Commit Graph

5377 Commits

Author SHA1 Message Date
Rudolf Marek 837403dddf Following patch fills in the callbacks for PCIe x16 resets. This board uses GPM8,GPM9 as reset toggles.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> 
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26 19:46:08 +00:00
Scott Duplichan 656060d1d9 Correct error in ASRock E350M1 commit that breaks build for ASRock 939a785gmh.
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6383 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26 18:42:04 +00:00
Scott Duplichan 63896e75b4 Add support for the ASRock E350M1, an AMD family 14h Fusion board.
A video option rom must be added for UMA graphics support. It can
be extracted from the supplied UEFI BIOS.

ASRock E350M1 support is based on the AMD persimmon project. The
major differences are SIO model and DIMM SDP addressing. With this
coreboot and seabios, the board can boot DOS from a SATA drive and
can boot WinPE from a USB flash drive. I was unable to get
Windows setup to run.

The board has a socketed SPI flash BIOS chip and a serial port
header. The SIO is Nuvoton NCT5572D. Using coreboot's existing
Winbond w83627hf is a good enough match to get the serial port
and keyboard working.

Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6382 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26 17:49:49 +00:00
Rudolf Marek 199c694f49 It adds support for automatic PSS object generation for AMD pre fam Fh CPU. Those CPUs require a hardcoded table, which I managed to rewrite during one particularly boring flight. Too pity it is only for Opteron CPUs. Someone needs to finish the second PDF for All others Athlons and Semprons.
Also it enables the FID/VID changes in SB. Jakllsch had some troubles with that too but on am2 CPU. Those bits are only documented in SB600. They arent in RRG RPR and BDG.

Signed-off-by: Rudolf Marek <r.marek@asssembler.cz> 
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26 13:34:01 +00:00
Josef Kellermann ed1d116e62 Add compile-time defaults to some K8 CMOS options in case they're absent in CMOS
This affects the CMOS options iommu, ECC_memory, max_mem_clock,
hw_scrubber, interleave_chip_selects.
If they're absent in cmos.layout, a Kconfig value is used if it exists,
or a hardcoded default otherwise.

[Patrick: I changed the ramstage CMOS handling a bit, and dropped the
reliance of hw_scrubber on ECC RAM, as it has nothing to do with it -
it's the cache that's being scrubbed here.]

Signed-off-by: Josef Kellermann <seppk@arcor.de>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6380 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24 14:35:42 +00:00
Josef Kellermann 855224bb28 Add new option 'sata_mode' to CMOS and 'SATA_MODE' to Kconfig for AMD SB600
coreboot used to set the chipset to IDE mode unconditionally.
Now, the user has a couple of ways to choose the configuration:
- If a CMOS variable sata_mode exist, it is used to decide if IDE or
  AHCI is to be used as interface.
- If not, a Kconfig option is used.
- If unchanged, the Kconfig option is set to IDE.

So unless the cmos.layout is extended or Kconfig is modified, this won't
change behaviour.

[Patrick: Compared to Josef's version, I changed the Kconfig option to
be boolean, instead of a magic string. Also, the "IDE" default is
handled in Kconfig, instead of an additional line of code.]

Signed-off-by: Josef Kellermann <seppk@arcor.de>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6379 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24 13:54:10 +00:00
Patrick Georgi 20bd19619e Tyan/s2735 doesn't need to define its own hard_reset function anymore.
The southbridge already provides hard_reset.

Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6378 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24 07:43:37 +00:00
Patrick Georgi c977c7df71 libpayload: Move stdin/stdout/stderr away from headers
Otherwise they exist in several object files, confusing the linker

Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6377 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24 07:18:11 +00:00
Scott Duplichan a649a96efe git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6376 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 2011-02-24 05:00:33 +00:00
Patrick Georgi 71b8480921 Move coreboot specific rules and setup to toplevel Makefile.inc
KERNELVERSION issue found by Stefan is fixed.

Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6375 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-22 14:35:05 +00:00
Sven Schnelle 541269bc85 [i945] Add SPD adress mapping
The current code works only with dual channel if Channel 0 uses SPD address
0x50/0x51, while the second channel has to use 0x52/0x53.

For hardware that uses other addresses (like the ThinkPad X60) this means we
get only one module running instead of both.

This patch adds a second parameter to sdram_initialize, which is an array with
2 * DIMM_SOCKETS members. It should contain the SPD addresses for every single
DIMM socket. If NULL is given as the second parameter, the code uses the old
addressing scheme.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6374 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-21 09:39:17 +00:00
Rudolf Marek 0c8e664713 It turns out that the code which enables specific LDN is somewhat buggy.
Instead of enable the device the device gets disabled. However after some time the serial line gets back, most likely some "enable resources" might fix it. 
I'm attaching patch which somewhat fixes the problem and changes the function to look same in all superio code. Some boards even did not convert the dev->enabled to 0,1 values. 


Signed-off-by: Rudolf Marek <r.marek@assembler.cz> 
Acked-by: Peter Stuge <peter@stuge.se>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-19 14:51:31 +00:00
Patrick Georgi b8cdd9b450 Handle compiler options for source classes more generically
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6372 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-17 20:48:45 +00:00
Patrick Georgi 58262656c6 Make Makefile.inc parser loop more generic
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6371 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-17 20:47:49 +00:00
David Hendricks b159f7ab37 add mec1308 support to superiotool
This patch also disables FDC37M81x since it has a conflicting device ID
and is not supported very well anyway.

Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Reinauer <reinauer@google.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6370 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-17 00:52:02 +00:00
Alexandru Gagniuc 650cf237ac Fix build errors introduced in r6367
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16 17:40:04 +00:00
Sven Schnelle e8a7df84ad Add ACPI code for Lenvo X60
It currently supports:

- Sleepbutton
- AC state
- Battery state
- Interrupt routing
- Display Brightness control
- Hotkeys

Signed-off-by: Sven Schnelle <svens@stackframe.org>

Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6368 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16 15:04:59 +00:00
Alexandru Gagniuc 025ead7792 Extended K8T890 driver to include the K8T800 and K8M800 northbridges
The K8T800 is almost identical to the K8T800Pro, also added to this patch.
The K8T800_OLD is also defined, which is an older version of the K8T800,
but which has no driver and early HT code yet. Also extended the K8M890 VGA
driver to work for the K8M800 (not tested). According to the datasheet, the
K8T890 and K8T800 are similar enough to be able to use the same
initialization code. At least for the K8T800, this is sufficient to have
a working HT link with the CPU, and to initialise the V-Link to the
southbridge.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6367 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16 13:43:00 +00:00
Sven Schnelle ddb3f0adaa Lenovo ThinkPad X60: Enable SMI handler
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6366 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16 13:12:41 +00:00
Peter Stuge 7afbb9936f Remove more files and lines mistakenly copied from Roda to X60
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15 13:07:32 +00:00
Peter Stuge 7d5966deb2 Remove ACPI mistakenly copied from Roda to ThinkPad X60
It is incorrect, and will be replaced with proper ACPI for X60.

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6364 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15 11:14:17 +00:00
Marc Jones 1c427a7a4a Remove Inagua Kconfig items for external VGA and AHCI binaries. These can be addded by the developer if needed.
Fixes abuild issues.

Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Marc Jones <marcj303@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6363 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15 00:27:24 +00:00
Stefan Reinauer dd6c1e67f6 SERIAL_POST was renamed to CONSOLE_POST a while ago
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6362 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15 00:23:05 +00:00
Stefan Reinauer f58b63d6dc use git.seabios.org for checking out seabios.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6361 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15 00:14:32 +00:00
Sven Schnelle e2ca71efd9 Lenovo ThinkPad X60 / X60s Support
Adds support for Lenovo X60 series ThinkPads. So far, only X60s
(Model 1703) has been tested.

It's a basic patch without SMI and ACPI, as this makes it easier to
review. SMI and ACPI patches will follow.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6360 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 20:02:47 +00:00
Patrick Georgi b912289573 Use fprintf(stderr, ...) in library
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6359 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 19:26:22 +00:00
Patrick Georgi cd913bdf5c Stub out FILE*, stdout/stdin/stderr and implement fprintf on these
- Add FILE*
- Add stdout, stdin, stderr stubs
- Add fprintf that redirects to printf for stdout and stderr and fails otherwise

Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> 


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6358 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 19:25:27 +00:00
Patrick Georgi a4a022c941 lpgcc was too noisy in some cases
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> 


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6357 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 19:24:37 +00:00
Patrick Georgi 6b5ca4efb9 Some more POSIX compatibility
- Add assert.h
- Add arpa/inet.h
- Add assert macro

Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> 


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6356 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 19:23:33 +00:00
Josef Kellermann f0ccf6ed18 Errata #169 works on HT, not MC
Signed-off-by: Josef Kellermann <seppk@arcor.de>
Acked-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6355 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 19:21:28 +00:00
Josef Kellermann cf37a5942f Removed LPC DMA Deadlock workaround...
Setting bit#21 in k8_f0#68 is part of the errata#169
which is handled in amdk8/coherent.c

Signed-off-by: Josef Kellermann <seppk@arcor.de>
Acked-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6354 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 19:19:58 +00:00
Patrick Georgi 144fe88338 Fix Typo. (and why is that file, and some of its siblings per-board?)
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6353 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 19:15:36 +00:00
Frank Vibrans 69da1b676c Add IBASE DB-FT1 and AMD Inagua motherboards. Patch 8 of 8.
This code provides support for IBASE Technology DB-FT1 (AMD code name Persimmon) and AMD Inagua platforms. It is dependent on all other patches in this set.

Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Marc Jones <marcj303@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6352 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 19:04:45 +00:00
Frank Vibrans 7b904d84ba This code provides support for the superio chip on the AMD Inagua platform (not commercially available). It is independent of the AMD>code.
Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Marc Jones <marcj303@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6351 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 19:00:13 +00:00
Frank Vibrans 6b4674e289 I missed a file that was part of the AMD AGESA CPU wrapper checkin, r6347.
Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6350 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 18:56:10 +00:00
Frank Vibrans d0a8ebf053 This code provides support for the superio chip on the IBASE Technology DB-FT1 (AMD code name Persimmon) platform. It is independent of the AMD code.
Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Marc Jones <marcj303@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6349 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 18:52:15 +00:00
Frank Vibrans 0822ad8b19 This code fixes a number of build issues related to the AMD Agesa code. The particular issues are global variables existing in romstage and the use of GCC intrinsics in the build. The former issue will be addressed shortly, and the latter issue requires community assistance. This code is dependent on the AMD Family 14h mainboard code.
Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Marc Jones <marcj303@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 18:47:37 +00:00
Frank Vibrans 420faca0d0 Add AMD cpu wrapper code. Patch 4 of 8.
This code provides cpu early initialization for Family 14h cpus. It is dependent on the AMD Agesa code.

Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Marc Jones <marcj303@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6347 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 18:42:12 +00:00
Frank Vibrans 63e62b03a8 This code provides southbridge initialization for SB800 south bridges. It is dependent on the AMD CIMx/SB800 code.
Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Marc Jones <marcj303@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6346 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 18:38:14 +00:00
Frank Vibrans 39fca80b00 This code provides cpu northbridge initialization for Family 14h cpus. It is dependent on the AMD Agesa code.
Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Marc Jones <marcj303@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6345 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 18:35:15 +00:00
Frank Vibrans 2b4c831b4d Add AMD Agesa and AMD CIMx SB800 code. Patch 1 of 8.
This code currently generates many warnings that are functionally benign.  These are being addressed, but the wheels of bureaucracy turn slowly.  This drop supports AMD cpu families 10h and 14h.  Only Family 14h is used as an example in this set of patches.  Other cpu families are supported by the infrastructure, but their specific support is not included herein.  This patch is functionally independent of the other patches in this set.

Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Marc Jones <marcj303@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 18:30:54 +00:00
Rudolf Marek 74ad66cdc1 Attached patch fixes the LPC decode ranges of SB600/SB800. We enable early only Serial/SIO/RTC.
Everything else needs to be done by lpc.c Problem was that early settings survived, because the lpc.c is doing ORs only...
Hence we decode quite a lot and even strange ranges like IO port 0x4600 etc...

Also, if some port which does not fit to predefined set is requested, like 0x290 for Hardware monitor, the wide port is done, but in our case it has range 512 bytes which means we decode in fact 0x290 - 0x490. And if we hit GPU in the 0x3bx range I receive MCE exception if I do isadump -f 0x300 which is bad.
Therefore If I detect that the requested range is small (16 bytes) I additionally set the small wide io region so only 16 bytes is decoded.

While at it, I fix spelling typos and I init the regs so we don't write random garbage to regs even if we don't enable them later.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz> 
Acked-by: Marc Jones <marcj303@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6343 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-12 16:24:48 +00:00
Scott Duplichan daecb1888e According to AMD documentation, cache type WP should be used for
execution from flash memory. Coreboot uses WB. While there is no
noticeable performance difference between the two settings, use
of WB can cause a problem for a jtag debugger. The attached
patch changes AMD cache as ram setting for flash execution from
WB to WP.

Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Marc Jones <marcj303@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6342 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-10 20:49:56 +00:00
Josef Kellermannseppk 20ecc5af40 RS690: Provide support for MMCONF.
If enabled, set up 0xe0000000..0xf0000000 as MMCONF
area. Must still be configured in per-board ACPI for
the OS to pick it up, so it's disabled by default.

Signed-off-by: Josef Kellermann<seppk@arcor.de>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-10 08:49:57 +00:00
Alexandru Gagniuc 1df854248b Implemented workaround for erratum 169, obsoleting erratum 131.
Workaround for 131 removed.
Changed workaround for erratum 110 to only include pre-revision-F
processors.

For details, check AMD publications:
#25759 (Errata for Fam F pre-revision F processors)
#33610 (Errata for Fam F revision F and later processor)

Based on work and previous patches by:
Rudolf Marek <r.marek@assembler.cz> 
Josef Kellermann <seppk@arcor.de>

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6340 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-10 07:51:51 +00:00
Josef Kellermann 31e0deac0e Fix a potential system hang by handling AMD Model F Erratum 89
a bit later.

Signed-off-by: Josef Kellermann <seppk@arcor.de>
Acked-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6339 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-10 07:48:07 +00:00
jakllsch b0c94a1866 Add NetBSD support to nvramtool.
Signed-off-by: <jakllsch@kollasch.net>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6338 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-08 16:07:49 +00:00
Patrick Georgi 167b792327 Fix cmos-files-y for relative paths
Thanks to Josef Kellermann <seppk@arcor.de> for reporting the issue.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6337 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-08 08:37:47 +00:00
Alexandru Gagniuc 4a038ca112 Place the W83627EHG MIDI base address mask in the correct position.
Corrects "index 98 has no mask" error at runtime.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Jonathan Kollasch <jakllsch@kollasch.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6336 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-08 02:36:39 +00:00
Peter Stuge b1d1c4d084 Reliably build arbitrary Kconfig-based revisions of SeaBIOS
Reliability is accomplished by checking out the desired SeaBIOS commitish
into a branch named 'coreboot' in the local SeaBIOS git repository. Using
a branch allows TAG-$(CONFIG_SEABIOS_..) to refer to any commitish in the
SeaBIOS git repo, not just branches and tags.

Configuration is done with make defconfig followed by enabling and
disabling of the relevant coreboot-specific SeaBIOS options by appending
to .config using echo. This works, because later entries in .config will
overwrite earlier ones.

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6335 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-07 20:16:40 +00:00