Commit Graph

12886 Commits

Author SHA1 Message Date
Vadim Bendebury 5c9f534269 urara: Fix CBFS header definitions
Urara CBFS header configuration is broken. CBFS header needs to be
right above the bootblock, and the CBFS data - 0x100 bytes above, to
allow room for proper CBFS wrapper structures.

Ideally only the header offset should be specified (and even that
could be derived from the bootblock size). But this is a more generic
problem to be addressed with different architectures' image layout
requirements in mind.

BRANCH=none
BUG=chrome-os-partner:31438
TEST=coreboot image passes the integrity check now (it was failing
     before because CBGS header was overlaying the bootblock)

  $ FEATURES=noclean emerge-urara coreboot
  $ /build/urara/tmp/portage/sys-boot/coreboot-9999/work/coreboot-9999/build/util/bimgtool/bimgtool \
                 /build/urara/firmware/coreboot.rom.serial
  $ cbfstool /build/urara/firmware/coreboot.rom.serial print
  coreboot.rom.serial: 1024 kB, bootblocksize 9956, romsize 1048576, offset 0x4100
  alignment: 64 bytes, architecture: mips

  Name                           Offset     Type         Size
  fallback/romstage              0x4100     stage        7100
  fallback/ramstage              0x5d00     stage        18995
  config                         0xa780     raw          2452
  (empty)                        0xb140     null         1003096

Change-Id: Id615bdcc6261dea9f36a409bd90f1e4764353bb9
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 8a0115963aa7460e4c7255ab8508d7d52d67fb67
Original-Change-Id: Id200ab5421661ef39b7c7713e931c39153fdc8be
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227523
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/9187
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-02 21:52:35 +02:00
Ionela Voinescu 33c10f8c32 urara: Configure UART line control to 8N1
8bit, 1 stop bit, no parity

BUG=chrome-os-partner:31438
TEST=built urara bootblock and ran it on the Pistachio FPGA, observed
      expected console output.
BRANCH=none

Change-Id: Iface623f0b267f851e6d162d0321d56e3713a785
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4122ae983dba907c10d0d0980863ae7bf94eda5e
Original-Change-Id: I14fe343c98b11774b93b2724b6bffa3b45ea17b4
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226551
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9185
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-02 21:46:13 +02:00
Vadim Bendebury b92e54333f mips: do not place branch instructions in branch delay slot
A branch instruction in a branch delay slot confuses the execution
pipeline and causes an exception.

bootblock.S was written 'by hand', has a branch instruction in branch
delay slot and includes '.set noreorder' directive, which causes it to
crash when trying to branch to main().

Adding a nop instruction fixes the problem. Also adding a nop after
the last branch in the file just in case main() returns and the object
linked next starts with a branch.

BUG=chrome-os-partner:31438
TEST=Running on the simulator can reach main() now

Change-Id: I0882b2eb5ce426f5a311018ffbb6f37a2ca64d98
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221421
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9183
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
2015-04-02 21:43:16 +02:00
jinkun.hong 3e9ea16c54 coreboot: rk3288: add new ddr config and support ddr3 freq up to 800mhz
Add ddr3-samsung-2GB config and modify 533mhz linit.
Support ddr3 freq up to 800mhz.
Enable ODT at LPDDR3.

BUG=None
TEST=Boot Veyron Pinky

Original-Change-Id: Ic02a381985796a00644c5c681b96f10ad1558936
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/220113
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>

Change-Id: I867753bc5d1eb301eb4975f5a945bfdba9b8f37d
(cherry picked from commit e6689cbb0ec50317672c8ebe4e23555ca2f01005)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9239
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 21:16:55 +02:00
huang lin bfdd732b80 rockchip: support pwm regulator
BUG=None
TEST=Boot Veyron Pinky and test the VDD_LOG

Original-Change-Id: Ie2eef918e04ba0e13879e915b0b0bef44aef550e
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219753
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>

Change-Id: I444b47564d90b3480b351fdd8460e5b94e71927c
(cherry picked from commit 4491d9c4037161fd8c4cc40856167bf73182fda6)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9240
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
2015-04-02 21:16:45 +02:00
huang lin bbcffd9e25 rockchip: support i2c clock setting
BUG=None
TEST=Boot Veyron Pinky and measure i2c clock frequency

Original-Change-Id: I04d9fa75a05280885f083a828f78cf55811ca97d
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219660
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>

Change-Id: Ie7ac3f2d0d76a4d3347bd469bf7af3295cc454fd
(cherry picked from commit 4b9b3c2f8b7c6cd189cb8f239508431ee08ebc52)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9241
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
2015-04-02 21:16:28 +02:00
David Hendricks 1fd5a9b36d pinky: Force delay for EC SPI transfers
This gives the EC some time to wake-up between asserting /CS and
starting a transfer.

BUG=chrome-os-partner:32223
BRANCH=none
TEST=verified ~100us delay using logic analyzer on Pinky

Original-Change-Id: I9874e65abd405874c43c594d8caeeff9e1300455
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220243
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Original-Commit-Queue: Alexandru Stan <amstan@chromium.org>
Original-Tested-by: Alexandru Stan <amstan@chromium.org>

Change-Id: I103542517d3ebd7da4f0394b3ae4f68f58403b1e
(cherry picked from commit bdb67fe489b7cbea7a26492fa0536ca452434052)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9238
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 21:16:17 +02:00
Julius Werner 8f3883d5f4 veyron_pinky: Add rev2 support, clean up mainboard.c
This patch adds support for the board changes in rev2 (board_id = 0001).
It also moves the existing mainboard.c code around a bit to group it by
component.

BUG=chrome-os-partner:32139
TEST=Booted on rev1. Confirmed SD card still works. Confirmed power
button was still as broken as before.

Original-Change-Id: Ifc4876687db64ca50e41d009d911446129d57b1b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220251

(cherry picked from commit 9428e0d1b784b27790b3b3dbbb18a769e51c6fd3)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>

Change-Id: I8d3479aa314f8c6f1591c1b69b0a3827234fc730
Reviewed-on: http://review.coreboot.org/9237
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 20:46:26 +02:00
Daisuke Nojiri 5c2988c461 veyron: select rw romstage using vboot2
this change makes veyron pinky to select a rw romstage using vboot2.

BUG=None
TEST=Booted Veyron Pinky. Verified firmware selection in the log.
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>

CQ-DEPEND=CL:219100
Original-Change-Id: Ia1cfdacde9f8b17b00e7772a02e0d266afedb82f
Original-Reviewed-on: https://chromium-review.googlesource.com/219103
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>

(cherry picked from commit 69c1e4b9ee200645d38d28165389aa85ef9b36cd)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>

Change-Id: I7b4a2db8bcb95038dfb55bb7ceee66ac4a6c9475
Reviewed-on: http://review.coreboot.org/9234
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 20:46:17 +02:00
Dave Frodin 8d9a1bd5a8 southbridge/amd/pi: Add initialization of 8254 and 8259
This moves the initialization of the 8254 and 8259 out
of the (unmerged) lamar mainboard romstage.c file and into
the southbridge code as it is done in the other AMD
southbridges.

Change-Id: I73b375754ee4a9bf15981f2cd31056d7e04db23e
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/9182
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
2015-04-02 19:19:20 +02:00
Duncan Laurie d9f9507065 broadwell: Disable ADSP power gating feature by default
Disable ADSP D3 and SRAM power gating features by default, and make
the devicetree.cb flags into enable flags instead of disable.

BUG=chrome-os-partner:31588
BRANCH=samus,auron
TEST=build and boot on samus

Change-Id: Ibda298b995b07a2826a406e74e0d244b1fd97746
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b81ef37c036d61dc56e650796227dcc84a7ccc89
Original-Change-Id: Ib881290acc07819b55d776d4696bf0062df4d50e
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220863
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9218
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:28:15 +02:00
David Hendricks 767d245ebf chromeec: Add wakeup delay after SPI /CS assertion
Some ECs may require a few microseconds to ramp up their clock after
being awaken by /CS assertion. This adds a Kconfig variable that can
be overridden at the mainboard-level which will force a delay between
asserting /CS and beginning a transfer.

BUG=chrome-os-partner:32223
BRANCH=none
TEST=verified ~100us delay using logic analyzer

Change-Id: I6d9b8beaa808252f008efb10e7448afdf96d2004
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: ec6b10e4e3f0362dea0dc8046cfd4e4615a42585
Original-Change-Id: Ibba356e4af18f80a7da73c96dadfda0f25251381
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220242
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Reviewed-on: http://review.coreboot.org/9217
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
2015-04-02 17:28:14 +02:00
Duncan Laurie 8429786315 samus: Fix codec interrupt and add GPIO defines
The codec interrupt needs to come from codec GPIO1, so use the
HOTWORD_DET GPIO as the codec IRQ and the DSP_INT as the wake.The

This means codec interrupt is GPIO46 which is PIRQO and should be
interrupt 30.

Also add GPIO defines for the GPIOs attached to the codec itself.
These are defined by index, and I used the same "jack detect" and
"mic present" indices that were used in baytrail.

The codec interrupt to the host is added at index 2 and the
hostword detect interrupt to the host is added at index 3.

These can be changed as we work through the implementation in the
kernel driver.

BUG=chrome-os-partner:29649
BRANCH=samus
TEST=build and boot on samus

Change-Id: Id9cb083ddf9df161be314da4148740ed9f4d0fe6
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3958efb28813c664a8a4219f78bdd0fcfe75c706
Original-Change-Id: I1c1ac1b6095fab7e3f4412555db4f9a9138e528b
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220326
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9216
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:28:13 +02:00
Duncan Laurie b12e9becfe chromeec: Fix logging of EC wake events
The EC behavior for reading events from the ACPI interface was broken
with this commit:

d899fda lpc: ACPI query-next-event drops masked events
https://chromium-review.googlesource.com/194935

This is causing no EC wake events to be logged.  To make sure they are
logged once again set the wake mask before querying for events.

Also remove the check for port80 event logging since this is no longer
used as we now store the port80 code in CMOS and this is unnecessary
commands to do for the resume path.

BUG=chrome-os-partner:32462
BRANCH=samus,auron
TEST=build and boot on samus, check for EC wake events for keyboard
and lid in the event log.

Change-Id: Ib46fc00006ff0e5777941fc3ab1d81607359c4cb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b4dccc03bdded8411cc1429521579ea006ec58a7
Original-Change-Id: Icdd0c1a37a94e0cbd9fd256172324bf989e6d0dc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220373
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9215
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:28:12 +02:00
Duncan Laurie 3b6a88ed7e samus: Clean up touch wake sources
Move _PRW to the ACPI devices for the touchpad and touchscreen.
Add a _DSW method, but disable it by default for now until a
spurious wake issue can be resolved.

BUG=chrome-os-partner:32232
BRANCH=samus
TEST=build and boot on samus, ensure trackpad does not
spuriously wake the system.

Change-Id: I3160248ef6dfeccdec765553643d9b8de2bb2ed1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 85d14842aefdb29c750009c0092f055587172dac
Original-Change-Id: Ic4763f2cb5f3a59d04b236cee94906025661c615
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220325
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9214
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:28:11 +02:00
Duncan Laurie cdcc9a4635 broadwell: Add event log entry for GPIO27
Add event log entry if GPIO27 is used to wake the system.
This GPIO is treated separately from other GPE and it is
one of the only events that can wake from Deep Sx.

BUG=chrome-os-partner:31549
BRANCH=samus
TEST=samus: suspend/resume and wake from keypress, check for
GPIO27 event in event log.

Change-Id: If699640701b0afcd0843c2a99546ee6bb9d09361
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0f1cccfd00552dafbaa91acc362b5e35474c3a95
Original-Change-Id: I38a44a62f68288a4ae3f97fe078ca222fd01390a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220323
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9213
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:55 +02:00
Julius Werner 635ee51b0d arm: Prevent compilation of old, experimental SMP support
The ARM SMP feature was added a long time ago and has never really been
used by anyone since. We are still always compiling cpu_info() even
though we don't use it, and it makes some dangerous assumptions about
stack alignment that are not guaranteed anywhere.

I'm planning to change the way the stack boundaries are defined. Rather
than trying to work that into this unsafe, unused and hard to test
feature, I think we should just seal it off with police tape and make
sure that if anyone ever tries to use it again (which currently seems
unlikely), they get forced to do their due diligence on making sure it
works as intended.

BUG=None
TEST=Compiled Veyron_Pinky.

Change-Id: Id25545cab88f29200c7672ef02c7804f0ac26399
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 5b517fc46b030a6e50ef2f5e4d4a449b98ce16c6
Original-Change-Id: I8a60bd30e8b27a22bb3da68ca84daea99424dee9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219680
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9222
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:54 +02:00
Ryan Lin af9cbaa182 Broadwell: Reg_Script: add END tag to array "smbus_init_script"
Need END tag, "REG_SCRIPT_END", to indicate the end of smbus_init_script.

BUG=chromium:416651
TEST=test on Auron.

Change-Id: Ieeaf6c705aa673acc9bb2635e103c4148bc8742f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 172c5fc259a2f6d09daccb1fe53fe0aa7c5601e1
Original-Change-Id: I1f5624f4c6ce7f0e8ceb8971aaa595d99e9ff82e
Original-Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/220934
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9221
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:51 +02:00
Duncan Laurie 1247b8734d samus: Fix and clean up GPIOs and EC info/events
- Define specific GPIOs in gpio.h instaed of smihandler.c
- Add battery status event to SCI list
- Remove old proto board version defines and SPD index usage
- Do not disable cmd_pwr training now that it works on EVT board

BUG=chrome-os-partner:32196,chrome-os-partner:29117
BRANCH=samus
TEST=build and boot on samus

Change-Id: I50f1599aa4266ed61749cc7f4229a9384b498df2
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0e3ebcb8659c92874d3ca89fa3a6795c9b6eebfa
Original-Change-Id: I53cf8d80ed7f675c10fa04e8fe8b879a4af9b21f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220321
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9220
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:50 +02:00
Duncan Laurie d840118ef5 chromeec: Add battery status event and re-enable _BIX
Add a new host event to send a notify(0x80) to the battery
when the EC indicates that battery status has changed.

The kernel has fixed the bug with _BIX method so it can
be enabled now.

BUG=chrome-os-partner:32196
BRANCH=samus
TEST=build and boot on samus

Change-Id: I1b8068df7abf1c8ebdc3a89602896b863accb7f3
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a779fc7f32729adb60d8bc220325444ebc20e0d2
Original-Change-Id: I0ebb17e5441e875875d98168ce3c31486d57330e
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220320
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9212
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:49 +02:00
Kenji Chen e383feb7c8 Broadwell: Synchronize for power management with FRC
Set Root Port 0 PCI CFG Offset 0xE2[5:4] before ASPM configuration.

BUG=chrome-os-partner:31424
TEST=Build an image, and check the procedure and recommended setting
is applied correctly.
Signed-off-by: Kenji Chen <kenji.chen@intel.com>

Change-Id: I94820787d4ed4a6bf8db8898b7de14467c9d6630
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 24bdea6cd67d5657b94058233cd26130f68c44e4
Original-Change-Id: I98713f615885ac02867942ece2be1cea8ce04ab2
Original-Reviewed-on: https://chromium-review.googlesource.com/219994
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9211
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:48 +02:00
Kenji Chen c373f503db Broadwell: Synchronize RO, Link Arbiter, and OBFF with FRC
OBFF: Disable it by clearing bit fields in that W/O register.
RO: Enable Relaxed Ordering from each enabled Root Port.
Linker Arbiter: Set it to recommended setting.

BUG=None
TEST=Build an image and check the setting are applied correctly on
Samus.
Signed-off-by: Kenji Chen <kenji.chen@intel.com>

Change-Id: I7a72217729d6f6ff5320738245c380c887c5912f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 465b0a37c381930a4f0d74cd4fd69503a082911b
Original-Change-Id: I284e9eba1c2fceb690d3ef48b45a6f36d07ff84c
Original-Reviewed-on: https://chromium-review.googlesource.com/219993
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9210
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:47 +02:00
Kenji Chen 8ef55ee996 Broadwell: Revise programming flow for write-once registers
Extended PCIe Capability and Advanced Error Report locates at
offset 0x100 is W/O, and the subsequent write following the 1st
write to the register takes no effect.

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d2862b6c1ccc77845cb3e08688a72c0655ea79c9
Original-BUG=chrome-os-partner:31424.
Original-TEST=Build a image and check the programming value is correct on
Original-Samus.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I0bed30f516ee0307b4a86cad2f669a18ff4994db
Original-Reviewed-on: https://chromium-review.googlesource.com/219985
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>

Change-Id: I3711aa0f1f918baebb4fd77a3615bdf5956ba844
Reviewed-on: http://review.coreboot.org/9209
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:46 +02:00
Kenji Chen 87d4a201ab broadwell: Configure IOSF Port and Grant Count
Synchronize the code with FRC.

Change-Id: I50d2a02971681bbfcf4135482b5b95a41ddaac36
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c891a3e0474235bd97268f52d09ddff574caeb95
Original-BUG=None
Original-TEST=Build coreboot image and run on Samus to confirm the setting
is properly applied.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: If387a23749b6e9470c7e67286234e18ab3e423b3
Original-Reviewed-on: https://chromium-review.googlesource.com/219523
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9208
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:44 +02:00
Vadim Bendebury 274ef4186f vpd: retrieve mac addresses and pass them to bootloader
Chrome OS devices firmware usually includes an area called VPD (Vital
Product Data). VPD is a blob of a certain structure, in particular
containing freely defined variable size fields. A field is a tuple of
the field name and field contents.

MAC addresses of the interfaces are stored in VPD as well. Field names
are in the form of 'ethernet_macN', where N is the zero based
interface number.

This patch retrieves the MAC address(es) from the VPD and populates
them in the coreboot table so that they become available to the
bootloader.

BUG=chrome-os-partner:32152, chromium:417117
TEST=with this and other patches in place the storm device tree shows
     up with MAC addresses properly initialized.

Change-Id: I955207b3a644cde100cc4b48e51a2ab9a3cb1ba0
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 1972b9e97b57cc8503c5e4dc496706970ed2ffbe
Original-Change-Id: I12c0d15ca84f60e4824e1056c9be2e81a7ad8e73
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219443
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9207
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:37 +02:00
Kenji Chen 074a028ef7 Samus: Synchronization with FRC to enable PCIe Relaxed Order.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 8455d95442ee9a39ecb182abf319469dde06d324
Original-BUG=None
Original-TEST=Modify settings, build and update the image to Samus and
Original-check the settings are applied to Registers.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I3d407b8f1cb4a6ea3d6879a8581156a73f98220f
Original-Reviewed-on: https://chromium-review.googlesource.com/219073
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>

Change-Id: Ide6e747f1eccb74be2e21e76f592a919399bee31
Reviewed-on: http://review.coreboot.org/9206
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:36 +02:00
Duncan Laurie f6d7baa8fa samus: Ensure PD controller is in RO mode for recovery
In order to not break FAFT, and to have a quicker recovery
mode boot, reboot the PD controller into RO image in romstage.

This is done before the EC since rebooting the EC into RO will
also reboot the host.

BUG=chrome-os-partner:30079
BRANCH=none
TEST=boot samus EVT into recovery with 'dut-control power_state:rec'
and ensure that the PD controller is rebooted to RO in romstage.

Change-Id: Ieb51717c17fdcbda7aa63b6a9404959e8736c08f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 19237f6a338fa1c593867d8dfda1edcd376878af
Original-Change-Id: I633f51afc382a7faab825c15618c0bc7566c4395
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218904
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9205
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:35 +02:00
Duncan Laurie 60e6bf80db chromeec: Add support for v3 commands on LPC
In order to talk to the PD controller with a passthru command
coreboot needs to be able to use v3 commands.

The command version is automatically detected based on the
advertized flags from the EC.

BUG=chrome-os-partner:30079
BRANCH=none
TEST=boot on samus EVT

Change-Id: I032eb185d80d5b68c82609910045e21d4521afcc
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4f664b22645f0def87a73e9255297b3edccf436e
Original-Change-Id: I94ace7741c9cd592921625fb793787247a5ca2aa
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218902
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9203
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:34 +02:00
Duncan Laurie fc0f5175fb chromeec: Add commands to check PD image type
Coreboot needs to be able to reboot the PD controller into RO
image in recovery mode early in the boot process in order to
avoid a lengthy recovery mode boot if it is only done at vboot
software sync time.

In order to do this a new device index field is added to the
command structure which must be initaalized to zero for all EC
transactions.

This early init and image check code is only used in romstage so
include it in the __PRE_RAM__ block.

BUG=chrome-os-partner:30079
BRANCH=none
TEST=build and boot on samus EVT in recovery mode and see that
the PD is rebooted to RO mode early in the boot.

Change-Id: Iee60aae4d49b83b4a377b71e41e8109858a90223
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b36cf37d9b5a7053ecbd15c748eac84836d413e1
Original-Change-Id: Iebc48709b527d3571618da775c849e1c3fcd6384
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218903
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9204
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:31 +02:00
Duncan Laurie 8caa80b84f chromeec: Update ec_commands.h from EC repository
This latest version includes PD passthru support.

BUG=chrome-os-partner:30079
BRANCH=None
TEST=build and boot on samus

Change-Id: Ie718b73a6b125a863ae28e63769dd54edc267f0b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: fbca0743a4b45828a466d05afc3a2e94d2e3da2e
Original-Change-Id: I79d160219564155008f6231fec35808d1fbd6f04
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218901
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9202
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:29 +02:00
Kein Yuan c9bf446ee9 baytrail: Change USB3 PLL VCO and iCLK PLL current on BYT-M/D CPU
Intel will be making slight changes to USB3 PLL VCO and iCLK PLL current
on C0 stepping of BYT-M/D C0 stepping in order to meet the high demands
for these processors.

Pre-conversion materials are compatible with USB PLL VCO current increase.
Post-conversion materials ARE REQUIRED to be run with increased USB3 PLL
VCO current.

BUG=chrome-os-partner:31199
TEST=Boot Rambi, then read USHPHY_CDN_PLL_CONTROL and verify register
has new value.

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bc01a3df80f5bd7fd86047c8bbf1584d19363e3b
Original-Change-Id: Ie9c3d0afd54ea7ced2c76ebb948de95be0828fa0
Original-Signed-off-by: Kein Yuan <kein.yuan@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211337
Original-Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-(cherry picked from commit df20eca47ca0ff33baf5d554ef11dd2b35706a5d)
Original-Reviewed-on: https://chromium-review.googlesource.com/205970
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217772
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>

Change-Id: I1c825992a2b4dfac86f77cde567d2471ca4c19e6
Reviewed-on: http://review.coreboot.org/9200
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:28 +02:00
Kane Chen 642e598102 broadwell: Update PCIe configuration to follow BWG
According to BIOS spec 8.14
B0:D28:F0[5:4] should be set to 11

BRANCH=none
BUG=chrome-os-partner:28234
TEST=build ok, boot to Auron and Samus
     make sure register is set and PCIE is working

Change-Id: I4a7e990993c230dfc1ba83ea75f56757c2c18e46
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 82826e3c44c26252697677ec08b95a8f174bc360
Original-Change-Id: I7c37245053ceae460dac0f18363f585244db72f8
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217414
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9197
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 17:27:26 +02:00
Vadim Bendebury 86b0c8b480 chromeos: Add WiFi calibration CBMEM entry pointer to coreboot table
This patch adds plumbing necessary to ensure that the CBMEM WiFi
calibration blobs entry, if present, is referenced if the coreboot
table.

BRANCH=storm
BUG=chrome-os-partner:32611
TEST=none - the entry is not yet in the CBMEM

Change-Id: I072f2368b628440b6fe84f310eebc1ab945f809e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d0330280369753a6520196425e6dfc7d7bd226a3
Original-Change-Id: I04d52934ad1c5466d0d124b32df5ab17c0f59686
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225270
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9232
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 13:32:04 +02:00
Duncan Laurie d775ddab99 broadwell: Clear pending GPE events before entering sleep state
In the case of an EC wake event that is pending but not cleared
it is possible for the EC wake pin (i.e. GPIO27) to be asserted
after the kernel triggers the sleep SMI but before the system
goes to sleep.

If this happens then the GPE will be reported as a wake source
when the system wakes up again.

BUG=chrome-os-partner:33218
BRANCH=samus,auron
TEST=build and boot on samus, use the keyboard to enter suspend
with suspend_stress_test and ensure that only the RTC is listed
as a wake source upon resume.

Change-Id: Id900132bb81e4cf50885a652ed00a142d951ea4d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 50396ab6a3a3efb3b3dea4f1c2a8f8804fed943e
Original-Change-Id: I319dc22e21126a3086415f8f8b2b35eaec66fd50
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225540
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9231
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 13:32:00 +02:00
Kenji Chen e237f5ac95 Baytrail: Change PCIe root disable algorithm
Disable Root Port0 only when there is no PCIe device
present on any root port.

BUG=None
TEST=Boot Rambi with PCIe installed/non-installed on RP0 to
confirm the RP0 is correctly enabled/disabled. However, I still
need someone to help check if RP0(no device) is still enabled
if there is device on other RPs since since I have no devices
having slots from RP1/2/3.

Change-Id: Iae552975250ed6f309c423b847621b8994172891
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c5cef0b7c2c146f0d46ed49b75fd2ec8369210ce
Original-Change-Id: I7147569e78b2d1ecea070bc933773cdcae59f9e7
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217791
Original-Tested-by: Ted Kuo <tedkuo@ami.com.tw>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9219
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 13:30:43 +02:00
Ted Kuo 6ecaf65bff Baytrail: add _PRT to each PCIe root port device
Report PCI routing table of all PCIe root ports for legacy interrupt.
Some PCIe devices using legacy interrupt can't work if PCI routing table
isn't defined. It's necessary and defined in BWG Chapter 28.1.3.

BUG=chrome-os-partner:31943
TEST=compiled and tested
BRANCH=NONE
Signed-off-by: Ted Kuo <tedkuo@ami.com.tw>

Change-Id: I2c684edfd1fc624bed471783584250cd9f5e66f5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b9040d564a32607327057a84b9aab14e66cd5b45
Original-Change-Id: Ia15ced6c5fdcc6712e5f2831e42c6dee320f166b
Original-Reviewed-on: https://chromium-review.googlesource.com/218422
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Ted Kuo <tedkuo@ami.com.tw>
Original-Commit-Queue: Ted Kuo <tedkuo@ami.com.tw>
Original-Tested-by: Ted Kuo <tedkuo@ami.com.tw>
Reviewed-on: http://review.coreboot.org/9201
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 13:29:42 +02:00
Kenji Chen ffc2a3b59b Samus: fix unused GPIO pin
Mark GPIO42 as unused according to Samus schematics

BUG=None
TEST=Make the chnage; Pass the build process; Need someone having
the board perform the verification.

Change-Id: Ib53a3ae062d414a2c98ec0756e759760d179e3fd
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4e0f8f3276c575ff60fbda709de5d3cfe31a5900
Original-Change-Id: Ifd6a0d2de8af0fe3af4a14f44ce572b41b77509c
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217344
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9199
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 13:29:40 +02:00
Vadim Bendebury 70e189e9e8 ipq806x: provide soc specific CBMEM_CONSOLE_PRERAM_BASE
For now storm bootblock runs with DRAM fully initialized, this patch
puts the early console between bootblock and rom phase.

BUG=chrome-os-partner:31734
TEST=verified that preram_cbmem_console is set:
  $ grep preram_cbmem_console cbfs/fallback/bootblock.map
  40618000 A preram_cbmem_console

Change-Id: I2d63f5fde0d3794062068289c648d8bcda11a9a3
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 6bdadad3787d6a4a2d4828b0f300455fedca2b8d
Original-Change-Id: I132a0cbcc82e713c36fc5031706d9afbf3e9b879
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217291
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9198
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 13:29:39 +02:00
Kane Chen 51bdc47816 smbios: add a family id in smbios type1 family
mosys will use this field to identify system

BRANCH=none
BUG=chromium:359155
TEST=build ok, use dmidecode to check whether data is
     written correctly

Change-Id: I461215c012b6ad712b3f813a3928e90a23bf54f1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 7adbdab761cd7b4bda0a43e7b1c4070de26f150a
Original-Change-Id: Icfbd4c61fc49a9cb3d3ecd2b622339957963150c
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217400
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9230
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 13:26:05 +02:00
Daisuke Nojiri 2b59a838b4 vboot: add vbnv flash driver
this adds a driver for vboot to read and write nvdata in spi flash.
it's assumed that flash contents are erased to 1-bits and write
operations can only change 1-bits to 0-bits.

when all nvram space is used, the driver will erase the whole block
and start the next write from the beginning.

BUG=chrome-os-partner:32774
BRANCH=ToT
TEST=Built for cosmos.

Change-Id: I40858f847151aa0770e1101e905476d270550f60
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 09713828b7b0cabd13a08de3f34e32bc4dbef4a4
Original-Change-Id: Ia9049f342b21fa4c289cb7b9254ab89ec1ef1699
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226525
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9229
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-04-02 13:24:29 +02:00
Duncan Laurie 2af67c9878 broadwell: Add reporting of broadwell MCH revision
Since the E0 and F0 stepping parts have the same CPUID it is
necessary to use the MCH PCI device revision to determine what
the actual stepping is.

Add this decode table so the early output gives proper identification
of the installed CPU type.

BUG=chrome-os-partner:32359
BRANCH=samus,auron
TEST=build and boot on samus with E0 and F0 parts

Change-Id: Idce1e289cd958c77febc87395f27570247512a87
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a5346141e45b105a35a7641f60b29e02ab2bdfa3
Original-Change-Id: I1bc127badd75ecc34d3d2dbae5d272bd4d9f9082
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223158
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9228
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 13:24:28 +02:00
Duncan Laurie 4b2adb13f1 broadwell: Change CPUID 306D4 to report "E0 or F0"
The F0 stepping has the same CPUID as E0 stepping so report
it as either stepping to avoid confusion.

BUG=chrome-os-partner:32359
BRANCH=samus,auron
TEST=build and boot on samus

Change-Id: I99a83855b4393d736724836b709702417483b5d2
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 55ed3bc880c31c0ca5c8a21c335722af05eb57f7
Original-Change-Id: Ia4955f346ceb9be92e06ecea5b7a8fe2db84cabc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223097
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9226
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 13:24:25 +02:00
Duncan Laurie 32dfd06255 broadwell: me: Fix typo and add missing phase state
Fix the typo of sate to state and add uKernel phase to just
output the current state byte.

BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus

Change-Id: I5f341ee6c58487aeb927cab0641742cb4071a6b7
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: de6149508c50d0770fedfbe352e9149abea87b4c
Original-Change-Id: I520a4cc75faffa5feeb6113ffd7b07a48c4e6f28
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/222677
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9225
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 13:24:23 +02:00
David Hendricks afd6298c95 pinky: Enable EC_SOFTWARE_SYNC
CQ-DEPEND=CL:218766
BUG=none
BRANCH=none
TEST=built and booted on Pinky

Change-Id: Ib3eed77553433e9f8c70af8b148729e628c95747
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 56b3e8c02a4e45653a5369ce47dcbce0c18f7194
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Icbee95350949bd9bfa4490a8a4b6bbf09beb4170
Original-Reviewed-on: https://chromium-review.googlesource.com/221019
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9224
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-02 13:24:21 +02:00
Timothy Pearson c56d5c5aac mainboard/asus/kfsn4-dre: Set maximum installable memory to 64GB
Change-Id: I480d6bfe29c77119892fcb1fbb9779fd7e3529c3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9139
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-04-02 05:55:57 +02:00
Timothy Pearson 6e523a682f northbridge/amd/amdfam10: Generate SMBIOS tables for RAM
TEST: Booted ASUS KFSN4-DRE and verified SMBIOS contents
via dmidecode utility.

Change-Id: Id656f2f6cf5a4ecafa03e150ad91f69107a4fe88
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9140
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2015-04-02 05:55:41 +02:00
Timothy Pearson a73dcbe736 mainboard/supermicro/h8qme_fam10: Fix indentations and spelling
Change-Id: I49c5d39a674351f7375fb762fc9ef4a3700d7c87
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9177
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-04-01 23:19:13 +02:00
Aaron Durbin 9eebbd4151 x86: set smbios rom size based on CONFIG_ROM_SIZE
Instead of relying on the CBFS header's romsize field use
the CONFIG_ROM_SIZE Kconfig variable. That value is what is
used to create the rom file as it is. Therefore, just remove
the dependency.

Change-Id: If855d7378df20080061e27e4988e96aee233d1e0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9130
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-01 22:54:28 +02:00
Timothy Pearson 22564088c7 mainboards/amdfam10: Copy DIMM information to cbmem after romstage
src/northbridge/amd/amdfam10: Add amdmct_cbmem_store_info()
function.

Change-Id: I07376e276e3e9e3247d2576a09e58780d32a3a76
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9138
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2015-04-01 22:53:55 +02:00
Aaron Durbin 3e91cffd89 mainboards: fix spd generation
echo is evaluated by a shell builtin producing non-binary
spd data of the form '-e -n \<byte>'. Correct this by
using printf builtin which does the equivalent and is
more cross platform friendly.

Boards changed:
gizmosphere/gizmo
gizmosphere/gizmo2
google/bolt
google/falco
google/link
google/peppy
google/rambi
google/samus
google/slippy
pcengines/apu1

Change-Id: Iefdaf59903b9682cc88c94fd991883b560616492
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9196
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-01 22:51:41 +02:00