- Fix typo in comment
- Aphabetize package list and put each package on a single line
- Add environment variables into coreboot user's .bashrc file
- Add openssl, qemu, and shellcheck to installed packages
Change-Id: I37771be5d3ecaa61d76d99e689b422144a6d7dc6
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/21582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@chromium.org>
- Update checkpatch.pl to version 0547fa58
(checkpatch: add 6 missing types to --list-types)
- Update spelling.txt to version d9f91f8
(scripts/spelling.txt: add a bunch more spelling mistakes)
- Fix an additional unescaped left brace in a regex - causes warnings
in new versions of perl.
Change-Id: Ic443099e90a46280f18d58799afc72d00dc83793
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/21581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch outputs decoding errors with BIOS_WARNING instead of
depending on CONFIG_DEBUG_RAM_SETUP.
Returns SPD_STATUS_INVALID on invalid settings for tRR, bcd and tCK
and doesn't try to create a valid setting if an invalid setting is
detected.
Change-Id: Iee434d1fa1a9d911cc3683b88b260881ed6434ea
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This simplifies computing dram timings a lot.
This removes computation of rank size based on columns, rows,
banks,... and uses the information in SPD byte 31. The result of this
is that dimms with multiple asymmetric ranks are not supported
anymore. These however are very rare and most likely never tested on
this platform.
This also uses i2c block read instead of byte read to speed up the
raminit. The result is less time is being spend reading SPDs.
It still keeps smbus read byte as a backup if i2c block read were to
fail.
Change-Id: I97c93939d11807752797785dd88c70b43a236ee3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
If results are uploaded the temporary directory in which they are
stored gets deleted, yet we currently point to the deleted directory in
the output.
This patch fixes it so that we point to the actual location in the local
repository where uploaded results are found.
Change-Id: I1f42c3296ec1d19fcfa4911307e07e67de289895
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-on: https://review.coreboot.org/21415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Add PMC pci driver on top of PMC common code, also include pmc init code
reference from skylake.
Change-Id: I95895a3e26cdebd98a4e54720bd4730542707d7e
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/21251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The ACPI spec requires devices with children to have an HID,
and Windows enforces this strictly. Without the SIO device
having an HID, Windows will not detect the attached PS2 keyboard
and trackpad. Therefore, add the proper HID.
TEST: boot Windows on google/stout, observe PS2 keyboard and
trackpad detected and functional.
Change-Id: I61d7341c15483f8e1fe0e485a25591ceb92eaae1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
ToString() requires the input buffer data to be null-terminated,
but the data returned by the EC is not, leading Windows to fail
to report any battery data at all. Correct this by concatenating
a null terminator (0x00) to the end of the buffer data before
inputting to ToString() where needed
TEST: boot Windows on google/stout, observe battery data
reported correctly.
Change-Id: I974afcd6ff1c617301d0897d6bd1fe14200aa3b9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
EC ACPI code is calculating the drain rate, but does not store it
in the battery status package before returning it. Correct this
omission, and set the drain rate to a preset minimum if calculated
value is less. Taken from vendor firmware ACPI dump.
Change-Id: I52837d5879112ab3103976bda28906fac8f880ec
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
me_cleaner now allows setting a bit in the PCH straps - AltMeDisable
tells the ME to stop execution after BUP - disabling the 30 minute
watchdog - but also "breaking" the ME. The ME reports opmode = 2.
This means the ME will not respond when we wait for an acknowledgement
about the DRAM being ready. The current code waits 5 seconds for a
response, that in this case, never comes.
If the ME is reporting opmode 2, don't delay or wait for a response
from the ME.
Tested on my X220, this patch fixed the five seconds before the payload
executed. Verified using the timestamp patch.
Change-Id: Ifdda6b2dbb8ae3a650be6d5df6c60475a3fa74aa
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Reviewed-on: https://review.coreboot.org/21466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add find_fcba(), find_frba(), find_fmba(), find_fpsba()
and find_fmsba() to replace those copy-pasted addressings.
This commit is one separated from the original I6d05418c.
Change-Id: I98965711e4cb9792e5cc86cc4c1035559e0274f5
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Redesign some array-like structures as true arrays,
and rewrite functions to dump them as loops.
This commit is one separated from the original I6d05418c.
Change-Id: I161c9a2ae83d26e658d67d0804e943fff95fe076
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
There is no reason to keep a separate region_filenames array,
so I merge it into region_name(s).
This commit is one separated from the original I6d05418c.
Change-Id: I38489c6d3b3c161e9b0281188e6cdd0b62e38335
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21509
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Const-correct some functions which do not write back,
and use pointers to access existing region_t variables.
The last changeset is dismantled this time.
This commit is only focused on const-correctness.
Change-Id: I6d05418c8b32fa31dcd038a3e56f9aefe13fa9c4
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21288
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows the user to specify a custom path for cbmem on the DUT.
Change-Id: I2c28737d6efaae238fd6831cd3d00b2142b39a4c
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-on: https://review.coreboot.org/21565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
According to clang, main has no prototype for bcom/winnetp680
so add it into corresponding raminit.h
Change-Id: I8a55267901986757a4fa88ee13460ffbed3eeadc
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Add lens_focus property with reference to VCM device for OV13858
camera module to register the corresponding v4l2 sub-device
asynchronously.
BUG=b:64133998
BRANCH=none
TEST=Build and boot soraka. Dump DSDT and verified that it has the
required entries and verified the camera functionality.
Change-Id: Ib22403f668dd07d6b9226fe2c22b533223b69473
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/21512
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set keyboard backlight to 75% on boot, except when resuming
from S3. This enables the backlight at a reasonable level
prior to the OS driver taking over, providing early proof-of-life
and enhanced usability in grub etc.
Uses same method as other google boards with a keyboard backlight
(chell, link, samus). 75% value determined based on user feedback.
TEST: boot google/lulu,gandof boards, observe keyboard backlight
enabled in pre-OS environment.
Change-Id: I7ed59289419af21764b1b5bd0a534d3b630c6c6b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Since the git:// protocol is unencrypted and unauthenticated, there's a
security risk associated with using it: A man-in-the-middle attacker
could replace e.g. the master branch with malicious code.
Mitigate this risk somewhat by cloning GRUB2 via HTTPS.
Change-Id: Ice8f8d108e7dfa1a1ecd58d9735944fa9570ace8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Add support for google/reks (Lenovo Chromebook N22/N42) as
a variant of the cyan Braswell basebaseboard.
- Add board-specific code as the new reks variant
- Add new I2C touchscreen device and SPD files to the baseboard
for potential reuse by other variants
Sourced from Chromium branch firmware-reks-7287.133.B,
commit 7d812d4: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1""
Change-Id: Iac9e2b5661aa33e12927f4cb84ebaee36522a385
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Add support for google/edgar (Acer Chromebook 14 CB3-431) as
a variant of the cyan Braswell basebaseboard.
- Add board-specific code as the new edgar variant
- Add common code to the baseboard which will apply to all
variants other than cyan
Sourced from Chromium branch firmware-edgar-7287.167.B,
commit 2319742: Edgar: Add Micron MT52L256M32D1PF-107 SPD data
Change-Id: I58548cbbc85828f37c0023e8aa9e09bdca612659
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Bit 7 is set on all options so only the default option in the switch
statement is returned.
Change-Id: I6a698ec9c15a2611a34c5965edf93638553775f0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Add EC entries into chromeos.fmd file.
BRANCH=None
BUG=None
TEST=Flash image and confirm system can get out of reset successfully.
System will not be able to reach reset vector if flash map described in
coreboot does not match intel flash map generated from fit.
Change-Id: Ic18ce59941b4ff8171fe661d332e3e521d988341
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/21526
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Sometimes the BUG/BRANCH/TEST metadata isn't separated by a newline
from the later git/gerrit metadata, which messes up further processing.
Add that newline to minimize the amount of human intervention required.
Change-Id: I37171bf6764b64e0ab0e81297a03f4d8b7744256
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/21534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
UNCORE PRMRR BASE and MASK MSRs are not common, so move to
SOC specific header file and rename the #define to start with MSR_*
Change-Id: I799c43f0b7a9eec5b3b69ab0f5100935c7f3f170
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/21247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Use soc_get_uncore_prmmr_base_and_mask() API to get PRMRR base and mask.
Change-Id: I2fd96607c4f5fed97e38087b60d47d6daacc7646
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/21246
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To remove chip.h dependency from SGX common code
- Create API soc_fill_sgx_param() and use it in sgx.c
- Implement same API for skylake/kabylake
- define sgx_param structure
Also include intelblocks/sgx.h instead of soc/msr.h
Change-Id: I358f0817bec5dd6cd147a645675b5688969a04e0
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/21528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove extra unnecessary space at end of line.
Change-Id: I27688c3b8df71b875f1dc1020465d838756362be
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/21521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
I imported the LZ4 compression code and want to keep an eye on it to
ensure that our sources stay in sync with upstream.
Change-Id: I249ce24f6630d66d451d993198cd267478e5743e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/21488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Setup cyan to be the baseboard for other Google Braswell
boards, to be added in subsequent commits:
- Keep code common to all Google Braswell boards in the baseboard,
and separate out the board-specific bits into the new cyan variant.
- Define the I2C ACPI devices such that they can be easily reused for
other variants.
- Switch the trackpad/touchscreen interrupts from edge to level,
for better performance/compatibility, as was done with all previous
Google boards.
- Add code to the baseboard to allow optional variant-specific
parameters to be used for both memory and silicon init.
- Remove superfluous includes, replace some hardcoded values with
variables, and correct typos/formatting errors.
Change-Id: Iabbbad16efa9cfa79338f4e94d0771779900d8d9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21126
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There are old legacy onboard devices which are too slow for a coreboot
boot with log level BIOS_ERR. In this case coreboot is so fast that these
devices do not have enough time to become visible on the PCI bus and
this in turn leads to missing resource allocation for this devices. The
most generic way to work around this problem on existing hardware is to
introduce a delay right before the PCI enumeration starts. The needed
delay time depends on the hardware and will therefore be get from
hwinfo.
Change-Id: Ia91babc81e3a347bbc498c3def97b2ea70e10922
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/21518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Add a function to retrieve the elapsed time since boot. For that purpose
use the base time in the timestamp table among with the current
timestamp at call time of the function. So more precise the returned
time is the elapsed time since the timestamp was initialized scaled
in microseconds. This was chosen to get a reliable value even on
platforms where the TSC might not be reset on software reset or warm
start.
Change-Id: Ib93ad89078645c0ebe256048cb48f9622c90451f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/21516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Martin Roth