Use the apps processor watchdog reset to do a hard reset.
The watchdog reset drives the RESETOUT on the chip.
Modify register address definitions to be able to use pointers and
pointer arithmetics.
BRANCH=storm
BUG=chrome-os-partner:34334
TEST=the chip resets and the control returns to start of SBL.
Change-Id: Ib5772ab152b27058fde1be9de2d2ac26bfe00ca4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d50413cb614ef05ada93be1252fe5ef617a94d91
Original-Change-Id: I9b249d057b473429335587f7241ca462b4a6a8b7
Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236141
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Reviewed-on: http://review.coreboot.org/9691
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Read the TZBSP blob from CBFS and run it. A side effect of the blob
execution is switching the processor into User mode.
Starting TZBSP requires processor running in Supervisor mode, TZBSP
code is compiled for ARM. Coreboot is executing in System mode and is
compiled for Thumb. An assembler wrapper switches the execution mode
and interfaces between Thumb and ARM modes.
BUG=chrome-os-partner:34161
BRANCH=Storm
TEST=manual
With the preceeding patches the system successfully loads to
depthcharge in recovery mode.
Change-Id: I812b5cef95ba5562a005e005162d6391e502ecf8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7065cf3d17964a1d9038ec8906b469a08a79c6e2
Original-Change-Id: Ib14dbcbcbe489b595f4247d489d50f76a0e65948
Original-Signed-off-by: Varadarajan Narayanan <varada@qti.qualcomm.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229026
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9690
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Booting depthcharge requires much larger CBFS cache, but by the time
depthcharge is being booted DRAM is already initialized. Use different
memory spaces for CBFS cache before and after DRAM is available.
Also, make sure that CBMEM uses memory below CBFS cache in DRAM.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=with this change on Storm ramstage finds and boots depthcharge in
recovery mode
Change-Id: Icd1bbf4bcc5f9d92b2653b5a8891409105a25353
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e1e0b029b7fb09b84784373150cc4ce9eea7b3f5
Original-Change-Id: I33fd97806b2db6fab2adc44b67e5f54258642967
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234543
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9688
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Read two blobs from CBFS: cdt.mbn (memory configuration descriptor)
and ddr.mbn (actual memory initialization code).
Pointer to CDT which starts right above the MBN header is passed to
the memory initialization routine. Zero return value means memory
initialization succeeded.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=with upcoming patches memory initialization succeeds.
Change-Id: Ia0903dc4446c03f7f0dc3f4cc3a34e90a8064afc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1d79dadd7d47dd6d01e031bc77810c9e85dd854b
Original-Change-Id: Ib5a7e4fe0eb24a7bd090ec3553c57cd1b7e41512
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234644
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9686
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This change sets up the list of source files for vboot2's
verstage without enabling it.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=not much testing yet, just successful compilation.
Change-Id: I4052c20795459bf0e057c0f0952226ea4a8c89f1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 48847ab8acfbe4b33d61d3d012c72c025cd8f364
Original-Change-Id: I1d7944e681f8a4b113a90ac028a0faba4423be89
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234643
Reviewed-on: http://review.coreboot.org/9684
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With introduction of uber-sbl SRAM usage pattern is changing, this
introduces the new memory layout.
This patch overlays DDR initialization code with uber-sbl, as uber-sbl
goes out of scope as soon as bootblock starts.
A 4K block at offset 0x3f000 added in the comments, this is a shared
structure used by different QCA modules.
This suggested layout is not final, but will allow to move closer to
the production image.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=with other patches applied Storm boots all the way to rombase and
initializes DRAM.
Change-Id: I46af81b39b09935aa7fffdabda223e7e64c7a446
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a20c0570361038c0ae406dcb1f4bc657eea120f6
Original-Change-Id: I927f6ffc524fc8f0effd7b91d3f5d1e8d6be1530
Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229023
Reviewed-on: http://review.coreboot.org/9683
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
LPAE (large physical address extension) is not available on this SOC
core, do not enable it.
[pg: we already had this one, but somehow LPAE slipped in again]
BUG=chrome-os-partner:27784
TEST=coreboot still comes up on AP148
Change-Id: Iaa80022c611f7377d8f4100487d32654150836d8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e6e12c39efd54e4fcbd444134bf30e211948a71b
Original-Change-Id: I9e9ad1aeaf613f04987c0c306a574085042d0e7b
Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/198023
Original-Reviewed-by: deepa dinamani <deepad@quicinc.com>
Reviewed-on: http://review.coreboot.org/9682
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The gpio access code has been moved to a separate file to match other
platforms. Accessor functions are added to read different switches
state. They will be read by verstage, when it is enabled, and by
ramstage, for passing the values to depthcharge.
It is unfortunate that the gpio values are not being cached and can
change by the time CBMEM table is filled, but we have to live with
that for now.
BUG=chrome-os-partner:33756,chrome-os-partner:34161
BRANCH=storm
TEST=none yet.
Change-Id: I229fed0e35d643912f929671d5fc25aee5d1d167
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e15aa281a1dbf2c463650b6c04991436022d8d4
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I940b54cd3cf046b94d57d59d370e634a70a8bbeb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229426
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9681
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- These should be 64bit values so when they try to return -1
it is interpreted properly by the kernel.
- The GPE value needs to be reset at the start so it does not
return stale data from a previous resume.
- If a GPE register is zero the value should only be updated
if it has not yet found a set bit.
BUG=chrome-os-partner:34532
BRANCH=samus,auron
TEST=build and boot on samus, suspend/resume with various
wake sources and ensure the reported _SWS values are correct
in every case.
Original-Change-Id: Ic6897f20ad2f321f3566694c032b75a3db120556
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/235012
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit be3c79b87b81563f744eb885708a52730debaccb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I801c6e4f90dde0f5f69685f987a9831ee5e99e4a
Reviewed-on: http://review.coreboot.org/9699
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This code that stores the initial timestamp is not being used,
instead the timestamp is passed to romstage_main().
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Original-Change-Id: I0e0fa1ba74ab93d4454fdfa12208e712d2ae913c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234402
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 838112cf79e2b4d51e5dc87d5ac9cd7e03807f29)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8fd7ba72c14c1e39f7bfa3a1ae8d03289a2abf73
Reviewed-on: http://review.coreboot.org/9698
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to avoid a 300ms timeout waiting for mbp_cleared flag
to be set there is a new flow for the ME10 1.5MB firwmare that
we can follow which will save significant boot time.
This requires sending new commands that do not generate an ACK
message, and ensuring an HMRFPO LOCK message is sent.
In addition now that the delay is removed clean up the ME path
to do the work in init() step and add a final() step that does
the disabling of the PCI device.
BUG=chrome-os-partner:30637,chrome-os-partner:34134
BRANCH=samus,auron
TEST=build and boot on samus, measure ~300ms speedup in boot time
Original-Change-Id: I753087ecd65f6ebed9f812318a359f893e01da9f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234400
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 25aff4b188dc94a99af30869a162e01e3fa8dee7)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia35373548a902a718155a1a57057f55067d2f3ac
Reviewed-on: http://review.coreboot.org/9697
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the blobs from the coreboot tree and get them from
3rdparty.
Change-Id: I0798091530be9654d7e073839b4efeb3f9c0302c
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/9694
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Remove the blobs from the coreboot tree and get them from
3rdparty.
Change-Id: I4938b5c47e6ae7059eda144b664aeafdd674f0fb
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/9693
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This patch adds a new "backlight" output GPIO to the coreboot table in
order to avoid redundantly defining that GPIO in the payload.
BRANCH=veyron
BUG=chrome-os-partner:34713
TEST=Tested together with corresponding depthcharge CL.
Change-Id: Ia997beb1a400136ad65d8f0217781c9782f6e8a5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 04ce4c23573cf926aeef3d817d3ab00835f897c7
Original-Change-Id: I69b3c7ac6be4b9723b6a0dfecef5e1c4ea681aff
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242400
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9652
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
LDO4 and LDO5 are not turned on with the boot0 and boot1 RK808
strappings that we use on Brain.
BUG=none
BRANCH=none
TEST=built and booted on brain
Change-Id: I00393ca54958d9fff926606405edcd84901e4048
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c4c1862585fd058a8a9c8237c701b3bbf3b8aa83
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I846ef9d67a780cc07414d545524b9ec0b8490cf1
Original-Reviewed-on: https://chromium-review.googlesource.com/241734
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9648
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Danger has EDP, the original code was copied from Brain which
didn't.
BUG=none
BRANCH=none
TEST=built and booted on danger
Change-Id: Ib8e48078cc51fe0e1fb7049f70e810b8f0a7690a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 25fc6b4d82fb4bd80798cc809af4dacc6208109e
Original-Change-Id: Ic8b3f685e08bb96125c57d42db6a10e348a1a096
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/245161
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9679
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This applies the differences between Brain and Danger:
- Danger has an SDMMC slot
- Danger has a USB hub (TODO)
- Danger has LVDS (TODO)
- Add workaround for incorrect RAM_ID strapping
BUG=none
BRANCH=none
TEST=emerge-veyron_danger coreboot works
Change-Id: Idec527744de2583613b290e3e88850b33ff1c23d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 89278c2eeae4bae989a3549da627c5bbd5dd0d5a
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Iae3f85d4f41e04465a5046f2334c693337d006a4
Original-Reviewed-on: https://chromium-review.googlesource.com/241712
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9647
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This adds a directory with files copied over from Brain along with
build-related changes so that emerge-veyron_danger works. The next
patch will account for other differences.
BUG=none
BRANCH=none
TEST=emerge-veyron_danger coreboot works
Change-Id: I7ebd431cd48e257dfa761d32013d0e251b4f155d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a0f7d2f96540df6fdcd7a99d9e0fa02bbc6c1f73
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id265a7715f07a647a449f00097bf40f7c9b4c068
Original-Reviewed-on: https://chromium-review.googlesource.com/241711
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9646
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
decode_edid() parses the whole EDID buffer, regardless of whether there
is an extension buffer, so we pass the size of the EDID actually read to
prevent EDID parser getting the wrong data.
BUG=chrome-os-partner:35053
TEST=Boot from jerry
BRANCH=veyron
Change-Id: I5951b670f129cf4765a5199cb58ac6abff5478a6
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4d508647efc0a9d48b2a4b23c12a54b63af2813e
Original-Change-Id: I8cd8e09025520322461fe940b01e4af3995b5ecd
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/240643
Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: http://review.coreboot.org/9645
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This adds RTC functions to the existing RK808 driver.
BUG=chrome-os-partner:34436
BRANCH=none
TEST=with eventlog patches applied to pinky, booted and saw eventlog
entries generated with correct timestamps:
localhost ~ # mosys -k eventlog list
entry="0" timestamp="2015-01-06 13:45:33" type="Log area cleared" bytes="4096"
entry="1" timestamp="2015-01-06 13:45:33" type="System boot" count="0"
entry="2" timestamp="2015-01-06 13:45:33" type="Chrome OS Developer Mode"
Change-Id: I1df70a2ca94ff463ffea8d9f02d951d6c62e6b08
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a304f7e6954f585f04feef54c4902dcb25a39fcc
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I3a240e342a54b2e7023da71708d0d70f5131f0b9
Original-Reviewed-on: https://chromium-review.googlesource.com/238525
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9643
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This moves PMIC_BUS from each mainboard's board.h file to a per-
mainboard Kconfig variable. To prevent humans from forgetting to
set a valid value, an invalid default is set in the rk3288 Kconfig
and checked in rk808.c so that compilation will fail if the mainboard
Kconfig does not override it.
Originally, PMIC_BUS was only used by mainboard code as an argument
to RK808 PMIC functions. To conform to the generic RTC API, however,
the RK808 code needs to have the bus number globally defined somewhere
since the rtc_get() and rtc_set() functions don't take any args.
Since CONFIG_PMIC_BUS is globally visible, we no longer need to pass
bus number to the PMIC functions.
BUG=chrome-os-partner:34436
BRANCH=none
TEST=built and booted on Pinky
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I73783878e507b2e7b1526dd2f81cfbdf8f1e2a55
Reviewed-on: https://chromium-review.googlesource.com/240203
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9642
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This patch implements support for the CRYPTO module in RK3288 and ties
it into the new vboot vb2ex_hwcrypto API. We only implement SHA256 for
now, since the engine doesn't support SHA512 and it's very unlikely that
we'll ever use SHA1 for anything again.
BRANCH=None
BUG=chrome-os-partner:32987
TEST=Booted Pinky, confirmed that it uses the hardware crypto engine and
that firmware body hashing time dropped to about 1.5ms (from over 70ms).
Change-Id: I91d0860b42b93d690d2fa083324d343efe7da5f1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e60d42cbffd0748e13bfe1a281877460ecde936b
Original-Change-Id: I92510082b311a48a56224a4fc44b1bbce39b17ac
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236436
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: http://review.coreboot.org/9641
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
BRANCH=None
TEST=emerge-veyron_speedy coreboot
BUG=None
Change-Id: Iab377e93472db0b7778df020afa84ee97f0e4079
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: fedf6ed7dc220d58ad10d49ac9ea02443746e77e
Original-Change-Id: Id5024bfd32a0aa1fb00f3af8dc337ccccaf40729
Original-Signed-off-by: Jiazi Yang <Tomato_Yang@asus.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/237544
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Trybot-Ready: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9640
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
BUG=None
TEST=emerge veyron_speedy and boot the Speedy board
BRANCH=None
Change-Id: Ida5fd6d839a2e704760a90e9c723c1b688ea6a84
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 42c0d11c3ec65874986c06ca4d7b34f5987f9409
Original-Change-Id: I2f0cff74517a8c031eabb64f4f82d455195c8dd1
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234715
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9639
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This applies the differences between Jerry and Brain:
- No EC
- No SD card
- Minor changes to GPIOs (no lid, power button active low)
- No variations between board IDs (yet)
- No backlight/display attached, but we do have some HDMI
and VOP configuration (need to double check that it's right).
BUG=none
BRANCH=none
TEST=built and booted on Brain (requires follow-up CL
to get into depthcharge)
Change-Id: Idbbc19856e05a145637c28d87c3e19855d13f03b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 67151129c28ca7dd83464e5a5c183d006299293c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I3c761d3d4d186a6208a772c05193bdcbd4a5c105
Original-Reviewed-on: https://chromium-review.googlesource.com/235921
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9638
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This adds a directory with files copied over from Jerry, in addition to
build system related changes (configs/* and Kconfig stuff) necessary
to emerge-veyron_brain coreboot.
The next patch will account for differences between Jerry and Brain.
BUG=none
BRANCH=none
TEST=emerge-veyron_brain coreboot works
Change-Id: Ib0da9caf80f46991b96bcb5756f807237f0902e1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 9509d6277dae25a78062c1301054a39f704b33fe
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I972f2623d9b0a43e3ea5312b3c4cd34ab44edc36
Original-Reviewed-on: https://chromium-review.googlesource.com/236989
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9637
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This BCT table is the same as "ramcode == 1", and has been pass the stress
test with this new Micron type.
-Micron MT41K256M16LY-107:N, ramcode = 4
BUG=chrome-os-partner:32071
TEST=emerged coreboot, booted successfully into kernel.
Change-Id: I80990fec6faf5dd2b8090658d865cc8dde31b753
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bce2bf1fd518077e06d70d78a65d58ddef7b7bc6
Original-Change-Id: I2c0b28fdafb5299784519e641aa4edb53d0c36b2
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/236514
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9636
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Due to a missing i2c_init(), we were actually running our TPM with
default divisors at 660KHz. Oops.
While it's commendable that both the TPM and our controller seem to have
been running fine all this time at more than 1.5 times the maximum
frequency they support, we should probably still get that fixed.
Also sync Speedy back up to the other Veyron boards since it seems to
have missed a recent SDMMC patch.
BRANCH=None
BUG=None
TEST=Booted Pinky.
Change-Id: I255c66624b21bf48b12f950208ba2c401a75c4e4
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f2bd7c8579cd90d2f800c777c1981557d81a9b49
Original-Change-Id: I43e6b5fe02aca605a5b243c5b876bd44b90b2bf9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236580
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9634
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This switches all the rk3288 platforms to use the common CBFS wrapper
instead of implementing its own CBFS media driver. It also happens
that veyron_* platforms use Gigadevice SPI flash (at least for now).
As we use more SPI-related stuff, for example eventlog and vboot data in
Brain's case, we will need to use more of the SPI API anyway. This
prevents us from having to duplicate pieces of it for rk3288.
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Change-Id: Ie462456814646fdc277485d9e2d8c901fd4936e7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2d6df2fe6d78bc8eee8689019b9aaf29c82b6b30
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id307bd5fb6cc8f79411d8c66e1370e80c58d017b
Original-Reviewed-on: https://chromium-review.googlesource.com/235882
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9678
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
BUG=None
TEST=emerge veyron_mighty and boot the Mighty board
BRANCH=None
Change-Id: I0047569c9eed7a3881500ba3b05e6726ba8d7b8f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 49366e5bb3ecdec38c898c936392e5d77a91cd53
Original-Change-Id: I3fcdc837e8d7e62c145850f549662d8260aa1120
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234714
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9633
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
BUG=None
TEST=emerge veyron_jerry and boot the Jerry board
BRANCH=None
Change-Id: I38cb0106694ada431e6ab6194fce7ba1822bcbcf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 6a061072860f74874f0098062806c01bdcb447bd
Original-Change-Id: I6eb0900516bcd95159c472749c54d356448d2344
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234713
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9632
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
BUG=None
TEST=emerge veyron_pinky and boot the Pinky board
BRANCH=None
Change-Id: I75bc1b7681c9a3d7dc2868a2b260884538587dbd
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 66069927618924af02a4e17503fa49ae2c31fdfc
Original-Change-Id: I06242ade0cabbba56b16b3832a1b4b09bec6f06b
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234712
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9631
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
We use the devicetree to pass the backlight control gpio before,
but if there have different board version, and it uses different
io to control backlight, it will hard to distinguish it. So, we
move the backlight control to mainboard, and use board_id
to distinguish the backlight control.
BUG=None
TEST=emerge veyron_pinky and Boot the pinky board
BRANCH=None
Change-Id: Ifa81eb2455296f4b4285b681208f4393f266fb34
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 2ff7f65134dcf97f97757750eab41dcf8c7765d3
Original-Change-Id: I1ec8e04f4982c3a8c7e31d8dc2c75311b7199ffc
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234711
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9630
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Like Nyan, Veyron boards use a GPIO to reset the system so that we can
make the accompanying TPM reset secure and unforgeable. The normal
kernel reboot driver knows that, but the SoC-internal watchdog doesn't.
This patch implements a check for the global reset status register in
the early bootblock and triggers a hard_reset() when it matches "first
global watchdog reset" or "second global watchdog reset". Seems that
the difference between the two is is a choice controlled by
wdt_glb_srst_ctrl (unconfirmed), and we want this code to run in both
cases.
BRANCH=None
BUG=chrome-os-partner:33141
TEST=Run 'mem w 0xff800000 0x9' from the command line, watch how you end
up in recovery without this patch but can boot normally with it.
Change-Id: Ice79648831e1e97d22325711da9e82bbf6bf3c75
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 5d7cb52b2c2dcb2fff0bf83fc168439dade4b1b7
Original-Change-Id: I2581bde84f0445c15896060544e9acb60de91c8c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231734
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9629
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Add the Samsung-4GB and Hynix-4GB LPDDR inc files.
Use ram_id 1000 correspond to Samsung-4GB LPDDR
and use ram_id 1001 correspond to Hynix-4GB LPDDR.
BUG=chrome-os-partner:33269
TEST=Boot veyron_speedy normal
BRANCH=None
Change-Id: I21983c48e1e99aa70ae9bb3fb6550ae9af472015
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d34b19dc9b57b4f31dc1b28581f3f8fc0fcc7e6b
Original-Change-Id: I55b6968c642df8c1f579e518232ab5d278e7e12f
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233859
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9628
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Essentially a copy of veyron_jerry for now
BUG=chrome-os-partner:33269
TEST=emerge-veyron_speedy coreboot
BRANCH=None
Change-Id: If8f32122e301df1766bca68b11efd8afe8be5e87
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f49a151e1dd956ed2cf3ba0b1f9307442b61e639
Original-Change-Id: Ife457db4fd67fe69bcd4082694b3372eccfb304b
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233822
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9627
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The only way to reliably reset an SD card in an unknown state is by
power-cycling. Since a kernel may crash and reboot at any point, SD
cards may be left in one of them fancy high-throughput modes that
depthcharge (or, in fact, a newly booting kernel without prior
knowledge) doesn't support, so we need to reset the card on every boot.
This patch adds support to turn off an RK808 regulator completely and
uses that to turn off SD card power rails in early romstage. The time
until configure_sdmmc() in ramstage turns them back on should be more
than enough to drain the power rail for an effective power-cycle.
BRANCH=None
BUG=chrome-os-partner:34289
TEST=Booted a Pinky from SD card, noticed that it works before and
after this patch.
Change-Id: Iaa5f7adaa59da69a964785c5e369ad73c6620224
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 95fba21907f1f3f686cb5a95b993736247db8f96
Original-Change-Id: I904b2d23ca35f765c000f9bee7637044f674eff9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/233713
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Original-Tested-by: Alexandru Stan <amstan@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9626
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This function was added in upstream but was missing in Chromium OS
Change-Id: I35debf65153e5f280343eebfe91438ecf665ba22
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9677
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Commit 54229a7 (arm: Fix checkstack() to use correct stack size) didn't
quite hit the mark. Due to the crazy way our Kconfig includes work, It
accidentally set CONFIG_STACK_SIZE to 0 even on architectures that need
it.
This patch fixes the issue by moving everything back to a single entry
in src/Kconfig, making sure we end up with the intended numbers on all
architectures.
BRANCH=None
BUG=chrome-os-partner:34750
TEST=Built for Pinky, Urara, Falco and Ryu. Confirmed that the generated
.config contained CONFIG_STACK_SIZE=0x0 for the former two, and
CONFIG_STACK_SIZE=0x1000 for the latter.
Original-Change-Id: Ib18561925aafe7c74e6c4f0b10b55000a785e144
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236753
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit c64b127e163f98162f3f7195b6ed09bd5a4b77c4)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I2c747b04760bc97f43523596640bfb15317e5730
Reviewed-on: http://review.coreboot.org/9696
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Tested-by: build bot (Jenkins)
Coreboot is designed to have a single serial console at most, on top
of that it may have a CBMEM (virtual) console. Matters are complicated
by the fact that console interface is different between bootblock and
later stages.
A linker list of console driver descriptors is used to allow to
determine the set and type of console drivers at compile time. Even
though the upstream seems to have done away with this approach, which
does not seem the best idea.
As an alternative this patch introduces a common wrapper which
different UART drivers can plug in into. The driver exports a single
API which can be used both directly (in bootblock) and through the
wrapper (in later stages).
The existing drivers can be adjusted to fit this scheme one by one.
The common UART driver API also aligns fine with the upstream
approach.
BUG=chrome-os-partner:27784
TEST=none yet
Original-Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196660
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 94a36ad79a96f83d283c0fd073b05f98ae48820c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1
Reviewed-on: http://review.coreboot.org/7872
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
make oldconfig doesn't like 'y' as response to a choice item
such as the architecture list. An empty response, however, is
acceptable, so use that.
Change-Id: Ic3164dd3f40e4a7f5d91e3a7008893655cd69ac2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9676
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The ethernet switch, as soon as it is taken out of reset comes up in
default (bridging) mode, which allows traffic to flow freely across
the ports.
Let's keep it in reset such that there is no cross port traffic
happening while the device boots up.
BRANCH=storm
BUG=chrome-os-partner:32646
TEST=verified that the switch is held in reset during boot.
Change-Id: Ia1dbb47d892d564145da17425a596bf9bad40d29
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 50551d8c9a44d1b63e0948070f6573adf7729d37
Original-Change-Id: I6bf698beddc98ce18fee6b3b39622e356c8cfbad
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224989
Original-Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
Reviewed-on: http://review.coreboot.org/9465
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This adds the TPM device to the devicetree and configures an
active high edge triggered interrupt at IRQ10 and adds the ACPI
Device for the TPM into the DSDT.
It also cleans up the EC PNP ID to use the EISAID for an EC since
there are now two PNP devices declared, and removes the unused
ENABLE_TPM define at the top of the DSDT.
BUG=chrome-os-partner:33385
BRANCH=samus
TEST=build and boot on samus, ensure TPM is functional at IRQ10
CQ-DEPEND=CL:226661
Change-Id: I4b9b016014d136fbf9a37003003632821ae93a53
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0420e27b05d0f1568efa9beb849e0e8ff5995c86
Original-Change-Id: I2660cb30ac535da0b255603a619b9c09681ca947
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226663
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is not a standard feature so it should be included by the
mainboard if it is actually present in a system.
BUG=chrome-os-partner:33385
BRANCH=samus,auron
TEST=build and boot on samus
CQ-DEPEND=CL:226663, CL:226664
Change-Id: Id4d0e5ed243dcb95e64fb8c848667f651b75aa4e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 8909913f5c11c5805c77a3373859634b02a301e2
Original-Change-Id: Ib7c171a5a007a2dddfb3d80341c6dc488e383e99
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226662
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9470
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since CL:226662, all TPMP accessing should be removed as well,
else it will cause wtm2 coreboot failed on build.
BUG=none
BRANCH=none
TEST=./setup_board --board=fox_wtm2 && emerge-fox_wtm2 coreboot
CQ-DEPEND=CL:226662
Change-Id: Ib25f2d32997ef82b0ebf049803f2c5002a0a3abf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c99456bf42544518e2a36b6e0bbfe7f4ee1b4aff
Original-Change-Id: Ia0eebb1924bbb23979c880f7d05600a0cf1e4ca3
Original-Signed-off-by: Harry Pan <harry.pan@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/232165
Original-Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9477
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change is made only to make sure there is a good
signal strength on the SPIM lines.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works properly
BRANCH=none
Change-Id: I5b9427b14a407746fb5b707fa3b07a1a6774bfb1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e9d953283a5b43bf967128ca73db0e90c2df32df
Original-Change-Id: Ia589134cf0557613697d49fb0bdb1848af66f0e8
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/249732
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9675
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Deepa Dinamani