When reading+clearing a GPE for use as an interrupt we need to
re-read the status register and keep setting the clear bit until
it actually reads back clear. Also add a 1ms timeout in case the
status never clears.
This is needed if a device sends a longer interrupt pulse and it
is still asserted when the "ISR" goes to clear the status.
BUG=chrome-os-partner:59299
TEST=test cr50 TPM with 20us pulse to ensure it can successfully
communicate with the TPM and does not get confused due to seeing
interrupts that it should not.
Change-Id: I384f484a1728038d3a355586146deee089b22dd9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17212
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Increase the IRQ timeout to prevent issues if there is a delay
in the TPM responding to a command. Split the no-IRQ case out
so it doesn't suffer unnecessarily.
BUG=chrome-os-partner:59191
TEST=suspend/resume testing on eve board
Change-Id: I1ea7859bc7a056a450b2b0ee32153ae43ee8699f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17204
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add Stoney specific code subtree and fix Makefles and Kconfig files.
Author: Charles Marslett <charles@scarlettechnologies.com>
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit c3a469d11e4676b3b63d11a30955113291d00ec8)
Change-Id: Ic4d97a3745f7fc5a637ae6da17a9009b9757136e
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17217
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Carrizo (00660F01), Merlin Falcon (00660F01), and Stoney Ridge (00670F00)
locate the HD audio controller on the northbridge root complex at 9.2
instead of the FCH. This duplicates the existing ASL into the northbridge
directories and reports the correct address.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit f68206c2b42c90076efd968a99f4d3a49e403438)
Change-Id: I6d42bb40ad58c7f35e8c88ff27ebd327d656c021
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17216
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add Stoney specific code subtree and fix Makefles and Kconfig files.
Original-Author: Charles Marslett <charles@scarlettechnologies.com>
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit 51a187a3d08a425ef0cc141a7ddc49a70ac931b1)
Change-Id: I13c6b08c780e7bd2abd0fabbde1a89686132f65c
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17196
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Make changes to the vendorcode files that allow them to work
with the binaryPI. This fixes various compile issues and
establishes a common calling convention between coreboot and
AGESA.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit f7ea2785d70bd6813b5b4d315b064802251d9557)
Change-Id: Ie36228476a9dbd7b83f95828ca9c7252cecd8ec8
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17195
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Make exact copies of the AGESA files from the Stoney PI package
replacing existing versions. Change the license text and fix
up misc. whitespace.
This will facilitate the review of binaryPI changes in the
vendorcode directory.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 1097249585ab76fab59dcfbf8e7a419f34fcfcb6)
Change-Id: I9951df58aeab2d533efc0a837ce35f343ff28d7c
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17194
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Prepare for new 00670FF00 support.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit ca53cac5c847c55e56ad6f5feb382c04f33ae77a)
Change-Id: Ib48b1611bf70ec302c50f6e07bd2b3d9b09e0a24
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17193
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add acpigen_write_opregion that generates ACPI AML code for OperationRegion,
region name, region space, region length & region size are inputs.
Add acpigen_write_field that generates ACPI AML code for Field.
Operation region name & field list are inputs.
Change-Id: I578834217d39aa3b0d409eb8ba4b5f7a31969fa8
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17113
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Adjust the names to match AMD's convention for family and model.
This patch is relevant for:
Trinity & Richland: Family 15h Models 00h-0Fh
Carrizo: Family 15h Models 60h-6Fh
Mullins & Steppe Eagle: Family 16h Models 30h-3Fh
Change-Id: I613b84ed438fb70269d789c9901f1928b5500757
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/17169
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Martin Roth <martinroth@google.com>
CLK_B1(GPIO_80) and DATA_2(GPIO_83) pins needs to be
configured as native mode to use them for DMIC record
on other potential DMIC's.
DMIC blobs configure the clocks. For stereo & quad channel
record, both CLK_A1 and CLK_B1 are enabled.
For mono channel record, only CLK_A1 is enabled.
BUG=chrome-os-partner:56918
BRANCH=None
TEST=During DMIC record, check CLK_B1 and DATA_2 lines
Change-Id: I838009b85190de5360d593238e48c9593c1dc43a
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/17199
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
A dedicated pmc_ipc DSDT entry is required for pmc_ipc kernel driver.
The ACPI mode entry includes resources for PMC_IPC1, SRAM, ACPI IO and
Punit Mailbox.
BRANCH=None
BUG=chrome-os-partner:57364
TEST=Boot up into OS successfully and check with dmesg to see the
driver has been loaded successfully without errors.
Change-Id: Ib0a300febe1e7fc1796bfeca1a04493f932640e1
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/17181
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
SATA device remains unrecognized if connected at Port 2.
Port control and Status register (PCS) is by default set by
hardware to the disabled state as a result of an initial
power on reset. OS read PCS register during boot causes
disabling of SATA ports and can't detect any devices.
BRANCH=none
BUG=chrome-os-partner:59335
TEST=Build and boot SKL from SATA device connected at Port 2.
Change-Id: I4866ca44567f5024edaca2d48098af5b4c67a7ac
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/17229
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
When Chrome EC is disabled, vboot hash is not available during S3 resume
Hence disable vboot verification when Chrome EC is not available.
Change-Id: I665f5f0e2e53da7b735de30443d323572d8a1a9c
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17246
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Avoid use of Local0 variable in TEVT acpi method.
If mainboard doesn't expose any thermal sensor, then warning is
generated for variable Local0 not been used.
Change-Id: I0634961a01144e41a8480c8c6ed8b7fdd358e768
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17245
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add device id for PCH-Y used in Kaby Lake RVP3 board.
Change-Id: I9235265cf88e4d044e7216f53e6da7021fb68238
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17244
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Note that currently, traps are only handled by the trap handler
installed in the bootblock. The romstage and ramstage don't override it.
TEST=Booted emulation/spike-qemu and lowrisc/nexys4ddr with a linux
payload. It worked as much as before (Linux didn't boot, but it
made some successful SBI calls)
Change-Id: Icce96ab3f41ae0f34bd86e30f9ff17c30317854e
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/17057
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Ron's code calculated the DLL and DLM registers of the 8250 UART, but
that's the job of the UART driver. uart_input_clock_divider isn't needed
anymore because the default value of 16 works.
As a bonus, the baud rate can now be selected in Kconfig, instead of
being hardcoded at 115200.
TEST=Booted the board at 9600 and 115200 baud.
Change-Id: I3d5e49568b798a6a6d944db1161def7d0a2d3b48
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/17188
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Log when the MRC cache is attempted to be updated with status
of success or failure. Just one slot is supported currently
which is deemed 'normal'. This is because there are more slots
anticipated in the future.
BUG=chrome-os-partner:59395
Change-Id: I0f81458325697aff9924cc359a4173e0d35da5da
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17231
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Some events were added in other places, but coreboot's
elog namespace wasn't updated. As such there's a collision
with the thermtrip event. This change at least updates the
elog information to reflect potential event type uage.
BUG=chrome-os-partner:59395
Change-Id: Ib82e2b65ef7d34e260b7d7450174aee7537b69f6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17230
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
If selected, libgnat will be linked into ramstage. And, to support Ada
package intializations, we have to call ramstage_adainit().
Change-Id: I11417db21f16bf3007739a097d63fd592344bce3
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16944
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This brings the frequency down to 400kHz which is spec for
fast i2c.
BUG=chrome-os-partner:58889
Change-Id: Ibc5f152e55ed618f18ac6425264f086b1f2d1ffa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17215
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This brings the frequency down to 400kHz which is spec for
fast i2c.
BUG=chrome-os-partner:58889
Change-Id: I8689a062b5457aa431eaa7fb688a7170dad83fcf
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17214
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
1. Update gpio.h to set proper pad config for Kaby Lake RVP3.
2. Set spd index to zero.
3. Remove nhlt specific init.
Change-Id: I41a312d92acd2c111465a5e8f1771158e3f33e2b
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17161
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
There are two configs, sdram-lpddr3-hynix-2GB.inc and
sdram-lpddr3-samsung-2GB-24EB.inc that use .ddrconfig = 14.
Changing .ddrconfig from 14 to 3 improves performance
especially on contiguous memory accesses. Comparing the .ddrconfig:
- if .ddrconfig = 3,
C RDRR RRRR RRRR RRRR RBBB CCCC CCCC C---
- if .ddrconfig = 14,
C DRBB BRRR RRRR RRRR RRRR CCCC CCCC C---
where
- R: indicates Row bits
- B: indicates Bank bits
- C: indicates Column bits
- D: indicates Chip selects bits
.ddrconfig = 3 has multiple banks switching which improves DDR timing.
BUG=chrome-os-partner:57321
TEST=Boot from fievel and play video
BRANCH=veyron
Change-Id: Ifdcedc28e84429b8b79c7553b38b667631d29c09
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93882e4f2000d93c9dae5e6d4b2e1f4b7bc9489e
Original-Change-Id: Ic98ebae48609a7604ec678b6bd14dd2b29b669c4
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/404691
Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17210
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Fix msch ddrconfig register write error. Also make sure that the row
number configured in msch is equal to the row number configured in the
DDR controller.
This would not affect systems with 4GB of memory, but is needed
for 2GB configurations.
BUG=None
BRANCH=None
TEST=Boot from kevin
Change-Id: Ic95b3371faec5b31c32b011c50e55e83d949e74d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dfa43d3d44839d9685b6393157f51b646e9996de
Original-Change-Id: I0c95378bf937a245b7cdc0583c5d2ed1347f2a3e
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/399563
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17208
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This was a dummy implementation until now which returned -1 always. Add
support for reading SPI flash status register (srp0).
BUG=chrome-os-partner:59267
BRANCH=None
TEST=Verified by enabling and disabling write-protect on reef that the
value of SRP0 changes accordingly in status register read.
Change-Id: Ib1349605dd87c4a087e416f52a8256b1eaac4f4c
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17205
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
String format required two arguments however those
were packaged in ( , ) so the left one was ignored.
Change-Id: I59698319d5ff4215f296356147b4e22229cc9245
Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io>
Reviewed-on: https://review.coreboot.org/17118
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
After I did a new toolchain build, I found the
the mhartid register value is wrong for Spike.
The docs seem to agree with Spike, not the
code the toolchain produces?
Until such time as the bitstreams and toolchain can find
a way to agree, just hardcode it. We've been playing this game
for two years now so this is hardly a new approach.
This is intentionally ugly because we really need the
toolchains and emulators and bitstreams to sync up,
and that's not happening yet. Lowrisc
allegedly implements the v1.9 spec but it's PTEs are clearly
1.7. Once it all settles down we can just use constants
supplied by the toolchain.
I hope the syncup will have happened by the workshop in November.
This gets spike running again.
Change-Id: If259bcb6b6320ef01ed29a20ce3d2dcfd0bc7326
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/17183
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
The Stoney processor can use multiple directory structures. Turn
this feature on in the makefile.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit a3334632fd53c07a046c9b23161f6ee67e5cb16e)
Change-Id: I40a9ef2e6bed51bc339d3f9ae7c6f316192c4a78
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17149
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
Double the space for psp2dir to 0x200.
Based on advice from AMD, increase the region containing
the signature to 4K.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit e03a9402711c3a210816d0aa32865491a0523639)
Change-Id: If60132f913928bab0c2fe4aacedf342080929599
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17148
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit 482b65c219b932fd374f2ac469a023db219a66de)
Change-Id: I0a24a0aa4c7d9f4a8cc3ee9b7da60ea7704e6f17
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17147
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
Make the PSP2 smufirmware2 name unique so the command-line option
gets picked up.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: <marcj303@gmail.com>
(cherry picked from commit 98cf3880797f72aeb7169c3f8718a10092af9624)
Change-Id: I5430cf8b81fb03c95e6ee9d7e53455e6224256ff
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17146
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The Stoney device supports only a single channel of DRAM with
two DIMMs. Correct the dimmensions of the SPD lookup array.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: <marcj303@gmail.com>
(cherry picked from commit 54a5e4a7092b77cca90894e86387f719fa3aa2c8)
Change-Id: Ib776133e411d483bb5b7e3c070199befc631d209
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17145
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remove the language associated with the Carrizo Gfx PCIe bridges.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit cc32b09b0f0137c11d82f35274ca33e013f73748)
Change-Id: I8b67a646f98667d500fcee5da8389c10483488da
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17144
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Modify the new Stoney support files to match the APU's IDs and codename.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit de626730758def76e558294762a06d8ec9950cb9)
Change-Id: Idc914bc80a27ac13426fdf00fc3f578ce072086f
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17143
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Prepare for new 00670FF00 (StoneyRidge) support.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit 037cf16883fafd329a15f903ddf97e24a879bcce)
Change-Id: I130d4f13beb2c1d71e4e4e9be5011f7993b34660
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17142
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the D18F0 device ID for the Stoney APU.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit c0fd7f70527c273bcbdce5655a21ca4de4854428)
Change-Id: Ib599fc6119a3cef53f4f179c2fcd0e45905d81a4
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17141
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Add StoneyRidge specific IDs, code, whitespace, and fix Makefles and
Kconfig files.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit 0bd1dc834792453d8e66216fa9a70afe2f7537d7)
Change-Id: Id79f316a89b3baeae95e221fb872dc8a86e7b0f1
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17140
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Prepare for new 00670F00 (StoneyRidge) support.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit 87d26e05189247685df0ca6492dc3181a1bad5e8)
Change-Id: Ib296ad32a061669b28dae742cac08bb75fdd0de4
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17139
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Monitor/Mwait is broken on APL. So, it needs to be disabled.
BUG=chrome-os-partner:56922
BRANCH=None
Change-Id: I12cd4280de62e0a639b43538171660ee4c0a0265
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/17200
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Some user might change some devices. After a suspend this reset
to the (nvram) defaults which breaks the user expectation.
Change-Id: Ifacca35210474ec3db41a53d2ad18f3798b14077
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16215
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Duncan Laurie