In order to generate rmodules in the format of ELF files
there needs to be support for writing out ELF files. The
ELF writer is fairly simple. It accpets sections that can
be associated with an optional buffer (file data). For each
section flagged with SHF_ALLOC a PT_LOAD segment is generated.
There isn't smart merging of the sections into a single PT_LOAD
segment.
Change-Id: I4d1a11f2e65be2369fb3f8bff350cbb28e14c89d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5377
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: If8c53b5370be9101b9e5f2dfa88a6229f500a0f6
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5392
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
GCC suppresses warnings about unused static functions if they are
inline, however Clang only does this for header files. None of these
MASK_ declarations are used, so just remove them.
Change-Id: Ia230beba3f6367237838d9b3d90536459e1d52cb
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5273
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Optionally parse the symbol table contained within an ELF
file. It currently assumes there is only one symbol table present,
and it errors out if more than one is found.
Change-Id: I4ac4ad03184a319562576d8ab24fa620e701672a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5376
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Optionally parse the string tables within an ELF file.
Change-Id: I89f9da50b4fcf1fed7ac44f00c60b495c35555ef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5375
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Optionally parse the relocation entries found within an ELF
file.
Change-Id: I343647f104901eb8a6a997ddf44aa5d36c31b44b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5374
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
In order to make the ELF parsing more flexible introduce
a parse_elf() function which takes a struct parsed_elf
parameter. In addition take a flags parameter which instructs
the ELF parser as to what data within the ELF file should be
parsed.
Change-Id: I3e30e84bf8043c3df96a6ab56cd077eef2632173
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5373
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
I was overzealous in checking the section size with respect
to the file size. That check makes no sense as the section only
deals with link sizes -- not on-disk sizes. Remove the check as
it doesn't make any sense.
Change-Id: I348e7847ae3a50badc22693439614f813462445a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5384
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The target board has a different base addr. for its hardware
monitor (fans, temp, etc) from the Fintek Super I/O datasheet.
Change-Id: Ifc025cb92d0fc4e8f813091d00a6c87deae05863
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5383
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Fan controls in 0x400-0x4ff are not programmed here. Thus fan
control from amd/persimmon in the devicetree.cb does not apply
to this board.
Change-Id: I9156143476df0a7b44c7af90fa2107e8a8ba851e
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5381
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
While parsing the section and program headers ensure the
locations of their contents are within the elf file proper.
Change-Id: I856f7de45f82ac15977abc06e51bedb51c58dde1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5372
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Though the result doesn't matter much, the callers of calloc()
should order the parameters correctly. i.e. the first paramter
is the number of elements in an array and the second is the
size of each element.
Change-Id: Ic7c2910d623d96f380feb4e5f6fa432376f49e9b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5371
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
elfparsing.h serves as the header to working with the elf
parser. Additionally, only include what is needed by the other
files. Many had no reason to be including elf.h aside from fixing
compilation problems when including cbfs.h.
Change-Id: I9eb5f09f3122aa18beeca52d2e4dc2102d70fb9d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5370
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The only user of iself() was in elfheaders.c. Move it there,
and make it local to the compilation unit.
Change-Id: I0d919ce372f6e2fce75885fb4fcba20d985979b3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5369
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The elfheaders code was manipulating struct buffers. Use
the introduced buffer helper functions. Additionally fix
up offset and size checks for the program headers and section
headers by using common code paths.
Change-Id: I279c77f77aaa1860a0be43fb111df890dd1d84d5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5368
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This reverts commit b845636ce6.
This commit changed the board status script to describe all boards in
terms of x86 terminology, such as CPU->southbridge->northbridge.
This terminology does not apply to a number of SoCs, in which the
buses are not connected via successive bridges, and as such it is
misleading and misguided to describe ideas of southbridge and
northbridge for these devices.
Change-Id: I98ba24ee00b816bf20d507c6d313ec2946acaedf
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5177
Tested-by: build bot (Jenkins)
Adds support for the following Adesto Technologies
SPI Flash parts.
AT25DF081
AT25DF321
AT25DF641
It has been tested on an Orion VPX7654 board populated
with an AT25DF321A part. The "08" and "64" densities have not
been tested.
These parts are the successors of the Atmel AT26DF line that
was spun out or purchased by Adesto.
In this patch, adesto.c is identical to winbond.c with part
entries for the Adesto parts. The datasheet for the AT25DF parts
includes a "100MHz" programming command in addition to the "85MHz"
command that is currently used but this patch does not add support
for that enhanced programming mode.
Change-Id: If82d075fd9000030480c412c645dcae2c8bb7439
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5225
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fixing the location of the ram oops buffer can lead to certain
kernel and boot loaders being confused when there is a ram
reservation low in the address space. Alternatively provide
a mechanism to allocate the ram oops buffer in cbmem. As cbmem
is usually high in the address space it avoids low reservation
confusion.
The patch uncondtionally provides a GOOG9999 ACPI device with
a single memory resource describing the memory region used for
the ramoops region.
BUG=None
BRANCH=baytrail,haswell
TEST=Built and booted with and w/o dynamic ram oops. With
the corresponding kernel change things behave correctly.
Change-Id: Ide2bb4434768c9f9b90e125adae4324cb1d2d073
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5257
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Low system tables are in this region, and it is probably safer
to keep ASEG reserved.
Also keep the region used by ramoops from being used by the OS
and from being cleared by developer mode boots.
Lots more work needed to make the ACPI tables fully functional.
BUG=chrome-os-partner:23505
BRANCH=rambi
TEST=boot on rambi and see that the kernel finds RSDP and uses ACPI
Change-Id: I4f7064d3cff14a3ecf15b194a1f20c1fa9d5e134
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175554
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4932
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This adds the EHCI driver back to libpayload and configures
the devicetree to route ports to EHCI.
This is hopefully just temporary until the issues with XHCI
can be worked out.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=build and boot from USB on rambi
Change-Id: I0549661f5e5fd83477f4839a05e7e21175b24b64
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175513
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4931
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This adds required steps to initialize the EHCI controller
on the baytrail platform.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=build and boot from USB on rambi
Change-Id: I3a5487791e2305616036d4550e260a178c0e1c4d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175512
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4930
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This adds required steps to initialize the XHCI controller
on the baytrail platform.
Actually using XHCI is causing lots of bad behavior including
apparent memory corruption.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=build and boot on rambi
Change-Id: Ic43e04f4b47e107ec3bb0c387a9fc72c3cae0271
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175511
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4929
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Apparently the LPE device needs a 25MHz clock. Provide
the work around to enable this clock.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and booted. Confirmed setting being applied.
Change-Id: Ibff5563436b3025eb8b61ffee3302bd2da872b39
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175493
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4928
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The clock control unit needs to be accessed to configure
some of the devices properly. Therefore. provide a way
to access the CCU.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built.
Change-Id: I30ed06e6aef81ee99c6d7ab3cbe8f83818b8dee5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175492
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4927
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Parts of the audio path are common between the HDA and LPE.
However, those parts are power-controlled by the D-state of
the HDA device. Therefore, one cannot put the HDA into D3Hot
because those audio paths will be shutdown.
BUG=chrome-os-partner:22871
BRANCH=None
TEST=Built and booted through depthcharge. Disabling HDA still
causes a shutdown when performing warm reset, however I
was able to verify the magic sequence was being performed.
Change-Id: I3b01356d85a4b7b902bd896b8eb9e7bc509fcc42
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175491
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4926
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Previously it was not known how to put the TXE pci device
into D3Hot. It's been disseminated that this is not a requirement
for disabling the TXE pci device in the function disable register.
Therefore, allow this by returning 0 from place_device_in_d3hot().
BUG=chrome-os-partner:22871
BRANCH=None
TEST=Temporarily set TXE to be disabled. Noted FUNC_DIS was being
set accordingly.
Change-Id: Ibf537bf8ba718859591dc89bdf41e57c1ea9d836
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175490
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4925
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
There are some open-coded manipulation of the struct buffer
innards in the elf parsing code. Add helper functions to avoid
reaching into the struct itself.
Change-Id: I0d5300afa1a3549f87f588f976184e880d071682
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5367
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There was already a bgets() function which operates on a buffer to
copy a byte stream. Provide bputs() to store a byte stream to a
buffer, thus making the API symmetrical.
Change-Id: I6166f6b68eacb822da38c9da61a3e44f4c67136d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5366
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to provide consistent usage provide the get8()
and put8() callbacks to xdr operations. That way no futzing
needs to be done to handle 8-bit reads and writes.
Change-Id: I1233d25df67134dc5c3bbd1a84206be77f0da417
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5365
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order for multiple tools to use the common code found
in common.c place the verbose variable within common.c's
compilation unit.
Change-Id: I71660a5fd4d186ddee81b0da8b57ce2abddf178a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5364
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order for userland to create rmodules the common code should be
shareable. Therefore, convert the short u<width> name types to the
posix uint<width>_t types. Additionally, move the definition of the
header structure to a new rmodule-defs.h header file so that userland
can include that without pulling in the coreboot state.
Change-Id: I54acd3bfd8c207b9efd50a3b6d89efd5fcbfc1d9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5363
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There are 3 steps to enable the IMC fan control:
1. Enable fan control related registers on Hudson using oem_fan_control().
2. Set EcStruct.
3. Enable thermal zone using enable_imc_thermal_zone().
I have tested on Olive Hill.
Change-Id: I1748e8c92fb72a82bac0506ecdf98304a5bd8239
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/4301
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
There are 3 steps to enable the IMC fan control:
1. Enable fan control related registers on Hudson using oem_fan_control().
2. Set EcStruct.
3. Enable thermal zone using enable_imc_thermal_zone().
I have tested on Parmer.
Change-Id: Id11d5c5da30346c034d155a73749e7f4c9c980eb
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/4302
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
This preprocessor guard was used to disable CBMEM console from
romstage of ROMCC boards. It unintentionally disabled it for ARM
too as they do not have CACHE_AS_RAM selected.
Option EARLY_CBMEM_INIT implies CAR migration which is required
to have CBMEM console in romstage. This change should have been
done in commit f8bf5a10 already, but we missed it.
Change-Id: I03e95183be0e78bc7dd439d5fef5b10e54966dc3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5356
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
i915_reg.h re-declares some of MCH registers as seen through MCHBAR mirror.
It's not currently used and we don't want any MCH registers in GFX.
Change-Id: I5fa4711fee60d64316696b7ed713013de8759b54
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5318
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Information really contained in it is mostly the same as in type 1 tag.
However Linux uses type 2 to match hardware. Duplicate the info.
Change-Id: I75e13d764464053ecab4a833fbb83836cedf26e6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5322
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Recent coreboot puts real tables in high memory and only pointer
is remaining at traditional location.
This patch makes lbtdump work with recent coreboot.
Change-Id: I1c4945909da16c0ec81e59c2d94d9a7d27e2aba5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4830
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This board has a working PS/2 port for a keyboard. Thus, it
makes for a good option to have on by default.
Change-Id: Ifcde0474d7be26152f1b5e19fe4906e87732b9a4
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5357
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The platform dependent mainboard.c was incorrectly disabling the
second clock signal feeding the GPP ports. This results in
spurious hangs by calling the set_pcie_dereset() SB CIMx callback
many times. This also stops coreboot from finding the second NIC
behind the pci 15.0 bridge.
Change-Id: I9f2370f6e05d1c5532fbca8203e32ab1ff15266a
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5355
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Taken from intel/xe7501devkit, maybe it had same symptoms once.
The call to ich5_watchdog_on() has side-effect of exploding the
requirements for ROMCC internal arrays at compile-time. The hard-coded
limit in question is MAX_RHS in util/romcc.c, the default of 127 comes
from the rhs field defined with 7 bits.
Before this patch intel/jarrell builds were using upto MAX_RHS=102, while
other ROMCC boards built even with MAX_RHS=10. This workaround brings
intel/jarrell to the same level.
Change-Id: I162d801f81d9196403d88636eb9cb291c950ded0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5348
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
These boards first failed when attempting to change print_err() from
direct function call to console_tx_XX() to a code block in the form of
do { if (y) console_tx_XX(x); } while(0)
Removing the label dummy_romcc_workaround_label added here will
trigger the following compiler error for the two boards:
Internal compiler error: no edge to block->last->next
Change-Id: I997adfaf586d7fa2096401dd574b07ce676d0ac6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5349
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Clang warns about comparisons of unsigned integers with being below
zero. Remove spurious logic checks that are always false.
Change-Id: I70c4d5331df81e48bf7ef27ff98400c4218f7edc
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5275
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This probably belongs elsewhere, but I haven't found a nice place yet.
Change-Id: I9ca52db33905cf4ee229d7ff44012105915271a8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4720
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Boot speeds can be sped up by mirroring the payload into
main memory before doing the actual loading. Systems that
would benefit from this are typically Intel ones whose SPI
are memory mapped. Without the SPI being cached all accesses
to the payload in SPI while being loaded result in uncacheable
accesses. Instead take advantage of the on-board SPI controller
which has an internal cache and prefetcher by copying 64-byte
cachelines using 32-bit word copies.
Change-Id: I4aac856b1b5130fa2d68a6c45a96cfeead472a52
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5305
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This is based on the RCBA configuration setup from haswell.
It handles PCI, BARs, IO, MMIO, and baytrail-specific IOSF.
I did not extend it to handle MSR yet but that would be another
potential register type.
There are a number of approaches to this kind of thing, but in the
end they have a lot of switch statements and a mass of #defines.
I'm not particularly set on any of the details so comments welcome.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=emerge-rambi chromeos-coreboot-rambi
Change-Id: Ib873936ecf20fc996a8feeb72b9d04ddb523211f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175206
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4923
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
UARTs now have unified prototypes and can use a single entry
in the list of drivers for ramstage.
Change-Id: I315daaf9a83cfa60f1a270146c729907a1d6d45b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5308
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This menu may become a bit more complicated with addition of
new USB hardware so move it out of console/.
Change-Id: Ieb330675b9227a3e53d093f7c2b5a65e3842dc82
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5307
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Aaron Durbin