* Don't implicitly add __PRE_RAM__ in romcc.
Fixes intel/xe7501devkit
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4998 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
which is normally set to 0x10 (the current default) and set to 0x80 (the current alternative)
where necessary (if romstraps get in the way).
For Kconfig, the special case is set per southbridge (as these define the necessity for this
workaround), for newconfig it's added to each single board.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Usually, this means adding values to Kconfig, but in a few cases, adding values
to newconfig, too (which doesn't hurt).
Also really hook up tyan/s2850 and tyan/s2875 to kconfig, and have them still
build.
Trivial and stupid kconfig changes, just lots of them.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4959 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
now handled more generically using CBFS.
Simplify the option ROM code in device/pci_rom.c, since there are only two ways
to get a ROM address now (CBFS and the device) and add an exception for qemu.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4925 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Since we have CBFS setting rom_address in board files is no longer
necessary.
Also, drop vga_rom_address from RS690 completely, it was never used
in the code.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4923 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
__ROMCC__ now means "Don't use prototypes, since romcc doesn't support them."
__PRE_RAM__ means "Use simpler versions of functions, and no device tree."
There are probably some places where both are tested, but only one is needed.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4921 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Of course, the user can still override those defaults, if needed.
Add defaults for VIA pc2500e, Kontron 986LCD-M/mITX, MSI MS-6178.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4891 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Make more boards use both of them.
Trivial.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4868 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
VIDEO_MB is a variable that defines how many MB of RAM will be used
for onboard graphics frame buffer. It's northbridge-dependent which
values for CONFIG_MB are valid (but not board-dependent).
This patch adds choices for menuconfig to select the VIDEO_MB value for:
- Intel 82810
- Intel 82830
- VIA CN400
- VIA CN700
Note: CN400 and CN700 are based on the CX700 datasheet, not sure if they're
correct. If somebody has CN400 and CN700 datasheets, please verify.
We drop all per-board VIDEO_MB variables in per-board Kconfig files as
there's a northbridge-specific option/default now (plus the user can override
the value if needed in menuconfig).
As CONFIG_MB is chipset-specific but not board-specific (and never was), filter
it in util/compareboard/compareboard, we don't need to match those values.
Finally, put "CPU", "Northbridge", "Southbridge", "Super I/O", and
"Devices" sections into the "Chipset" menu, where NB-specific
options will appear if you select a board using a certain NB,
SB-specific options would appear in the "Southbridge" section etc.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4866 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Do kbuildall then grep not.defined kbuildall.results/*
The interesting ones were GENERATE_* I had to put them in twice to make it work
correctly: once outside the menu setting the defaults, and once inside the menu.
Now they show up when they should, and are always defined
Define HAVE_INIT_TIMER to only exclude the three boards that define it to be 0
in newconfig.
Define MEM_TRAIN_SEQ to be an integer and set it correctly.
Remove CAR_FAM10 and just depend on NORTHBRIDGE_AMD_AMDFAM10
MOVNTI is a performance enhancement, and should default to 0 so it doesn't break
boards that forget to define it.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4856 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
RAM is initialized, and no one does it. Trivial.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4830 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
selected in sockets, and they aren't used yet.
Add a couple of variables to src/Kconfig for lack of a better place so that
their selects work.
Add select statements according to newconfig for some variables that were
defined but never selected in mainboard configs.
Fix #if CONFIG_VGA==1 -> #if CONFIG_VGA.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4816 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
with the respective board.
Of course, the user can still override the size in menuconfig.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4790 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to build, but by default all the tables that are available are built.
Make PIRQ table build for qemu.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
and PIRQ tables were actually wrong, I cannot imagine they ever
worked properly.
- Use CONFIG_IRQ_TABLE_COUNT in all irq_tables.c files instead of
hard-coded numbers.
- Make all CONFIG_IRQ_TABLE_COUNT values in irq_tables.c match Options.lb.
- Make all CONFIG_IRQ_TABLE_COUNT values match the actual number of entries
in the irq_tables.c file.
- Set all CONFIG_IRQ_SLOT_COUNT values in src/.../Options.lb for those
boards where they were set to 0 (in order to be overridden in
the respective targets/.../Config.lb).
This is mainly done to aid Patrick's scripts for kconfig conversion.
- Fix a number of comments in irq_tables.c files.
- Drop CONFIG_IRQ_SLOT_COUNT usage from boards that don't have irq_tables.c:
- tyan/s1846
- asus/a8v-e_se
- asus/m2v-mx_se
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4739 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4737 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, drop per-board CONSOLE_VGA/PCI_ROM_RUN while I'm at it, they're
global options in kconfig.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4735 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
select UDELAY_TSC
select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
for all 440BX and i810 boards as per Options.lb.
The UDELAY_IO / TSC / LAPIC / HPET setup will probably be checked
and improved later when the kconfig transition is done. For now
we keep the same values as in Options.lb.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4729 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
should not be set in per-mainboard Kconfigs.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4722 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
in very early stages, otherwise the boot may hang like this because
the CBFS headers cannot be found/accessed:
Uncompressing coreboot to RAM.
Jumping to image.
Check CBFS header at fffedfe0
magic is ffffffff
ERROR: No valid CBFS header found!
CBFS: Could not find file fallback/coreboot_ram
Jumping to image.
This patch enables full ROM access on all 440BX boards right after the
serial init (and before CBFS headers are parsed).
Build-tested and runtime-tested on ASUS P2B-F.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4721 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Both were only really used in pre-cbfs, as the payload's size isn't
relevant for the build process anymore.
Various calculations in {no,}failovercalculation.lb are adapted
accordingly.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- CONFIG_CBFS
- anything that's conditional on CONFIG_CBFS == 0
- files that were only included for CONFIG_CBFS == 0
In particular:
- elfboot
- stream boot code
- mini-filo and filesystems (depends on stream boot code)
After this commit, there is no way to build an image that is not using
CBFS anymore.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4712 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
per discussion on the mailing list.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4711 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It's only three files. Also fix up all the paths (Gotta love included C files)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4661 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4613 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This includes:
soyo/sy-6ba-plus-iii
a-trend/atc-6240
a-trend/atc-6220
gigabyte/ga-6bxc
biostar/m6tba
azza/pt-6ibd
tyan/s1846
abit/be6-ii_v2_0
compaq/deskpro_en_sff_p600msi/ms6119
msi/ms6147
asus/p2b
asus/p2b-d
asus/p2b-ds
asus/p3b-f
The Makefile.inc for all of them are _exactly_ the same, so I made a common
src/mainboard/Makefile.romccboard.inc (maybe needs a nicer name). I also suspect
that many other romcc-based boards will be able to re-use this Makefile.inc.
Apart from the board name, most boards only differ in the Super I/O that's
being used and the IRQ_SLOT_COUNT value. The Tyan S1846 is a bit different
as it doesn't have an irq_tables.c.
I also dropped the broken MS-6178 kconfig stuff for now, I'll submit a
proper config in another patch.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4587 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Whitespace fixes, remove trailing whitespace, use TABs for identation
(except in Kconfig "help" lines, which start with one TAB and two spaces
as per Linux kernel style)
- Kconfig: Standardize on 'bool' (not 'boolean').
- s/lar/cbfs/ in one Kconfig help string.
- Reword various Kconfig menu entries for a more usable and consistent menu.
- Fix incorrect comment of NO_RUN in devices/Kconfig.
- superio/serverengines/Kconfig: Incorrect config name.
- superio/Makefile.inc: s/serverengine/serverengines/.
- superio/intel/Kconfig: s/SUPERIO_FINTEK_I3100/SUPERIO_INTEL_I3100/.
- mainboard/via/vt8454c/Kconfig: Fix copy-paste error in help string.
- mainboard/via/epia-n/Kconfig: Fix "bool" menu text.
- console/Kconfig: Don't mention defaults in the menu string, kconfig
already displays them anyway.
- Kill "Drivers" menu for now, it only confuses users as long as it's emtpy.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4567 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This eliminates 56kb of padding in the bootblock.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4554 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Works on Kontron, qemu, and serengeti.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
tested on abuild only.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
and we will fix issues as they appear.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware, works fine.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4423 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware with the patch from r4398 and works fine as soon
as Linux boots (no VGA in FILO for some reason, will investigate).
In order to make the 'i810.vga' VGA blob from the vendor BIOS work
you have to make the check for PCI device ID mismatches non-fatal
(for now) in the src/devices/pci_rom.c file like this:
Index: src/devices/pci_rom.c
===================================================================
--- src/devices/pci_rom.c (Revision 4393)
+++ src/devices/pci_rom.c (Arbeitskopie)
@@ -87,7 +87,7 @@
if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) {
printk_err("Device or Vendor ID mismatch Vendor %04x, Device %04x\n",
rom_data->vendor, rom_data->device);
- return NULL;
+ // return NULL;
}
printk_spew("PCI ROM Image, Class Code %04x%02x, Code Type %02x\n",
The reason is that the VGA blob thinks the proper VGA device ID is 0x7123
whereas it really is 0x7121 on hardware. There are multiple ways to work
around this (there have been many discussions in the past), we'll see which
method will be used in future...
Note: This has been tested against r4393 only for now to make sure there
are no problems because of the recent resource allocator changes, see
http://www.coreboot.org/pipermail/coreboot/2009-July/050486.html.
Tests with trunk will follow.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Kconfig)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It's basically done with the following script and some manual fixup:
VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, enable HIGH_TABLES support for this board.
The HIGH_TABLES failed with:
No matching ram area found for range:
[0x00000000000f0000, 0x0000000000100000)
Ram areas
[0x0000000000000000, 0x0000000000001000) Reserved
[0x0000000000001000, 0x00000000000a0000) RAM
[0x0000000000100000, 0x000000000fff0000) RAM
[0x000000000fff0000, 0x0000000010000000) Reserved
SELFBOOT RETURNED!
Boot failed.
The fix was to change northbridge.c as follows:
- ram_resource(dev, idx++, 1024, tolmk - 1024);
+ ram_resource(dev, idx++, 768, tolmk - 768);
This is build-tested and tested on hardware by me. It boots fine,
for instace with SeaBIOS and the standard GRUB1 from my disk.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
