If a port disconnects after a reset we should abort any initialization
on the port. This might mean the device has re-enumerated as a 3.0 device
so the hub should be scanned again.
BUG=b:76831439
TEST=Verified USB-C devices that get detected correctly in depthcharge.
Change-Id: Iad899544684312df1bef08d69b5c7f41eac3a21c
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Each HART of a SoC like fu540 supports a different ISA. In order for the
coreboot's code can run on each core, need to modify the compile options.
So add this code.
Change-Id: Ie33edc175e612846d4a74f3cbf7520d4145cb68b
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/27442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Add comments on the ops handling in pnp_enable_devices function and the
pnp_info struct.
Also remove the negation in the check if an LDN-specific override is used.
This patch doesn't change the logic though.
Change-Id: I3e80dbce1f29ee3e95e3b1d71c9b8479561d5c1a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
* Move vboot/tpm specific implementation to vboot.
* Only call functions if CONFIG_FSP2_0_USES_TPM_MRC_HASH is set.
* Preparation for software hash function support, no logic changed.
Change-Id: I41a458186c7981adaf3fea8974adec2ca8668f14
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/24904
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make it obvious that the command has failed.
BUG=b:76831439
TEST=Verified on grunt
Change-Id: Ifa0b2fb087f5f0a36ba017a774fc98b33ab035a4
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
xhci_rh_port_speed return -1 if the port is disabled. The usb_speed enum
is unsigned so this results in a positive value which implies success.
Adding a -1 to the enum will make it signed so the >= 0 check will work
correctly.
BUG=b:76831439
TEST=verified on grunt that -1 is returned when port is disabled.
Change-Id: I98a373717d52dfb6ca4dcc53a00dc1b4c240a919
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Extracted from the stock UEFI using UEFItool & intelvbttool.
Without it, the kernel complains about the missing VBT table.
Additionally, the invalid oprom signature warning given by i915
is also gone.
Change-Id: I1871eca9e9c21531d842289f6624ec44420d9844
Signed-off-by: Pablo Moyano <42.pablo.ms@gmail.com>
Reviewed-on: https://review.coreboot.org/27482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Because earlier versions of debian set /dev as a standard tmpfs
filesystem, that was a simple place to build. Now, this has been
changed and /dev isn't a standard tmpfs that will grow to 50% of
memory. It's a fixed, very small size, and can no longer even be
resized.
Because of this, create a new directory to build in and add it to
/etc/fstab. Mount it when the container is started.
As long as we're at it, make the other build directories (ccache
and slave-root/workspace) tmpfs as well. The builders we're using now
have plenty of memory, so don't write any of the files to disk.
Update the Makefile to get rid of all references to ccache directory.
Change-Id: I21fd2c4395d7ffb9428172f035991338658cd907
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fix an undefined reference error with GCC 8.1
/cb-
build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk
/libbdk-dram/bdk-dram-size.o: In function `bdk_dram_get_size_mbytes':
/home/coreboot/slave-root/workspace/Testing_coreboot/src/vendorcode/cavium/bdk
/libbdk-dram/bdk-dram-size.c:198: undefined reference to `bdk_pop'
/cb-
build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk
/libbdk-dram/bdk-dram-test.o: In function `bdk_get_num_cores':
/home/coreboot/slave-
root/workspace/Testing_coreboot/src/vendorcode/cavium/include/bdk/libbdk-hal
/bdk-utils.h:164: undefined reference to `bdk_dpop'
/cb-
build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk/libdram
/dram-init-ddr3.o: In function `init_octeon3_ddr3_interface':
/home/coreboot/slave-
root/workspace/Testing_coreboot/src/vendorcode/cavium/bdk/libdram/dram-init-
ddr3.c:7550: undefined reference to `bdk_pop'
/cb-
build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk/libdram
/dram-l2c.o: In function `bdk_get_num_cores':
/home/coreboot/slave-
root/workspace/Testing_coreboot/src/vendorcode/cavium/include/bdk/libbdk-hal
/bdk-utils.h:164: undefined reference to `bdk_dpop'
make[1]: *** [src/arch/arm64/Makefile.inc:119: /cb-
build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/cbfs/fallback/romstage.debug]
Error 1
Change-Id: Ifcde5476c6f347c0eac7ca44bac88d3fa4017fb7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Prevent a reboot loop due to slow PCIe init.
Poke the watchdog a few times.
Change-Id: I03739d7dbad3072ccf77364fa4caba42c66ac643
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27455
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Swap 100Mhz and 156Mhz reference clock.
Correct values are taken from __bdk_qlm_sff81xx_set_reference().
Tested on Cavium's cn8100_sff_evb.
Change-Id: I312ce7379b361594249f9f26f4e561ebf57347df
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27454
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The BDK config subsystem can't store values in romstage.
Read frequency from DDR memory controller instead from
BDK config.
Fixes memory info showing always 0 MT/s.
Change-Id: Iaee33e57e27ca182f41be923cf950868f66d3638
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27451
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Keep the backlight off until it is needed.
BUG=b:72694972
TEST=Backlight turns on at ChromeOS splash screen, not prior.
Change-Id: Ia1aba787734e2976146ecd305dd821f0b326f0db
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/27489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Enable the backlight in the OS callback to SMI for APMC. This keeps
the backlight off until the OS is ready to display something.
BUG=b:72694972
TEST=Backlight turns on at ChromeOS splash screen
Change-Id: Idf32b1a3d45971883571a829a5c0c1f8563bb1f7
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/27487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Add the mainboard resume function and __weak variant override.
Change-Id: I808734208bd1ce81428771ea203709b53db56cd3
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/27486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This updates the IDPROM region along with the unused regions.
Change-Id: If73bb8162d3d0733e3bd8561cd5549f2184db2be
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/27505
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIO functions are required by the Grunt SMI handler.
Change-Id: Id729139b02c10bdd922b3df298f8f9feb1aff745
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/27485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The gpio_set function was not writing the correct GPIO register
address.
Change-Id: Ib306773ac72505977b606836bbaf3e2067324894
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/27484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Move the EC under the LPC PCI device to make sure that the SSDT path
matches the DSDT. Matches the behaviour of all other Lenovo devices.
Change-Id: I9ded7f639866d71d39ea0d5d0c36602d386c177f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Matthias Gazzari <mail@qtux.eu>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This makes it easier to know what offset each register references.
BUG=b:76831439
TEST=none
Change-Id: I92dcbd463ceb4dd8edbbd97b51a4e9aa32a983a6
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
there are 3 thermal sensors and index is:
0: 1 Charger
1: 1 SOC
2: 0 CPU
it needs to adjust sensor to index 2 to have correct
CPU temperature.
BUG=b:111284412
BRANCH=master
TEST=emerge-grunt coreboot
Change-Id: I27afb6c5b64b0c39d6db15e6c61ea16a1fda1ca3
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/27469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
This device claims to run at 75MHz with dual read, but it is not always
reliable. Add an option to change the SPI flash speed to 16MHz, to avoid
any problems.
BUG=b:111363976
TEST=manually try to get my em100 running (it doesn't yet)
Change-Id: I78d3d32c467aac82c72d31c773bfb0f69808aed4
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/27466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This applied to AMD devices as well as Intel, although the mechanism is
different. Move the option to a common place.
BUG=b:111363976
TEST=USE=em100-mode emerge-reef coreboot
See that a message appears:
* Enabling em100 mode (slow SPI flash)
Change-Id: Iea437bdf42e7bc49b1d28c812bfc6128e3eb68bd
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/27467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Add new Pantheon sku-id for loading vbt-pantheon.bin
BUG=b:78663963
BRANCH=firmware-nami-10775.B
TEST=Boots to OS and display comes up.
Check the board specific vbt binary loaded.
Change-Id: I1ee156372754ac0e77caae5959a9ca9884de95f4
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27432
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In case multiple FMAP regions are specified, print the FMAP name.
Useful if VBOOT is enabled and multiple CBFS are printed.
Change-Id: Id6f29ebeda8a9bde6dfe39362e0f2a5e33c86b26
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26862
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To comply with all relevant bodies throughout the world, SAR settings
take into account the lowest common denominator Tx power settings. This
setup may lead to non-optimal performance when the user location is in a
country that may allow higher power setting. The purpose of Wireless Geo
Delta Settings (WGDS) is to provide offset settings for FCC, Europe,
Japan and Rest of the world. These offsets would be added (by Intel wifi
driver) to the base SAR Tx Power as defined in WRDS and EWRD
BUG=b:65155728
BRANCH=none
TEST=WGDS ACPI table gets created as expected.
Change-Id: I4f602e3f95ff3545db6cc6e428beb9a36abd9296
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/21098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The FCAM_PWR_EN gpio should be GPP_B4 according to the latest board
schematics.
Change-Id: Id926bd224b3392d8a61b6d8ae0509053afaa5b9e
Signed-off-by: Ricky Liang <jcliang@chromium.org>
Reviewed-on: https://review.coreboot.org/27433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tomasz Figa <tfiga@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Cast to u64 to prevent possible integer overflow.
Change-Id: I5c7d25278db54523242314cba6c85ac2f7a6c1f3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Fix a typo.
Only memcpy into target buffer if pointer is not NULL.
Change-Id: I1aa4b2ce1843e53ab6ed2224eaa928fc79ea3b83
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Replicate directory layout from x86 for SMP.
Change-Id: I27aee55f24d96ba9e7d8f2e6653f6c9c5e85c66a
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/27355
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently thermal event support can not be disabled at board level.
Define and dependent code are placed in same file.
Move define of HAVE_THERM_EVENT_HANDLER to mainboard file.
Change-Id: Icb532e5bc7fd171ee2921f9a4b9b2150ba9f05c5
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/27415
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enabling of TBMC device on AP side requires corresponding support on the
EC side as well. Since not all octopus variants have tablet mode support
enabled, this change enables TBMC device only for phaser.
BUG=b:111264961
Change-Id: I1ce181baa8ebaff0a9d767e97ddc256eef9789e8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Jett Rink <jettrink@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Remove "IshEnable" from soc_intel_skylake_config since it's not
used anymore.
Enable/disable ISH by checking if ISH device is turned on or not.
Refer to https://review.coreboot.org/#/c/coreboot/+/26485/.
BUG=b:79244403
BRANCH=none
TEST=Built.
Change-Id: I4d2889af118659852431c87cb516fd19b577efc5
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://review.coreboot.org/26521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
To enable ISH device on atlas board, change "device pci 13.0 off end" to
"device pci 13.0 on end" in file
mainboard/google/poppy/variants/atlas/devicetree.cb. "IshEnable" is
not needed.
Config atlas board specific ISH setting in devicetree.cb.
Dynamically load gpio setting for ISH enabled/disabled cases.
BUG=b:79244403
BRANCH=none
TEST=Verified on Atlas board with ISH rework. ISH log showed on console.
Change-Id: I8269a85cd2ab7917bfc0e7d63d988e0e678d0bf2
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://review.coreboot.org/26486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Raul E Rangel