like the heap.
Therefore, a warm reboot that doesn't reset memory may leave stale
malloc cookies lying around and misinterpret them as memory that is
still in use on the next boot. After several boots this may fill up the
whole DMA memory and lead to OOM conditions.
Therefore, this patch explicitly wipes the first cookie in
init_dma_memory() to prevent that from happening. It also expands the
existing memory allocator debugging code to cover the DMA parts, which
was very helpful in identifying this particular problem.
Change-Id: I6e2083c286ff8ec865b22dd922c39c456944b451
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169455
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit 8e5e1784638563b865553125cd5dab1d36a5d2cb)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6645
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch updates the libpayload XHCI stack to run on ARM CPUs (tested
with the DWC3 controller on an Exynos5420). Firstly, it adds support for
64-byte Slot/Endpoint Context sizes. Since the existing context handling
code represented the whole device context as a C struct (whose size has
to be known at compile time), it was necessary to refactor the input and
device context structures to consist of pointers to the actual contexts
instead.
Secondly, it moves all data structures that the xHC accesses through DMA
to cache-coherent memory. With a similar rationale as in the ARM patches
for EHCI, using explicit cache maintenance functions to correctly handle
the actual transfer buffers in all cases is presumably impossible.
Instead this patch also chooses to create a DMA bounce buffer in the
XHCI stack where transfer buffers which are not already cache-coherent
will be copied to/from.
Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169453
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6643
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch makes the EHCI driver work on ARM platforms which usually do
not support automatic cache snooping. It uses the new DMA memory
mechanism (which needs to be correctly set up in the Coreboot mainboard
code) to allocate all EHCI-internal communication structures in
cache-coherent memory, and cleans/invalidates the externally supplied
transfer buffers in Bulk and Control functions with explicit calls as
necessary.
Old-Change-Id: Ie8a62545d905b7a4fdd2a56b9405774be69779e5
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167339
(cherry picked from commit 322338934add36a5372ffe7d2a45e61a4fdd4a54)
libpayload: ehci: Cache management is hard, let's go copying...
It turns out that my previous commit to make the EHCI stack cache aware
on ARM devices wasn't quite correct, and the problem is actually much
trickier than I thought. After having some fun with more weird transfer
problems that appear/disappear based on stack alignment, this is my
current worst-case threat model that any cache managing implementation
would need to handle correctly:
Some upper layer calls ehci_bulk() with a transfer buffer on its stack.
Due to stack alignment, it happens to start just at the top of a cache
line, so up to 64 - 4 bytes of ehci_bulk's stack will share that line.
ehci_bulk() calls dcache_clean() and initializes the USB transfer.
Between that point and the call to dcache_invalidate() at the end of
ehci_bulk(), any access to the stack variables in that cache line (even
a speculative prefetch) will refetch the line into the cache. Afterwards
any other access to a random memory location that just happens to get
aliased to the same cache line may evict it again, causing the processor
to write out stale data to the transfer buffer and possibly overwrite
data that has already been received over USB.
In short, any dcache_clean/dcache_invalidate-based implementation that
preserves correctness while allowing any arbitrary (non cache-aligned)
memory location as a transfer buffer is presumed to be impossible.
Instead, this patch causes all transfer data to be copied to/from a
cache-coherent bounce buffer. It will still transfer directly if the
supplied buffer is already cache-coherent, which can be used by callers
to optimize their transfers (and is true by default on x86).
Old-Change-Id: I112908410bdbc8ca028d44f2f5d388c529f8057f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169231
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 702dc50f1d56fe206442079fa443437f4336daed)
Squashed the initial commit and a follow up fix.
Change-Id: Idf7e5aa855b4f0221f82fa380a76049f273e4c88
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6633
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Vadim Bendebury