Move interrupt status and wake status clearing to after GPIO config so
that configuration does not incorrectly set interrupt or wake status.
i.e. when PULL_UP is configured on a pad, it incorrectly sets in the
interrupt status bit. Thus, the interrupt status bit must be cleared
after initial pad configuration is complete.
BUG=b:164892883, b:165342107
TEST=None
BRANCH=None
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: If4a5db4bfa6a2ee9827f38e9595f487a4dcfac2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Each variant WiFi SAR CBFS will be added with the default name
"wifi_sar_defaults.hex".
so we just need to look up the default CBFS file as the WiFi SAR
source.
BUG=b:159304570
BRANCH=zork
TEST=1. cros-workon-zork start coreboot-private-files-zork
2. emerge-zork chromeos-config coreboot-private-files-zork \
coreboot chromeos-bootimage
Change-Id: Idf859c7bdeb1f41b5144663ba1762e560dcfc789
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44672
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Jasper Lake SoC had PCI root port mapping swap, thats why we were
using swapped mapping earlier for all the boards
Recently, patch was pushed to handle this swap in PCI enumeration code
for Jasper Lake and we need to correct this mapping. Now this mapping
aligns with actual port mapping in the schematics
BUG=None
BRANCH=None
TEST=NVMe and WLAN are getting detected after this changes
Change-Id: Ide5f8419a15f559cefeb6039f155fabf97c279f8
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
pmc_set_acpi_mode will set EC SMI mask to 1 in the end.
However google_chromeec_events_init will clear EC SMI mask.
If google_chromeec_events_init is ran after pmc_set_acpi_mode, the EC SMI mask
will be 0 in depthcharge and causes lidclose function not working.
So, pmc_set_acpi_mode() should run after google_chromeec_events_init.
This code is mainly from CB:42677
BUG=b:16338215
TEST=Close lid in depthcharge and the dut can be shutdown on waddledoo.
Signed-off-by: Kane Chen <kane.chen@intel.com>
Change-Id: I0f06e8b5da00eb05a34a6ce1de6d713005211c08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Configure gpio settings for FPMCU on Halvor.
BUG=b:153680359
TEST=After flash FP MCU FW, during bootup we see spi id spi-PRP0001:01 in dmesg.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I5503cfe0fb9933e98ed01afeef8cad1345593ac6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44575
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Halvor uses TBT 0/1/2 for USB type C. We doesn't use PCIE/USB3 port
therefore disable PCIE/USB3 ports and enable TBT 2.
Follow volteer to set USB2 OC_SKIP.
BUG=b:165175296
BRANCH=none
TEST=Check all USB ports USB2 and USB3 both functional
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ifb844ce475f3d58f0c95be0f172fc49edb4cd5fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
default_memmove() calls memcpy() when (src > dst). This is safe for the
default_memcpy() implementation, but just calling memcpy() may invoke an
architecture-specific implementation. Architectures are free to
implement memcpy() however they want and may assume that buffers don't
overlap in either direction. So while this happens to work for all
current architecture implementations of memcpy(), it's safer not to rely
on that and only rely on the known implementation of default_memcpy()
for the forwards-overlapping case.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I7ece4ce9e6622a36612bfade3deb62f351877789
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create areas for console & timestamp data in psp_verstage and pass it to
the x86 to save for use later.
BUG=b:159220781
TEST=Build & Boot trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I41c8d7a1565e761187e941d7d6021805a9744d06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
- FSP enables IPU (Imaging Processing Unit) by default even if its
disabled in devicetree. We need to fill FSP upd based on the device
enablement in devicetree.
- Enable Vtd IPU and IGD settings only if respective IPs are enabled.
BUG=165340186
BRANCH=None
TEST=IPU is disabled and doesn't show in lspci.
Change-Id: Ieff57fb0ebc8522546d6b34da6ca2f2f845bf61d
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44627
Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com>
Reviewed-by: John Zhao <john.zhao@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPP_D16 is routed to the main power enable pin on several PCIe SD card
controllers on SD daughterboards. We should enable the power to these
chips as early as possible so they can participate in PCIe
enumeration.
BUG=b:162722965
TEST=Verified RTS5261 and GL9755 daughterboards enumerate on PCI and
can read SD cards.
Change-Id: Icf5e770f540e5d1e27b40f270bb004f4196bc7be
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
JSL FSP support FSP 2.2. FSP 2.2 introduces Multiphase SI init
support through the FSP-S arch UPD. The FSP-S arch UPD structure
is added in edk2 stable 2020 branch. Switching the support for
JSL to edk2-stable202005 to intercept the FSP2.2 related support.
BUG=b:162184827
BRANCH=None
TEST=Build and boot JSLRVP
Cq-Depend: chrome-internal:3221772
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Change-Id: Ieed1b58e491d5a89043c418f0f44f2ee9af111f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44576
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move a size of DDR3 SPD memory (always 256 bytes) to a common define.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I80c89ff6e44526e1d75b0e933b21801ed17c98c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Introduce FSPT_ARCH_UPD and FSPS_ARCH_UPD to support debug events
and multi-phase silicon initialization.
For backward compatibility the original structures are kept and
new ARCH_UPD structures will be included only when UPD header
revision equal or greater than 2.
ref:
- https://bugzilla.tianocore.org/show_bug.cgi?id=2781
BUG=b:162184827
BRANCH=None
TEST=Build and boot JSLRVP
Cq-Depend: chrome-internal:3221772
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Change-Id: I728aff1df3d361e21e4617647c4ec0e2d345a8c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Add charger input current throttling for drawcia system
BUG=None
BRANCH=None
TEST=Built and tested on drawcia system
Change-Id: I34fdc23fcd84b5c27c2bada769f7a9049c2a56a5
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This field eventually gets interpreted as MT/s by SMBIOS instead of MHz. Translate from Mhz to MT/s by multiplying by 2.
BUG=b:154654737
TEST=dmidecode -t 17 matches expected speed
Change-Id: I51b58cb0380f2a2bf000347395ac918ac0717060
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In the presence of self-relocating payloads, it's safer to keep
physical addresses in `libsysinfo`. This updates the remaining
pointers that are not consumed by libpayload code, all of them
strings.
Also update the comment that `libsysinfo` only containts physical
addresses.
Change-Id: I9d095c826b00d621201c34b329fb9b5beb1ec794
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In the presence of self-relocating payloads, it's safer to keep
physical addresses in `libsysinfo`. This updates all the references
to CBMEM entries that are not consumed inside libpayload code.
Change-Id: I3be64c8be8b46d00b457eafd7f80a8ed8e604030
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
In the presence of self-relocating payloads, it's safer to keep
physical addresses in `libsysinfo`. This updates all the references
to coreboot-table entries that are not consumed inside libpayload
code.
Change-Id: I95cb0af151e0707a1656deacddb8a5253ea38fc3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Our AArch64 code supports dynamic framebuffer allocation which
makes it necessary to change the framebuffer information during
runtime. Having a pointer inside `libsysinfo` made a mess of it
as the pointer would either refer to the original struct inside
the coreboot table or to a new struct inside payload space. The
latter would be unaffected by a relocation of the payload.
Instead of the pointer, we'll always keep a copy of the whole
struct, which can be altered on demand without affecting the
coreboot table. To align the `video/graphics` driver with the
console driver, we also replace `fbaddr` with a macro `FB` that
calls phys_to_virt().
Change-Id: I3edc09cdb502a71516c1ee71457c1f8dcd01c119
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In the presence of self-relocating payloads, it's safer to keep
physical addresses in `libsysinfo`.
Change-Id: Icd30e95c6b8115d16dd793914fb01a1a9da1854f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In the presence of self-relocating payloads, it's safer to keep
physical addresses in `libsysinfo`.
Change-Id: I64a37bef263022edb504086c02a3fd22ce068ba4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Same as with other consoles and drivers that cache an address
outside the payload (e.g. video/corebootfb), we should store the
physical address, so we can derive the virtual address on demand.
This makes it save to use the address across relocations.
As a first step in migrating `libsysinfo` to `uintptr_t`, we
also switch to the physical address there.
Fixes the default build of FILO, tested with Qemu/i440FX and Qemu/Q35.
Change-Id: I4b8434af69e0526f78523ae61981a15abb1295b0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add downgrade support for CSE RW firmware.
When CSE FW is downgraded, CSE may get into data compatibility issues.
To avoid such issues, coreboot sends DATA CLEAR HECI command to CSE to
clear CSE run time data on proactive basis during a downgrade and
when CSE indicates a data mismatch error through GET_BOOT_PARTITION_INFO.
BUG=b:144894771
TEST=Verified on hatch
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I0a3a3036e448e5a743398f6b27e8e62965dbff3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40561
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Closing stdout early seems to have a detrimental effect on kconfig on a
system under high load (e.g. when doing lots of builds in parallel).
Change-Id: I6987f1deac596124c7b397bf7bc5a78d691cc538
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix compilation under x86_64.
Tested on HP Z220:
* Still boots on x86_32.
Change-Id: I2a3ac3e44a77792eabb6843673fc6d2e14fda846
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The code can only be compiled as x86_32. Mark it as such to fix errors
in the x86_64 assembler. The caller has to make sure to call this code
in protected mode only.
Tested on HP Z220:
* Still boots on x86_32.
Change-Id: I4c0221fb3886b586c22fe05e36109fcdc20b7eed
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Enter long mode on secondary APs.
Tested on Lenovo T410 with additional x86_64 patches.
Tested on HP Z220 with additional x86_64 patches.
Still boots on x86_32.
Change-Id: I916dd8482d56c7509af9ad0d3b9c28bdc48fd0b1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The zork devices use the ACP (audio co-processor) and the I2S interface
for audio and not the HDA (HD audio) device and interface.
BUG=b:158535201,b:162302028
BRANCH=zork
TEST=Equivalent change on Mandolin disabled the non-GPU HDA device with
the corresponding FSP change applied.
Change-Id: I6c7de881cff8398fe416151fab219142d4fc904a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP has recently added support for a UPD switch to disable the non-GPU
HD Audio controller. This change adds the coreboot side of the feature.
To avoid having two HD Audio enable options, the value of the
hd_audio_enable UPD is determined by the enable state of the non-GPU HD
Audio controller in the platform devicetree.
BUG=b:158535201,b:162302028
BRANCH=zork
TEST=With the corresponding FSP change applied the non-GPU HD Audio
device is hidden when switched off in devicetree and remains present and
functional when switched on in devicetree.
Change-Id: Ib2965e0742f4148e42a44ddad8ee05f0c4c7237e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44680
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 65605276a4.
This patch shouldn't have been merged yet, since the issues on the FSP
side aren't sorted out yet, so the FSP-side changes haven't landed yet.
This byte will be used for an audio-related setting instead to have the
audio settings grouped together.
BRANCH=zork
Change-Id: If79900f3a92fd949d7653001e1ca2faac7061e3c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44678
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Josie Nordrum