Separate NO_XIP_EARLY_STAGES from loading FSP-M into cache-as-RAM.
Quark executes romstage directly from the SPI flash part (in-place),
but loads FSP-M into ESRAM. This split occurs because ESRAM is too
small to hold everything while debugging.
Platforms executing FSP-M directly from the SPI flash need to select
FSP_M_XIP.
TEST=Build and run on Galileo Gen2.
Change-Id: Ib5313ae96dcec101510e82438b1889d315569696
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15848
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Enable the display of cbmem during romstage and postcar. Add a Kconfig
value to prevent coreboot images from increasing in size when this
feature is not in use.
TEST=Build and run on Galileo Gen2
Change-Id: Ib70ad517ebf7d37a7f46ba503b4432c7c04d7ded
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15842
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Build the UART drivers for the postcar stage.
TEST=Build and run on Galileo Gen2
Change-Id: I8bf51135ab7e62fa4bc3e8d45583f2feac56942f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15843
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This allows the board to save the recovery request in case of unexpected
reboots caused by FSP.
With recovery module in vboot handling the saving of recovery reason
across reboots, there is no need to have special fsp reset handling
under soc.
BUG=chrome-os-partner:55431
Change-Id: I0b7ce14868a322072d3e60c1dae43f211b43fdbf
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15804
Tested-by: build bot (Jenkins)
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This allows the board to save the recovery request in case of unexpected
reboots caused by FSP.
BUG=chrome-os-partner:55431
Change-Id: If71802d2cba52a426f4c2db90d6c5384ed03ce68
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15803
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
As shown in testing, if CA use 34.3ohms drive strength, it leads
to an overshoot. To fix this, change the drive strength to 48 ohms.
BRANCH=none
BUG=chrome-os-partner:54871
TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass
Change-Id: I8666474fc18391da14a3338611f962f2f08f36d0
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: fbc1c13f9ab808fc907b2e3f9bde1d09f92980f1
Original-Change-Id: I231f5b1bd45ff262686fbacbaf119a8a57fad27b
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/358761
Original-Commit-Ready: Dan Shi <dshi@chromium.org>
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15811
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
_Static_assert() gets evaluated even when the code path it's in is
unreachable (e.g. inside an if (0) block). Unfortunately, Kconfigs that
depend on a disabled Kconfig are always 0, meaning that
CONFIG_CONSOLE_SERIAL_UART_ADDRESS on Gru cannot evaluate to UART2 when
CONFIG_CONSOLE_SERIAL (which it depends on) is disabled. Switch the
condition it is wrapped in to a preprocessor #if so that the
_Static_assert() is not evaluated when building without serial support.
BRANCH=None
BUG=None
TEST=Built and booted Kevin without serial
Change-Id: I391325fcc4b7d64b4866a7fce4444e2f28365b7d
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: f5e5cf0644154eca5b347ea381df3f6b28287524
Original-Change-Id: I33d51d4ef09b218c14173d39a12795f0cef6bb40
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/361581
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15810
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
On some x86 platforms (skylake, apollolake), we observe reboots at
different steps during the FSP initialization. These additional reboots
result in loss of recovery request because vboot_reference library
clears recovery request on vbnv once verification is complete and it has
made a decision about which boot path to take(normal/dev, slot-a/slot-b,
recovery).
Provide a way to allow mainboards/chipsets to inform recovery module in
vboot2 to save recovery reason to survive unexpected reboots. The
recovery reason is set in vbnv after vboot_reference library completes
its verification and clears the reason in vbnv while jumping to
payload.
BUG=chrome-os-partner:55431
Change-Id: Ie96be9aeb42c8209d8215943409e6327d6a8bf98
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15802
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Fix the board ID handling.
Recovery switch and WP status GPIO has been reassigned in board rev3.
Configure related GPIOs based on Board ID.
BUG=chrome-os-partner:55320
TEST=Verified GPIO assignment for Rev.1 board.
BRANCH=None
Change-Id: Id8e1ba1c039f8b5b503f0da038e5cfc84b72678f
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: d295ab514e31d9ebd1b77e0af9b769e64cbf567e
Original-Change-Id: I6d3d5df2e9017f7845edc3cd0b2c19ad7c58a97c
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/361393
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/15809
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Use the newly added check recovery request function from recovery module
in vboot2 to check for a pending recovery request.
BUG=chrome-os-partner:55431
Change-Id: I354cc094f1e5d0044cf13e5bc28246f058d470c6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15801
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Add recovery module in vboot2 that checks if a recovery request is
pending and returns appropriate reason code:
1. Checks if recovery mode is initiated by EC.
2. Checks if recovery request is present in VBNV.
3. Checks if recovery request is present in handoff for post-cbmem
stages.
4. Checks if vboot verification is complete and looks up selected region
to identify if recovery is requested by vboot library.
BUG=chrome-os-partner:55431
Change-Id: I31e332a4d014a185df2434c3730954e08dc27281
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15800
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
1. Remove unused functions/structures.
2. Add checks for NULL return values.
3. Change prefixes to vb2 instead of vboot for functions used internally
within vboot2/
4. Get rid of vboot_handoff.h file and move the structure definition to
vboot_common.h
5. Rename all functions using handoff structure to have prefix
vboot_handoff_*. All the handoff functions can be run _only_ after cbmem
is online.
6. Organize vboot_common.h content according to different
functionalities.
BUG=chrome-os-partner:55431
Change-Id: I4c07d50327d88cddbdfbb0b6f82c264e2b8620eb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15799
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
All the mainboards share the same config options for CHROMEOS. Instead
of duplicating those in every mainboard, move the CHROMEOS config to SoC
and make it dependent on MAINBOARD_HAS_CHROMEOS.
BUG=chrome-os-partner:55431
Change-Id: Iafabb6373dfe16aaf0fe2cbc4e978952adeb403e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15822
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
All the mainboards share the same config options for CHROMEOS. Instead
of duplicating those in every mainboard, move the CHROMEOS config to SoC
and make it dependent on MAINBOARD_HAS_CHROMEOS.
BUG=chrome-os-partner:55431
Change-Id: I2d54ff6beac9fca7596a8f104e3c1447cada5c05
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15821
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Currently, on Intel Skylake the uCode binary is added to
CBFS based on the config option CBFS_EXTERNAL_HEADER. But
the entry is missing into the Firmware Interface Table, so
add it there.
BRANCH=none
BUG=chrome-os-partner:55403, chrome-os-partner:53077
TEST=built and verified FIT table has ucode entry.
Change-Id: I7dd7459ff7d2468f0aff66eb3ee9c2e3d7eda501
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15783
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This device has a built-in keyboard that should be enabled by default
or it will not work in firmware. This was tested to ensure that TAB
(display info) and Ctrl+D (enter developer mode) are functional at the
Chrome OS recovery screen.
BUG=chrome-os-partner:55549
Change-Id: I60156f1fc001b88deac69e03e02e9d8277fbc38d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15782
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The controller for device mode USB is not plan of record
on apollolake. However, one still needs to configure the
one port to be host mode by default such that the devices
work as expected when plugged into the board.
BUG=chrome-os-partner:54581,chrome-os-partner:54656
TEST=Enabled xdci controller. Used USB type C->A dongle to
check that a mass storage device worked on port 0 on
reef.
Change-Id: Ia9ec5076491f31bc5dc3d534e235fb49f7b2efac
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15781
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Now that FMAP is a first class citizen in coreboot
there's no reason to have alternate locations for ELOG.
If one wants eventlog support they need to specify the
ELOG entry in the FMAP. The one side effect is that
the code was previously limiting the size to 4KiB
because the default ELOG_AREA_SIZE was 4KiB. However,
that's no longer the case as the FMAP region size is
honored.
Change-Id: I4ce5f15032387155d2f56f0de61f2d85271ba606
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15814
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
At this state, variable MTRRs are disabled. We overwrite this MTRR entry
before they are re-enabled.
Change-Id: Ieedf90f65514d848905626e75be496e08f710d91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15794
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The fixed MTRRs cover the range [0:1MiB). While calculating the
variable MTRR usage the 1MiB boundary is checked such that
an excessive number of MTRRs aren't used because of unnatural
alignment at the low end of the physical address space. Howevever,
those checks weren't inclusive of the 1MiB boundary. As such a
variable MTRR could be used for a range which is actually covered
by the fixed MTRRs when the end address is equal to 1MiB. Likewise,
if the starting address of the range lands on the 1MiB boundary
then more variable MTRRs are calculated in order to meet natural
alignment requirements.
Before:
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x0000000000100000 size 0x00060000 type 0
0x0000000000100000 - 0x000000007b800000 size 0x7b700000 type 6
0x000000007b800000 - 0x00000000b0000000 size 0x34800000 type 0
0x00000000b0000000 - 0x00000000c0000000 size 0x10000000 type 1
0x00000000c0000000 - 0x0000000100000000 size 0x40000000 type 0
0x0000000100000000 - 0x0000000180000000 size 0x80000000 type 6
CPU physical address size: 39 bits
MTRR: default type WB/UC MTRR counts: 7/17.
MTRR: WB selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x0000007ffff00000 type 0
MTRR: 1 base 0x000000007b800000 mask 0x0000007fff800000 type 0
MTRR: 2 base 0x000000007c000000 mask 0x0000007ffc000000 type 0
MTRR: 3 base 0x0000000080000000 mask 0x0000007fe0000000 type 0
MTRR: 4 base 0x00000000a0000000 mask 0x0000007ff0000000 type 0
MTRR: 5 base 0x00000000b0000000 mask 0x0000007ff0000000 type 1
MTRR: 6 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0
After:
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x0000000000100000 size 0x00060000 type 0
0x0000000000100000 - 0x000000007b800000 size 0x7b700000 type 6
0x000000007b800000 - 0x00000000b0000000 size 0x34800000 type 0
0x00000000b0000000 - 0x00000000c0000000 size 0x10000000 type 1
0x00000000c0000000 - 0x0000000100000000 size 0x40000000 type 0
0x0000000100000000 - 0x0000000180000000 size 0x80000000 type 6
CPU physical address size: 39 bits
MTRR: default type WB/UC MTRR counts: 6/8.
MTRR: WB selected as default type.
MTRR: 0 base 0x000000007b800000 mask 0x0000007fff800000 type 0
MTRR: 1 base 0x000000007c000000 mask 0x0000007ffc000000 type 0
MTRR: 2 base 0x0000000080000000 mask 0x0000007fe0000000 type 0
MTRR: 3 base 0x00000000a0000000 mask 0x0000007ff0000000 type 0
MTRR: 4 base 0x00000000b0000000 mask 0x0000007ff0000000 type 1
MTRR: 5 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0
BUG=chrome-os-partner:55504
Change-Id: I7feab38dfe135f5e596c9e67520378a406aa6866
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15780
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Update the write protect GPIO reported in ACPI to GPIO_75.
Also update the controller ID to "INT3452:01" which will
point at the goldmont device and includes write protect GPIO.
BUG=none
BRANCH=none
TEST=verify crossystem output for wpsw_cur.
Change-Id: Id6b172e289976072836746c1814e0300544a06cb
Signed-off-by: sselvar2 <susendra.selvaraj@intel.com>
Reviewed-on: https://coreboot.intel.com/7771
Reviewed-by: Sparry, Icarus W <icarus.w.sparry@intel.com>
Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com>
Tested-by: Petrov, Andrey <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15496
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The gpio bank irq is not correct and hence gpio
bank handler is never called in case of gpio based irq.
Correct the gpio bank irq to enable gpio based irq.
BUG=chrome-os-partner:55433
TEST=cat /proc/interrupts | grep INT3452 should
output 14.
Change-Id: I54253786425b7d4c2007043d49a91dfa6db0397b
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15756
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
YangtzeSataResetService implements the SataSetMaxGen2 double.
The value should be only set, if the condition is met.
For testing, add
FchParams_env->Sata.SataMode.SataSetMaxGen2 = FALSE;
to your BiosCallOuts.c, which enables GEN3 for the SATA ports.
Patch is tested with bap/e20xx board, Lubuntu 16.04 Kernel 4.4.
$ dmesg | grep ahci #before patch
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
$ dmesg | grep ahci #after patch
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Change-Id: I17a493b876a4be3236736b2116b331e465b159af
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15728
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The 'dram density' is a misnomer because the memory initialization
code treats that input parameter as a per rank density. Therefore,
update the variables to further clarify how it's actually being
used.
BUG=chrome-os-partner:55446
Change-Id: Ie4c944f35b531812205ac0bb1c70f39ac401495e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15773
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The 16Gb devices use two ranks per channel within the DRAM module.
However, the density settings are really on a per rank basis so
indicate dual rank with a device density of 8Gb.
BUG=chrome-os-partner:55446
Change-Id: Ib5dba6f9ed248750d68b726996c71def9b75961e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15772
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Despite the UPD comments the Chx_RankEnable fields are a bit
mask which indicates which ranks are enabled for physical
channel. Add the ability to set the rank mask correctly for
dual rank LPDDR4 modules.
BUG=chrome-os-partner:55446
Change-Id: I9dbed7bb6a4b512e57f6b4481180932a7cce91ff
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15771
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The reset requests are handled in the FSP 2.0 wrapper, but
the current code doesn't check any non-successful return
values. Provide parity with the memory init path which die()s
under those circumstances.
Change-Id: I9df61323f742b4e94294321e3ca3ab58a68ca4dd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15766
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Not all are matched, but this makes it easier to backport
MTRR changes from haswell.
Change-Id: Ida5943b1469fc0089a31ff3b18131fb82b0941c6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15760
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
These guards have been removed starting with model_206ax.
Change-Id: Id63034ec4080e37eee2c120aa1f1ef604db5b203
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15758
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since the socket layer is implemented with this CPU model, there
could potentially be multiple CPU models included. There can be
only one cache_as_ram include, so select it directly within
the socket directory.
Change-Id: Ia52bb152276eddfd1fb33ddb7f5d153ab8e8163c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15757
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The EVT board uses an active high power control signal while
the previous board used an active low signal. Update the tables
to reflect the differences.
BUG=chrome-os-partner:55470
Change-Id: I198c0e4e019fcffe2cf748d382351ac965a81077
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15763
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
I mistakenly assumed the order of the bits matched how one
would assign values as they wrote them msb .. lsb. However, the
gpio lib doesn't do that. Correct the order so that values are
read out correctly.
BUG=chrome-os-partner:54949t
Change-Id: I5304dfe2ba6f8eb073acab3377327167573ec2cc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15753
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Zero-filling memory below 1 MiB resets car_migrated variable so
any CAR GLOBALs are not addressed correctly for the remaining
time in romstage. Also there is no actual need to do this as
ramstage loader handles BSS.
This fixes regression with commit 70cd54310 that broke fam10 boards
with romstage spinlocks enabled.
Change-Id: I7418821997a980ae5b818bd57e8a1b6507a543af
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15754
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
When no CFLAGS are explicitly provided to it, the GMP configure script
will figure out the best optimization flags to use on its own. In
particular, it will setup the march, mfpu and mtune flags based on
hardware detection.
However, when CFLAGS are provided, they are used as-is and such
detection doesn't happen. When the march, mfpu and mtune flags are not
provided (which happens when GMP wasn't built already), not only will
related optimizations be disabled, but some code might not build because
of missing support. This happens with NEON instructions on ARMv7 hosts.
Thus, it is better not to set CFLAGS and leave it up to the GMP
configure script to get them right and still reuse those later.
Change-Id: I6ffcbac1298523d1b8ddf29a8bca1b00298828a7
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15452
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Read timestamps from the last boot sequence and display the information
as if using cbmem -t.
Tested on QEMU with a SeaBIOS payload.
Change-Id: I44f1f6d6e4ef5458aca555c8a7d32cc8aae46502
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15600
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Split the additional time stamps concerning depthcharge from
the cbmem utility sourcecode and move them into
commonlib/timestamp_serialized.h header.
Change-Id: Ic23c3bc12eac246336b2ba7c7c39eb2673897d5a
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15725
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
EVT has a wake signal for track pad which is routed to GP_15.
BUG=chrome-os-partner:54960
Change-Id: I9a73a3dc74e3bbed63509a3c076ec17a6559da55
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15723
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The tpm2_marshal_command() function returns a negative value on error,
so we must use a signed type for the return value.
This was found by the coverity scan:
https://scan.coverity.com/projects/coreboot?tab=overview
CID:1357675
CID:1357676
Change-Id: I56d2ce7d52b9b70e43378c13c66b55ac2948f218
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Found-by: Coverity Scan
Reviewed-on: https://review.coreboot.org/15717
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Add missing break to LEG_GPIO_REGS case to return the correct value for
legacy GPIO reads. Fixes coverity issue CID 1357460.
Found by Coverity, Fixes:
* CID 1357460 (#1 of 1): Unused value (UNUSED_VALUE)
returned_value: Assigning value from reg_legacy_gpio_read(step->reg)
to value here, but that stored value is overwritten before it can be
used.
value_overwrite: Overwriting previous write to value with value from
reg_pcie_afe_read(step->reg).
TEST=Build and run on Galileo Gen2.
Change-Id: I6c52e8801a32f510ac94276fe0c097850cbfde57
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15732
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The 'speed' variable isn't being used after refactoring.
Change-Id: Id27a920c61b2bba18d391a7bfefe570235402dec
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15749
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Lee Leahy