Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities. Haven't checked the reference
code, but the register descriptions suggested that the register in
Mullins behaves similar to the one in Stoneyridge. Right now this code
is unused, but it's probably still a good idea to fix it.
TEST=Booting Debian 11 with kernel 5.10 on apu2 still works when adding
a call to hudson_set_spi100 with this patch applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifbd960a9509542b28f03326a3066995540260bef
Tested-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities of the SPI interface. The
reference code for Stoneyrige also only sets the SPI_USE_SPI100 bit and
doesn't zero out the other bits.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d32fc2084bb34ea57924bae68511c6836587790
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities of the SPI interface. The
reference code for both Picasso and Cezanne also only sets the
SPI_USE_SPI100 bit and doesn't zero out the other bits.
TEST=Verified that Mandolin still boots. It didn't show any signs of
possibly related instabilities before though, so this test doesn't say
much.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71c2ec1729d5cb4cdff6444b637af29caaa6f1c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
commit 90ac882a32 (soc/amd/common/block/
spi: introduce SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST) introduced a Kconfig
option to enable/disable the 4DW burst support in the SPI flash data
prefetcher, but missed to update the documentation above the
fch_spi_early_init prototype, so update the outdated documentation now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I07c4b0b02251da63d34a172e2636894e99845d6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Disable SMM_ASEG and select NO_SMM since the platforms do not use SMM.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I47237421c3dd5bd043447831263d72c9956cdaf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Current log2_ceil(x) is defined as log2(x * 2 - 1). When x is larger
than (1 << 31), (x * 2 - 1) won't fit in u32, leading to incorrect
result. Therefore, correct it as (log2(x - 1) + 1). Also add unit tests
for inline functions in lib.h.
BUG=none
TEST=make tests/lib/lib-test
BRANCH=none
Change-Id: If868f793b909a6ad7fc48a7affac15e2c714fa2e
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
These functions can't be weak, because they actually need to configure
the GPIOs for eSPI and the TPM. With this change zork boots again.
I also noticed that zork doesn't use the early table in bootblock. This
means that zork will only boot if psp_verstage is enabled.
BUG=b:209465425
TEST=boot zork to ramstage
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I384fd578efe7da0a3d74829cccf38c3ed524f130
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Use KiB and MiB instead of multiplying/dividing with/by the numeric
value when doing region size calculations.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I56c380190b11aa3214cce31b82974327e3d15000
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Unit tests fail on clang 13.0 because Cmocka's main() function is
declared with return type int, but through some of our chain-include
games it sometimes gets coreboot's main_decl.h which declares the
function as void. Compilers have traditionally always been very
laissez-faire about the signature of the main function, but it seems
that clang has been getting more strict by default recently. Explicitly
disable the related warning to shut it up.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I867c9dac659be86e7b7cf4cc41d6fa105aa9ac41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Unit tests fail on clang 13.0 with a cryptic
error: _timestamp_size changed binding to STB_WEAK [-Werror,-Wsource-mgr]
Probably something related to the weird things we do to mock memlayout
areas. Too lazy to track it down. Let's just disable this
(clang-specific, not properly documented) warning flag.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ie49c9eef3c74592c068c899c6717621dbcb9f609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
The placement calculation logic in cbfs_add_component() has become quite
a mess, and this patch can only fix that to a limited degree. The
interaction between all the different pathways of how the `offset`
variable can be set and at what point exactly the final placement offset
is decided can get quite convoluted. In particular, one existing problem
is that the offset for a file added with the --align flag is decided
before the convert() function is called, which may change the form (and
thereby the size) of the file again after its location was found --
resulting in a location that ends up being too small, or being unable to
find a location for a file that should fit. This used to be okay under
the assumption that forced alignment should really only be necessary for
use cases like XIP where the file is directly "used" straight from its
location on flash in some way, and those cases can never be compressed
-- however, recent AMD platforms have started using the --align flag to
meet the requirements of their SPI DMA controller and broken this
assumption.
This patch fixes that particular problem and hopefully eliminates a bit
of the convolution by moving the offset decision point in the --align
case after the convert() step. This is safe when the steps in-between
(add_topswap_bootblock() and convert() itself) do not rely on the
location having already been decided by --align before that point. For
the topswap case this is easy, because in practice we always call it
with --base-address (and as far as I can tell that's the only way it was
ever meant to work?) -- so codify that assumption in the function. For
convert() this mostly means that the implementations that do touch the
offset variable (mkstage and FSP) need to ensure they take care of the
alignment themselves. The FSP case is particularly complex so I tried to
rewrite the code in a slightly more straight-forward way and clearly
document the supported cases, which should hopefully make it easier to
see that the offset variable is handled correctly in all of them. For
mkstage the best solution seems to be to only have it touch the offset
variable in the XIP case (where we know compression must be disabled, so
we can rely on it not changing the file size later), and have the extra
space for the stage header directly taken care of by do_cbfs_locate() so
that can happen after convert().
NOTE: This is changing the behavior of `cbfstool add -t fsp` when
neither --base-address nor --xip are passed (e.g. FSP-S). Previously,
cbfstool would implicitly force an alignment of 4K. As far as I can tell
from the comments, this is unnecessary because this binary is loaded
into RAM and CBFS placement does not matter, so I assume this is an
oversight caused by accidentally reusing code that was only meant for
the XIP case.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia49a585988f7a74944a6630b77b3ebd79b3a9897
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Remove global variables `sblink` and `node_nums` and add function
`get_node_nums()` which reads from PCI config once and returns a static
variable.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I20a47f967093ef91355377c164656cabadc30fe6
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add a list of gpios to lock for brya. This currently includes
GPIOs connected to the FPMCU.
BUG=b:201430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: Idea42a58575c280be0770d38f934acdf5508c45d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change supplies a list of ADL gpios that are connected to non-host
(x86) controllers and should be locked after initial configuration.
Set SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS to enable GPIO locking.
BUG=b:210430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: I457bab39f945ab31a89542c6498a73af70cbf9ee
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
For added security, there are some gpios that an SoC will want to lock
once initially configured, such as gpios attached to non-host (x86)
controllers, so that they can't be recofigured at a later point in
time by rogue code.
Likewise, a mainboard may have some gpios connected to secure busses
and/or devices that they want to protect from being changed post
initial configuration.
This change adds a generic gpio locking mechanism that allows the SoC
to export a list of GPIOs to be locked down and allows the mainboard
to export a list of GPIOs that it wants locked down once
initialization is complete.
Use the SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS Kconfig option to
enable this feature.
BUG=b:201430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify
brya0 boots successfully to kernel.
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Change-Id: I42979fb89567d8bcd9392da4fb8c4113ef427b14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update configs so that they work with NixOS 21.11. Drop `iasl` package
since it was replaced with `acpica-tools`.
Change-Id: Icb9a382b83b3b3e55126bb0bb508659d11497a05
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
endian.h wasn't included (although it probably came in as an indirect
include) but in some header sets _XOPEN_SOURCE overrides _DEFAULT_SOURCE
whereas the latter is a super set of the former:
We should get the same things as with _XOPEN_SOURCE (such as memccpy for
which it has been defined) but also extra features like htole32.
Change-Id: Iaee7495b2ae64fdc719ae0879ea95fe7df286212
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
We only have ADL-P 6+8+2 (45W) VR configuration now. Based on the
power map, fill in correct ADL-P 6+8+2 (28W) VR configuration.
BUG=b:202486131
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: Ie8dbd95b2d8e49b5898b2a97aff72e0e64868c8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add Alder Lake-N case for adl_cpu_type and get_supported_lpm_mask.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: If2917ac356fd80f84bcaf70ed710d329e77f7a6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Disable LEGACY_SMP_INIT to enable PARALLEL_MP.
Also remove a large amount of APIC code that is now unnecessary.
TEST=Boot on PC Engines apu3
Boot time reduced from 1.707 seconds to 1.620 seconds average across
5 coldboots.
Inspired by CB:59693
Change-Id: Ib49e7d3f5956ac7831664d50db5f233b70aa54db
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
With CPU_INFO_V2 enabled %gs holds the pointer to the cpu_info struct,
so don't clobber it. Backup and restore %gs where possible.
Fixes a crash in MPinit seen after calling FSP-S.
Change-Id: If9fc999b34530de5d8b6ad27b9af25fc552e9420
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch removes all remaining pieces of the old CBFS API, now that
the last straggling use cases of it have been ported to the new one
(meaning cbfs_map()/cbfs_load()/etc... see CB:39304 and CB:38421).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1cec0ca2d9d311626a087318d1d78163243bfc3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Remove unnecessary escape bachslashes from:
addr="$(echo \"$$$$sym_line\" ...
The 'echo' will print output line with double quote characters, which
then will be included in the values passed to --add-symbol. This can
cause errors.
Change-Id: I6023515191d6c236bf57870159a35d518f25e9d8
Reported-by: Yu-Ping Wu <yupingso@chromium.org>
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The patch refectors cpu_set_p_state_to_max_non_turbo_ratio(). The
function is updated to use cpu_get_max_non_turbo_ratio().
TEST=Build the code for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If73df17faaf7b870ae311460a868d52352683c0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The patch defines below APIs :
cpu_is_hybrid_supported() : Check whether CPU is hybrid CPU or not.
cpu_get_bus_frequency() : Get CPU's bus frequency in MHz
cpu_get_max_non_turbo_ratio() : Get CPU's max non-turbo ratio
cpu_get_cpu_type() : Get CPU type. The function must be called if
executing CPU is hybrid.
TEST=Verified the APIs on the Brya board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I680f43952ab4abce6e342206688ad32814970a91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds the setting of PsysPmax to 143 W according to
gimble board design.
BUG=b:206990759
TEST=emerge-brya coreboot chromeos-bootimage & ensure the value is
passed to FSP by enabling FSP log & Boot into the OS
Change-Id: Id6a203f05ecfcc1020a422850d35fa3fa64e01d0
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ryan Lin <ryan.lin@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This enum is useful to have around for more than just the one file, so
move it to a common header file, and while we're there, also add an
option for UNKNOWN.
TEST=boot test on brya0
Change-Id: I9ccf0ed9504dbf6c60e521a45ea4b916d3dcbeda
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Some acpigen code may use mutexes, and it is a common idiom to pass
a value for the Timeout field of 0xffff, which is interpreted by OSPM
to mean "no timeout". Therefore add a macro for this value.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I16bc9f3f04dd1e3dc0f3eca3e56377e6f48132b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Eject event is high. Set wake event to active high. The polarity of the SCI and the wakeup_event_action for the pen ejection feature were both
backwards, and was causing the system to fail to enter sleep states
because the event was always asserted.
BUG=b:208937710
TEST=only release switch can wake system.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I568e9175c7a66599f7a525c32e4def7a79b55a0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Fixes commit 29c7622 ("cpu/x86/mp_init.c: Fix building with no
smihandler") broke SMM init because is_smm_enable() was called before
smm_enable.
Rework the code a little to make it clear what codepaths are used with
CONFIG_HAVE_SMI_HANDLER.
TESTED: now prodrive/hermes boots again.
Change-Id: If4ce0dca2f29754d131dacf2da63e946be9a7b6d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59912
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use ed25519 keys because recent changes to RSA keys in OpenSSH are
making a mess.
Also update references to the Gerrit UI to match the current version.
Change-Id: Ib13836feb6968307d2c8b3022cb0c859dac89bb8
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The stryke project/mainboard never ended up being built and was
cancelled early on, therefore remove it from the tree.
Change-Id: I4d91fbd4ba0abe0cf599e8e75f04398ef9ff5222
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Check the Alderlake CPU ID to determine if cse sub-paritition update is
required or not.
BUG=b:202143532
Change-Id: Icae21dad56ed4a1edea1f641b3d5bccc3943f831
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds the following support to coreboot
1. Kconfig to add IOM/NPHY in the COREBOOT/FW_MAIN_A/FW_MAIN_B
partition of BIOS
2. Helper functions to support update.
Pre-requisites to enable IOM/NPHY FW Update:
1. NPHY and IOM blobs have to be added to added COREBOOT, FW_MAIN_A and
FW_MAIN_B through board configuration files.
CONFIG_SOC_INTEL_CSE_IOM_CBFS_FILE: IOM blob Path
SOC_INTEL_CSE_NPHY_CBFS_FILE: NPHY blob path
2. Enable CONFIG_CSE_SUB_PARTITION_UPDATE to enable CSE sub-partition
NPHY/IOM update.
coreboot follows below procedure to update NPHY and IOM:
NPHY Update:
1. coreboot will navigate through the CSE region,
identify the CSE’s NPHY FW version and BIOS NPHY version.
2. Compare both versions, if there is a difference, CSE will trigger an
NPHY FW update. Otherwise, skips the NPHY FW update.
IOM Update:
1. coreboot will navigate through the CSE region, identify CSE's IOM
FW version and BIOS IOM version.
2. Compares both versions, if there is a difference, coreboot will
trigger an IOM FW update.Otherwise, skip IOM FW update.
Before coreboot triggers update of NPHY/IOM, BIOS sends SET BOOT
PARTITION INFO(RO) to CSE and issues GLOBAL RESET commands if CSE
boots from RW. coreboot updates CSE's NPHY and IOM sub-partition only
if CSE boots from CSE RO Boot partition.
Once CSE boots from RO, BIOS sends HMRFPO command to CSE, then
triggers update of NPHY and IOM FW in the CSE Region(RO and RW).
coreboot triggers NPHY/IOM update procedure in all ChromeOS boot
modes(Normal and Recovery).
BUG=b:202143532
BRANCH=None
TEST=Build and verify CSE sub-partitions IOM and NPHY are getting
updated with CBFS IOM and NPHY blobs.
Verified TBT, type-C display, NVMe, SD card, WWAN, Wifi working after
the update.
Change-Id: I7c0cda51314c4f722f5432486a43e19b46f4b240
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds a check to determine if the CSE's current operation mode
is ME_HFS1_COM_SECOVER_MEI_MSG or not before sending HMRFPO_ENABLE
command to CSE. If CSE is already in the ME_HFS1_COM_SECOVER_MEI_MSG,
coreboot skips sending HMRFPO_ENABLE command to CSE to unlock the CSE RW
partition.
TEST=Verify sending HMRFPO_ENABLE command on Brya system.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I387ac7c7296ab06b9bb440d5d40c3286bf879d3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The patch renames the compare_cse_version() function to the
cse_compare_sub_part_version(). It makes the function generic so that
it can be used to compare version of any CSE sub-partition like IOM,
NPHY etc.
TEST=Verified build for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I88a44a3c0ba2ad8a589602a35ea644dab535b287
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59689
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduce the `SOC_INTEL_ALDERLAKE_PCH_N` Kconfig option and use it to
specify the correct amount of PCIe I/O.
Document number 645550 indicates that Alder Lake-N has 12 PCH root ports
and no CPU root ports.
Document number 645548 indicates ADL-N has 5 clock sources and 5 clock
request signals.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I7ebbcdcdb1ccc34b80ec71ac3e591fe4ad6b1904
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch moves the CBFS file measurement when CONFIG_TPM_MEASURED_BOOT
is enabled from the lookup step into the code where a file is actually
loaded or mapped from flash. This has the advantage that CBFS routines
which just look up a file to inspect its metadata (e.g. cbfs_get_size())
do not cause the file to be measured twice. It also removes the existing
inefficiency that files are loaded twice when measurement is enabled
(once to measure and then again when they are used). When CBFS
verification is enabled and uses the same hash algorithm as the TPM, we
are even able to only hash the file a single time and use the result for
both purposes.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I70d7066c6768195077f083c7ffdfa30d9182b2b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add WiFi SAR table for felwinter.
BUG=b:206901900
TEST=emerge-brya chromeos-config chromeos-config-bsp-private
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
and checked SAR table can load by WiFi driver.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I0de710f4447302ee545a67cbd79373bdd2077637
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Change HID name from INT3499 to PRP0001 along with size and
address width. Size decreased from 10K to 2K, address width
decreased from 14 to 8.
BUG=b:203014972
Test= Boot board and issue commands:
`cat /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom >
./brya_imx208_eeprom.bin`
`hexdump -C brya_imx208_eeprom.bin > brya_imx208_eeprom_dump.log`
You should see the result in brya_imx208_eeprom_dump.log to be
same as module nvm file by vendor provided or meet the Intel nvm
calibration format.
(e.g. first 4 bytes be 0x01, 0x03, 0x01, 0x00)
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Ib2366ba4c8bb70d8cc82e64ca585b118a96260c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Felix Held