Initial support for Portwell PQ7-M107 (Q7) module.
Code based on Intel Strago mainboard.
BUG=N/A
TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107
Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Move the SMM lock outside the function as it is renamed.
Replace conditional !PARALLEL_MP with SMM_ASEG to better
reflect the use.
Change-Id: I93bf0d2f711f94a5bb741bdcd92c1e0fec228684
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The code should probably set SCI routing if built
with HAVE_SMI_HANDLER=n.
Change-Id: I0ada4b2a16490a15d8036a9425c4f768f7b8f218
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Currently, bluetooth FW is not loaded after a reboot. In order to do
this, we have to disable the bluetooth disable gpio (GPP_C14) in
bootblock and re-enable it in ramstage.
BUG=b:137307516
BRANCH=None
TEST=boot up Hatch device and make sure (in dmesg) that proper
bluetooth FW in loaded
Change-Id: Ic5e447d9de57790f7a100e9e03f36b047c19d8f9
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34354
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIOs related to power sequnce are
GPIO_67 - EN_PP3300
GPIO_117 - FULL_CARD_POWER_ON_OFF
GPIO_161 - PLT_RST_LTE_L
1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161
2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67
3. Power reset:
- keep GPIO_67 and GPIO_117 high and
- pull down GPIO_161 for 30ms then release it.
BUG=b:137033609
BRANCH=octopus
TEST=build image and verify on the DUT with LTE DB.
Change-Id: I7bf6fee087c885c22363b44aa98aa61f91be90b4
Signed-off-by: Marco Chen <marcochen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
These configuration files can be used to build Kodama firmware.
BUG=b:135490566
TEST=check variant: kodama via make menuconfig; make -j
Change-Id: I72e80e800ba041df1dda2b0f84470d1ef58bc946
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33616
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are two hard things in computer science: cache invalidation,
naming things, and off-by-one errors. -- Anonymous
var_num records the number of initialized entries in the reg_var array.
However, this means the index of the last initialized element is one
less than the value of var_num, so we need to take that into account
when indexing into the array. This has already been fixed in several
other places (eg. sb/amd/pi/hudson/lpc.c), so let's also do so here.
Change-Id: Ibefabaca42866a3f2b22eff979c73badf86ac317
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
512 bytes is much too big for this buffer, which only needs to hold a
path that will have a length of at most 20. The large buffer size also
triggers a -Wformat-truncation warning with GCC since it is later
printed into the smaller temp_string array, so shrink it down to
something reasonable.
Change-Id: I6a136d1a739c782b368d5035db9bc25cf5b9599b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The FSP_CAR option has additional configuration options whose default
values result in boot failures. Since default values should always boot,
default to the open-source CAR NEM Enhanced implementation instead. This
also allows us to get rid of an unnecessary vendor-specific special case.
Change-Id: I30b1808f91701c07dce6f1de08c213150e8a675a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34287
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make the title for lesson 1 match the format used for lesson 2 and the
lessons index, for consistency purposes.
Change-Id: I133d758ddf4974096cbf9f10ae96c148fc859efc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Set the controller state to D0 during the i2c init sequence, this ensures
the controller is up and active.
BUG=b:135941367
TEST=Verify no timeouts seen during I2C controller enumeration sequence
Change-Id: I247ede44b8d1d6871e3e813b63f99a7f6398dd72
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34273
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add function to set the power state of a LPSS controller.
The API implemented can be used to enforce controllers in
active state(D0) during initialization.
BUG=b:135941367
Change-Id: I7540924885350de64caff91d920d6cc234154616
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34272
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Elan's touchpad requires min 0.3us data hold time.
To fine tune the data hold time of i2c1 to meet
specification of Elan's touchpad.
BUG=None
BRANCH=None
TEST=Verified data hold time of i2c1 is around 320ns
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I0fa9db3b50e74f193261be96bd9e305bb19841e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Crews <ncrews@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
For AMD's Family17h processors, verstage needs to be run in the PSP,
before memory is initialized. This adds that binary into the PSP
directory.
See the Family17h documentation in the coreboot documentation directory
for more information.
BUG=b:137338769
TEST=Build, add test binary to mandolin board, boot
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I29002a1af51c59a2e6c715e15f3dc63e59cd5729
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
- Correct command line argument for microcode patches from -u to -O
- Add #if PSP_COMBO around new_combo_dir() as it's only called when
that's enabled.
- Remove unused variable in integrate_bios_firmwares()
- Correct enum type from amd_fw_type to amd_bios_type in
register_fw_addr()
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I51c6dbe700505bc2e32443000ae55cb644051e42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
As Intel doesn't even document known bugs add a list of
FSP bugs here.
Change-Id: I07819b83fb0c9437fc237472dfe943f78738347a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34239
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SOR_LINK_SPEED_G5_4 is unsupported, but it is not invalid, so it
suffices to return here instead of printing the next warning message.
Change-Id: Ifca3c52635e9a39af42e6616821d1099c43c237c
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1293137
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
last_unitid is immediately overwritten in the do loop, so this assignment
is not needed. This a relic from old code that commit 13f1c2af8b made
obsolete, but was never removed.
Change-Id: I2eecddd025f7a64b0a70fc07a61ebb43aba757d6
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The JUnit output from the libpayload builds was getting deleted by the
coreinfo build. Move the libpayload to later in the coreboot-gerrit
job.
Also add messages to stdout indicating the various libpayload configs
that are built and a message indicating when all libpayload builds are
complete.
BUG=b:137380189
TEST=Upload test commit that includes a libpayload compile error and
verify buildbot fails.
Change-Id: I43b55f402216582dcf81be34171437be345572ab
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34183
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
USB device id does not get included because of the logical OR operation.
Fix encoding the USB device path.
BUG=None
BRANCH=None
TEST=Boot to ChromeOS.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I79317da6d9c7cd177bd7bbbba1f1ccebe076930a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34245
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Mark Intel WiFi driver to depend on PCI and remove the dependency on x86
architecture.
BUG=None
BRANCH=None
TEST=Compile and Boot to ChromeOS.
Change-Id: I762007d53b43bbc78924ee8efe236d6a7ff4dc57
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33959
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add generic WiFi driver to support common device operations across
multiple types of WiFi controller.
BUG=None
BRANCH=None
TEST=Boot to ChromeOS. Ensure that the SSDT table contains SAR tables
and wakeup GPE information. Ensure that the SSDT table is same after the
change.
Change-Id: Ica5edf95a37c8ed60f7e159d94fd58af5d41c0ef
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Hatch and variants use GPP_A21 for trackpad IRQ and wake. Fix
overridetree.cb to advertise the right IRQ.
Change-Id: Ib87c858b89e8726c3bc80f83be0729ef4625268e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34248
Reviewed-by: Philip Chen <philipchen@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Bluebird needs to use different SAR values than Casta.
Bluebird sku id is 2.
CQ-DEPEND=CL:*1435310
BUG=b:129725065
BRANCH=octopus
TEST=build
Change-Id: I107a8519832fcf906b94f958a3dc508d19bb4727
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34080
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove implementation of 24 MHz clock, available only
on Haswell ULT SKUs. Use TSC_MONOTONIC_TIMER instead
for all boards.
Change-Id: Ic4aeb084d1b0913368f5eaa46e1bd68411435517
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
It doesn't make sense to print these values for memory-mapped UARTs.
Change-Id: Ie2d9cf95f0b0fdcf601e74de799b1390c08f2335
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
CB:32870 changed FIT loading code to make an FDT mandatory (because the
platforms that can use FIT images always need an FDT). Remove one
left-over conditional that is now dead code.
Found by Coverity.
Change-Id: Ia7765d45f068ab4bdc720ea7ae87dcc62a4b7d3d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
SMM_TSEG is a qualifier between TSEG and ASEG only, while
HAVE_SMI_HANDLER currently tells if SMM will be installed.
Move rest of the file under same 'if ELOG' block.
Change-Id: I620d3ce5aa9632d862d6480922144f002cf6423b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34195
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In our codebase, this is only coupled with intel/e7505.
The PCI registers reference here were for intel/i945.
Also aseg_smm_lock() was previously not called.
Change-Id: I21d991c8c2f5c2dde1f148fd80963e39d9836d3c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34149
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GRUB 2.04 was released on July 5th, 2019, so update. The only change-log
is the git history. Some coreboot related changes are listed below.
1. coreboot: Changed cbmemc to support updated console format from
coreboot.
2. ahci: Increase time-out from 10 s to 32 s
3. normal/menu: Do not treat error values as key presses
When building from the git repository, `./bootstrap.sh` needs to be run
to set up Gnulib. Ignore the exit code, as older versions might not have
this script.
Change-Id: Iab0b87164ed86f15d3415af935998b59e0d76c45
Signed-off-by: Pablo <42.pablo.ms@gmail.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
We got rid of the dangerous reconfiguration of arbitrary pads in
coreboot, but FSP still overrode that. Make sure that it doesn't
enable a UART for debug output when it isn't configured in core-
boot.
This, again, shows how dangerous it is to leave any FSP UPD at
its binary default.
Change-Id: I7280a80f71ddddbe78352eb696e6f5844d2df0b2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Frans Hendriks