This was causing a failure when building platforms with no bootblock
when building with make -jXX
Change-Id: Ic4cd4fe8ac82bd1e9ce114dbd53763538d125af3
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The Razer Blade Stealth H2U is a KabyLake System using:
- Intel KBL 7500U
- ITE8528E SuperIO
- Intel 600P Series NVMe SSD
- Either four MT52L1G32D4PG (16GB) or MT52L512MB32D4PG (8GB)
of soldered memory in dualchannel mode
- (Optional) Touchscreen
- HDMI 2.0a via DP-1: Paradetech PS175
- AlpineRidge Thunderbolt 3 controller
- TPS65982 USB-PD power switch / multiplexer
Even though it has a 16MB chip equipped (W25Q128.V) only the first 8MB
are used and mapped via IFD. The rest is left empty (0xFF). The flash is
not secured in any way and can be read via flashrom. It should be the
source for this port's IFD and ME blobs.
Working:
- USB-A Ports left and right
- Speakers
- Touchscreen (USB)
- Onboard Keyboard in Linux
- NVMe SSD
- SeaBIOS, Tianocore and Grub Payloads
- Webcam
- Powersaving Modes
- Battery state and LID switch, sometimes slow to update.
- Touchpad (I2C-HID)
- Headphones
Not part of this commit:
- Thunderbolt / USB-C (Requires advanced EC signaling)
- Full HDMI support (Currently requires plugged connection at boot)
Change-Id: I7ede881d631e1863f07f5130f84bc3b8ca61a350
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
CONFIG_MAINBOARD_DEPTHCHARGE is used to override the Board
config for depthcharge which inherit from CONFIG_MAINBOARD_PART_NUMBER.
This is mainly to avoid depthcharge config duplication.
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com>
Change-Id: I6cbc93ca38ad6deeca2c2fb7770024a24233b6f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
When accessing register with multiple bit fields, the common approach is
to use clrsetbits_le32, for example:
clrsetbits(®, (1 << 0) | (0x3 << 1) | (0x7 << 10),
(1 << 0) | (0x1 << 1) | (0x5 << 10));
This hard to maintain because we have to calculate the mask values
manually, make sure the duplicated shift (offset) was set correctly.
And it may be even worse if the value to set will be based on some
runtime values (that many developers will do a if-block with two very
similar argument list), and leaving lots of magic numbers.
We want to encourage developers always giving field names, and have a
better way of setting fields. The proposed utility macros are:
DEFINE_BITFIELD(name, high_bit, low_bit)
EXTRACT_BITFIELD(value, name)
WRITE32_BITFIELDS(addr, name, value, [name2, value2, ...])
READ32_BITFIELD(addr, name)
Where a developer can easily convert from data sheet like
BITS NAME
26:24 SEC_VIO
Into a declaration
DEFINE_BITFIELD(SEC_VIO, 26, 24)
Then, a simple call can set the field as:
WRITE32_BITFIELDS(®, SEC_VIO, 2);
That is much easier to understand than
clrsetbits_le32(®, 0x7 << 24, 0x2 << 24);
And to extract the value:
READ32_BITFIELD(®, SEC_VIO)
That is equivalent to:
(read32(®) & 0x3) >> 24
Change-Id: I8a1b17142f7a7dc6c441b0b1ee67d60d73ec8cc8
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35463
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable root port IOU0 to which built-in NIC is attached.
TEST=on OCP monolake, hide built-in NIC and make sure OS does not report
built-in NIC
Change-Id: I2384e7dd073355f0ced2902ac2d8418996b1c5aa
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Add function to hide IIO PCIe root ports.
TEST=On OCP Monolake, hide built-in NIC PCIe root port [0.2.2 and 0.2.3]
and make sure OS does not detect built-in NIC.
Change-Id: I2fcac5b7d9a7a52a2801c010bfccf247f2a44581
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
- configure DMA fw_cfg
- add support to read using fw_cfg_dma
- provide fw config version id info in logs
BUG=N/A
TEST=Build and boot using qemu-i440fx.
Change-Id: I0be5355b124af40aba62c0840790d46ed0fe80a2
Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Devices using eMCP may run at a high DRAM frequency (e.g., 3600Mbps)
while those with discrete DRAM can only run at 3200Mbps. This patch
enables 3600Mbps for eMCP DDR for better system performance.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly and stress test passes on Kukui
Change-Id: Iab6a9c2c390feeb9497b051a255b29566909e656
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Fill the dimm info struct to make SMBIOS type 17 appear.
TESTED=Up Squared
Change-Id: I4de63362c8fea8a886594cdcf0eec48421afb605
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34564
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For platform independend exposure of FMAP through a kernel module
cache the FMAP in CBMEM. In addition add a pointer in coreboot tables
pointing to the introduced CBMEM area.
To not waste the allocated DRAM, use the cached CBMEM in RAM enabled
stages if possible.
Tested on qemu using
https://github.com/9elements/linux/commits/google_firmware_fmap2
Tested on QEMU and Supermicro X11SSH-TF.
Change-Id: I4e01c573c3edfa34dbba5fe7604d4f6e18b584d5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Drop unused CNF2_LPC_EN, as there is no device which uses IO 0x4e/4f.
Do not use the mainboard model to set COMA_LPC_EN. Make use of
NO_UART_ON_SUPERIO instead, as it is more future-proof.
Change-Id: Iac49250b0f509a42012f82db8aa85ba85559c66f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
BUG=b:140545732
TEST=build bios and spd index set to 6, verify DUT bring up normally
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I337b0bdcd37a9c4baacccbc6786968031a41b31e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35511
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Read-modify-write needs to access the same register. Numerically
both used defines are 0x3e, while register implementations are
not identical but only similar.
Change-Id: I9348b855320f86868e2d3ef76d3b8d7a4ab7fae0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
CdClock does not need to be set because the board does not use IGD.
Change-Id: I6835ccdf80530f9efc6fdeb0363dcf9267f99d21
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Implement Locator and Bank fields (as reported by dmidecode) to match
vendor BIOS.
TEST=on OCP monolake, run dmidecode tool and see that "Locator" field
matches expectation.
Change-Id: Ia271ff1e596ba469cf42e23d8390401c27670a27
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Currently "DIMM numbers" increase monotonically for all the channels. However,
commonly DIMMS are numerated on per-channel basis. This change makes numeration
match the convention.
TEST=on OCP monolake, run dmidecode tool and see that "Locator" field matches
expectation.
Change-Id: I3e7858545471867a0210e1b9ef646529b8e2a31c
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35318
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the new SPI code from common folder, delete spi.c. SPI related macros
must be single defined, in southbridge.h if they are used by files other
than the common SPI code, fch_spi.h if they are only used by the common
SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h,
because it can change between SOC.
BUG=b:136595978
TEST=None, code already tested with grunt.
Change-Id: I68008ce076d348adbdabf7b49cec8783dd7134b4
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Use the new SPI code from common folder, delete spi.c. SPI related macros
must be single defined, in southbridge.h if they are used by files other
than the common SPI code, fch_spi.h if they are only used by the common
SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h,
because it can change between SOC.
BUG=b:136595978
TEST=Build and boot grunt using new SPI code, with debug enabled. Check
output.
Change-Id: I639973d993316a10daa7564462e689b2c183f536
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Create a new SPI code that overrides flash operations and uses the SPI
controller within the FCH to its fullest.
Reference: Family 15h models 70h-7Fh BKDG revision 3.06 (public)
BUG=b:136595978
TEST=Build and boot grunt using this code, with debug enabled. Check
output.
Change-Id: Id293fb9b2da84c4206c7a1341b64e83fc0b8d71d
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
With the support of various algorithms and banks in tlcl_extend(),
digest_algo parameter of tpm_extend_pcr() started defining the target
PCR bank in TPM2 case.
The OS expects coreboot to extend the SHA256 bank of BOOT_MODE_PCR.
The value that the OS expects coreboot to extend into BOOT_MODE_PCR
is the SHA1 digest of mode bits extended to the length of SHA256 digest
by appending zero bytes.
Thus the correct value for digest_algo passed into tpm_extend_pcr() for
BOOT_MODE_PCR is TPM_ALG_SHA256.
This didn't matter until adding the support for multiple digest introduced
by patches like https://review.coreboot.org/c/coreboot/+/33252, as
tlcl_extend always used SHA256 bank before.
Change-Id: I834fec24023cd10344cc359117f00fc80c61b80c
Signed-off-by: Andrey Pronin <apronin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35476
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As we redirect all `dd` output to /dev/null (it would clutter the
console otherwise), there is no error message if a binary to be
added isn't found. If we add them as dependency, OTOH, `make` will
complain properly.
Change-Id: I40c3979b84341cb88c7e9a5084c1a97230ea5503
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33327
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add more DRAM frequency bootup to support DRAM frequencies 1600Mbps,
2400Mbps, 3200Mbps and 3600Mbps.
BUG=b:80501386
BRANCH=none
TEST=Memory test passes on eMCP platform
Change-Id: Ic1378ca43fb333c445ca77e7dc0844cdf65f2207
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch implements the dram init setting by replacing the hard-coded
init sequence with a series of functions to support calibration for more
frequencies. These functions are modified from MediaTek's internal DRAM
full calibration source code.
BUG=b:80501386
BRANCH=none
TEST=1. Kukui boots correctly
2. Stress test (/usr/sbin/memtester 500M) passes on Kukui
Change-Id: I756ad37e78cd1384ee0eb97e5e18c5461d73bc7b
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
The specified CBFS_SIZE does not make sense.
The boards BIOS region is 0xb00000. Correct the value.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Ia3014c7fd081030607790ced6bb55323086f1161
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35458
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The bus variable doesn't live outside the scope of this function, and is
only used as a convenient way for passing the pointers to all the
sub-functions, so it doesn't need to be allocated. Put it on the stack
instead. A similar fix for ipq806x was done in 0f33d8c29a
(soc/qualcomm/ipq806x: Remove unnecessary allocation).
Change-Id: Ibb1129b92e38a105e100f59e03d107de340b925c
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1294801
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Intel's EDS says "1 = GPIO Driver Mode. GPIO input event updates are
limited to GPI_STS. GPI_GPE_STS, GPI_NMI_STS and/or GPI_SMI_STS updates
are masked." Therefore, the GPI_GPIO_DRIVER_SCI option for pad
configuration is meaningless, as any GPE will be masked if the GPIO
driver is set as owner.
Change-Id: Ia0cd0041dfc985cbe388cb89a4026038c7fb4383
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35460
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A closer read of the EDS indicates that when GPIO Driver mode is
selected, GPIO input event updates are limited to GPI_STS only.
GPI_GPE_STS updates are therefore masked, and we don't want to enable
this behavior. It masks the GPE and does not allow us to see this GPE
as a wake source, obscuring the reason that the system woke up.
Also switch the IRQ from level-triggered to edge-triggered,
otherwise the system will auto-wake from any sleep state when the
pen is ejected from the garage.
BUG=b:132981083
BRANCH=none
TEST=Wake up system from S0ix using pen eject, verify that mosys
eventlog shows GPE#8 as the S0ix wakeup source. Wake up system from S3
via pen eject, and verify that the wakeup source shows as GPE#8.
Change-Id: If017e12e23134f5cfed7cbb6047cc9badd9bf7e8
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35459
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove duplicate headings, move vendor sections that were placed
amidst other vendor hierarchies, and while we are at it, sort it
alphabetically.
Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current clang-format configuration is completely broken. It forces
one to change the code style of patches before pushing them, only to
find out that checkpatch now complains about it. This means newcomers
get scared away, and developers only get angered and frustrated about
it, and end up working around clang-format's requirements anyway.
For now, make clang-format's complaints non-fatal, reducing them to text
noise. However, since clang-format is currently unusable, reverting it
out would be preferred.
Change-Id: Iffa8934efa1c27c04e10545f66d8f9976e74c367
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
To create a new variant of the hatch baseboard, we need to
add the variant's GBB_HWID and other information to Kconfig
and Kconfig.name, and set up a skeletal build based on the
hatch baseboard.
BUG=b:140261109
BRANCH=none
TEST=``./create_coreboot_variant.sh sushi && git show``
Kconfig will have three new lines for the SUSHI variant, and
Kconfig.name will have an entirely new section.
New files created are:
variants/sushi/Makefile.inc
variants/sushi/overridetree.cb
variants/sushi/include/ec.h
variants/sushi/include/gpio.h
variants/sushi/include/variant/acpi/dptf.asl
Also run the script with an existing board name to verify that you
can't create a variant that already exists.
Change-Id: I1a5b9c8735faafebb2e4e384cb3346867d64c556
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Implementing logic base on sensor detection to determine SKU id.
BUG=b:140472369
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I5e71ae6b97378b78055735bbf4b6b55ffe38b978
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35366
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the same CPUID switch block to resolve the multiplier
to derive TSC from FSB/BCLK frequency.
Do not return 0 as base frequency.
Change-Id: Ib7f1815b3fac7a610f7203720d526eac152a1648
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31340
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Martin Roth