Any whitespace or dashes are replaced with underscores.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4583 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
is the correct choice. Avoids type problems in kconfig
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4580 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Only build-tested so far, not tested on hardware.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4572 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Whitespace fixes, remove trailing whitespace, use TABs for identation
(except in Kconfig "help" lines, which start with one TAB and two spaces
as per Linux kernel style)
- Kconfig: Standardize on 'bool' (not 'boolean').
- s/lar/cbfs/ in one Kconfig help string.
- Reword various Kconfig menu entries for a more usable and consistent menu.
- Fix incorrect comment of NO_RUN in devices/Kconfig.
- superio/serverengines/Kconfig: Incorrect config name.
- superio/Makefile.inc: s/serverengine/serverengines/.
- superio/intel/Kconfig: s/SUPERIO_FINTEK_I3100/SUPERIO_INTEL_I3100/.
- mainboard/via/vt8454c/Kconfig: Fix copy-paste error in help string.
- mainboard/via/epia-n/Kconfig: Fix "bool" menu text.
- console/Kconfig: Don't mention defaults in the menu string, kconfig
already displays them anyway.
- Kill "Drivers" menu for now, it only confuses users as long as it's emtpy.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4567 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
important corrections to the Kconfig and Makefile.inc that were there. I
would like to go ahead and get this in, because I don't want anyone to
continue using what is in the upstream tree as it now exists.
I also tested old-style build with this and it did not break anything.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4559 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
CBFS uses sprintf, which requires vtxprintf, which requires (in the
current design) a nested function. That works on x86, but on PPC this
requires a trampoline. In the ROM stage, this is not available, so
remove the single use of sprintf and replace it with a direct string
handler - it's only used to fill in fixed-length hex values.
20090819-3-more-noreturns-in-romcc:
Mark two more functions in romcc as noreturn. Helps clang's scan-build a
bit
20090819-4-cbfsify-ppc:
Make PPC use CBFS. Support big endian ELF in cbfs-mkstage. Untested and
not complete yet.
20090819-5-fix-ppc-build:
The CBFS build system requires ROM_IMAGE_SIZE to have a somewhat
plausible value.
With fixes to tohex* functions as discussed on the list, and correct
function names.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4558 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This eliminates 56kb of padding in the bootblock.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4554 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on Via EPIA-NL8000EG with FILO payload booting FC9 (2.6.25
kernel) from SATA HDD.
ACPI is working for PCI interrupt routing, some memory stuff and
Soft-Off.
USB/SATA Working
VGA Console Working
X Working via Onboard AGP
Removed dsdt.c, fixed some whitespace.
Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4549 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Remove the normal/* files from the image. they're just
copies of fallback/* anyway.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4541 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Keeping identical files around will only bite us eventually, when they
get out of sync. See coreboot-v2 history for examples.
Trivial and build tested.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4539 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
when Patrick's tree and mine got out of sync.
Link stage still fails.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4536 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Works on Kontron, qemu, and serengeti.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
tested on abuild only.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
and we will fix issues as they appear.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
certain configuration options are disabled. The strings were just
at the wrong place.
Two boards fix up some variables for romstream. This isn't necessary (or
possible) when CBFS is active, as there is no romstream. It would be
nicer to have them depend on CONFIG_ROM_PAYLOAD, but there isn't any
invariant that forces that to be inactive if CBFS is active, and this
patch is supposed to be small, esp. as the stream loaders are on the way
out.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4494 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add initialisation for the VIA Chrome 9 IGP on the k8m890 through native code
and through the general vga infrastructure i committed a month or two ago.
Add videoram_size option for k8m890 and the Asus M2V-MX SE.
Now the Asus M2V-MX SE will magically come up with a working standard VGA
80x25 textmode.
Many thanks to the people who worked hard on the Asus M2V-MX SE, and all
of its components; this vga bringup was a breeze thanks to your hard work
for this excellently supported board. And separate thanks to Rudolf Marek
for spurring me on and for providing a register dump.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4465 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
linux out of the box. There were two problems. First was that the
mmconfig ACPI structure was empty because of cut and paste (PCI ID of
K8M890 is different).
Second problem is now nicely solvable by add_region. Linux expects that
the mmconfig region is found as reserved memory. Otherwise it does not
trust it.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Luc Verhaegen <libv@skynet.be>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4464 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* acpi_add_table requires a pointer to the RSDP, not the RSDT anymore, in order
to properly support XSDT generation.
* fix compilation the DSDT on gigabyte/m57sli
* drop a remaining, forgotten HPET_NAME for "HPET"
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4461 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Move interrupt routing to mainboard specific code.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4458 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
soon as there's an ACPI 2.0 or later table)
* add XSDT support
* add more table types
This patch will break at least the kontron (and possibly some new boards I
missed)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4453 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add the respective Super I/O config in Config.lb (Winbond W83697HG),
enable COM1 on the board, fix irq_table.c, as well as the PCI
devices listed in Config.lb (based on lspci output).
This has been tested by Jakob Bornecrantz <wallbraker@gmail.com>
on hardware, i.e. there is serial output. It does not yet boot
to a Linux console successfully, more fixing will be needed.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4426 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware, works fine.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4423 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Change the parallel port from polling to interrupt-driven.
This was tested by Andreas Mundt with a parallel port printer.
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Andreas B. Mundt <andi.mundt@web.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4405 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
i810 chipset. Not all hardware has been tested, but my test PC boots Linux
(via FILO) without any problems.
Also: Add support for the SMSC LPC47U33X to the generic 'smscsuperio' driver.
Signed-off-by: Michael Gold <mgold@ncf.ca>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware with the patch from r4398 and works fine as soon
as Linux boots (no VGA in FILO for some reason, will investigate).
In order to make the 'i810.vga' VGA blob from the vendor BIOS work
you have to make the check for PCI device ID mismatches non-fatal
(for now) in the src/devices/pci_rom.c file like this:
Index: src/devices/pci_rom.c
===================================================================
--- src/devices/pci_rom.c (Revision 4393)
+++ src/devices/pci_rom.c (Arbeitskopie)
@@ -87,7 +87,7 @@
if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) {
printk_err("Device or Vendor ID mismatch Vendor %04x, Device %04x\n",
rom_data->vendor, rom_data->device);
- return NULL;
+ // return NULL;
}
printk_spew("PCI ROM Image, Class Code %04x%02x, Code Type %02x\n",
The reason is that the VGA blob thinks the proper VGA device ID is 0x7123
whereas it really is 0x7121 on hardware. There are multiple ways to work
around this (there have been many discussions in the past), we'll see which
method will be used in future...
Note: This has been tested against r4393 only for now to make sure there
are no problems because of the recent resource allocator changes, see
http://www.coreboot.org/pipermail/coreboot/2009-July/050486.html.
Tests with trunk will follow.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Turn on Parallel Port and Floppy in Config.lb
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Andreas B. Mundt <andi.mundt@web.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4396 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
targets/supermicro/h8dmr/Config.lb and Config-abuild.lb.
Importantly, this also sets
default CONFIG_AP_CODE_IN_CAR=0
in
src/mainboard/supermicro/h8dmr/Options.lb
which is required to make this box boot since the changes that went in in
r4315.
At Myles' suggestion, this patch also sets
default CONFIG_USE_FAILOVER_IMAGE=0
default CONFIG_USE_FALLBACK_IMAGE=0
default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE
in src/mainboard/supermicro/h8dmr/Options.lb to simplify
targets/supermicro/h8dmr/Config.lb a bit further.
Build tested with abuild, boot tested on physical hardware.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4393 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
didn't build before, and it still doesn't)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4387 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Attached is the third revision of the CN400/EPIA-N(L) patch for CB V2.
Patch should work against r4381 (or later ?)
This version now boots all of the way through to attempting to launch a
payload (I'm trying FILO right now), where it falls over with exception
6 (invalid opcode)
The coreboot_table issue seems to have been automagically resolved by
the latest core files.
It may still be that the reason for the payload not starting is down to
some issue with the tables initialising, I'll look closer at that.
Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4386 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Kconfig)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It's basically done with the following script and some manual fixup:
VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware by Andrew Morgan <ziltro@ziltro.com>, boots
Linux fine. Detailed status at:
http://www.coreboot.org/Soyo_SY-6BA_Plus_III
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Andrew Morgan <ziltro@ziltro.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, enable HIGH_TABLES support for this board.
The HIGH_TABLES failed with:
No matching ram area found for range:
[0x00000000000f0000, 0x0000000000100000)
Ram areas
[0x0000000000000000, 0x0000000000001000) Reserved
[0x0000000000001000, 0x00000000000a0000) RAM
[0x0000000000100000, 0x000000000fff0000) RAM
[0x000000000fff0000, 0x0000000010000000) Reserved
SELFBOOT RETURNED!
Boot failed.
The fix was to change northbridge.c as follows:
- ram_resource(dev, idx++, 1024, tolmk - 1024);
+ ram_resource(dev, idx++, 768, tolmk - 768);
This is build-tested and tested on hardware by me. It boots fine,
for instace with SeaBIOS and the standard GRUB1 from my disk.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add initial ACPI support for M57SLI.
Activates/Enables:
* native Coreboot ACPI for M57SLI
* Soft-Power-Off
* PowerNow!
* High Precision Event Timer
* Windows booting with ACPI support
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4364 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
