Update MrChromebox’ default branch from uefipayload_202107 to
uefipayload_202207.
This is based on upstream edk2, commit f26b70c (UefiPayloadPkg:
Add support for logging to CBMEM console).
Tested on:
* StarBook Mk V
* StarLite Mk III
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I16a012485e4b4957439e776914ffd016b4506a47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66083
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
SMMSTORE support in edk2 was not allowed in upstream edk2
as it was bootloader specific.
Shortly, it will be built from edk2-platforms and then,
it will be retired.
For now, the patches exist in the MrChromeBox fork (TIANOCORE_UEFIPAYLOAD), so enable
these by default when SMMSTORE_v2 is enabled.
Change-Id: I1861bf739c2e25f661b4f06a303348f0537dc8b3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65867
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Allow passing custom build parameters to any version of edk2, not
just forks.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4eed535415ba15ae73e22cada9153820538f5f6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
- Move configs for PCIe ports not present on z220_sff_workstation
from the devicetree.cb of base board to the overridetree.cb of
z220_cmt_workstation.
- Add a note for ME/AMT Flash Override jumper, for it is hard to
flash from OEM firmware either internally or externally without
closing this jumper.
- Add a side note for similar HP Compaq Elite 8300 SFF.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I35d8b97f52a83910a61c12b1f7367ee7a19a9ad7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65703
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
DPTF Policy and temperature sensor values from thermal team.
BUG=b:236294162
TEST=emerge-brask coreboot
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Iebcfb74c4bc719e6d8d8d9317435becd912eaf85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
futility now supports image truncation and signing of whole images with
a single command invocation. Use it for vboot-enabled coreboot images.
TEST=Build and run coreboot on google/volteer
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I49eb7e977b635ccb9f6c1b76e53c36e82be1d795
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This patch enables display port configuration as per the Rex
schematics.
TEST=Able to dump FSP UPD to ensure the override is successful.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9e81d037416e46e52cb72344425d6d8725dae192
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Pujjoflex support OZ711LV2LN SD card controller,
Select the Bayhub LV2 driver for OZ711LV2LN SD card.
BUG=b:215487382
TEST=Build FW and checking SD card work as expected in OS.
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I6759fde1eaf24599a1fdb364d6e78f4e4e12f311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
The gpios and the tick delay register are different between MT8188
and previous MediaTek SoCs, so we need to add this patch to support
SPI.
TEST=build pass
BUG=b:236331724
Signed-off-by: Liya Li <ot_liya.li@mediatek.corp-partner.google.com>
Change-Id: I6065b9d285dfd36c191f274f500fdb694920276e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66185
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MT8188 SPI tick delay setting is moved to `spi_cmd_reg` register which
is different from previous SoCs, so we define a macro to get the
designated register.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia30e94a8688c0e1c1d4b3d15206f28e5bd8c9bd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66184
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the common definitions to rtc_reg_common.h, so we can reuse those
definitions on MT8188.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia1d916a88b7cb875b35ee5813b7b52d9e98f5009
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66180
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The AUXADC register definitions are the same for all MediaTek SoCs, so
we move struct mtk_auxadc_regs to auxadc_common.h.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I48978a93137a7de42f8ea2873be3130cb8f534f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Remove the parameter and set I2C bus speed to fast. Will fill the
tuning value after real tuning.
BUG=b:240006200
BRANCH=firmware-brya-14505.B
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Iba7fe4551959617ecfa49719c1124bf85d624c31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Create the gaelin variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:239514438
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_GAELIN
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Change-Id: I7f1ff8690c7c57f8960e004d0490d5cede8667f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Add TDP and Power Limit settings for ADL-S 8+8 150W, 4+0 and 2+0.
The System Agent PCI IDs were not present in older 2.1 revision of
DOC #619501. Now that the mapping of these IDs to SKUs is known, fill
the missing TDPs and Power Limit settings based on DOC #626343.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I23dd8478e60bcc81a1048f2f6e6717dd281d1a69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Add missing System Agent PCI IDs for ADL-S 4+0 and 2+0 to configure
VccIn Aux Imon IccMax. They were not present in older 2.1 revision of
DOC #619501. Based on DOC #619501 rev 2.6.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Idfd57ce9b63db5d5fcc9d4efb8aa27ed7cc6222d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
The patch updates platform_is_resuming() API such that platform resume
state is determined from the saved state (CBMEM) instead of checking PMC
registers (PM1_STS & PM1_CNT) as they are getting cleared (before/early)
ramstage.
coreboot sends DISCONNECT IPC command which times out during resume (S3)
if system has servoV4 connected on port0. The issue occurs only during
the first cycle of resume (S3) test cycle after cold boot due to side
effect of platform_is_resuming() API that is not determining the resume
(S3) state correctly in ramstage.
PM1_STS and PM1_CNT register gets cleared at the start of ramstage.
platform_is_resuming() function was checks the cleared register value
and fails the condition of resume (S3) resulting in sending DISCONNECT
IPC command. Checking the platform resume state from the CBMEM saved
state using acpe_get_sleep_type() function helps cross verify the
system previous state at the later part of ramstage.
localhost ~ # cbmem -c | grep ERROR
[ERROR] EC returned error result code 3
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0x200a7 failed
[ERROR] pmc_send_ipc_cmd failed
[ERROR] Failed to setup port:0 to initial state
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0x200a7 failed
[ERROR] pmc_send_ipc_cmd failed
[ERROR] Failed to setup port:1 to initial state
[ERROR] GENERIC: 0.0 missing read_resources
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0xd0 failed
[ERROR] PMC: Failed sending PCI Enumeration Done Command
BUG=b:227289581
TEST=Verified system boots to OS and verified below tests on
Redrix (ADL-P) and Nivviks (ADL-N)
1. coreboot doesn't send the DISCONNECT during S3 resume
2. suspend S3 passes with both suzyq and servoV4 connected
3. After S3 resume, system detects the pen drive with Superspeed
4. After system resumes from S3, hot-plug the pen drive, system detects
the pen drive
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I353ab49073bc4b5288943e19a75efa04bd809227
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66126
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add weida touchscreen support for drawcia.
BRANCH=dedede
TEST=Build and verify that touchscreen works on drawcia.
Change-Id: Ic76f3529771c6eeeafef7ca50fc400065aac2211
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65471
Reviewed-by: Ivan Chen <yulunchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
set i2c address to 0x14 for Goodix touchscreen
BUG=b:239180430
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I11a2d9c684bc511b3942f88f74a2495e796bc3c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
When the dGPU is entering GCOFF, the link should first be placed into
L2/L3 as appropriate for the design, then when exiting, the link should
be placed back into L0. This patch fixes that oversight.
BUG=b:239719056
TEST=build
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia3bdfe5641216675e06ebe82ffe58bf8c049b26b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The EEs noticed this pin was misbehaving; it was accidentally set to a
low output, but should be open-drain (NC). This patch fixes that.
BUG=b:237837108
TEST=verified by EEs
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ie76a951320c49b9fbc1f23b96f04c9f86ad44d42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
For some yet unknown reason, when this GPIO is locked, there is an
interrupt storm for IRQ #9 apparently caused by GPE 0x66. GPP_F14 is set
to GPE 0x64 on the ADL platform, so this doesn't quite make sense. This
patch removes the lock and fixes this IRQ storm, but the root cause is
not identified yet.
BUG=b:236997604
TEST=`grep ' 9:' /proc/interrupts` shows a reasonable value now
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I3d1c66fac80a173798ae33e48b1776d9f4fb5eaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
After staring at lots of scope shots, the EE has determined that a few
modifications to the GCOFF sequence can be made:
- Remove delay between PERST# assertion and GPU_ALLRAILS_PG deassertion
- Remove delay after ramping down FBVDD
This patch implements these minor changes.
BUG=b:240199017
TEST=verified by EE
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7d492b3e65a231bc5f64fe9c3add60b5e72eb072
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
After some debugging, it has been determined that the ASPM L0s substate
is functional, but there is still some problem with ASPM L1 substates,
so this patch updates ASPM status for the dGPU from disabled to L0s
only.
BUG=b:240390998
TEST=tested with nvidia tools
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I584bdbf26eda20246034263446492bf4daf5f3b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
There are 3 more CPU PCIe RP UPDs that are the current code is not setting,
and some boards may want to set these, so this patch adds support to set
these UPDs. The default values for any existing boards using these UPDs
should not change with this patch.
The UPDs are:
- CpuPcieRpDetectTimeoutMs
- CpuPcieRpAspm
- CpuPcieRpSlotImplemented
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id48019f984e8e53ff3ce0c3c23e02dab65112c99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66197
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Generate SPD id for hynix H54G68CYRBX248
BUG=b:239899929
BRANCH=firmware-brya-14505.B
TEST=run part_id_gen to generate SPD id
Change-Id: I96babe340678ca9b82b06d3193b93a7676f23fef
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Generate SPD id for Hynix H54G68CYRBX248
BUG=b:239888704
BRANCH=firmware-brya-14505.B
TEST=run part_id_gen to generate SPD id
Change-Id: I9412b988bcdb0c744e016f3add6dacda8185d6db
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Matei Dibu