Both SMM_ASEG and SMM_TSEG choices work.
There is periodic TCO timeout occurring.
At least with DEBUG_SMI kernel reports low memory corruption.
Change-Id: If20a7092117612a1a9e25eb6ac480e105acd57d7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This reverts commit 9f0e21a4da.
It should be allowed for i82801gx/early_init.c to have
#include <southbridge/intel/common/pmutil.h>
But there is a conflict:
src/southbridge/intel/common/pmutil.h:
#define TCO1_CNT 0x68
src/southbridge/intel/common/tco.h:
#define TCO1_CNT 0x08
Followup works resolve the difficulties around the offset
0x60 used for TCO register bank, tree-wide.
Change-Id: I827558a0e0ef1c4d1f866756df51cd1b2abfc7a0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
mayan is the reference board for the morgana SoC. It needs to be
updated to match the actual board design as well. amd/mayan is started
as a copy of amd/birman.
Change-Id: Id6801e6c6e706ae3878ce9e2c3d6452964235148
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70010
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SATA is not supported on google/rex hence disable it.
BUG=none
TEST=Build and boot to google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I35a742ab9782feed86c3af514505d870d181b34b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Fix compilation issue due to enum macro redefinition by safeguarding
definitions with DISPLAY_FSP_VERSION_INFO_2 in SoC Kconfig.
Back-ported from commit f7e8adac7b ("edk2-stable202005: Update
MdePkg/Include/IndustryStandard/SmBios.h") to fix compilation issue due
to enum macro redefinition.
BUG=b:260183604
TEST=Verify MTL Rex0 build with the patch
and verify the version output prints no junk data.
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.corp-partner.google.com>
Change-Id: Ibc65d05a8b4bd232b91184ff8cd52a20cd3538ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Enable NVMe GPIOs based on fw_config and add NVMe to devicetree.
Note, eMMC and NVMe are not probed in devicetree. On first boot in
factory, the device needs to boot with unprovisioned fw_config, so all
storage devices should be enabled when unprovisioned. Currently,
devicetree disables all probed devices when unprovisioned. If we want
eMMC and NVMe to be probed, support needs to be added for enabling
probed devices when unprovisioned.
BUG=b:259211172
TEST=Verified by ODM. On craask, LTE and WCAM still work. On craaskneto,
eMMC and NVMe SKUs can both boot.
Change-Id: I76a056cddff2246cfb5bb26ddbdfc333b49d9aaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69958
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch drops the local implementation
`log_me_ro_write_protection_info` and adopts the API from IA common
code (cse_lite.c).
BUG=none
TEST=Able to compile the cse_lite.c file for google/kano without
any error.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I087ffb8ac94f14a6bd7f2bf6bb907c4047dc9899
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69969
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch creates an API for CSE-Lite specific SKU to retrieve the
Write Protect (WP) information (`cse_log_ro_write_protection_info`)
like WP range and limit, if the region is write-protected or not etc.
BUG=none
TEST=Able to compile the cse_lite.c file for google/kano without
any error.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8f4b7880534ded5401b6f8d601ded88019c636c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69968
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
As for mainboard mc_ehl1, a hard real-time dependency is also required
for this mainboard. The L1 prefetcher on Elkhart Lake is too aggressive
which in the end leads to an increased number of cache misses. Disabling
the L1 prefetcher boosts up the performance (in some cases by more than
10 %) in this specific use case.
Change-Id: I07b27dd672533e693a6c2987d16f54333850760e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Move the chip configuration to the cpu cluster device.
It looks like none of the devicetree were featuring a lapic 0xacac,
nor was tcc_offset ever set, so this remains a NOP.
Change-Id: I296631511b0e31b0ed43ca8193552483bdab4482
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59315
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
These boards do no fill MADT with useful information.
Change-Id: Ie61e4e4b03c9b7fcd70aba7a2bd71eadd6f4dab1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69777
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The cpu cluster is always present and it's the proper device to contain
the settings that need to be applied to all cpus. This makes it possible
to remove the fake lapic from devicetrees.
Change-Id: Ic449b2df8036e8c02b5559cca6b2e7479a70a786
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59314
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Set of boards and platforms did not have LINT1 configured
as NMI source.
Change-Id: I65044125562bda363b3a0d92da6137c77a28b587
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69528
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the broadcast ID to deliver LINT1 as NMI to all CPUs,
instead of listing individual LAPIC IDs.
Change-Id: Iaf714d8c2aabd16c59c3bcebc4a207406fc85ca9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
`is_untrusted` is eventually ended up by adding DMA property _DSD which is similar to what `add_acpi_dma_property` does for WWAN drivers, hence it
makes sense to have a unified name across different device drivers.
BUG=b:259716145
TEST=Verified that the _DSD object is still present in the SSDT.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I4e0829a76a193b0a1e1e0f2b7ce2119bb00dd696
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69937
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We don't currently use the artifacts from the Clang or CrOS GCC
builds, so don't bother saving them.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I69fe803e4b4213a199d0b76089da443aa769aa92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
A previous CL ("Add missing ACPI device path names",
commit d22500f0c61f8c8e10d8f4a24e3e2bf031163c07) caused some errors
from the Kernel on Brya devices (see Tim's comment on patchset 8):
> ACPI Error: AE_NOT_FOUND, While resolving a named reference
> package element - \_SB_.PCI0.FSPI
FSPI is defined in src/soc/intel/alderlake/chipset.cb:
device pci 1f.5 alias fast_spi on end
This CL adds the corresponding FSPI device to the DSDT to prevent
the error mentioned above.
TEST=Built and tested on brya by verifying the error is gone.
BUG=b:231582182
Change-Id: I11e89ad2a5d47f6b579f755b0a41399ee3cb856c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69920
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On a 32-bit host, uintptr_t is defined as 'unsigned int' instead of
'unsigend long int' like on a 64-bit host. When cbfstool is built on a
32-bit host, the printk format specifier '%lx' expects a 'long int'
while new_addr is of type 'uintptr_t', aka 'unsigned int'.
This in the end leads to a build error.
To fix this and make it build on both, 32- and 64-bit hosts, use PRIxPTR
as the format specifier. This macro will be resolved at compile time in
the right way on both, 32- and 64-bit hosts.
Test=Build cbfstool on 32- and 64-bit hosts.
Change-Id: Ia917d2ed31778f3a29c0a6c7368f74c15319b099
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69682
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The current IPU ES entry value is always set to true for RPL and
kernel picks the ES version of the main IPU FW even for the production
bootloader but loading is not successful due to the authentication
failure.
On Raptor Lake silicon, the production binaries are backward
compatible with ES parts.
This change removes the IPU ES support ACPI entry since the
kernel needs to load the production IPU main firmware on both the
ES/QS parts.
BUG=b:258125833
TEST=Verify the Camera functionality by enabling the IPU secure mode
on RPL variants with both ES/QS silicon.
Signed-off-by: Jim Lai <jim.lai@intel.com>
Change-Id: I9fd8ea0dd6ffdb16961bb017ba4388bf99e4d5bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Perform a codec reset before configuring to avoid potential issues like
oryp5 had before 86f410479c ("mb/system76/oryp5: Reset HDA before
configuring").
Inspecting proprietary firmware for multiple boards shows that this is
always done as well.
Change-Id: I64c1fd23f708f77a81fad0bc889f42d4df3f6e61
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66918
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
A function declaration without a prototype is deprecated in all versions
of C.
Change-Id: Ie22231908233f2fba25d78f6c5f53940011e8158
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69748
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For the most part, this doesn't change any post codes, simply making the
existing post-codes into macros.
picasso/romstage.c did get a couple of post codes removed to match the
other files.
The POST_ROMSTAGE and POST_BOOTBLOCK codes are intended to become global
at some point, while the POST_AGESA and POST_PSP codes would stay AMD
specific.
Change-Id: I007a09b6a3ed3280bac674cd74e298ec5c408ab7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Taken from Linux which also updated these files.
Clang only works with this syntax, so this fixes builds for arm.
TESTED on qemu vexpress-a9 and verstage on google/vilboz with
BUILD_TIMELESS=1, binaries remain the same.
Change-Id: Ia320dc2c460c99d934b8f17dee7748a9def4e750
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63058
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch decouples HECI disabling interface a.k.a SMM or PCR or PMC
IPC etc. from DISABLE_HECI1_AT_PRE_BOOT kconfig as Intel ME BWG
recommends to disable the CSE PCI device while CSE is in
software temporary disable state.
BUG=b:260183610
TEST=Able to build google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3c9c5a73028cde90af3553093a13d0c05b831bae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69930
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reduce the difference with linux v6.0-rc3.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ica20264d744ea8f77b56c63d29e1fafc2e68a869
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Also, use {read,write}_pmbase16() in lpc.c file instead of inw/out.
Change-Id: Id281a3478051c4876ccbe26452d8744769c86654
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69878
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set downshift counter to 2 for all Marvell PHYs on this mainboard before
the PHY downshifts to the next highest speed.
Change-Id: I32b5f25a3e1e0f962dff3110143e236992ef8e7d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69887
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch provides the functionality to enable downshift on Marvell
PHY. By setting a downshift counter, the PHY is correspondingly often
attempted to establish Gigabit link before the PHY downshifts to the
next highest speed. The range is limited to 8 trials. To activate
downshift, a software reset must follow to take effect.
Change-Id: I4224eab6c1fc13824d53556c80435bc130a13bdb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69853
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On this mainboard Marvell PHY INTn is routed to LED[2] pin.
Change-Id: I28a78afdcf0599bb998f906ce8056a0586e24f33
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69434
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
INTn on Marvell PHY can be routed to LED[2] pin. This setting must be
made via LED Timer Control Register on page 3.
Change-Id: Ida1efbb604c382676b9d13ac8bf14de768f93637
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69433
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This mainboard has three Marvel PHYs connected to the internal SOC GbE
controllers. The default LED status after HW reset of this PHYs shows a
different mode than what is needed. LED[2] is not connected on this
mainboard.
This patch sets the following LED status:
LED[0] - 7 = On - 1000 Mbps Link, Off - Else
LED[1] - 1 = On - Link, Blink - Activity, Off - No Link
LED[2] - not connected
TEST=Try different register values to verify LED feature.
Change-Id: I51d817bc720bf787279777f503efdc17dbb1274d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69387
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch provides helper functions to read or write a register via the
MDIO bus. They can be used from drivers to easily access registers on
the MDIO bus.
Change-Id: I293d93435d27269a071b4b9b94a1b55307c575a7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69611
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Kyösti Mälkki