Instead of performing the same tasks in the chipset code move
the common sequences into the FSP 2.0 driver. This handles the
S3 paths as well as saving and restoring the memory data. The
chipset code can always override the settings if needed.
BUG=chrome-os-partner:52679
Change-Id: I098bf95139a0360f028a50aa50d16d264bede386
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15739
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The amount of reserved memory just below the DRAM limit in
32-bit space is defined in the FSP 2.0 specification within
the FSPM_ARCH_UPD structure. There's no need to make the
chipset code set the same value as needed for coreboot.
The chipset code can always change the value if it needs
after the common setting being applied.
Remove the call in soc/intel/apollolake as it's no longer
needed.
BUG=chrome-os-partner:52679
Change-Id: I69a1fee7a7b53c109afd8ee0f03cb8506584d571
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15738
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The gcc compiler treats sizeof(void) == 1. Therefore requesting
a 1 byte reservation in cbmem and writing a pointer into the
buffer returned is wrong. Fix the size of the request to be
32-bits because FSP 2.0 is in 32-bit space by definition. Also,
since the access to the field happens across stage boundaries
it's important to ensure fixed widths are used in case a later
stage has a different pointer bit width.
BUG=chrome-os-partner:52679
Change-Id: Ib4efc7d5369d44a995318aac6c4a7cfdc73e4a8c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15737
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The cbmem string for 'AFTER CAR' didn't have the proper spacing
so when that entry is added to cbmem it results in a misaligned
log entry with the others.
Change-Id: If940e85b7dc5fb8372d7e2845270dadad67ab3a0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15735
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The Chrome OS options that will be shipped on this platform were
being set in the chromium repo with an external config file. Set
the options in the mainboard Kconfig file so there's no discrepancy
as to what will be used.
Change-Id: I05f0d1245611c16f54273728519a08e6edff3429
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15733
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Fix issue where zero-sized BIOS region could cause bitshift
for '-1' which is an unspecified behavior.
Change-Id: Icb62bf413a1a0d293657503ef21fe97b5f9a5484
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15727
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Fix and use the failsafe CAS detection logic rather than
recalulating the values from raw SPDs.
Tested on GA-G41M-ES2L with 2x2GB DDR2-800 DIMMs
(which worked before and still work)
Change-Id: I6af0f1705d099f7bcbff8c9baa94a68dae689e01
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/15726
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This function is unused since coreboot starts payloads in machine mode,
and it uses the obsolete eret instruction.
Change-Id: I98d7d0de5a3959821c21a0ba4319efb610fdefde
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15729
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Using the opcode directly is necessary for the transition to the GCC
6.1.0 based toolchain, because the old toolchain only supports eret and
the new toolchain only supports mret.
Change-Id: I17e14d4793ae5259f7ce3ce0211cbb27305506cc
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15290
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In order to save power in S3, we remove reset gpio setting in kernel.
We still need to initialize touchscreen ic.
Do it by pulling low reset gpio for 500us and then pulling high
in firmware.
BRANCH=none
BUG=chrome-os-partner:55170
TEST=build on elm.
Change-Id: Idbe0175a1fc1fa0b05e81706194c79d52c6101f6
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: f40cc9a22c2551c2c9455cb8b60f36353602bca6
Original-Change-Id: If2ac815c4fd5c5ae15443348a49eb31449b724b1
Original-Signed-off-by: YH Huang <yh.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/360312
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Johnny Chuang <johnny.chuang@emc.com.tw>
Reviewed-on: https://review.coreboot.org/15719
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Asserting this GPIO will send a signal to the EC to trigger a reset
for the AP and the CR50.
BRANCH=none
BUG=chrome-os-partner:55252
TEST=the device now reboots when it needs to switch between different
boot modes instead of hanging with "failed to reboot" message.
Change-Id: I8d168e313b6983c96c80f7ad6d70bb84c1ec1d9c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 83a4c8ff68ab24a103f2166e948eb23624ea97f7
Original-Change-Id: Idfd20977cf3682bd8933f89e8eec53005e55864e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/360238
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15718
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
In case of elog not being stored in CBMEM, calculate flash offset by
using rdev_mmap instead of assuming that the entire flash is mapped just
below 4GiB. This allows custom mappings of flash to correctly convert
the flash offset to mmap address.
BUG=chrome-os-partner:54186
TEST=Verified behavior on reef. mosys able to read out the elog correctly.
Change-Id: I3eacd2c9266ecc3da1bd45c86ff9d0e8153ca3f2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15722
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
F2950 SBC, also known as TONK 1201/TONK 1202, was originally
produced as a Centerm F2950 using DB800 reference design. Common
configuration does include a 600 MHz GeodeLX CPU underclocked to
500 or 400 MHz, 128 or 512 MiB of RAM in the single SODIMM slot and
128 or 512 MB IDE DOM. The board does have three USB 2.0 ports
(none of them possessing debug capabilities), PS/2, VGA, Geode
audio in/out and the serial port.
EEPROM needs to be soldered out and flashed externally at the time
of this message because flashrom would neither be able to dump BIOS
correctly while running vendor BIOS nor write flash contents.
All peripherals were tested against Linux 3.16 and seem to work
flawlessly. At the moment of this commit coreboot does not pass
PCI_COMMAND_IO from the configuration space to SeaBIOS, thereby
preventing VGA OPROM from being executed. This would be fixed in
the SeaBIOS itself or in a subsequent commit. As a workaround,
user may put VGA OPROM to vgaroms/seavgabios.bin in CBFS.
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Change-Id: I93f13ecb53bd05abc0e07e0bd7ba40e646dcb4c4
Reviewed-on: https://review.coreboot.org/15565
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The API called to write the name of the child table in the
dp entry (type ACPI_DP_TYPE_CHILD) was not including the
quotes, e.g., it was DAAD and not "DAAD". Thus, the kernel driver
did not get the right information from SSDT.
Change the API to acpigen_write_string() to fix the issue.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Change-Id: Id33ad29e637bf1fe6b02e8a4b0fd9e220e8984e7
Reviewed-on: https://review.coreboot.org/15724
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The binutils patch went in without updating the revision,
so we need to update it now. This was done in commit bcfa7ccb
(buildgcc: Update to binutils-2.26.1 & Fix aarch64 build issue)
Change-Id: Ifad4a2e3973f1f60d0ea840945e2bd097e1b4474
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15712
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch adds support to wake up from S3 on lidopen.
mainboard.asl has the _PRW defined for the wakeup support
in S3.
BUG = chrome-os-partner:53992
TEST = Platform wakes up from S3 on lidopen.
Change-Id: I48b456baf5f7e1c2f28454fa66bb90ad761bb103
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15618
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Since the Integrated Sensor Hub can be disabled through devicetree.cb
as a PCI device, there is no need for a separate register variable.
Remove handling the register and update mainboards' devicetrees. Also
keep ISH disabled on both Reef and Amenia.
Change-Id: I90dbf57b353ae1b80295ecf39877b10ed21de146
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15710
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
1. The hotplug feature needs to be disabled
so that pcie root ports will be disabled by fsp
2. Correct PcieRootPortEn mapping.
The correct mapping should be like below
PcieRootPortEn[0] ==> 00:14.0
PcieRootPortEn[1] ==> 00:14.1
PcieRootPortEn[2] ==> 00:13.0
PcieRootPortEn[3] ==> 00:13.1
PcieRootPortEn[4] ==> 00:13.2
PcieRootPortEn[5] ==> 00:13.3
BUG=chrome-os-partner:54288
BRANCH=None
TEST=Checked pcie root port is disabled properly
and make sure pcie ports are coalesced.
Also make sure the device will still be enabled after coalescence
when pcie on function 0 is disabled devicetree
Change-Id: I39c482a0c068ddc2cc573499480c3fe6a52dd5eb
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/15595
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch adds support to wake up from S3 on lidopen.
mainboard.asl has the _PRW defined for the wakeup support
in S3.
BUG = chrome-os-partner:53992
TEST = Reef board wakes up from S3 on lidopen.
Change-Id: Ic3bae26cea0642f98d938b3523d08f5902a1f4b5
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15643
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If S3 support was implemented for this platform later on, use
romstage handoff structure instead.
Change-Id: I03c1e07a7fcc17c27203d0c4e32e3958f2ba5273
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15716
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Damien Zammit <damien@zamaudio.com>
If S3 support was implemented for this platform later on, use
romstage handoff structure instead.
Change-Id: Ib0cf3ad41753baee26354c5ed19294048e7fb533
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15715
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Damien Zammit <damien@zamaudio.com>
The mainboards which use the Chrome EC duplicate the
same logic in the mainboard smi handler. Provide common
helper functions for those boards to utilize.
BUG=chrome-os-partner:54977
Change-Id: I0d3ad617d211ecbea302114b17ad700b935e24d5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15685
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Add a function to power off the system within the halt.h header.
BUG=chrome-os-partner:54977
Change-Id: I21ca9de38d4ca67c77272031cc20f3f1d015f8fa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15684
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Aaron Durbin