After the obsoletion of Processor() it is necessary to provide
_CST package to define P_LVLx IO addresses for C2/C3 transitions.
The latency values from _CST will always replace those in FADT.
Change-Id: I3230be719659fe9cdf9ed6ae73bc91b05093ab97
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Iabba97e003d1a5140c98e3fc5a3496f66f8795c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74528
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
srcclk_pin is 0-based and '0' is a valid clock source number. If
srcclk_pin is set to -1, then the clock will not be disabled in D3.
Therefore, clock source gating method should not be generated.
BUG=b:271003060
BRANCH=firmware-brya-14505.B
TEST=Boot to OS and check that rtd3 ACPI entries are generated as
expected. For those PCI devices with RTD3 driver whose srcclk_pin to
0, the RTD3 entries should not be missing due to check error.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ia831b8fd17572cc35765bd226d1db470f12ddd41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73889
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
This patch sends the CSE EOP command asynchronous implementation early
as part of `soc_init_pre_device`.
Without this patch the duration between asynchronous CSE EOP send and
receive commands is not ample which causes idle delay while waiting
for EOP response.
The goal of the CSE async implementation is to avoid idle delay while
capturing the response from CSE EOP cmd. This patch helps to create
ample duration between CSE EOP command being sent and response being
captured.
TEST=Able to boot google/rex sku to ChromeOS and observed ~100ms of
boot time savings (across warm and cold reset scenarios)
Change-Id: I91ed38edbd5a31d61d4888e1466169a3494d635a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Parts of this file were still a copy of the file from the Mendocino SoC,
so update the file to match the PPR #57019 Rev 3.03 and the chipset
devicetree of the Phoenix SoC. Phoenix has 4 GFX/GPP PCIe bridges/ports,
the numbering scheme of the GPP PCIe bridges/ports was changed so that
the numbers match the device and function numbers, and there are new
device functions for the IPU and the USB4 controller and router devices.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie9429c03839bb0199a04cd6cafe9a955ebdacc91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74565
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In both PPR #57019 Rev 3.03 and PPR #57396 Rev 3.04, the i2s_ac97
function on bus C isn't mentioned any more and the microarchitecture
specification document for this SoC also doesn't mention it, so remove
it from the devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibd115953bdd60e1dfcc79797b0c2158e5d861636
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74564
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5e067f6fb2bab66d9b2f6965636845dfd8b7cacd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Remove the `TcssD3ColdDisable` option in devicetree, as it exists
in Kconfig. The setting is currently unused.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I08930ef84438140a13df74900570b126088bd1cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74478
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove the `TcssD3ColdDisable` option in devicetree, as it exists
in Kconfig. The setting is currently unused.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2590e8dec0a308e0dc3d467cb3dd2bb97e877492
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74477
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove the `TcssD3ColdDisable` option in devicetree, as it exists
in Kconfig. The setting is only used on `starlabs/starbook` which
selects D3COLD_SUPPORT so the UPDs will not change.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I50e49e900c96748edd5b678765e47cc0e0d9b280
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74476
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use D3COLD_SUPPORT Kconfig option to set the maximum support sleep
state. Report `4` in `_S0W` only when D3COLD_SUPPORT is enabled, as
if it is not, it will break S3 exit.
When D3COLD_SUPPORT is not enabled, return `3` (D3Hot).
This fixed S3 exit on both TGL and ADL. Tested on StarBook
Mk V and Mk VI.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I578d4933b6144aec79fe0b2eb168338ef82c0b9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74406
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The Kconfig option SOC_INTEL_TIGERLAKE_S3 suggests that it's doing
something with S3, but it's actually disabling D3Cold support.
Remove it, and instead use D3COLD_SUPPORT so it's clear what the
option is doing.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id43f3e5c8620d474831cc02fcecebd8aac961687
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74405
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move D3COLD_SUPPORT to device, so it can be used by multiple
SOCs.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie92736458ab95374c51346107665dc0fd1e653a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74404
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Intel FSP used on ChromeOS platform has dropped the
`CpuFeaturesPei.ffs` module to opt for coreboot running this
additional feature programming on BSP and APs.
TEST=Able to build and boot google/rex without any boot regression.
Please refer to the boot time and SPI flash savings after dropping
the FSP feature programming:
Boot time savings=10ms
SPI Flash size savings=34KB
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iaed0a009813098610190b2a3a985b0748c0d51de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
CBFS library performs memory mapped access of the files during loading,
verification and de-compression. Even with MTRRs configured correctly,
first few file access through memory map are taking longer times to
load. Update the SPI DMA driver to load the files into CBFS cache, so
that they can be verified and de-compressed with less overhead. This
saves ~60 ms in boot time.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Observe ~60 ms improvement
with the boot time. Performing additional test to confirm there are no
regressions.
Before:
=======
970:loading FSP-M
15:starting LZMA decompress (ignore for x86) 760,906 (60,035)
16:finished LZMA decompress (ignore for x86) 798,787 (37,881)
8:starting to load ramstage
17:starting LZ4 decompress (ignore for x86) 1,050,093 (13,790)
18:finished LZ4 decompress (ignore for x86) 1,054,086 (3,993)
971:loading FSP-S
17:starting LZ4 decompress (ignore for x86) 1,067,778 (3,313)
18:finished LZ4 decompress (ignore for x86) 1,068,022 (244)
90:starting to load payload
17:starting LZ4 decompress (ignore for x86) 1,302,155 (11,285)
18:finished LZ4 decompress (ignore for x86) 1,303,938 (1,783)
After:
======
970:loading FSP-M
15:starting LZMA decompress (ignore for x86) 709,542 (12,178)
16:finished LZMA decompress (ignore for x86) 739,379 (29,837)
8:starting to load ramstage
17:starting LZ4 decompress (ignore for x86) 1,001,316 (12,368)
18:finished LZ4 decompress (ignore for x86) 1,001,971 (655)
971:loading FSP-S
17:starting LZ4 decompress (ignore for x86) 1,016,514 (3,031)
18:finished LZ4 decompress (ignore for x86) 1,016,722 (207)
90:starting to load payload
17:starting LZ4 decompress (ignore for x86) 1,244,602 (10,313)
18:finished LZ4 decompress (ignore for x86) 1,244,831 (228)
Change-Id: Ie30b6324f9977261c60e55ed509e979ef290f1f1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The Kconfig option SOC_INTEL_ALDERLAKE_S3 suggests that it's doing
something with S3, but it's actually disabling D3Cold support.
Rename it to D3COLD_SUPPORT to make it clear what it's doing.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ifc3f19912ac7ee55be8ec7a491598140f9532675
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Add function needed to generate ACPI backlight control SSDT, along with
Kconfig values for accessing the registers.
Tested by adding gfx register on google/magpie. Backlight controls
work on Windows 10 and Linux 6.1.
Change-Id: Iaa9872cd590c3b1298667cc80354ed3efd91c6c8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
The patch moves API that gets the CSE FW partition information into
CSE Lite specific file aka cse_lite.c because the consumer of this API
is the cse_lite specific ChromeOS devices hence, it's meaningful to
move the cse lite specific implementation inside cse_lite.c file.
BUG=b:273661726
TEST=Able to build and boot google/marasov with this code change.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I49ffaec467f6fb24327de3b2882e37bf31eeb7cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74382
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable early caching of the TOM region to optimize the boot time by
selecting `SOC_INTEL_COMMON_BASECODE_RAMTOP` config.
Purpose of this feature is to cache the TOM (with a fixed size of
16MB) for all consecutive boots even before calling into the FSP.
Otherwise, this range remains un-cached until postcar boot stage
updates the MTRR programming. FSP-M and late romstage uses this
uncached TOM range for various purposes (like relocating services
between SPI mapped cached memory to DRAM based uncache memory) hence
having the ability to cache this range beforehand would help to
optimize the boot time (more than 50ms as applicable).
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I3b68d13aa414e69c0a80122021e6755352db32fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73738
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable early caching of the TOM region to optimize the boot time by
selecting `SOC_INTEL_COMMON_BASECODE_RAMTOP` config.
Purpose of this feature is to cache the TOM (with a fixed size of
16MB) for all consecutive boots even before calling into the FSP.
Otherwise, this range remains un-cached until postcar boot stage
updates the MTRR programming. FSP-M and late romstage uses this
uncached TOM range for various purposes (like relocating services
between SPI mapped cached memory to DRAM based uncache memory) hence
having the ability to cache this range beforehand would help to
optimize the boot time (more than 50ms as applicable).
TEST=Able to build and boot Starlab ADL laptop to OS.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Iba554af4ff0896e133d20860ff72dd1a10ebd1e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73736
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
This patch adds CPU ID for B0 stepping (aka ES2).
DOC=#723567
TEST=Able to boot on B0 rvp and get correct CPU Name in coreboot log.
Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com>
Change-Id: I8b939ccc8b05e3648c55f8f2a0a391cb08f04184
Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74300
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Boards with SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID have
special handling for the time being.
Change of aopen/dxplplusu is coupled with sb/intel/i82801dx.
Change of emulation/qemu-i440fx is coupled with intel/i82371eb.
For asus/p2b, this adds MADT LAPIC entries, even though platform
has ACPI_NO_MADT selected. Even previously ACPI_NO_MADT creates
the MADT, including an entry for LAPIC address.
Change-Id: I1f8d7ee9891553742d73a92b55a87c04fa95a132
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This fixes the Jenkins build error when building INTEL_ARCHERCITY_CRB
that was caused by the API change in commit 36e6f9bc04. This patch removes the
broken API function and also adds package_id log print same as previous
commit mentioned above.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I89e14b40186007ab0290b24cd6bd58015be376b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74436
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
This patch avoids cannonlake base config to select eNEM for CAR by
default. Rather allow other SoC config to choose the applicable CAR
mode between eNEM and NEM.
CML and WHL select eNEM whereas CFL decided to use NEM for CAR setup.
Here is some background about why CFL SoC platform decided to choose
NEM over eNEM:
It was found that some coffeelake CPUs like Intel i3 9100E fail to enter
CAR mode because some MSR used by NEM enhanced are lacking. According to
the Intel SDM CPUID.EAX=07h.ECX=0 reg EBX[12 or 15] should indicate the
presence of IA32_PAR_ASSOC and CPUID.EAX=10h.ECX[1 or 2] reg ECX[2]
should indicate IA32_L3_QOS_CFG and IA32_L2_QOS_CFG respectively but
even on a Intel coffeelake CPU that works with the NEM_ENHANCED these
CPUID bits are all 0 so there is no way of knowing whether NEM_ENHANCED
will work at runtime. Instead just always use regular NEM.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibeaa4d53279ff9cbcd0b2ac5f2ad71925872355b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
To provide power to MIPI panel STA_HIMAX83102_J02, add support for
regulator VIO18.
BUG=b:272425116
TEST=test firmware display pass for STA_HIMAX83102_J02 on Starmie.
Change-Id: I3c3aa105e648b87fc39f881d762002f67b4422b5
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74341
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Currently the xeon_sp code reassigns struct devices apic_id so that srat
entries can be added in a certain order.
This is not a good idea as it breaks thread local storage which contains
a pointer to its struct device cpu.
This moves the sorting of the lapic_ids to the srat table generation
and adds the numa node id in each core init entry. Now it is done in
parallel too as a bonus.
Change-Id: I372bcea1932d28e9bf712cc712f19a76fe3199b1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68912
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Avoid asserts related to CNVi UPDs which are not boot critical.
Instead, add error messages which are more helpful in identifying
the issue.
BUG=none
TEST=Boot to the OS on google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I49a988b7eda009456d438ba7be0d2918826e1c36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74370
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The reference to a constant FCH IOAPIC interrupt count used
with GNB IOAPIC was a bit obscure.
Change-Id: I2d862e37424f9fea7f269cd09e9e90056531b643
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch retrieves details of a specified firmware partition table.
The information retrieved includes the current firmware version and
other information about the firmware partition. The patch communicates
with the ME using the HECI command to acquire this information.
BUG=b:273661726
Test=Verified the changes for ISH partition on nissa board.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I0582010bbb836bd4734f843a8c74dee49d203fd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Hook the newly created/exposed CnviWifiCore UPD up as a chip driver.
Enable this option by default to maintain the existing behavior.
BUG=b:270985197
TEST=Verified by enabling/disabling the UPD on google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5b4662c2a064f7c9074797c8a2541dcf1dd686fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74306
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch updates total cpu count variable and total P-core count in
cpu_apic_info_type structure to `unsigned short int` to address more
cores.
TEST=Verify the build on Rex
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I46239cc7ad9870e7134955af56b9f6625be2b002
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Processor attached memory should not use reserved_ram_from_to and
treat the calculation of gi_mem_size size as 64MB.
By default SOC_INTEL_HAS_CXL is enabled for Sapphire Rapids platforms,
this should fix small total memory issue. Before the fix running
command 'free -g -h' under Linux shows the total memory is only 1.4Gi,
after the fix it's showing the expected total memory size 15Gi.
Tested=On AC without attaching CXL memory, the total memory size is
the same as de-selecting SOC_INTEL_HAS_CXL.
On OCP Crater Lake with CXL memory attached, CXL memory can be recognized
in NUMA node 1:
numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3 4 5 6 .. 59
node 0 size: 95854 MB
node 0 free: 93860 MB
node 1 cpus:
node 1 size: 63488 MB
node 1 free: 63488 MB
node distances:
node 0 1
0: 10 14
1: 14 10
Change-Id: I38e9d138fd284620ac616a65f444e943f1774869
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74296
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Use the common acpi_fill_root_complex_tom function instead of the SoC-
level northbridge_fill_ssdt_generator function that does basically the
same.
TEST=Resulting coreboot SSDT remains unchanged on Careena.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie0f100e0766ce0f826daceba7dbec1fb88492938
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
The Kconfig is only used in common code to gather the build time
maximum socket number FSP support. The same information is available
in FSP header as MAX_SOCKET, thus use the FSP as truth of source.
Currently MAX_SOCKET is 4.
Change-Id: I10282c79dbf5d612c37b7e45b900af105bb83c36
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74339
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Set the P2SB device as hidden as FSP-S is hiding the PCI configuration
space from coreboot on Alder Lake systems.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5cfde7c1f6791578a03d73e89bcde31af608f12d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
P2SB device is being hidden from coreboot by FSP-S. This breaks the
resource allocator which does not report P2SB BAR via intel common
block P2SB driver. Hook up the common block P2SB driver ops to
soc_enable function so that the resources will be reported. The P2SB
device must be set as hidden in the devicetree.
This fixes the silent resource allocation conflicts on machines with
devices having big BARs which accidentally overlapped P2SB BAR.
TEST=Boot MSI PRO Z690-A with multiple PCIe devices/dGPUs with big
BARs and see resource conflicts no longer occur.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I7c59441268676a8aab075abbc036e651b9426057
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Printing the value of a variable is not informative for a normal user,
so decrease the value from BIOS_INFO to BIOS_DEBUG.
Fixes: b9caac74a3 ("soc/amd/mendocino: Reinterpret smu_power_and_thm_limit")
Change-Id: I22f6293fd47633dfdbdae37b7257f47a5a4bb29c
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Fix a couple of bugs in the _OSC method for handling
"PCI Host Bridge Device" on Xeon-SP.
- Drop the Sleep. The code doesn't write to hardware at all, so
there's no need to sleep here.
- Make sure that the number of DWORD passed in Arg2 is at least 3.
The existing check was useless as it would not create the
DWordField, but then use it anyways.
- Add check for CXL 2 device method calls which provide a 5 DWORD
long buffer to prevent buffer overflows when invoking the
"PCI Host Bridge Device" method.
Test:
Boot on Archer City and confirm that no ACPI errors are reported
for _OSC.
Change-Id: Ide598e386c30ced24e4f96c37f2b4a609ac33441
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
According to ADL PCH BIOS specification (DOC# 630603) ADL-S PCH
uses a fixed SBREG_BAR of 256MiB starting at 0xe0000000.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ied59a6dad8fb065dc3aeb6281bd32074aaa5e3b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Now the CPU topology is filled in struct device during mp_init.
Change-Id: I7322b43f5b95dda5fbe81e7427f5269c9d6f8755
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
