The first pass of the GPIO configuration patch didn't
enable the SMI# generation for GPIs marked as SMI
routed. Now when a pad is configured as SMI routed
the bit for the SMI enablement is set accordingly.
BUG=chrome-os-partner:43778
BRANCH=None
TEST=Built and booted glados. Confirmed SMI_EN being set
for SMI routed GPIOs.
Original-Change-Id: I796b68accb7a49b03ef18539861e72fa9d169c26
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/292010
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I3be770234d3f605ae630ecd5cd4cfe4867243999
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11207
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The gpio pad configuration currently defaults to ACPI
owned GPIs. A '0' was used which wasn't so clear. Add
a comment and explicitly set it to ACPI. Also,
PAD_CFG_GPI_ACPI_SMI wasn't using the _PAD_CFG_ATTRS
macro which causes compliation errors if attempted
to be instantiated. No piece of code tried to use
it so the error was overlooked.
Lastly, allow for soc/gpio.h to be included during
ASL compilation. That allows for gpio_defs.h to be
included and those macros utilized without needing
to know the file name and where it lives; just use
the generic gpio.h.
BUG=chrome-os-partner:43778
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I9dbadb0b494683ab38babfc1ac5e13093ee37730
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291935
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id4fa8b65ec1e1537dbf09824c2155119a768807e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11206
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of using a hard-coded value leverage the existing
definitions to perform GPE0 block length calculations. There
are 4 pairs of 32-bit status/enable registers.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I14d08298b5750c91ce0ac3fa33569813396f7089
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291932
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I127f026f15180fa79625d4cad96d5e35f85e5090
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11205
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The ec_smi_gpio and alt_gp_smi_en devicetree options are
goign to be removed. The plan for skylake is to set the
settings by the mainboard through either gpio pad
configuration or through helper functions.
Moreover, these values only allow *1* SMI GPIO configuration
in that the following has to be true:
alt_gp_smi_en = 1 << (ec_smi_gpio % 24)
If not, then another gpio(s) from the same group has the
SMI_EN bit set for it.
Lastly, remove all the subsequent dependencies as they are
no longer used: enable_alt_smi() and gpio_enable_group().
BUG=chrome-os-partner:43778
BRANCH=None
TEST=None
Original-Change-Id: I749a499c810d83de522a2ccce1dd9efb0ad2e20a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291931
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I2e1cd6879b76923157268a1449c617ef2aada9c4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11204
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On skylake the GPE0 routing can be dynamically changed to
a particular GPIO group. Provide the ability for the mainboard
to set the route accordingly. If any of the values in the
devicetree are the same the current setting in the PMC register
is used. The GPIO communities need to have matching configuration
for the plumbing to work properly.
BUG=chrome-os-partner:43778
BRANCH=None
TEST=Built and booted glados w/ and w/o devicetree changes. Fields
are set accordingly.
Original-Change-Id: I263d648c8ea8a70b21570f01b333d05a5fa2a4e3
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291930
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I966d38bc197dbb52a2ba50927c06e243e169afbe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11203
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Display the total accumulated time using each timestamp
entry. It purposefully doesn't take into account the first
timestamp because that can be a platform dependent value
that may not contribute to the concept of "total".
BUG=None
BRANCH=None
TEST=Ran cbmem on glados where TSC doesn't reset to 0 on
reboots. Clear total value given at end.
Original-Change-Id: Idddb8b88d3aaad11d72c58b18e8fd9fd1447a30e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291480
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Trybot-Ready: David James <davidjames@chromium.org>
Change-Id: I79a0954d3b738323aaebb3e05171bcf639e5d977
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11202
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
IedSize is not used in replace of IED_REGION_SIZE.
Drop it from chip.h.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=Built, booted, suspended, resumed on glados.
Original-Change-Id: I38f6518701306c0ffc6d2b2e3fe01624a5eadf54
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290933
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Trybot-Ready: David James <davidjames@chromium.org>
Change-Id: I9dd9e689d4d4f7b4770369dcd042d3325990ae32
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11201
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The skylake code is using IED_REGION_SIZE instead of
devicetree.cb. Drop the the option from the device trees.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=None
Original-Change-Id: Ib252266060fbc6ed0eeaac19a6b79c173c6c9a13
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290932
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Trybot-Ready: David James <davidjames@chromium.org>
Change-Id: Ib08628e163ac27d4c49eddcbec6cab3252abd4aa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11200
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The stage_cache_external_region() calculation is actually
dependennt on the properties of the chipset. The reason
is that certain regions within the SMRAM are used for
chipset-specific features. Therefore, provide an API
for abstracting the querying of subregions within
the SMRAM.
The 3 subregions introduced are:
SMM_SUBREGION_HANDLER - SMM handler area
SMM_SUBREGION_CACHE - SMM cache region
SMM_SUBREGION_CHIPSET - Chipset specific area.
The subregions can be queried using the newly
added smm_subregion() function.
Now stage_cache_external_region() uses smm_subregion()
to query the external stage cache in SMRAM, and this
patch also eliminates 2 separate implementations of
stage_cache_external_region() between romstage and
ramstage.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=Built, booted, suspended, resumed on glados.
Original-Change-Id: Id669326ba9647117193aa604038b38b364ff0f82
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290833
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Idb1a75d93c9b87053a7dedb82e85afc7df6334e0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11197
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The smm_subregion() support allows the SMM relocation
to not use duplicated math by calling out the specific
regions it wants. IED base is now correct and not
pointing outside from SMRAM.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=Built, booted, suspended, resumed on glados.
Original-Change-Id: Ief8940c2ab6320449500ced2121d0cd7ed73af4b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290930
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Trybot-Ready: David James <davidjames@chromium.org>
Change-Id: I00c3284cfacb2a73942640ccfa7912b7d65efb9d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11198
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The fsp_ramstage.c code was not taking advantage of the stage
cache which does all the accounting and calculation work for
the caller. Remove the open coded logic and use the provided
infrastructure. Using said infrastructure means there's no
need for the FSP_CACHE_SIZE Kconfig variable. Therefore, remove
it.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=Built, booted, suspended, and resumed on glados.
Original-Change-Id: I4363823c825b4a700205769f109ff9cf0d78b897
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290831
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ifd3cc4a538daac687949c5f4cab2c687368d6787
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11196
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The TSEG is defined to be from TSEG->BGSM in the
host bridge registers. Use those registers at
runtime to calculate the correct TSEG size.
Lastly, use a few helper macros to make constants
more readable.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built, booted, suspended, resumed on glados.
Original-Change-Id: I6db424a0057ecfc040a3cd5d99476c2fb8f5d29b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290832
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I6890fa450ce8dc10080321aa1a7580e0adc48ad5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11195
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The xhci_rh_port_status_changed() function tries to always clear all
port status bits, even though most of them don't interest us. This is
generally a smart thing to do since not clearing a status bit may cause
the controller to not generate any more Port Status Change Events.
However, the bitmask we currently use doesn't cover bit 23 (Port Config
Error Change) and instead covers bit 16 (Port Link State Write Strobe)
which is not really related to this and not a W1C bit. Probably a typo,
so let's fix that.
BRANCH=None
BUG=None
TEST=Plugged/unplugged a bunch of USB devices on an XHCI Falco.
Original-Change-Id: Ia83f5b72cce094859c0f0e730752d7b5cfa6e1c6
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291842
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I11f5fe38cb70055daf6e866a8ee84ca80488e3bf
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11194
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Using struct prog and struct region_device allows for the
caller to be none-the-wiser about where FSP gets placed. It
also allows for the source location to be abstracted away
such that it doesn't require a large mapping up front to
do the relocation. Lastly, it allows for simplifying the
intel/commmon FSP support in that it can pass around a
struct prog.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=Built, booted, suspended, and resumed on glados.
Original-Change-Id: I034b04ab2b7e9e01f5ee14fcc190f04b90517d30
Original-Signed-off-by: Aaron Durbin <adurbin@chroumium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290830
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ibe1f206a9541902103551afaf212418fcc90e73c
Signed-off-by: Aaron Durbin <adurbin@chroumium.org>
Reviewed-on: http://review.coreboot.org/11193
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The stage_cache_add() function should not be manipulating
the struct prog argument in anyway. Therefore, mark it as
const.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=Built, booted, suspended, and resumed on glados.
Original-Change-Id: I4509e478d3c98247b9d776f6534b949d9ba6282c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290721
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ibadc00a9e1cbbf12119def92d77a79077625fb85
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11192
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch enables GPIO controller for skylake. It adds
community base addresses and offset for Community0, Community1,
and Community3. Community2 is not exposed in BIOS or enabled
in the kernel driver.
Also, clean up the carry over GWAK implementation from BDW.
BRANCH=None
BUG=chrome-os-partner:42393
TEST=cat /sys/kernel/debug/gpio should list of GPIOs
TEST=export a GPIO pin using /sys/class/gpio/export
Original-Change-Id: I891c40589d3dbd796cf593626472c7b5674a1ae0
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291230
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7481ce682ccae872fddf81b3188c3415d5d3f7d9
Signed-off-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Reviewed-on: http://review.coreboot.org/11191
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
acpi_is_wakeup_s3() was introduced in upstream coreboot
while the FSP support code was written. Move to using
that instead of using the romstage_handoff structure
directly.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=Built, booted, suspended, and resumed on glados.
Original-Change-Id: I71601a4be3c981672e25e189c98abb6a676462bf
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290720
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I2ae4d9906e0891080481fb58b941921922a989d3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11190
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This forward-ports the change from CL:277155 since the Kconfig file
was renamed from Config.in.
BUG=chrome-os-partner:41416
BRANCH=none
TEST=built and booted on Mickey, keyboard works at dev screen
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Ibffa5188df51ecd7b8bdd631d4b767ec64130819
Original-Reviewed-on: https://chromium-review.googlesource.com/291138
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: Iebb1da6ec8c7886a6eb9ebcc67b59d617496c555
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11188
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@google.com>
The 1.1 revision of the XHCI specification added an extra 5 bits to the
Max Scratchpad Bufs field of HCSPARAMS2 that newer controllers make use
of. Not honoring these bits means we're not allocating as many
scratchpad buffers as the controller expects, which means it will
interpret some uninitialized values from the end of the pointer array as
scratchpad buffer pointers, which obviously doesn't end well. Let's fix
that.
BRANCH=none
BUG=chrome-os-partner:42279
TEST=Makes a USB-related memory corruption issue disappear.
Original-Change-Id: I7c907492339262bda31cdd2b5c0b588de7df8544
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291681
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Iba1007bfebffe1f564f78bb875fff9ba0fe11a38
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11189
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If short packet detected, stop this transfer and return the actual
transferred size
BUG=chrome-os-partner:42817
TEST=Netboot could run well
BRANCH=None
Original-Change-Id: Icb4317f48aa04ac15bb1886b81d2e3c472d123d0
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/288215
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-(cherry picked from commit d372343b4e3d664ce2d76dbf55a5061b5d496bba)
Original-Reviewed-on: https://chromium-review.googlesource.com/291064
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Change-Id: I43d9edffe2074c037f2df203621863e54d2597fa
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/11187
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Explicitly clear all write-1-to-clear fields in the
appropriate power state registers. That way stale
state isn't left around from boot to boot. The
MMIO PMC registers are always added such that the
resource can be accessed from reg_script. It doesn't
hurt to add the resource, and it's actually more
informative by attaching the actual resources
owned by the device.
BUG=chrome-os-partner:43625
BRANCH=None
TEST=Built and boot glados. Did global reset. Noticed bits
set. Did normal reset and saw those same bits no longer set.
Original-Change-Id: Idd412bd6bf2c6c57b46c74f9411bdf8413ddd83e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290339
Change-Id: Ibef1aefedf6ba006f17f9f94998a10b39cc6bfec
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11186
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Leaving a sentinel 0xC0DEBABE and fixing it up is
is the old way of setting the correct base address
for GNVS. One just needs to reference NVSA which is
already filled in by the skylake ACPI code.
BUG=chrome-os-partner:43611
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados. /sys/firmware/log shows
up as well as ramoops using the correct address.
Original-Change-Id: I1d4979b1bb65faa76316a4ec4c551a7b9b9eed32
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290338
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I25efea73a383215f9365ce91230f79516b0201a6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11185
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Provide #defines for the bit fields in the SMI status register.
This allows for one to set the callback accordingly without
hard coding the index.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I3e61d431717c725748409ef5b543ad2eb82955c4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289802
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I1a91f2c8b903de4297aaa66f5c6ff15f1b9c54f6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11184
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
DISB (bit 23) in GEN_PMCON_A represents to MRC that DRAM
training is complete. However, as a 8-bit write was
being performed the bit was never being set.
BUG=chrome-os-partner:43516
BRANCH=None
TEST=Built and booted to kernel. Rebooted. Noted full memory
training was not being peformed.
Original-Change-Id: If2a9cc2f80bc38ea86fb0d7ff855ef95540b561b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290337
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ic7973e0ec279304797e0b3d83d7378f620f2b548
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11183
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Open coding bitfields is really annoying as no one knows
what they are unless you have a doc in front of you.
Fill in the bitfields for the GEN_PMCON_A and GEN_PMCON_B
registers.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Id48de68eaa3896c17d5da2ffb0bcf17062f73e5e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290336
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I968be9736419e26a771e0a0c3c964d540fbb1efe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11182
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to run with the debug FSP the SMBus device needs
to be enabled. Additionally, the TCO block lives within
the SMBus device so if TCO is to be employed then the
SMBus device needs to be enabled as a prerequisite.
BUG=chrome-os-partner:42407
BRANCH=None
TEST=Buit and booted into kernel.
Original-Change-Id: I269650fa5222b4741ef495188dff1f4b8176fe89
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290364
Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Change-Id: Ia1f72ea7bd70728de83cdff07df9810a326266c2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11181
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
FSP was setting up the TCO registers to be mapped at 0x400.
However, the SMBus initialization in romstage was mapping
its I/O BAR to 0x400 as well. The result seemed to cause the
TCO register to be hidden. However, the board was rebooting in
depthcharge when the SMBus device was enabled from a TCO timeout.
As the TCO timer was halted before the double resource assignment
it's not clear how the TCO was getting re-enabled. In either case,
the current behavior is wrong.
BUG=chrome-os-partner:42407
BRANCH=None
TEST=Built and booted glados w/ SMBus enabled.
Original-Change-Id: I43c0d67a76abac51ccfd5105245792981fbcd04c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290363
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I3839290768c27626c3fd2d67d5de94c291c1386e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11180
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch re-adds a few fixes that originally went into the
chromeos-2013.04 tree. I kinda seem to have slipped them into the
backport of Nico's original XHCI patch (crosreview.com/168097) instead
of making a new change, which was not very clever and caused them to be
forgotten in the later upstreaming wave.
Changing internal XHCI error numbers is just a cosmetic change to make
them uniquely identifyable in debug output. Bumping the timeout to 3
seconds is an actually important fix since we have seen mass storage
devices needing that much in the past.
BRANCH=None
BUG=None
TEST=Diffed payloads/libpayload/drivers/usb between chromeos-2013.04 and
chromeos-2015.07, confirmed that no serious differences remain.
Original-Change-Id: I03d865dbe536072d23374a49a0136e9f28568f8e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290423
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I5d773d3a23683fb2164916cc046f4a711b8d259e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11178
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of relying on FSP to do gpio configuration in one
place use the native support in coreboot. This also removes
the open coded configuration of the memory configuration
ids.
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I4655221d821d91a2270d774305a02d6bd5c3959c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289800
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I2e66242d050c3825f6bc65d3d2c7f51d2cdfbd73
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11175
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It's important to be able to configure the gpio pads at
various stages instead of a single place using FSP. Without
this support there is a lot of duplicated open-coded pad
configuration taking place both within the SoC code and
mainboards.
Current limitation is that all GPIOs are in ACPI mode. i.e.
The HostSW ownership register sets the pad configuration to
only update GPI_GPE_STS, GPI_NMI_STS and/or GPI_SMI_STS. The
GPI_STS update is masked within the GPIO community registers.
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Id8a00e99c7a4c3912de2feaff9cea12b402f2c68
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289789
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I4c86b47ac5ab004f2bfd7cb07dd23c458f7dbb7c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11174
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In the wake of the recent Intel "Memoy Sinkhole" exploit a code review
of the AMD SMM code was undertaken. While native Family 10h support
does not appear to be affected by the same SMM flaw, it also does not
require SMM to function. Therefore, the SMM memory range initialization
should only be executed if SMM will be used on the target platform.
Change-Id: I6531908a7724933e4ba5a2bbefeb89356197e8fd
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11211
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Before the controller's destroy_device() could interrogate
the usbdev_t object usb_detach_device() was freeing and
NULLing out the pointer. That results in all callers who
needed that object to start accessing random bits of memory.
This eventually led into free()ing memory it shouldn't which
corrupted the allocator's state. Eventually, all forward
progress was lost by way of a single ended linked list
turning into a circular list.
The culprit seems to be a bad merge in commit e00ba21.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=Can boot into OS now w/o "hanging" on glados.
Original-Change-Id: I86dcaa1dbaf112ac6782e90dad40f0932f273a1f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290048
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: I9135eb0f798bf7dbeccc7a033c3f8471720a0de5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11173
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Many Kconfig options changed in coreboot.org since
skylake was first started. Fix Kconfig option name
changes, and also provide a common option, UART_DEBUG
that can be selected to select all the necessary
options.
Note: It's still a requirement to manually unset the
8250IO option because that's unconditionally set.
BUG=chrome-os-partner:43419
BUG=chrome-os-partner:43463
BRANCH=None
TEST=Built glados. Booted into kernel. Kernel reboots somewhere.
Original-Change-Id: I9e6549ea0f1d6b9ffe64a73856ec87b5bc7b7091
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289951
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I0e6b492d7279cc35d4fb3ac17fd727177adce39d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11172
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Enable the Deep Sx pins to allow wake from the EC via LAN_WAKE#.
Report the EC wake pin LAN_WAKE as GPE[112].
BUG=chrome-os-partner:43079
BRANCH=none
TEST=suspend/resume on glados with wake from keyboard
Original-Change-Id: I99664e1e406d15e7460046a6168cbd3a377aaca4
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288921
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I19db144ed5db183f47af03340886a5e770af8bc8
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11171
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add support for enabling various pins in Deep Sx by setting
a register in the mainboard devicetree.
BUG=chrome-os-partner:43079
BRANCH=none
TEST=build and boot on glados
Original-Change-Id: I1b4fb51f72b88bdc49096268bdd781750dcd089d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288920
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7555a92fecc6e78b579ec0bc18da202cb0c824e2
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11170
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There was no implementation for uart_fill_lb() in the 8250mem
driver. Rectify this so when 8250MEM and CONSOLE_SERIAL are
employed then the build doesn't fail.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=Built with glados using 8250MEM
Original-Change-Id: I35d6b15e47989c1854ddcee9c6d46711edffaf3e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289899
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Change-Id: I972b069a4def666f509268816de91ed6c0f655d9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11169
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
CBFS_SIZE is living as a mainboard attribute. Because
of the Kconfig include ordering the SoC *cannot* set
the default. Remove from the soc Kconfig and add a
default Kconfig for SOC_INTEL_SKYLAKE.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=built glados
Original-Change-Id: I8808177b573ce8e2158c9e598dbfea9ff84b97c7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289833
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Change-Id: Icf52d7861eee016a35be899e5486deb0924a0f3c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11168
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In the review process for http://review.coreboot.org/#/c/11052/
the code was mangled and the result was unbuildable code. Fix this.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=Can actually build bootblock.
Original-Change-Id: I5bc63b8c435dbf025f1c334e9a1bc4a9da2b4902
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289788
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Change-Id: Id0f67d8b74fa9146bf01990f599d538222f7e0e2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11167
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The asl_template previously unconditionally included
dsdt.aml. However, COMPILE_IN_DSDT=y results in the
dsdt.aml being linked directly into ramstage. Thus
the information is duplicated.
The inclusion of this file unconditionally throws
some errors as certain assets need to be included
in CBFS. However, as there isn't fine-grained
ordering control in how files are added fixed
resource requirements for other assets collide
result in failure to build.
To remedy both things, provide a 2nd argument to
asl_template which defaults to 'y' for CBFS
addition. In the COMPILE_IN_DSDT=y case pass
'n' so that dsdt.aml is no longer added.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=For glados:
Built with COMPILE_IN_DSDT=y. dsdt.aml not included.
Built with COMPILE_IN_DSDT=n. dsdt.aml was included.
Original-Change-Id: I4767e5be2915c1732251fe415017f30314c5efc9
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289840
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id1828627ba0a034eb05b2fe23be76e19f3040444
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11166
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
After the preparation in earlier commits, it is now possible to handle the
more general case of position independent files using the special code path
for fixed location files.
This leads to a single place where non-empty cbfs file headers are actually
written into the image, allowing us to move it up the chain more easily.
Change-Id: I8c1fca5e4e81c20971b2960c87690e982aa3e274
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11222
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove dependency of common reset code on FSP
BRANCH=none
BUG=None
TEST=Build and run on Braswell and Skylake
Original-Change-Id: I00052f29326f691b6d56d2349f99815cafff5848
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286932
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7f59f0aad7dfae92df28cf20fff2d5a684795d22
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11165
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
... and the assert is gone.
The actual action of adding a just-right file can be moved after the tests
since it's exactly the condition those tests don't continue or break on.
Change-Id: I6d0e829e0158198301136ada9a0de2f168ceee3f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11221
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The sysinfo object within the k8 ram init is used
to communicate progess/status from all the nodes in the
system. However, the code was assuming where the sysinfo
object lived in cache-as-ram. The layout of cache-as-ram
is dynamic so one needs to do the lookup of the correct
address at runtime. The way the amd code is compiled
by #include'ing .c files makes the solution a little
more complex in that some cache-as-ram support code
needed to be refactored.
Change-Id: I6500fa7b005dc082c4c0b3382ee2c3a138d9ac31
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10961
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The assert() makes sure the if() holds true. But that assert won't survive for
long.
Change-Id: Iab7d2bc7bfebb3f3b3ce70dc5bd041902e14bd7a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11220
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We will want to create headers that live outside the final image at some point
(eg. to build the file before we even know where to place it).
Change-Id: Ie4c0323df8d5be955aec3621b75309e8f11fae49
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11219
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Pass the file type into it instead of creating an entry, then modifying the
header field again after the fact.
Change-Id: I655583218f5085035b0f80efff7f91a66b5b296e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11218
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Aaron Durbin