It is silly to have a single header to declare the main()
symbol, however some of the arches provided it while
lib/bootblock.c relied on the arch headers to declare it. Just
move the declaration into its own header file and utilize it.
Change-Id: I743b4c286956ae047c17fe46241b699feca73628
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13681
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
jmp_to_elf_entry() is not defined anywhere. Remove it.
Change-Id: I68f996a735f2ef3dd60cf69f9b72c3f1481cbb55
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13680
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since we're reaching the timestamp limit on certain platforms (both for
the pre-RAM cache and the final CBMEM region), this patch increases the
amount of space for both. In the pre-RAM case, it achieves this by
always utilizing the full size of the TIMESTAMP() region allocated in
memlayout.ld, rather than arbitrarily limiting it to some constant.
BRANCH=None
BUG=None
TEST=Booted Oak and confirmed that I can once again see all pre-RAM
timestamps after picking in the LZ4 patch series.
Change-Id: Iabb075a48d8d1e3e1811afeaad5ab47e7846c972
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13651
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Early UART driver is for bootblock and romstage. It is supposed to be used
when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits
in bootblock requiered for serial to be set up.
Change-Id: I15520d566f107797e68d618885d4379e73d0fa45
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13677
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is the minimum setup needed to both get cache-as-ram setup and a
C environment working. On apollolake, we only get 32 KiB of data
loaded into an SRAM that is readonly to the main CPU. Due to this
restriction we have to set CAR and a C environment very early on.
Change-Id: I65c51f972580609d2c1f03dfe2a86bc5d45d1e46
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13301
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Having a git module named "3rdparty" and another one in
"3rdparty/chrome-ec" led to git failures when the latter was initialized
before the former (because of git being stupid, but then it says so on
the box, right?)
Rename modules so there's no such hierarchy (3rdparty ->
3rdparty/blobs). While at it, also rename the culprit to match the path
name (3rdparty/chrome-ec to 3rdparty/chromeec).
git will resolve this on the next git submodule update invocation (eg.
the next coreboot build).
Change-Id: Ief79074d73abeefff36a47b2e58ac6b1c047e3a7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/13675
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Move submodule forward to a newer upstream master to fix the build on
paths containing "@", as can happen on jenkins.
Change-Id: Ie74012725c379909d5bf631f9cc9969106ca52b8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13673
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This is needed in a follow-on patch to enable udelay() handling on
apollolake, which is a dependency for the console code.
Change-Id: I7da6a060a91b83f3b32c5c5d269c102ce7ae3b8a
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/13302
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- Add the doimage sources in util/marvell
- Add dependency in root makefile
- Add dependency in makefile for armada38x soc
BUG=chrome-os-partner:47462
TEST=emerge-cyclone coreboot
BRANCH=tot
Change-Id: I81b30e0865cbd619a41659c3f2819ad3bafc5f24
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4b2a990150580e0b879a346ed8b71b3765b66bab
Original-Change-Id: I7e89b5e96206fde97ce69c296850122fd6c858f9
Original-Signed-off-by: Kefei Yao <kfyao@marvell.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/318046
Original-Commit-Ready: Kan Yan <kyan@google.com>
Original-Tested-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org>
Reviewed-on: https://review.coreboot.org/13137
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Currently x86s select BOOTBLOCK_CUSTOM by default. With this
change BOOTBLOCK_CUSTOM is selected only if C bootblock isn't.
Change-Id: I218f3b4044175b89697790c82c384b0f85a27ade
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13642
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Since cbmem is not initialized in bootblock, CAR_GLOBAL variables
can only be accessed directly similar to verstage.
Change-Id: Ifc705016290807c49dc8c49b581864cac2ad3f80
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13641
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Some platforms may want to use C code in bootblock so they need
writable memory and CAR can be used for it. This change reserves
memory in CAR that can be used by bootblock and other CAR stages.
Change-Id: I8dec768cf8763dbe235f0ba1339079ebc49cbd9a
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13640
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The previous usage of the intel microcode support supported using
the library under ROMCC and ramstage. Allow for microcode support
to be used in normal C-based romstage as well by:
1. Only using walkcbfs when ROMCC is defined.
2. Only using spinlocks if !__PRE_RAM__
The header file now unconditionally exposes the declarations
of the supporting functions.
Change-Id: I903578bcb4422b4c050903c53b60372b64b79af1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13611
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Add lint-stable script with just error checking
- Enable warnings in addition to errors in non-stable test.
- Use git grep if the code is in a git repo now that exclusions are
working.
- Check for perl, and ask the user to install it if it isn't
available.
Change-Id: Ie60d21f4ef8a61d879f116eb2056eb805b0a55f2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13542
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This symbol is not defined.
Change-Id: I2b0a3fca82d85962fc882f237b70702cab0400db
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/13647
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
We want the question for CBFS size to be next to the rom size in the
mainboard directory, but that doesn't seem to work for how people
want to set the defaults. Instead of having the list of exceptions
to the size, just set the defaults at the end of kconfig.
- Move the defaults for chipsets not setting HAVE_INTEL_FIRMWARE into
the chipset Kconfigs (gm45, nehalem, sandybridge, x4x)
- Override the default for HAVE_INTEL_FIRMWARE on skylake.
- Move the HAVE_INTEL_FIRMWARE default setting into the firmware
Kconfig file
- Move the location of the default CBFS_SIZE=ROM_SIZE to the end of
the top level kconfig file, while leaving the question where it is.
Test=rebuild Kconfig files before and after the change, verify that
they are how they were intended to be.
Note: the Skylake boards actually changed value, because they were
picking up the 0x100000 from HAVE_INTEL_FIRMWARE instead of the
0x200000 desired. This was due to the SOC_INTEL_SKYLAKE being after
the HAVE_INTEL_FIRMWARE default. Affected boards were:
Google chell, glados, & lars and Intel kunimitsu.
Change-Id: I2963a7a7eab037955558d401f5573533674a664f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13645
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The new option CONFIG_MRC_CACHE_FMAP will cause fastboot_cache.c to
look in the FMAP for a region named "RW_MRC_CACHE" and prevents adding
a CBFS file named "mrc.cache".
Tested on a fsp_baytail-based board.
Change-Id: I248f469c7e3447ac4ec7be32229fbb5584cfd2ed
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13632
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: York Yang <york.yang@intel.com>
veyron_speedy was deduplicated as sub-board into google/veyron, so the
addition of chromeos.fmd (identical btw) wasn't useful.
Change-Id: Ic4eb6f5fefb0812cae1b9c0475e3a296d7fa65b6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13646
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We tested for the presence of .git/modules/3rdparty, which always exists
now because of .git/modules/3rdparty/chrome-ec. Test for .../hooks
instead since that's the actual location for the later activities.
Change-Id: Id5de9f850413c2bc3525faa6cc549641304c3d47
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/13650
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Make the gcc build system create multiple libgcc.a instances for
different ABIs.
Change-Id: I1c888bf751bf43566da8927ed0aedb53857363bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13625
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The PSTATE mask bits for Debug exceptions, external Aborts, Interrupts
and Fast interrupts are usually best left unset: under normal
circumstances none of those exceptions should occur in firmware, and if
they do it's better to get a crash close to the code that caused it
(rather than much later when the kernel first unmasks them). For this
reason arm64_cpu_init unmasks them right after boot. However, the EL2
payload was still running with all mask bits set, which this patch
fixes.
BL31, on the other hand, explicitly wants to be entered with all masks
set (see calling convention in docs/firmware-design.md), which we had
previously not been doing. It doesn't seem to make a difference at the
moment, but since it's explicitly specified we should probably comply.
BRANCH=None
BUG=None
TEST=Booted Oak, confirmed with raw_read_daif() in payload that mask
bits are now cleared.
Change-Id: I04406da4c435ae7d44e2592c41f9807934bbc802
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6ba55bc23fbde962d91c87dc0f982437572a69a8
Original-Change-Id: Ic5fbdd4e1cd7933c8b0c7c5fe72eac2022c9553c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/325056
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13596
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On ARM64, the memory type for accessing page table descriptors during
address translation is governed by the Translation Control Register
(TCR). When the MMU code accesses the same descriptors to change page
mappings, it uses the standard memory type rules (defined by the page
table descriptor for the page that contains that table, or 'device' if
the MMU is off).
Accessing the same memory with different memory types can lead to all
kinds of fun and hard to debug effects. In particular, if the TCR says
"cacheable" and the page tables say "uncacheable", page table walks will
pull stale entries into the cache and later mmu_config_range() calls
will write directly to memory, bypassing those cache lines. This means
the translations will not get updated even after a TLB flush, and later
cache flushes/evictions may write the stale entries back to memory.
Since page table configuration is currently always done from SoC code,
we can't generally ensure that the TTB is always mapped as cacheable.
We can however save developers of future SoCs a lot of headaches and
time by spot checking the attributes when the MMU gets enabled, as this
patch does.
BRANCH=None
BUG=None
TEST=Booted Oak. Manually tested get_pte() with a few addresses.
Change-Id: I3afd29dece848c4b5f759ce2f00ca2b7433374da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f3947f4bb0abf4466006d5e3a962bbcb8919b12d
Original-Change-Id: I1008883e5ed4cc37d30cae5777a60287d3d01af0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323862
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13595
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Decode the CPU variants and display the CPU info.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Successful if Quark X1000 is displayed
Change-Id: I7234a6d81a48cdd02708b80663147e2b09ba979e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13605
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Optionally relocate FSP into DRAM and then call FSP SiliconInit.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Add "select DISPLAY_FSP_ENTRY_POINTS"
* Add "select DISPLAY_HOBS"
* Optionally add "select RELOCATE_FSP_INTO_DRAM"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* FSP entry points are displayed and
* The message "FspSiliconInit returned 0x00000000" is displayed and
* The HOBs are displayed correctly and
* The message "ERROR - Missing one or more required FSP HOBs!" is
not displayed
Change-Id: I91e660ea373a8bb00fc97fe8b760347cbfa96b1e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13631
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add the SoC specific routines to access the MTRR registers. These
registers exist in the host bridge and are not accessible via the
rdmsr/wrmsr instructions.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Add "select DISPLAY_MTRRS"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* The message "FSP TempRamInit successful" is displayed
Change-Id: I7c124145429ae1d1365a6222a68853edbef4ff69
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13530
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Baytrail FSP MR 005 adds two new fields:
AutoSelfRefreshEnable
APTaskTimeoutCnt
Add the device tree definitions.
Change-Id: I12e2a8b0b5cbeb6b7289cf91f65b25e73007a8de
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12973
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
Add a dummy fill_power_state routine so that execution is able to reach
FSP MemoryInit.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Add "select DISPLAY_HOBS"
* Add "select DISPLAY_UPD_DATA"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* MemoryInit returns 0 (success) and
* The the message "ERROR - Coreboot's requirements not met by FSP
binary!" is not displayed
Change-Id: I2a116e1e769ac09915638aa9e5d7c58a4aac3cce
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13447
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In the same time remove few native gfx options which were improperly set
and only added dead code to the binary.
Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13649
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
SeaBIOS only supports standard IO based serial ports. If the serial
port being used by coreboot isn't a standard IO serial port, disable
the serial console in the SeaBIOS build.
Change-Id: I386b46625fca0bd0a5416ed9831f8370c294ed74
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13617
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This fixes serial on rk3288.
Change-Id: I3dbf3cc165e516ed7b0132332624f882c0c9b27f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13636
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Change-Id: I084eb4694a2aa8f66afc1f3148480608ac3ff02b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13635
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
To be able to run this as a lint-stable test, demote these to warnings
for now. After the current CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
issues get fixed, these can be promoted again.
Change-Id: I1432980eb0c871fc61c12dcc351f8d46513a7965
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13541
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These files aren't updated (or updatable), and as such don't need to be
copied to the RW sections.
Change-Id: Ie78936792ad651fbf8500fc7e34f0899e33a904c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13633
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This looks at the coreboot codebase for the IS_ENABLED macro, and
gives an error if there is a symbol used without the CONFIG_ prefix.
This only works for symbols of type bool.
A future check will be added for all symbols, but that will take
a significant amount of time to run, because each symbol will need
to be searched for individually.
Change-Id: I92f2de2d231610d1a788da965f21966d89c2f25c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13538
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is needed for stout EC init.
Change-Id: I5c73499c17763229840152a473a2d820802ee2f6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13535
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
On certain Super I/O devices, when a PS/2 mouse is not present on the
auxiliary channel both channels will cease to function if the
auxiliary channel is probed while the primary channel is active.
Therefore, knowledge of mouse presence must be gathered by coreboot
during early boot, and used to enable or disable the auxiliary PS/2
port before control is passed to the operating system.
This is added in commit 448e3863 (drivers/pc80: Add PS/2 mouse
presence detect).
Update the Nuvoton NCT5572D driver to flag the auxiliary channel as
disabled if no device was detected. The code is copied from the Winbond
W83667HG-A driver.
Note, the ACPI changes are not part of this commit.
TEST=Currently, on the ASRock E350M1, PS/2 does not work. With this
change, a PS/2 keyboard works fine in SeaBIOS, GRUB in MBR, and Debian
GNU/Linux Sid/unstable with Linux 3.19.
```
[ 1.185195] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.189110] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.189133] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.189970] mousedev: PS/2 mouse device common for all mice
```
Change-Id: I7f9be348d295e70437bef089d4c2173169f38459
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/13618
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Move the payloads section of the kconfig tree out of the top level
kconfig file and into a separate Kconfig just for payloads before
it starts to get added to.
Change-Id: I4f52818f862bf1aeba538c1c6ed93211a78b9853
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13608
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For devices with Chrome EC, state the "board" name(s), so they're built
as part of the image.
A number of EC boards aren't supported in the Chrome EC master branch,
they're brought along but commented out, waiting for a port to master
in the Chrome EC code base.
Change-Id: Ic6ab821de55cf9b4e8b48fe5ebc603adeb8bb28b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13548
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This reverts commit 0e06f5bd70.
It breaks gm45 and also does some magic without being asked too. It
disables bridge devices permanently if no device was found on the se-
condary bus. In a simple notebook world this might be ok, but it breaks
hot-plugging and late detection (if a secondary bus device comes up too
slow for the firmware to detect and the OS has to enumerate it).
Change-Id: Ia2010640d7c55b0bdd44164b81c75dd4be50410b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/13609
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Otherwise it triggers a IASL warning with new IASL.
Change-Id: I090ee18df78ea779137ee6797c55b96ea27e6d27
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13623
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Vladimir Serbinenko