Move interrupt routing to mainboard specific code.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4458 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- code restructuring (move ich7 out of i945)
- ACPI fixes
- major SMI handler updates
- make sure SMBus lives where we expect it
- try to get usb debug working
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4456 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
soon as there's an ACPI 2.0 or later table)
* add XSDT support
* add more table types
This patch will break at least the kontron (and possibly some new boards I
missed)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4453 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
more flexible. Also some minore device allocator cleanups that sneaked
in.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4452 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
include ldoptions from ldscript.ld instead appending it.
Not everyone was happy about the -Wmissing-prototypes in CFLAGS.
I put it in there now anyways, so everyone can get an overview which parts of
their code could use some cleanup. If it gets too ugly, we can still remove
that flag again.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4451 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
rather than doing inexact and slow idle loops.
Also improve error reporting in case of problems.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4449 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- use make -C instead of workaround
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4448 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Add generic Local APIC based timer code. This timer does not need expensive
calibration and thus reduces the boot time by up to more than a second.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4446 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- drop duplicate udelay function
- simplify code flow
- some cosmetics on comments
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4445 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
those symbols were left alone before, after this, they're
somewhat more in line with the rest of the tree.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4442 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The patch adds proper preprocessor guards and drops the malloc() prototype
because that's in stdlib.h
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4441 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
(according to the spec) to change the string in-situ,
even if glibc doesn't do it.
This avoids errors on Mac OS and Solaris.
Kill nrv2b support in CBFS (we have lzma),
slightly improve debug output in CBFS,
properly declare all functions of CBFS in the header.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4436 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Revision Guide for AMD NPT Family 0Fh Processors
Rev. 3.42 March 2009, found at
http://support.amd.com/us/Processor_TechDocs/33610_PUB_Rev3%2042v3.pdf
This patch takes its data from Table 9.
Build tested.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4434 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Revision Guide for AMD NPT Family 0Fh Processors
Rev. 3.42 March 2009, found at
http://support.amd.com/us/Processor_TechDocs/33610_PUB_Rev3%2042v3.pdf
This patch takes its data from Table 7.
Build tested.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4433 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Revision Guide for AMD NPT Family 0Fh Processors
Rev. 3.42 March 2009, found at
http://support.amd.com/us/Processor_TechDocs/33610_PUB_Rev3%2042v3.pdf
This patch takes its data from Table 8.
Build tested, and boot tested on a AMD Athlon(tm) Dual Core Processor 5050e.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4432 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
modules.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4430 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add the respective Super I/O config in Config.lb (Winbond W83697HG),
enable COM1 on the board, fix irq_table.c, as well as the PCI
devices listed in Config.lb (based on lspci output).
This has been tested by Jakob Bornecrantz <wallbraker@gmail.com>
on hardware, i.e. there is serial output. It does not yet boot
to a Linux console successfully, more fixing will be needed.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4426 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Kudos to ITE for providing the necessary information that quickly.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Tested-by: Glenn Mueller <mechwarrior5@hotmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4424 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware, works fine.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4423 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
single core.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4415 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Thanks to Tom for reviewing as well!
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4414 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Change the parallel port from polling to interrupt-driven.
This was tested by Andreas Mundt with a parallel port printer.
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Andreas B. Mundt <andi.mundt@web.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4405 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Currently it prints a list of components in CBFS and their size/type.
There's a bunch of additional output that could be printed, but that's
for another patch.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4404 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
i810 chipset. Not all hardware has been tested, but my test PC boots Linux
(via FILO) without any problems.
Also: Add support for the SMSC LPC47U33X to the generic 'smscsuperio' driver.
Signed-off-by: Michael Gold <mgold@ncf.ca>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware with the patch from r4398 and works fine as soon
as Linux boots (no VGA in FILO for some reason, will investigate).
In order to make the 'i810.vga' VGA blob from the vendor BIOS work
you have to make the check for PCI device ID mismatches non-fatal
(for now) in the src/devices/pci_rom.c file like this:
Index: src/devices/pci_rom.c
===================================================================
--- src/devices/pci_rom.c (Revision 4393)
+++ src/devices/pci_rom.c (Arbeitskopie)
@@ -87,7 +87,7 @@
if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) {
printk_err("Device or Vendor ID mismatch Vendor %04x, Device %04x\n",
rom_data->vendor, rom_data->device);
- return NULL;
+ // return NULL;
}
printk_spew("PCI ROM Image, Class Code %04x%02x, Code Type %02x\n",
The reason is that the VGA blob thinks the proper VGA device ID is 0x7123
whereas it really is 0x7121 on hardware. There are multiple ways to work
around this (there have been many discussions in the past), we'll see which
method will be used in future...
Note: This has been tested against r4393 only for now to make sure there
are no problems because of the recent resource allocator changes, see
http://www.coreboot.org/pipermail/coreboot/2009-July/050486.html.
Tests with trunk will follow.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
At the same time also make the 82810 code handle 82810E.
- Set SMRAM register according to CONFIG_VIDEO_MB value:
- 512 means 512 KB
- 1 means 1 MB
- Every other value for CONFIG_VIDEO_MB (e.g. 0) disables VGA.
This is not very clean, changing CONFIG_VIDEO_MB to CONFIG_VIDEO_KB
in a future patch may be nicer.
- Set MISSC2 register bits as required per datasheet to make VGA work.
The code handles both 82810 and 82810E.
- northbridge.c: Add __pci_driver entry for the Intel 82810E.
Also:
- Rename PAM register #define to PAMR as per datasheet.
- Drop unused/commented code for now.
- Don't explicitly set GMCHCFG for now, the default works ok. We'll
have to figure out the proper/ideal settings later.
The code is based on a patch from Elia Yehuda <z4ziggy@gmail.com> but
has been modified quite a bit for correctness and minimalism.
Tested on hardware with a slightly modified MS-6178 target,
patches to enable onboard-VGA for MS-6178 will follow.
Signed-off-by: Elia Yehuda <z4ziggy@gmail.com>
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4398 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Turn on Parallel Port and Floppy in Config.lb
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Andreas B. Mundt <andi.mundt@web.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4396 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The major change is that the K8 registers don't get touched until the end of
resource allocation.
Fam10 code could be updated the same way.
Move VGA code before resource allocation but after device enumeration.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4395 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Stefan Reinauer