Add platform cpu info for known microcode, print cpuid & processor
branding string. This will print as in the following example:
CPU: Intel(R) Xeon(R) Platinum 8468H
CPU: ID 806f6, Sapphire Rapids E3, ucode: 2b000130
CPU: AES supported, TXT supported, VT supported
Change-Id: I9c08fb924aad81608f554523432ab6a549b1b75f
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
While doing the initial port of this board, hda_verb.c was mainly put
together by guesswork and borrowing the pinouts from similar boards.
While it was mostly correct, not everything was tested properly.
This change takes the values of vendor BIOS version P1.80, obtained by
running `cat /sys/class/sound/hwC0D0/init_pin_configs` while booted
from the vendor firmware.
7.1 channel audio and front panel audio are now also tested.
Change-Id: I60b0f55c203f42b220f13cf943912f7428476792
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73935
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Most of the code is taken from 2570p, adjusted with autoport, SuperIO
from 8470p and inteltool, GPIO config from inteltool via autoport.
The laptop works well under coreboot with SeaBIOS 1.16.1 payload,
running Debian GNU/Linux with kernel 6.1.15.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I854104516d5b6fbd78ee2989197000a7dbb85136
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73856
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As a follow-up to commit 1a591d0c44 (mb/asrock/b75m-itx: Make NIC a
child device below PCIe port 4), this change corrects the subsystemid
being incorrectly applied to the Realtek NIC instead of the PCIe root
port.
Change-Id: Ib6fb8bf808132c008846d8ca9acde0eef277765c
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This board inherited cmos.default and cmos.layout from asrock/h77pro4-m,
which has two CPU fan headers and a CMOS option to select which one will
provide the tachometer source.
However, the code for this was never implemented. Moreover, this board
only has one CPU fan header, rendering the option useless. This change
removes the option from cmos.layout and cmos.default.
Change-Id: Ib4580e243781e2340af2cefb825f26ee896c2bd3
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73931
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
FSP may program a different ID under certain circumstances.
Read IOAPIC ID from hardware instead of using some define that
might not reflect how hardware is configured.
Change-Id: Ia91cb4aef9d15520b8b3402ec10e7b0a4355caeb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Of the 13 mainboards that implement mainboard_should_reset_usb() hook,
all but one do the same: Stop MRC from resetting USB when resuming
from S3 suspend.
This hook turns out is only here to facilitate a USB reset workaround
on samsung/stumpy for an old ChromeOS kernel which is no longer needed.
Drop the workaround, the hook, and headers no longer used.
roda/rv11/early_init.c is left with no useful code after this patch,
so drop it entirely from both bootblock and romstage.
Change-Id: Ib3a5a00c0a6b1528e39435784919223d16b3914e
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Having these two functions public allow "asynchronous"
HECI command implementation.
Typically, these function can be use to implement an asynchronous
End-Of-Post.
BUG=b:268546941
BRANCH=firmware-brya-14505.B
TEST=Successful compilation for brya0
Change-Id: I7d029bb9af4b53f219018e459d17df9c1bd33fc1
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
The internal GPP bridge to bus B is not used on MDN, so remove it.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4f95afd192c5b799b7a3e12650476b7933cdd118
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The default SPD size is set to 256 bytes, instead of 512 for
LPDDR4/DDR4 if not overridden by the mainboard Kconfig. This caused
the SMBus libraries to read only the lower half of the DIMM SPD on
protectli/vault_ehl. The lower half of the SPD passed to FSP causes
a bug in DIMM change detection, which relies on the CRC of the
manufacturer bytes in the upper half of the SPD (CRC of zero bytes
always gives zero so no change was assumed). Setting the DIMM SPD size
to 512 fixes it.
Setting the SPD size in SoC will also avoid such problems in the future
Elkhart Lake ports. Elkhart Lake supports only LPDDR4/DDR4 so providing
the correct default of 512 bytes is an obvious thing to do.
TEST=Boot Protectli VP2420 (vault_ehl) with different DIMMs and see
FSP is retraining the memory instead of doing the fastboot with old
DIMM data.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I998ed8781951034419cadc26c04ff1e0a124b267
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73933
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PCIE RP 9 on taeko is for eMMC.
Correct the comments to prevent confusion.
BUG=b:271003060
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ib49942b682d1817af9e8b4b61044aa170e18fea8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
This patch renames all references of `top_of_ram` (TOM) in IA common
`basecode` module (for example: functions, variables, Kconfig,
Makefile and comments) with `ramtop` aka top_of_ram to make it more
meaningful and to avoid conflicts with Intel SA chipset TOM registers.
BUG=Able to build and boot google/rex with the same ~49ms savings
in place.
Change-Id: Icfe6300a8e4c5761064537fb256cfecbe2afb2d8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73881
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It seems like the hotplug enable might be doing more than just enabling
devices to be hot-plugged, so re-enable the feature for the SD card.
Removing it from SD increased resume time and may have caused reboot
issues for SD after resume.
This is a partial revert of CB:73512
BUG=b:273620322
TEST=See resume time go down on Skyrim
BRANCH=Skyrim
Change-Id: I4814d4377d0ba8a1e9b308853b3e02a4a27bd8d5
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73868
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Enable Frostflow platform to send the fuse SPL (security patch level)
command to the PSP.
BUG=b:274028833
BRANCH=none
TEST=FW_NAME="frostflow" emerge-skyrim coreboot chromeos-bootimage
Then get "PSP: SPL Fusing Update Requested." in the firmware log.
Change-Id: I6437d5324877702f2f8b4c69d4c850543e1b74be
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73884
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
To be consistent with other occurrences in soc/intel/common, remove the
return statements of weak void funtions since they are not generally
useful.
Found by the linter.
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Change-Id: I3fb8217cfcae65b5dc317458b59aa431f1ccdaef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The return statement at the end of the method is never reached. Remove
it. Also while at it, assign the return value of variant_board_sku()
to ski_id while the variable declaration and make it const.
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Change-Id: If05df8934f68ffec9ad21c88394055f71d618133
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Macros should not use a trailing semicolons. Remove those from
'LONG_DOWNTO8' aswell as 'LONG_DOWNTO16' and add them at places where
the macros are used.
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Change-Id: I5ba01bc09f9a2d9ecd54014e27ec0a24c7297412
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This will be tracked directly in the bug, so a code comment is not
needed.
BUG=263161283
TEST=none
BRANCH=Skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4d5af35762354c8825d30f813098547a7e009e35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73828
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Pre-RAM TPM logs use a separate define for the max number of logs. This
one fits into the 2 KiB region assigned to TPM_LOG in the CAR linker
script.
Change-Id: Idda08a33c4a29fcb50085ca93487585dedf11012
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Assign true/false instead of 1/0 to the valid_freq_divisor bool variable
in get_pstate_core_freq.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I92d0eb029c55f80a2027ff6d404c63ed84282750
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
If the host supports CXL, get proximity domain info from FSP HOB. The
proximity domains may include both processor domains and CXL domains.
Add header definition for proximity domain.
Add CXL memory into memory map.
Change-Id: If3f856958a3e6ed3909240ee455bb639e487087f
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
DPR should not be configured for VTD devices of other stacks for
SPR-SP. Such processor(s) would be configured with
SOC_INTEL_MMAPVTD_ONLY_FOR_DPR.
Change-Id: Ib33b1b62f59a10d362c6585b1403490d4a1aedeb
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72616
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
... instead of ME base/limit if the processor is configured with
SOC_INTEL_HAS_NCMEM.
Change-Id: I95783cad1a2d5a3599d120ea0c98e2aa8703bdb4
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72615
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This soc utility function can set cmos flag to enforce
FSP MRC training.
Change-Id: I88004cbfdcbe8870726493576dfc31de4b6036a9
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
After calling FSP MemoryInit API, if there is an error, some FSPs
(such as SPR-SP FSP) is capable of generating FSP_ERROR_INFO_HOB.
Check existence of such a HOB and handle it accordingly.
Change-Id: Icb5c31daa223ba6b06ba1b2de4f8808e0b27899e
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Add a new Kconfig CONFIG_ENABLE_FSP_ERROR_INFO option to enable
retrieval of FSP_ERROR_INFO_HOB from HobList created by FSP.
Such a HOB could be generated by Intel SPR-SP FSP.
This HOB data is defined in Intel®Firmware Support Package
External Architecture Specification v2.1 Doc#611786-2.1.
Change-Id: I812d1c22c1bbe5146630948ca6ca12c46ffd5504
Signed-off-by: Ray Han Lim, Ng <ray.han.lim.ng@intel.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The Kconfig help section says FSP uses 192 KiB of stack (0x30000) and
coreboot's romstage requires ~1 KiB, but it is not satisfied currently.
Increase the BSP stack size by the missing 1KiB for romstage like
other SoCs do.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iddd4a4613bc174aec4331732371a27450225258c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73820
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
To be consistent with other occurrences, add a space around the bitwise
or operator.
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Change-Id: I674311ae330789b75fe7d189ad0fddeae45efe02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Add FW_CONFIG probe for absent ANPEC APW8738BQBI IC on magolor.
BUG=b:223687184
TEST=emerge-dedede coreboot chromeos-bootimage and pass suspend_test and
firmware_ConsecutiveBoot test
Change-Id: I47ad313c4a14edb687913698986df9ece6cd721d
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73833
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GSPI is not used, remove it.
BUG=b:271199379
TEST=abuild -a -x -c max -p none -t google/brya -b hades
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I55d3f5119bc502621bdeae63b3d1e4cf43582038
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Commit 6a6ac1e0b9 ("arch/x86/cpu: introduce and use
device_match_mask") added the device_match_mask element to the
cpu_device_id struct and uses it to be able to mask off for example the
stepping ID when checking for CPU table entry that matches the silicon
the code is running on. Commit 3ed903fda9 ("soc/intel/xeon_sp/spr: Add
Sapphire Rapids ramstage code") added a CPU table that was missing the
device_match_mask which results in this being 0, so the first entry of
the CPU table would match for any Intel CPU which isn't the intended
behavior. Also use CPU_TABLE_END instead of the final {0, 0, 0} array
element.
Likely all entries could be replaced by one entry that uses the
CPUID_ALL_STEPPINGS_MASK instead of the CPUID_EXACT_MATCH_MASK, but
that's out of scope for this fix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib0be2e9fe3c31487c83c9b1cf305a985416760b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
UBSAN complains about "shift out of bounds", likely because integer
literals are signed by default and the result of the operation will
shift into the sign bit, yielding a negative value. However, as the
negative value is then casted to an unsigned type, it works anyway.
To make UBSAN happy, make sure the two troublesome integer literals
are unsigned so that there's no sign bit to shift into.
Tested on out-of-tree Asrock Z97 Extreme6, UBSAN now dies elsewhere.
Link: https://ticket.coreboot.org/issues/449
Change-Id: Iaf8710a5ae4e05d9f41f40f9e3617e155027800c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72806
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Programming MTRR happens later in the
CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT codepath.
fast_spi_cache_bios_region() assumes an existing MTRR solution from
x86_setup_mtrrs_with_detect().
This fixes a problem introduced by 829e8e6 "soc/intel: Use common
codeflow for MP init".
Change-Id: I9b6130cf76317440ebe7a7a53e460e2b658d198e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73836
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Mendocino only has 4 PCIe lanes exposed, so there's no need for 6
PCIe functions to control them. These functions just show up as
leftover devicetree devices.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5b801d82f085d77706b8053a8fc9728101f155e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73853
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Resolve this message:
[INFO ] PCI: Static device PCI: 00:16.3 not found, disabling it.
The ME KT is very unlikely to exist on a consumer device as it is only
used in combination with Intel AMT. AMT comes only with the corporate
ME variant, whilst this mainboard is consumer grade.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I15dd586db9cb4b2dd615b7bf78665df86a32cb9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73829
Reviewed-by: Kevin Keijzer <kevin@quietlife.nl>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
We're not going to move the AMDFW binary around at this point, so get
rid of the TODO.
BUG=None
TEST=None
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If802c3ee19f4e6a3a74da49bbda55f6a89fa8060
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73827
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Because Mendocino doesn't support PCIe Gen4, PSPP on this platform does
not save any power, so leave it disabled.
BUG=273889287
TEST=None
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I1a1c6692cd0a44469a35582042b92eeec31073fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Since commit 2f6b7d557d ("amdfwtool: Move the filling of table headers
into functions"), the combo_psp_directory union element in the
embedded_firmware is unused and the new_psp_directory element is used in
all places, so replace the union of new_psp_directory and
combo_psp_directory with just the new_psp_directory struct element.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I35d339b3084ec8f93210095c233f5e68296d0013
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Replace the legacy ACPI Processor() object as it only
supports 8bit IDs and thus no more than 255 cores. Use the
new ACPI Device() object that supports more than 255 cores.
Test:
- Observed no ACPI errors on IBM/SBP1 and Linux 5.15 running
384 CPU cores in total.
- Verified on Intel ADL RVP with 20 cores that Linux 5.15 is
still working without errors.
Change-Id: I309c06b6824704c84fd16534655334a6f269904a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73578
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Intel Client PCIe* controller expects each device should drive the
SRCCLKREQ#. If the GPIO is set to native mode for a device, which does
not support SRCCLKREQ#, then during RTD3 exit link would not be
established. Because controller samples the SRCCLKREQ# before
detecting the device and break L1 as the system might enter L1SS as
controller detects SRCCLKREQ# as de-asserted.
As a workaround the Pins must not be configured in Native Mode (CLKREQ
native function). Therefore here they are not configured at all.
source: 689882 (intel document ID)
So apparently hardware doesn't sample SRCCLKREQ Pin if it's not
configured as such.
That workaround suggestion however also brought a patch to FSP, which
in turn causes the same bug (even if SRCLKREQ are not configured).
Usually in order to make use of root port power saving features (e.g.
clock gating), the Root port must either be disabled or a CLKREQ Pin
must be configured. The patch however removed that check before
enabling power management for the rootport.
Workaround (until FSP is fixed):
pretend to FSP that the rootports have a CLKREQ Pin attached, by
supplying them in the FSP UPDs. That will cause FSP to configure the
CLKREQ Pin and enable power management for said rootport, but it will
not crash on L1 entry/exit. That has been done on the Atlas board
(as workaround) for a short period of time (before applying FSP Fix)
like this:
// RP 5 (the rootport you want to fix)
- memupd->FspmConfig.PcieClkSrcUsage[2] = 4;
// e.g. choose a clkreq pin that is not routed out
- memupd->FspmConfig.PcieClkSrcClkReq[2] = 0;
Furthermore disable CpuPcieRpClockReqMsgEnable FSP-M options to prevent
the same issue, but for CPU root ports. If not done the following will
happen in coreboot:
[DEBUG] PCI: 00:06.2 scanning...
[SPEW ] do_pci_scan_bridge for PCI: 00:06.2
[DEBUG] PCI: pci_scan_bus for bus 02
[DEBUG] PCI: 02:00.0 [1344/5410] enabled
[INFO ] PCIe: Common Clock Configuration already enabled
[INFO ] PCIE CLK PM is not supported by endpoint
[INFO ] ASPM: Enabled L1
[EMERG] CPU Index 9 - APIC 32 Unexpected Exception:18 @ 10:76aeb93f - Halting
[EMERG] Code: 0 eflags: 00000046 cr2: 00000000
[EMERG] eax: 00000000 ebx: 00000009 ecx: 00000000 edx: 00000000
[EMERG] edi: 00000009 esi: 76b218c4 ebp: 00000000 esp: 76b29100
[EMERG] 0x76aeb8f8: c4 2c 5b 5e 5f 5d c3 56
[EMERG] 0x76aeb900: 53 83 ec 14 65 a1 00 00
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: If2acdc16f37cdae0292f55d210b058f82179bfb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The ADL RVP has an i219 PHY connected to the PCH internal MAC.
Enable it to have working ethernet on the board.
Test:
Added GBE region and verified that the PCI device 00:1f.6 is working.
Change-Id: I2ca1af00ae4564a04f5388cd3734bb735d87352e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Due to a non-optimal RX signal (receive) on PCIe root port #4 (00:1c.3)
and #5 (00:1c.4), the speed must be limit to Gen 1.
BUG=none
TEST=RX signal measured with oscilloscope
Change-Id: I695c0ef961290676fe421b6efd631d6e94d6d556
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73767
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
In cases where there are limitations on the connected device behind the
PCIe root port it can be necessary to limit the speed. The FSP parameter
'PcieRpPcieSpeed' allows to set the speed limit.
This patch provides a chip config so that this FSP parameter can be set
as needed in the devicetree on mainboard level.
Change-Id: I9fc24de1682279e4ae4c090147a6ef7995b441bc
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Add the AlderLake-P 4+4+2 (28W) with MCH_ID 0x4629 to the
vr_config table.
Change-Id: I606ef429f47dfe386177f7257b153acc1611bb61
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Add the pstate_msr union of a bitfield struct and a raw uint64_t to
allow easier access of the bitfields of the P state MSRs and use this
bitfield struct in get_pstate_core_freq and get_pstate_core_power. The
signature of those two function will be changed in a follow-up commit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic489b8e1332dde2511647c065ccbdef541bcbcc5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Add the pstate_msr union of a bitfield struct and a raw uint64_t to
allow easier access of the bitfields of the P state MSRs and use this
bitfield struct in get_pstate_core_freq and get_pstate_core_power. The
signature of those two function will be changed in a follow-up commit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If92a4773c669ac2df45396eee52f6de780adbdca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Naresh Solanki