Introduce identity_map() function. It takes a memory range and
identity maps it entirely in the TLB table, if possible. As a result
the virtual and physical address ranges are the same.
The function attempts to use as large of a page size as possible for
each region in order to conserve TLB entries.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=Build and boot on Pistachio with the rest of the patches applied.
Change-Id: I4d781b04699e069a71c49a0c6ca15c7a6b42a468
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 234d32edfd201019b7a723316a79c932c62ce87e
Original-Change-Id: If3e2392b19555cb6dbae8b5559c1b1e53a313637
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246693
Reviewed-on: http://review.coreboot.org/9815
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Found that any non-USB3.0 devices connected to type-C ports
(displayPort dongles) cause XHCI port to see connection which in turn
leads us to enter USB compliance mode.
That in turn causes the port to wake the system for a yet-to-be
determined reason. Clearing the PORTSC status bits (actually just
CSC) seems to remedy the wake.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:35320
TEST=manual,
1. Plug hoho into type-C port on samus and remove
2. powerd_dbus_suspend
Device stays asleep.
Change-Id: Id3a291579ffca0152a7ef32e37ecae80ca08a82b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0be5cba4916681dceb0372e76d9643e6c7175db5
Original-Change-Id: I1396b9f8013dbbb31286c1d8958af592b3da7475
Original-Reviewed-on: https://chromium-review.googlesource.com/247410
Original-Commit-Queue: Todd Broch <tbroch@chromium.org>
Original-Tested-by: Todd Broch <tbroch@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9814
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I97920e7eb64c05034184f9a4e1c8f2dfa44d3fdd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9813
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If the board is configured with a pre-graphics delay it should
be skipped in the resume path.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=measure resume time in dev mode to be same as normal mode
Change-Id: I5a4ad5bba9e5316c89f7935d8811759b041429d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b44a7167532410fc44ca9df1c91c91aaf541ae49
Original-Change-Id: Ic9f2cda71d8a567f57e863409f0f3fb98ab68bcf
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/245116
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9812
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch fixes the use of the recovery button, and the value is stored
in a SATA controller scratch register.
BUG=chrome-os-partner:35241
BRANCH=none
TEST=Use recovery button and run firmware_RecoveryButton
Change-Id: Ia06f147c7e44d6c4eea2c2e4f502c233c956ee9b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 34c7ee922a9602b3448a72cd669fd68feeed1bba
Original-Change-Id: I1667c7f188b0f87c4bc7caa82f9c977b2b4c0611
Original-Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241772
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9811
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is a no-op change just sorting the CBMEM entries' definitions for
easy look up and comparison.
BRANCH=storm
BUG=none
TEST=Booted a storm device, observed the expected CBMEM entries
present in the console output.
Change-Id: I26365285f20ecb256918277b60e178cd61dc8213
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f140fd8d85ded30d1b89f5d4c64f8b9f31d6b27b
Original-Change-Id: Ibcd4f184ef1bade10ad677384f61243da7e3c713
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225259
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9810
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
This was added in upstream but not in Chromium OS where
pistachio support was developed.
Change-Id: I54f883776f19aa7bd357841731166e92d03145d8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9808
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
ChromeOS/vboot devices expect the TPM PCRs 0 and 1 to be extended with
digests that attest the chosen boot mode (developer/recovery) and the
HWID in a secure way. This patch uses the newly added vboot2 support
functions to fetch these digests and store them in the TPM.
CQ-DEPEND=CL:244542
BRANCH=veyron
BUG=chromium:451609
TEST=Booted Jerry. Confirmed that PCR0 contains the same value as on my
vboot1 Blaze and Falco (and PCR1 contains some non-zero hash).
Original-Change-Id: I7037b8198c09fccee5440c4c85f0821166784cec
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/245119
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 8b44e13098cb7493091f2ce6c4ab423f2cbf0177)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I549de8c07353683633fbf73e4ee62ba0ed72ff89
Reviewed-on: http://review.coreboot.org/9706
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The ramstage is loaded from romstage, so the LZMA scratchpad buffer used
to decompress it is part of the romstage BSS in SRAM. On RK3288, SRAM
cannot be cached which makes the decompression so slow that it's faster
to just load an uncompressed image from SPI. Disable ramstage
compression on this SoC to account for that.
[pg: implementation avoids restructuring all of Kconfig]
BRANCH=None
BUG=None
TEST=Built for Pinky and Falco, confirmed that the former didn't have
COMPRESS_RAMSTAGE in its .config and the latter still did. Measured a
speed-up of about 35ms on Pinky. (For some weird reason, the
decompression of the payload also takes way longer than on other
platforms, although not as long as the ramstage. I have no explanation
for that and can't really think of a good way to figure it out... maybe
the Cortex-A12 is just terrible at some operation that LZMA uses a lot?)
Change-Id: I9f67f7537696ec09496483b16b59a8b73f4cb11b
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/234192
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9792
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We recently restructured where the CBFS header is stored
and how it is looked up, with less magic. The RISC-V port
didn't get the memo, so have it follow the pack now.
Change-Id: Ic27e3e7f9acd55027e357f2c4beddf960ea02c4d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/9795
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
When CONFIG_MULTIPLE_CBFS_INSTANCES is enabled, the image is expected
to have CBFS instances in rw-a and rw-b sections of the bootrom.
This patch adds code which makes sure that CBFS header points at the
proper bootrpom section as determined by vboot, and the RW stages load
from that section.
BRANCH=storm
BUG=chrome-os-partner:34161, chromium:445938
TEST=with the rest of the patches in, STORM boots all the way into
Linux login prompt.
Original-Change-Id: I187e3d3e65d548c672fdf3b42419544d3bd11ea1
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237662
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 71ad0bb41b183374a84a5b9fb92c3afd813ceace)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia05cb713981c44da8cb379b72dfbe17fe1f6c5ff
Reviewed-on: http://review.coreboot.org/9704
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch aligns our verstage code to the new API addition in vboot2.
The hardware crypto functions are stubbed out by default and just
pretend that all algorithms are unsupported, causing vboot to fall back
to the normal software hashing code. These weak symbols can be
overridden by individual platform code to provide actual hardware
crypto engine support.
CQ-DEPEND=CL:236453
BRANCH=None
BUG=chrome-os-partner:32987
TEST=Booted Pinky, confirmed vboot falls back to software crypto.
Original-Change-Id: Idf6a38febd163aa2bff6e9a0e207213f01ca8324
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236435
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 9b5ee7f575f1aa3b0eb6ef78947ca93a4818f57b)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I6f0e19255a9bc5c5cd1767db76f1e47897ef0798
Reviewed-on: http://review.coreboot.org/9703
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this allows each board to decide what to do after firmware verification is
done. some board needs to return back to the previous stage and let the
previous stage kick off the verified stage.
this also makes it more visible what is going to happen in the verstage since
stage_exit now resides in main().
BUG=none
BRANCH=tot
TEST=booted cosmos dev board. booted blaze in normal and recovery mode.
built for all current boards.
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I3cb466cedf2a9c2b0d48fc4b0f73f76d0714c0c7
Original-Reviewed-on: https://chromium-review.googlesource.com/232517
(cherry picked from commit 495704f36aa54ba12231d396376f01289d083f58)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ic20dfd3fa93849befc2b37012a5e0907fe83e8e2
Reviewed-on: http://review.coreboot.org/9702
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The ipq806x UART is based on the same universal serial port which can
be also configured as i2c or SPI. Configuring it is not a trivial
task, so in case the kernel wants to use earlyprintk() the port needs
to be configured by the firmware.
Invoking uart_init() when the console is not enabled causes include
file collisions, which would require changes to more than 100 files.
Leaving this to another day, rearranging the ipq806x driver to be able
to invoke UART initialization function even when serial console is not
configured.
Also add a check to avoid initialization if UART has been already
set up.
BRANCH=storm
BUG=chrome-os-partner:35364
TEST=verified that storm console is still fully operational when
enabled, and that the kernel boots fine to the serial console
login prompt even if the firmware console is disabled.
Change-Id: Ibbbab875449f2ac2f0d6c504c18faf0da8251ffa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c512d6c1d0c0868137d1213ea84cd4bca58872db
Original-Change-Id: I421acba3edf398d960b5058f15d1abb80ebc7660
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240516
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9794
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Originally ported QCA UART driver used hardware accessor macros where
both address and data were represented by 32 bit integers. Coreboot
uses macros where addresses are represented by pointers, this make the
code more robust, as accidental swap between address and data does not
go unnoticed.
This patch converts ipq806x UART driver to use coreboot accessors. It
relies on gcc void pointer arithmetic considering objects pointed at
by void pointers to be one byte in size. Also replacing spaces with
hard tabs where appropriate.
BRANCH=storm
BUG=chrome-os-partner:34790
TEST=new code still boots fine on Storm with console output present.
Change-Id: I3ded9c338ff241bb1d839994f7296756aad8772d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 10616351704ebbcfcf25793ae974b256bc5bd6b0
Original-Change-Id: Ie15e09f9f3ea10a8566b6845219c2e09fed39218
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240514
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Reviewed-on: http://review.coreboot.org/9793
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To avoid entries with Type-C alternate mode devices disable
compliance mode entry. This needs to be set on both boot
and resume.
BUG=chrome-os-partner:35320
BRANCH=samus
TEST=manual:
1) boot on samus with USB keyboard plugged in -> controller in D0 at boot
2) iotools mmio_read32 0xe12080ec == 0x18010c01
3) suspend and resume
4) iotools mmio_read32 0xe12080ec == 0x18010c01
5) remove USB keyboard -> controller in D3
6) iotools mmio_read32 0xe12080ec == 0xffffffff
7) plug in USB keyboard -> controller in D0
8) iotools mmio_read32 0xe12080ec == 0x18010c01
9) boot with no external USB devices -> controller in D3 at boot
10) iotools mmio_read32 0xe12080ec == 0xffffffff
11) plug in USB keyboard -> controller in D0
12) iotools mmio_read32 0xe12080ec == 0x18010c01
Change-Id: I4d566112b3c188bafdf9a4bbd92944c89500e3e8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: db8c8ab8ff25f6a39cd50dcc91b5ba9fd7d05059
Original-Change-Id: I8b68ba75e254a7e236c869f4470207eb5290053d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/251361
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9782
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The following changes were made:
- order commands and options definitions alphabetically
- do not report errors at cbfs_image_from_file() call sites - the
error is reported by the function itself
- remove the unused parameter in cbfs_create_empty_entry() prototype
BRANCH=storm
BUG=none
TEST=compiled cbfstool, built a storm image, observed that the image
still boots
Change-Id: I31b15fab0a63749c6f2d351901ed545de531eb39
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a909a50e03be77f972b1a497198fe758661aa9f8
Original-Change-Id: I4b8898dbd44eeb2c6b388a485366e4e22b1bed16
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237560
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9746
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The previous patch introduced a bug where the new added case statement
was missing the break. There was no problem testing, because an
unrelated parameter structure field was being modified as a result.
BRANCH=storm
BUG=none
TEST=compiles and runs
Change-Id: Iaeb328048f61ffd57057ebce47f2ac8e00fc5aac
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 27ecc130569e4252e4627052f617130a2017c645
Original-Change-Id: Ib3e6c4c2b5c37588c612b8ab2672f6845c1b4ecb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239598
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
The new command allows to create a file where the original CBFS image
is duplicated at a different offset.
The required options of the new command are -D, the offset where the
copy CBFS header is placed, and -s, the size of the new CBFS copy.
When a CBFS is copied, the bootblock area of the source CBFS is
ignored, as well as empty and deleted files in the source CBFS. The
size of the destination CBFS is calculated as the rombase size of the
source CBFS less the bootblock size.
The copy instance can be created in the image only above the original,
which rules out the use of this new command for x86 images. If
necessary, this limitation could be addressed later.
As with other cbfstool commands, unless explicitly specified the
lowest CBFS instance in the image is considered the source. If
necessary, the user can specify the source CBFS using the -H option.
BRANCH=storm
BUG=chrome-os-partner:34161, chromium:445938
TEST=run multiple cbfstool commands on a storm image:
$ cd /tmp
$ cp /build/storm/firmware/image.serial.bin storm.bin
$ cbfstool storm.bin print
storm.bin: 8192 kB, bootblocksize 34472, romsize 458752, offset 0x8700
alignment: 64 bytes, architecture: arm
Name Offset Type Size
cdt.mbn 0x8700 raw 416
ddr.mbn 0x8900 raw 25836
rpm.mbn 0xee40 raw 78576
tz.mbn 0x22180 raw 85360
fallback/verstage 0x36f40 stage 41620
fallback/romstage 0x41240 stage 19556
fallback/ramstage 0x45f00 stage 25579
config 0x4c340 raw 2878
fallback/payload 0x4cec0 payload 64811
u-boot.dtb 0x5cc40 (unknown) 2993
(empty) 0x5d840 null 75608
$ cbfstool storm.bin copy -D 0x420000
E: You need to specify -s/--size.
$ cbfstool storm.bin copy -D 0x420000 -s 0x70000
$ cbfstool storm.bin print
W: Multiple (2) CBFS headers found, using the first one.
storm.bin: 8192 kB, bootblocksize 34472, romsize 458752, offset 0x8700
alignment: 64 bytes, architecture: arm
Name Offset Type Size
cdt.mbn 0x8700 raw 416
ddr.mbn 0x8900 raw 25836
rpm.mbn 0xee40 raw 78576
tz.mbn 0x22180 raw 85360
fallback/verstage 0x36f40 stage 41620
fallback/romstage 0x41240 stage 19556
fallback/ramstage 0x45f00 stage 25579
config 0x4c340 raw 2878
fallback/payload 0x4cec0 payload 64811
u-boot.dtb 0x5cc40 (unknown) 2993
(empty) 0x5d840 null 75608
cbfstool storm.bin print -H 0x420000
storm.bin: 8192 kB, bootblocksize 0, romsize 4784128, offset 0x420040
alignment: 64 bytes, architecture: arm
Name Offset Type Size
cdt.mbn 0x420040 raw 416
ddr.mbn 0x420240 raw 25836
rpm.mbn 0x426780 raw 78576
tz.mbn 0x439ac0 raw 85360
fallback/verstage 0x44e880 stage 41620
fallback/romstage 0x458b80 stage 19556
fallback/ramstage 0x45d840 stage 25579
config 0x463c80 raw 2878
fallback/payload 0x464800 payload 64811
u-boot.dtb 0x474580 (unknown) 2993
(empty) 0x475180 null 110168
$ cbfstool storm.bin remove -n config -H 0x420000
$ cbfstool storm.bin copy -H 0x420000 -D 0x620000 -s 0x70000
$ cbfstool storm.bin print -H 0x620000
storm.bin: 8192 kB, bootblocksize 0, romsize 6881280, offset 0x620040
alignment: 64 bytes, architecture: arm
Name Offset Type Size
cdt.mbn 0x620040 raw 416
ddr.mbn 0x620240 raw 25836
rpm.mbn 0x626780 raw 78576
tz.mbn 0x639ac0 raw 85360
fallback/verstage 0x64e880 stage 41620
fallback/romstage 0x658b80 stage 19556
fallback/ramstage 0x65d840 stage 25579
fallback/payload 0x663c80 payload 64811
u-boot.dtb 0x673a00 (unknown) 2993
(empty) 0x674600 null 113112
$ cbfstool /build/storm/firmware/image.serial.bin extract -n fallback/payload -f payload1
[..]
$ cbfstool storm.bin extract -H 0x620000 -n fallback/payload -f payload2
[..]
$ diff payload1 payload2
Change-Id: Ieb9205848aec361bb870de0d284dff06c597564f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b8d3c1b09a47ca24d2d2effc6de0e89d1b0a8903
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Change-Id: I227e607ccf7a9a8e2a1f3c6bbc506b8d29a35b1b
Original-Reviewed-on: https://chromium-review.googlesource.com/237561
Reviewed-on: http://review.coreboot.org/9742
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There potentially could be multiple CBFS instances present in the
firmware image. cbfstool should be able to operate on any of them, not
just the first one present.
To accomplish that, allow all CBFS commands to accept the -H parameter
(which specifies the exact CBFS header location in the image).
If this parameter is specified, the image is not searched for the CBFS
header, only the specified location is checked for validity, If the
location is valid, it is considered to be the CBFS header, if not -
the tool exits with an error status.
Note, that default behavior of the tool does not change.
BRANCH=storm
BUG=chrome-os-partner:34161, chromium:445938
TEST=run the following experiments:
- examined an image with three CBFS instances, was able to print all
of them.
- built a rambi coreboot image and tried the following (cbfstool output abbreviated):
$ ./util/cbfstool/cbfstool /build/rambi/firmware/coreboot.rom print
coreboot.rom: 8192 kB, bootblocksize 2448, romsize 8388608, offset 0x700000
alignment: 64 bytes, architecture: x86
Name Offset Type Size
cmos_layout.bin 0x700000 cmos_layout 1164
...
(empty) 0x7ec600 null 77848
$ \od -tx4 -Ax /build/rambi/firmware/coreboot.rom | tail -2
7ffff0 fff67de9 000000ff fff6dfe9 fffff650
800000
$ ./util/cbfstool/cbfstool /build/rambi/firmware/coreboot.rom print -H 0x7ff650
coreboot.rom: 8192 kB, bootblocksize 2448, romsize 8388608, offset 0x700000
alignment: 64 bytes, architecture: x86
Name Offset Type Size
cmos_layout.bin 0x700000 cmos_layout 1164
...
(empty) 0x7ec600 null 77848
$ ./util/cbfstool/cbfstool /build/rambi/firmware/coreboot.rom print -H 0x7ff654
E: /build/rambi/firmware/coreboot.rom does not have CBFS master header.
E: Could not load ROM image '/build/rambi/firmware/coreboot.rom'.
$
Change-Id: I64cbdc79096f3c7a113762b641305542af7bbd60
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 86b88222df6eed25bb176d653305e2e57e18b73a
Original-Change-Id: I486092e222c96c65868ae7d41a9e8976ffcc93c4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237485
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/9741
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Move reset support into the Intel common branch. Prevent breaking of
existing platforms by using a Kconfig value to select use of the common
reset code.
BRANCH=none
BUG=None
TEST=Build and run on Glados
Change-Id: I5ba86ef585dde3ef4ecdcc198ab615b5c056d985
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 85d8a6d9628a66cc8d73176d460cd6c5bf6bd6b2
Original-Change-Id: I5048ccf3eb593d59301ad8e808c4e281b9a0aa98
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/248301
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/9505
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add support for applying write protection to the MRC cache
region in SPI flash.
This is only enabled if there is write protect GPIO that is
set, and the flash status register reports that the flash
chip is currently write protected.
Then it will call out to a SOC specific function that will
enable write protection on the RW_MRC_CACHE region of flash.
The implementation is not quite as clean as I would like because
there is not a common flash protect interface across SOCs so
instead it relies on a new Kconfig variable to be set that will
indicate a SOC implements the function to protect a region of
SPI flash.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=build and boot on samus
1) with either WPSW=0 or SRP0=0 the PRR is not applied
2) with both WPSW=1 and SRP0=1 the PRR is applied
Change-Id: If5907b7ddf3f966c546ae32dc99aa815beb27587
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a3e0e71dfd7339aab171a26b67aec465a3f332d6
Original-Change-Id: I94e54e4723b1dcdacbb6a05f047d0c0ebc7d8711
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241170
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9494
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Serial port on ITE 8772 SuperIO must be initialized before
console_init is called. So the pre console init callback
is added to let mainboard code do proper initialization.
Change-Id: Iaa3e4b9c6e7ce77a7b9a6b9ecedd8ea54f3141dc
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 71ee2fd470e19fa4854f895678445b05c17761c1
Original-Change-Id: I594e6e4a72f65744deca5cad666eb3b227adeb24
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/227933
Original-Reviewed-by: Kenji Chen <kenji.chen@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9472
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
I doubt anybody will ask for the configuration and request that
0 bytes be returned, but AFAICS that's legal, so let's support it.
Should have no effect on ChipIdea since it knows not to send more
data than requested by the host.
BRANCH=none
BUG=none
TEST=none
Change-Id: Ibfe57b593015fa5e0381c45ff9e39c3f912b4d4d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 45555e929d9d07dbb58ecfd18333f26375a0e3d7
Original-Change-Id: I7432772a1812c6f52c2b1688ee4c6f67d02ccf28
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/258064
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9790
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Only set internal variables when there's no risk of breaking things.
BRANCH=none
BUG=none
TEST=none
Change-Id: I8a8b63f60bdb70fad38130ce38eef81fe3725aa2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7119829096b444b790937b116fb782bcb5da70cd
Original-Change-Id: If698b11a7ff7688def310d8574fcfa7a40f703c1
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/258063
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9789
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
First handle IN packets, then OUT packets and finally SETUP packets.
This makes OS X happy. It isn't implemented as the data sheet recommends
but it avoids implementing a state machine and should always produce
observable effects identical to that of the stateful solution.
BRANCH=none
BUG=none
TEST=`fastboot getvar version` on OSX works
Change-Id: Ic7b27387771d6a7794fba12fc822fccc48770ea8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f0e59547519d50b1d34f6abdc6132330125f94f3
Original-Change-Id: Iada1cff011f11e7d5cb1a1b34896ab590f488ec7
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/258062
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9788
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
SET_CONFIGURATION(0) stops operation and is moves the
device to addressed mode.
BRANCH=none
BUG=none
TEST=USB device mode still works
Change-Id: I964d90ba8440b6f428896acc9fe63e1114390da6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 402bc907222d07765b3438967edf26cc1a79d775
Original-Change-Id: Iebad024e1ed2e344dba73b73a9b385a4ac4cb450
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/250791
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9785
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some IN transfers must be terminated by an empty packet
because otherwise the host wouldn't know.
The zlp() function determines this requirement in
accordance to USB rules: If the transfer's size is aligned
to the maximum packet size, and the host expects a larger
transfer, add the empty packet as a hint.
BRANCH=none
BUG=none
TEST=USB device mode still works
Change-Id: Ia69f3d017f72a3a0e0b21bac72fe97be184c7daa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fd0e946e4948a74a9ed15a5eed6ce827b7672a56
Original-Change-Id: I8153cc5bd2ff1c88e383c1dbcddaf1bf72f9194c
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/250790
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9784
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a framework for USB device mode controllers
and a driver for the ChipIdea controller which
is part of the tegra platform.
TODO:
- fix USB detach/attach
- implement zero length packet handling properly
BUG=chrome-os-partner:35861
TEST=none
BRANCH=none
Change-Id: I8defeea78b5a3bdbf9c1b1222c2702eaf3256b81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 542332291880c4026a05a960ceb91d37891ee018
Original-Change-Id: Ib4068d201dd63ebeda80157bd3130f3059919cdd
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/243272
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8756
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This check verifies that all mainboard vendors
and boards have a Kconfig.name entry.
Change-Id: I3ed3bfa0d3f78e55a8d54918f5f3f29f51068e48
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9707
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This change switches all mainboard vendors and mainboards
to be autoincluded by Kconfig, rather than having to be mentioned
explicitly.
This means, vendor and mainboard directories are becoming more
"drop in", e.g. be placed in the coreboot directory hierarchy
without having to modify any higher level coreboot files.
The long term plan is to enable out of tree mainboards / components
to be built with a given coreboot version (given that the API did
not change)
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: Ib68ce1478a2e12562aeac6297128a21eb174d58a
Reviewed-on: http://review.coreboot.org/9295
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
this is not only for speed but also preventing the cpu from crashing.
the cpu is not happy when cache is cleaned without mmu turned on.
BUG=chrome-os-partner:36691
BRANCH=broadcom-firmware
TEST=boot purin to romstage.
Change-Id: I2445dcc2729798c4fc56fa191cbc8471ef708d08
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9e35c925b75213e1d35bf191f22c39aaf1726eeb
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Icaf8c506df258edb99413949e6e3089a2b1a91af
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199388
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/251306
Reviewed-on: http://review.coreboot.org/9768
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
we also pick no RETURN_FROM_VERSTAGE.
BUG=none
BRANCH=broadcom-firmware
TEST=booted b0 board
Change-Id: Iddd95f233a614187ae6b26f351a289c23f25742f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 243598925333982b40297adad878c461990d7d70
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I6ab96628cecb84e061777cc85d6d572823f6d63c
Original-Reviewed-on: https://chromium-review.googlesource.com/251303
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9767
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Andrew Bresticker