In preparation for expanding the testing, move the test targets
out of the top level Makefile.inc and into a separate
subdirectory.
Change-Id: Ie252c7555223f9ce76b54e6f7b66d03f3cf60500
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@google.com>
The coreboot sites support HTTPS, and requests over HTTP with SSL are
also redirected. So use the more secure URLs, which also saves a
request most of the times, as nothing needs to be redirected.
Run the command below to replace all occurences.
```
$ git grep -l -E 'http://(www.|review.|)coreboot.org'
| xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g'
```
Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/20034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If CONSOLE_SPI_FLASH config is enabled, we write the cbmem
messages to the 'CONSOLE' area in FMAP which allows us to grab the
log when we read the flash.
This is useful when you don't have usb debugging, and
UART lines are hard to find. Since a failure to boot would
require a hardware flasher anyways, we can get the log
at the same time.
This feature should only be used when no alternative is
found and only when we can't boot the system, because
excessive writes to the flash is not recommended.
This has been tested on purism/librem13 v2 and librem 15 v3 which
run Intel Skylake hardware. It has not been tested on other archs
or with a driver other than the fast_spi.
Change-Id: I74a297b94f6881d8c27cbe5168f161d8331c3df3
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
The ramstage-c-ccopts variable needs to be double dereferenced
for the cbfs-files-processor-struct handler so all the ccopts
are included since the ramstage-c-ccopts is fully constructed
later by another function. Without this not all the flags
are present on the command line.
Change-Id: I5425b3c1f23d767c61f654dd287584403f85d719
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19380
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Add a Makefile.inc, based on sconfig's, to use the _shipped variants
so that the build doesn't have to generate them with flex & bison.
The GENPARSER check is inactive, and will be updated in the next
commit.
Add the c_shipped & h_shipped files for the current .l & .y files.
Change-Id: Ia6c68bfb6e0611ceb6bc76cc66e43266bafc98ad
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19228
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With COREBOOT_BUILD_DIR set, nvramcui & coreinfo were getting built
in the wrong location, causing those builds to fail.
Also, because they were built in the wrong location, the build failures
were not detected by jenkins which was looking for the junit.xml files
under the payloads directory.
Change-Id: I9d81ebabebe5d8b5f79ae63f8a5f388430e06754
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/19069
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
In builds without CONFIG_VBOOT_SEPARATE_VERSTAGE, verstage files are
linked directly into the bootblock or the romstage. However, they're
still compiled with a separate "libverstage" source file class, linked
into an intermediate library and then linked into the final destination
stage.
There is no obvious benefit to doing it this way and it's unclear why it
was chosen in the first place... there are, however, obvious
disadvantages: it can result in code that is used by both libverstage
and the host stage to occur twice in the output binary. It also means
that libverstage files have their separate compiler flags that are not
necessarily aligned with the host stage, which can lead to weird effects
like <rules.h> macros not being set the way you would expect. In fact,
VBOOT_STARTS_IN_ROMSTAGE configurations are currently broken on x86
because their libverstage code that gets compiled into the romstage sets
ENV_VERSTAGE, but CAR migration code expects all ENV_VERSTAGE code to
run pre-migration.
This patch resolves these problems by removing the separate library.
There is no more difference between the 'verstage' and 'libverstage'
classes, and the source files added to them are just treated the same
way a bootblock or romstage source files in configurations where the
verstage is linked into either of these respective stages (allowing for
the normal object code deduplication and causing those files to be
compiled with the same flags as the host stage's files).
Tested this whole series by booting a Kevin, an Elm (both with and
without SEPARATE_VERSTAGE) and a Falco in normal and recovery mode.
Change-Id: I6bb84a9bf1cd54f2e02ca1f665740a9c88d88df4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18302
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We rely on gnu make, so we can expect the jobserver to be around in
parallel builds, too. Avoids some make warnings and slightly speeds up
the build if those sub-makes are executed (eg for arm-trusted-firmware
and vboot).
Change-Id: I0e6a77f2813f7453d53e88e0214ad8c1b8689042
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/18263
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Without this motherboards that requires a non zero timeout for ps2
keyboards on SeaBIOS don't build when CONFIG_UPDATE_IMAGE is set.
An alternative way to achieve this file would be to include a cbfsfile
instead of calling cbfstool. That way the file gets updated/added both
both image update and regular build. A difficulty of that approach is
that it needs to convert a decimal to a binary in little endian
representation, which is not a trivial thing to do in a Makefile.
Change-Id: Icafba8d3e279a2e70e607abba81e3dbebfb55e4b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18231
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It takes a long time for no gain: We don't need to update the
submodules, we don't need to fetch the revision, we don't need to find
the compilers, when all we want to do is to manipulate the .config file
or clean the build directory.
Change-Id: Ie1bd446a0d49a81e3cccdb56fe2c43ffd83b6c98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18182
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Change-Id: I7bd0a17f9b20e46aee836fef1ff0b39de8670a15
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18202
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Different compiler versions use a different C language standard by
default.
GCC 4.9 uses GNU89 by default [1], while GCC 5.x uses GNU11 [2].
The discussion on the mailing list in thread *[RFC] Setting C99 by
default* [3] resulted in the preference of C11, which results in build
errors.
So explicitly set it to GNU11, which is also what the current coreboot
toolchain with GCC 5.3 is using.
[1] https://gcc.gnu.org/onlinedocs/gcc-4.9.4/gcc/C-Dialect-Options.html
[2] https://gcc.gnu.org/onlinedocs/gcc-5.4.0/gcc/Standards.html
[3] https://www.coreboot.org/pipermail/coreboot/2016-November/082541.html
Change-Id: If1569618f8044925ff72dcf3543480b34d4f90d6
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/17636
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
- Update the junit.xml target to make it less util specific
- Add builds of coreboot internal payloads: nvramcui and coreinfo
Change-Id: I97fda909065659ab7fa4c8ee00d936d97b255bf7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17014
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
export VARIANT_DIR at the top level, rather than doing so multiple
times at the SoC / board level
Change-Id: If825701450c78289cb8cca731d589e12aafced11
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17451
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
amdfwtool was getting the ROM size as a #define when it was built.
It has been updated to pass it in as a command line parameter, so
now it can be built just once for abuild as a shared tool.
Update the calls to amdfwtool to pass the ROM size.
All platforms using amdfwtool had the output verified using
a binary compare.
This reverts commit 0529236ed2
(Makefile.inc: Don't share amdfwtool between platforms)
Change-Id: I188b34e08249f2d00bd48957ced750b21f1ec348
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17327
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
`libhwbase` is a SPARK library that contains some basic support for i/o
access, debugging, timers. Just what I put around `libgfxinit`, to make
it build standalone.
Change-Id: I1918680c14696215522e1c5dae072235bb4e71a3
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16948
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Ada knows a pragma `Debug` that is used to exclude procedure calls from
a release build. The new option `DEBUG_ADA_CODE` enables those procedure
calls.
Change-Id: Id5298e5819606c3d1cf2a2a1cd4f1d5d1227aa4f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16943
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Some distribution compilers enable Position Independent Executable (PIE)
by default, causing a build failure.
So explicitly disable PIE by passing the flag `-fno-pie`, to fix the
build error.
Change-Id: I1b7d7168e34c5c93c25bc03ffa49b2eeac0e76f8
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/17097
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
amdfwtool currently gets built for a specific size of ROM chip. This
should be updated to be passed in on the amdfwtool command line, but
until that's done, stop sharing the tool between builds.
This caused a problem for abuild when we tried changing the default
rom to one that used a 256KB rom chip. That wasn't large enough for
all of the files included by amdfwtool on several platforms, causing
build failures.
Change-Id: Ib08f3283e5be956f995a4a416a70b12a32462882
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17070
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds '--includes' option to 'git config --global' command
to allow user name and email to be defined in a file included from
the global gitconfig (~/.gitconfig) file.
BUG=none
BRANCH=none
TEST=make gitconfig with ~/.gitconfig including another file which
defines user.name and email.
Change-Id: I4fe61078b143c3a2e26b0be69c3ca8e6f069d8b0
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/16912
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
All systems are building with IASL warnings as errors enabled.
Remove the option to disable it.
Remove the notification at the end of the build.
Change-Id: I5c6218c182fdf173b4026fd010d939a5fa36040e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16606
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Updating submodules seem to give people headaches, so this adds a pair
of git aliases to update them.
'git sup' updates the submodules to the latest versions, but leaves any
locally modified files.
'git sup-destroy' will remove the current submodules and re-initialize
them. This deletes any local changes.
Change-Id: Id62a30d88b3b6d285b3f00555d7609509aa1561f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16573
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a stripped-down version of libgnat. This is somehow comparable to
libgcc but for Ada programs. It's licensed under GPLv3 but with the
runtime library exception. So it's totally fine to link it with our
GPLv2 code and keep it under GPLv2.
Change-Id: Ie6522abf093f0a516b9ae18ddc69131bd721dc0c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/11836
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Some remarks on the make process:
o We usually leave Ada specs (.ads files which are like c headers)
together with the bodies (implementations in .adb files) in one
directory. So we have to know, where they live.
o If there is no matching .adb an .ads is a valid source file and
we'll generate an object file from it.
o Object files need to have the same basename as their source files :-/
That's why we put them in build/<class>/ dirs now.
o We track dependencies by looking at the compiler output (.ali files
which accompany every .o). This way we don't need any gnatmake
magic, or even more complex, less portable tools.
For ADAFLAGS_common, I simply copied the CFLAGS_common whilst dropping
everything unsupported and adding sane warning options.
The set of language features is highly restricted (see gnat.adc). This
should suit the embedded nature of coreboot and helps proving absence
of runtime errors with SPARK.
Change-Id: I70df9adbd467ecd2dc7c5c1cf418b7765aca4e93
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13044
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Commit 93ef3ff makes the following only print the part number when
the ROM is built. In Makefile.inc, $(MAINBOARDDIR) is the variable
that has the quotes stripped off from $(CONFIG_MAINBOARD_DIR), so
use it instead of $(MAINBOARD_DIR).
build_complete:: coreboot
printf "\nBuilt %s (%s)\n" $(MAINBOARD_DIR) \
$(CONFIG_MAINBOARD_PART_NUMBER)
Change-Id: I729a583182937db7a926eb75aa28dfb53360046c
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/16410
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This patch adds functionality to compile a C data structure into a raw
binary file, add it to CBFS and allow coreboot to load it at runtime.
This is useful in all cases where we need to be able to have several
larger data sets available in an image, but will only require a small
subset of them at boot (a classic example would be DRAM parameters) or
only require it in certain boot modes. This allows us to load less data
from flash and increase boot speed compared to solutions that compile
all data sets into a stage.
Each structure has to be defined in a separate .c file which contains no
functions and only a single global variable. The data type must be
serialization safe (composed of only fixed-width types, paying attention
to padding). It must be added to CBFS in a Makefile with the 'struct'
file processor.
Change-Id: Iab65c0b6ebea235089f741eaa8098743e54d6ccc
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16272
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
That's more useful than just COREBOOT for more complex scenarios
Change-Id: I93cd686d698799a3331ca2ea487cd6efb304caa0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16143
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It was a band-aid that isn't required any more.
Change-Id: Ib1793ae8fe25eecf9bd5ab8e5feef0d9380b43c2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16142
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
To override fallback/foo's position or alignment in region BAR, use
fallback/foo-BAR-{position,align} = 0x1234
Like for the global settings, specifying both isn't allowed
because that's rather pointless.
Change-Id: I94f41ebc9f35108267265df4164f23b70e3d0bf6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16140
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
They're now sorted later in the process after the per-region file lists
are determined.
Change-Id: I0bba381d09dc4b99e2fe5cae16ff7ffcb5b3aa82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16138
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Make sure that files with a fixed position are placed first (whose order
doesn't matter: either they collide or they don't), then all aligned
files (where we just hope that the right thing happens) and finally the
files with no further requirements (again, hope).
It's still a pretty good heuristic given a typical coreboot image.
The global sorting that happens earlier in the build flow will be
removed in the future to make room for per-region requirements.
Change-Id: I269c00b2ece262c95d310b76a6651c9574badb58
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16137
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Instead of adding each file in all requested regions, sort by region,
then by file.
This is in preparation of per-region file options
(eg. position, alignment)
Change-Id: Ide09a1c8840279380294a059bbd5d2f9f0cba780
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16130
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The variable MAINBOARD_DIR already has the quotes stripped off.
Change-Id: Ib434ce92bdbc49180fb3f713b26d65ba4cf8c441
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/16117
Tested-by: build bot (Jenkins)
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Minor change - Instead of stripping the quotes from CONFIG_DEVICETREE
inline, add it to the location where we normalize all the other Kconfig
variables.
Change-Id: Idbc58179c7b45160afef7d7e44f9b3b334f8c4a7
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/16116
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The mainboard chip.h files were (mostly) removed long ago.
Change-Id: I1d5a9381945427c96868fa17756e6ecabb1048b2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16080
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of having directories and file names hardcoded, pass in the full
path and filename of both the input and output files.
In the makefile, create variables for these values, and use them in
places that previously had the names and paths written out.
Change-Id: Icb6f536547ce3193980ec5d60c786a29755c2813
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16078
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of forcing the hardcoded 'devicetree.cb' filename under the
mainboard directory, this allows mainboards to select a filename for
the devicetree file.
This allows mainboard variants that need to use different devicetree
files to live under the same directory.
Change-Id: I761e676ba5d5f70d1fb86656b528f63db169fcef
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12529
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The first attempt of providing a options-for-region function to call
to determining a file's cbfstool options would work, but it means there
can only be one instance which has to handle all of the files that may
need an override. That logic can be problematic in impelementation.
Instead, provide a mechanism to target cbfstool options for a given
CBFS region where the implementation is tightly coupled in the build
system to where the file as requested to be added to cbfs. This allows
there to be a base set of cbfstool options while more easily extending
arguments on specific regions.
Example which adds '-b 0x10000' only for the COREBOOT CBFS region:
cbfs-files-y += file.bin
file.bin-COREBOOT-cbfstool-opts := -b 0x10000
Change-Id: Idfafb0205be42768adb04bb0a30fe46a9ca1bd57
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14640
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and
developer mode check functions to vboot. Thus, get rid of the
BOOTMODE_STRAPS option which controlled these functions under src/lib.
BUG=chrome-os-partner:55639
Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15868
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use
of verified boot library without having to stick to CHROMEOS.
BUG=chrome-os-partner:55639
Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15867
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This renames the VB_SOURCE variable to VBOOT_SOURCE in the build system,
providing increased clarity about what it represents.
Since the submodule itself is called "vboot", it makes sense to use that
name in full instead of a very shortened (and confusing) version of it.
Change-Id: Ib343b6642363665ec1205134832498a59b7c4a26
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15824
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Allow bootblock to get access to the static device tree like
other early stages. device_romstage.c was renamed to
device_simple.c to better articulate the usage since it's not
just being used in romstage.
BUG=chrome-os-partner:55357
Change-Id: I3d63d2754c737cc738c09a3e3b3b468362fb78d1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15837
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins)
Currently, on Intel Skylake the uCode binary is added to
CBFS based on the config option CBFS_EXTERNAL_HEADER. But
the entry is missing into the Firmware Interface Table, so
add it there.
BRANCH=none
BUG=chrome-os-partner:55403, chrome-os-partner:53077
TEST=built and verified FIT table has ucode entry.
Change-Id: I7dd7459ff7d2468f0aff66eb3ee9c2e3d7eda501
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15783
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Currently there are two sources for the final size of the
flash image. One is defined as a Kconfig variable
(ROM_SIZE) and the other can be provided in a user defined
flashmap.fmd. This patch will enable the usage of CONFIG_ROM_SIZE
in flashmap.fmd to define the flash size. In this way, the
Kconfig variable is the only source of information for the
flash image size. This way is optional.
Change-Id: Id5298e06d360aaa6d94f2b5a2ffa65e45919853e
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15219
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Build the <board>_checklist.html file which contains a checklist table
for each stage of coreboot. This processing builds a set of implemented
(done) routines which are marked green in the table. The remaining
required routines (work-to-do) are marked red in the table and the
optional routines are marked yellow in the table. The table heading
for each stage contains a completion percentage in terms of count of
routines (done .vs. required).
Add some Kconfig values:
* CREATE_BOARD_CHECKLIST - When selected creates the checklist file
* MAKE_CHECKLIST_PUBLIC - Copies the checklist file into the
Documenation directory
* CHECKLIST_DATA_FILE_LOCATION - Location of the checklist data files:
* <stage>_complete.dat - Lists all of the weak routines
* <stage>_optional.dat - Lists weak routines which may be optionally
implemented
TEST=Build with Galileo Gen2.
Change-Id: Ie056f8bb6d45ff7f3bc6390b5630b5063f54c527
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15011
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add ifwitool to list of tools to be built so that it can be used by the
build system.
Change-Id: Ifcfbfd87ad9b7ba3ea11cfbcf40894f3e0dae694
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15013
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The previous code harded the suffix of splash file as
"jpg". Actually, SeaBIOS supports both jpg and bmp.
Change-Id: I06c4b14aae7f75be3406652a94612b5f30ce91c2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/14932
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On modern x86 platforms like apollolake, pre-RAM stages verstage and
romstage run within the cache-as-ram region. Thus, we do not need to
pass in the --xip parameter to cbfstool while adding these
stages. Introduce a new Kconfig variable NO_XIP_EARLY_STAGES which is
default false for all x86 platforms. Apollolake selects this option
since it supports code execution with CAR.
Change-Id: I2848046472f40f09ce7fc230c258b0389851b2ea
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14623
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Previously, the XIP_ROM_SIZE Kconfig variable is used globally on
x86 platforms with the assumption that all chipsets utilize this
value. For the chipsets which do not use the variable it can lead
to unnecessary alignment constraints in cbfs for romstage. Therefore,
allow those chipsets a path to not be burdened by not passing
'-P $(XIP_ROM_SIZE)' to cbfstool when adding romstage.
Change-Id: Id8692df5ecec116a72b8e5886d86648ca959c78b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14625
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This fixes UPDATE_IMAGE builds, assuming that the fmap configuration in
the tree didn't change, at least as far as the CBFS regions are
concerned.
Another option would be to synthesize the fmap related files from the
existing image, but that comes with other issues (eg. what about
updating images old enough that there is no fmap?) and is more complex,
so keep it simple, stupid for now.
Change-Id: I036dab9f81f524f7d70bc0029b1ef835e6180a53
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14601
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Commit 785a31d67e
(Makefile.inc: Move payload code to payloads/) breaks the usage of
Linux kernel as payload. The reason for it is that cbfs-files-y is
evaluated before payloads/external/Makefile.inc is sourced and as a
consequence ADDITIONAL_PAYLOAD_CONFIG is empty when it is used for
payload options. That leads to missing command line and initrd for
the kernel which in turn leads to kernel panic when it boots.
To avoid it, move the code which adds payload to cbfs completely to
payloads/extranal/Makefile.inc. This way, ADDITIONAL_PAYLOAD_CONFIG is
set right before the payload itself is added to cbfs-files-y.
I have tested this patch with a Linux kernel as well as with SeaBIOS as
payload on mc_tcu3 and it works. If someone sees impact to other
payloads just let me know.
Change-Id: I7aad352f8b3fc1fdba1875b12648b07eba14e282
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14579
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There's an in-tree fmap.h, and the file generated by fmaptool is likely
used in tandem with it. To avoid problems, rename the generated file
(which so far isn't used).
Change-Id: I95dfde513a7f78677cf18ecd7ce8745e40af316b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14570
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Also, fix up the following driver subdirectories by switching
to the src/drivers/[X]/[Y]/ scheme as these are hard requirements
for the main change:
* drivers/intel
* drivers/pc80
* drivers/dec
Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14047
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Currently, the coreboot makefiles repeatedly run git to try to set
the KERNELVERSION variable and to fetch the submodules. This happens
three times for every build. By exporting a variable, we can catch
this on recursive makes and not run each of these steps again.
Change-Id: I85ab867b40e80c36bd94d48510ffe3252c6cf93f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14392
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
This should help catch cases where the AML is not correct.
Change-Id: I48efb9ed0b62b3e17dcf3045ef9c32d813a412bc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14340
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We already have the ability to add a pxe rom to cbfs, but it needs to be
configured and built separately.
This moves the existing Kconfig options for PXE from device/Kconfig and
the top level Makefile.inc to payloads, and adds the option to download
and build iPXE as part of the coreboot build process.
This configures the serial output of iPXE to match coreboot's serial
port configuration by editing the .h files. iPXE doesn't give any
real build-time method of setting these configuration options.
Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14085
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Certain chipsets don't have a memory-mapped boot media
so their code execution for stages prior to DRAM initialization
is backed by SRAM or cache-as-ram. The postcar stage/phase
handles the cache-as-ram situation where in order to tear down
cache-as-ram one needs to be executing out of a backing
store that isn't transient. By current definition, cache-as-ram
is volatile and tearing it down leads to its contents disappearing.
Therefore provide a shim layer, postcar, that's loaded into
memory and executed which does 2 things:
1. Tears down cache-as-ram with a chipset helper function.
2. Loads and runs ramstage.
Because those 2 things are executed out of ram there's no issue
of the code's backing store while executing the code that
tears down cache-as-ram. The current implementation makes no
assumption regarding cacheability of the DRAM itself. If the
chipset code wishes to cache DRAM for loading of the postcar
stage/phase then it's also up to the chipset to handle any
coherency issues pertaining to cache-as-ram destruction.
Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14140
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add a few additional macros that can be used throughout the coreboot
makefiles.
tolower: returns the value in all lowercase
toupper: returns the value in all uppercase
ws_to_under: returns the value with any whitespace changed to underscores
Change-Id: Icd0e6586481d8f229af0e899e0c94ef7c5c672c3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14093
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On non-x86 platforms, coreboot uses the memlayout.ld mechanism to
statically allocate the different memory regions it needs and guarantees
at build time that there are no dangerous overlaps between them. At the
end of its (ramstage) execution, however, it usually loads a payload
(and possibly other platform-specific components) that is not integrated
into the coreboot build system and therefore cannot provide the same
overlap guarantees through memlayout.ld. This creates a dangerous memory
hazard where a new component could be loaded over memory areas that are
still in use by the code-loading ramstage and lead to arbitrary memory
corruption bugs.
This patch fills this gap in our build-time correctness guarantees by
adding the necessary checks as a new intermediate Makefile target on
route to assembling the final image. It will parse the memory footprint
information of the payload (and other platform-specific post-ramstage
components) from CBFS and compare it to a list of memory areas known to
be still in use during late ramstage, generating a build failure in case
of a possible hazard.
BUG=chrome-os-partner:48008
TEST=Built Oak while moving critical regions in the way of BL31 or the
payload, observing the desired build-time errors. Built Nyan, Jerry and
Falco without issues for good measure.
Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13949
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Builds with BUILD_TIMELESS=1 shall always give a bit identical output
for stable inputs. This should help verifying that resulting rom files
stay the same across commits that shouldn't change the outcome.
To be useful for builds that rely on 3rdparty/arm-trusted-firmware,
this needs a similar change there.
Change-Id: Ia0a22e3e79fbd0abbd2a9071ecbeef6541787a08
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13412
Tested-by: build bot (Jenkins)
Reviewed-by: Damien Zammit <damien@zamaudio.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This dependency wasn't called out before, and when building with enough
threads, the build would fail due to a collision trying to build
build/util/kconfig/conf.
Fixes this failure:
make[1]: execvp: build/util/kconfig/conf: Permission denied
/home/martin/git/coreboot/util/kconfig/Makefile:40: recipe for target
'oldconfig' failed
make[1]: *** [oldconfig] Error 127
Makefile:167: recipe for target 'build/config.h' failed
Change-Id: Ib78d36bab0ba469796d89877bbe6a61e05196e87
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13859
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This allows coreinfo to be added to CBFS as a 'secondary'
payload on x86 systems, to be loaded by the main payload
if desired.
Selecting this option, which defaults to no, builds the coreinfo
payload and adds it to CBFS as `img/coreinfo` which can then be
loaded by for example SeaBIOS or GRUB.
Change-Id: I52661d486823bc4bb215ce92dca118c9d2c2a309
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13728
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch ports the LZ4 decompression code that debuted in libpayload
last year to coreboot for use in CBFS stages (upgrading the base
algorithm to LZ4's dev branch to access the new in-place decompression
checks). This is especially useful for pre-RAM stages in constrained
SRAM-based systems, which previously could not be compressed due to
the size requirements of the LZMA scratchpad and bounce buffer. The
LZ4 algorithm offers a very lean decompressor function and in-place
decompression support to achieve roughly the same boot speed gains
(trading compression ratio for decompression time) with nearly no
memory overhead.
For now we only activate it for the stages that had previously not been
compressed at all on non-XIP (read: non-x86) boards. In the future we
may also consider replacing LZMA completely for certain boards, since
which algorithm wins out on boot speed depends on board-specific
parameters (architecture, processor speed, SPI transfer rate, etc.).
BRANCH=None
BUG=None
TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on
Oak to be about ~20ms faster (cutting load times for affected stages
almost in half).
Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13638
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- Add Kconfig and Makefile options to use U-Boot as a payload.
- Add Kconfig option for extra cbfstool command line arguments.
- Add Kconfig & Makefile option to load the payload as a flat binary.
- Add u-boot directory to .gitignore.
This is currently working for X-86 only.
Graphics worked in U-Boot correctly by initializing the VBIOS and
setting up a console mode.
Tested in QEMU and on Minnowboard Max. Got into U-Boot, have not
booted an OS yet.
Change-Id: Ia122a4ad7cd7d96107c1552b0376c8106ca8fb92
Signed-off-by: Martin Roth <martinroth@google.com>
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/12714
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Add the doimage sources in util/marvell
- Add dependency in root makefile
- Add dependency in makefile for armada38x soc
BUG=chrome-os-partner:47462
TEST=emerge-cyclone coreboot
BRANCH=tot
Change-Id: I81b30e0865cbd619a41659c3f2819ad3bafc5f24
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4b2a990150580e0b879a346ed8b71b3765b66bab
Original-Change-Id: I7e89b5e96206fde97ce69c296850122fd6c858f9
Original-Signed-off-by: Kefei Yao <kfyao@marvell.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/318046
Original-Commit-Ready: Kan Yan <kyan@google.com>
Original-Tested-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org>
Reviewed-on: https://review.coreboot.org/13137
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We tested for the presence of .git/modules/3rdparty, which always exists
now because of .git/modules/3rdparty/chrome-ec. Test for .../hooks
instead since that's the actual location for the later activities.
Change-Id: Id5de9f850413c2bc3525faa6cc549641304c3d47
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/13650
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
files_added is for rules that need to run after all CBFS processing is
finished, such as SoC-specific postprocessing of the image, or for
vboot, to sign the RW regions (that contain CBFS that shouldn't change
afterwards.)
Change-Id: I830aa0c93429f4971cd68e4358faba5c206c0038
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13557
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Add a target at the end of the build that can be used to run additional
scripts or additional targets after coreboot.rom is built.
- Source a site-local Kconfig file to allow site-specific configuration.
This eliminates the need to add a hook for a script at the end of the
build because you can add one yourself in site-local.
Example site-local/Makefile.inc:
build_complete::
ifeq ($(CONFIG_SITE_LOCAL),y)
echo "Running additional steps in site-local"
# run some script here to make my build unreproducible.
endif
.phony: build_complete
Example site-local/Kconfig:
menu "site-local"
config SITE_LOCAL
bool "site-local enabled"
help
Enable my site-local configuration to do stuff.
endmenu
Change-Id: Id4d1e727c69b5cdb05e7d52731bbb1d1e201864a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13413
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
There is a lot of potential to completely get rid of Makefile
and keep everything in Makefile.inc, but for now this declutters
the main Makefile.inc.
Change-Id: I653313c74207f955514c036c81efcbfd988827c9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13518
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The ARM target can compile for much more than just v7a.
Change-Id: Ia4f67abcffdfe9c56c5d1848c75dfea83755e755
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13517
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
By implementing a more complex options-for-region function, special
needs for certain files in certain regions can be dealt with.
Change-Id: I2e1e08d5357b717011c41675f76908bf2319f91d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13505
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Add files to fmap regions one-by-one, so we can modify options
per-file-per-region.
Change-Id: Ic3ff5a4e563796c9fdd5705236aef37c883abf5e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13504
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
When adding the cbfstool remove requirement of the UPDATE_IMAGE path to
cbfs-add-cmd, prebuil[dt]-files become identical in both cases.
Change-Id: I80faaf1c83368b9dd00a9f247bf89e6d596be996
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13503
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Also drop the second argument to cbfs-add-cmd because it's not needed
anymore.
Change-Id: Ie01d73f6b2aff09caccc397f72d6d8065624aebe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13502
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
And not in the global context.
Change-Id: Ife7394b1343663456c24316df6a07d883adb9ee9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13500
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
They used to be chained into a single make shell invocation but now
they're individual commands, which makes them easier to manage.
Change-Id: I22394fd31989d5180790818153f466c0e7ebbedd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13499
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of tagging object files with .<class>, move them to a <class>
directory below $(obj)/. This way we can keep a 1:1 mapping between
source- and object-file names.
The 1:1 mapping is a prerequisite for Ada, where the compiler refuses
any other object-file name.
Tested by verifying that the resulting coreboot.rom files didn't change
for all of Jenkins' abuild configurations.
Change-Id: Idb7a8abec4ea0a37021d9fc24cc8583c4d3bf67c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13181
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
A quote was missing in a command.
Change-Id: I04148538007e5c450c6be113aab8a7fbb534db26
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reported-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13474
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Instead of just failing with the statement:
'mv: cannot stat ‘coreboot.rom’: No such file or directory',
fail with an error that helps the user understand the issue.
Change-Id: Ie693d45710f599991514e0803a7c444636e473c9
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13065
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
We can't just copy archives around as they may be thin archives which
contain relative paths. Using ar to create another thin archive should
result in the same archive with fixed paths.
Tested by verifying that the resulting coreboot.rom files didn't change
for all of Jenkins' abuild configurations.
Change-Id: Ic5743da2f4b5eb246fafd02181d66c5d40e7f00c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13179
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Help figure out which 'else' or 'endif' is attached to which 'if'.
Change-Id: I5ad068eb7c69f2dae57856f0e886f786563f7783
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13064
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Add a new Kconfig variable to enable the generation of
position and alignment attributes for cbfs files which
has constraints on this parameters.
In addition, modify Makefile.inc to support that option.
Change-Id: Ibd725fe69a4de35964bdb2dde106d9a7c37ffb47
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12968
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Setup an initial rule to make use of the updatable CBFS regions in fmap.
Change-Id: I1fe1c6e7574854b735760c85590da6e297f6e687
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13060
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Using the regions-for-file function, the build system can now declare
which (CBFS formatted) fmap region(s) a file should end up in.
The default is to put them in the regular COREBOOT region, but more
complex boot schemes (eg. vboot or fallback/normal) can use the function
to implement suitable policies.
Change-Id: I5e2e6b8e8759fda2cfb0144d5b998ba3e05650c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13039
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
When coreboot is pulled in as a submodule, the .git "folder" is a file,
not a folder. Use the '-e' test instead of '-d' to allow for that.
Without this change, build.h will contain:
#define COREBOOT_VERSION "coreboot-unknown"
Change-Id: Ia141371cc892a0817d3566dc37ed0401675ad8d8
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13061
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Regions marked "(CBFS)" in the fmd weren't actually initialized with a
CBFS structure, just the default CBFS region (COREBOOT).
This made cbfstool add (etc) fail on those regions, so explicitly
initialize all those regions.
Change-Id: Ib321fa73cd2ecc8057b52408521fd214d6df7f2e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13059
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In some occasions, Coreboot may need to include the header file from
3rdparty directory. By adding 3rdparty directory to Coreboot include
path, we can include 3rdparty header file directly.
BRANCH=none
BUG=none
TEST=build pass
Change-Id: I8ed68bd330eae1211736a91b213c5dc0af2f7fa9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d6a86b3488ebbc9d8f5f46e922106b71034e7127
Original-Change-Id: Ib8e9f059f88a8c6767f872af8760e91186ae5ec3
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/315021
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12929
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
This is an initial check for the coreboot toolchain versions. It
currently checks binutils, gcc, clang, and iasl. The other components
are slightly more difficult to test, but should follow on shortly.
If the toolchain is not the correct version, make will halt with
an error.
Change-Id: I41daf6c4545c01dc21231d78fd081bbcf77c4726
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12846
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
The dsdt file moved from the mainboard directory to the top level of
the build directory. Remove it from the new location when cleaning.
Change-Id: If9f72c78e5c03e0db384b3181c169aa2ecbb5c18
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12822
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Provide a common routine to hash the contents of a cbfs
region. The cbfs region is hashed in the following order:
1. potential cbfs header at offset 0
2. potential cbfs header retlative offset at cbfs size - 4
3. For each file the metadata of the file.
4. For each non-empty file the data of the file.
BUG=chrome-os-partner:48412
BUG=chromium:445938
BRANCH=None
TEST=Utilized in chromeos cros_bundle_firmware as well as at
runtime during vboot verification on glados.
Change-Id: Ie1e5db5b8a80d9465e88d3f69f5367d887bdf73f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12786
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
- make sure CONFIG_CBFS_SIZE is lowercase for fmaptool.
- Regenerate the fmap.fmd file when config.h changes.
- Print the fmaptool step when doing the build.
Change-Id: Ib518ed469d9e39eb41c81f7b19480c7789067d2d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/12806
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
These files need to be added to cbfs-files after PAYLOAD_CONFIG
and PAYLOAD_VERSION have been defined. Where they were before,
they didn't get added to the final build.
Change-Id: Ib1b230f9eb72a8c1710ef473a9f24c0fb7ec6e17
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12751
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The dsdt dependency file is created, but wasn't being used to determine
whether or not to update the dsdt file. If it's present, include it
into the makefile so dsdt.aml gets rebuilt if any of the depencencies
change.
Change-Id: I76bc22541c6b9740841bda891a5b88030cb949cd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12699
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We still add a master header for compatibility purposes, and the default
layouts don't cover anything non-coreboot (eg. IFD regions) yet.
The default layouts can be overridden by specifying an fmd file, from
which the fmap is generated.
Future work:
- map IFD regions to fmap regions
- non-x86: build minimalistic trampolines that jump into the first cbfs
file, so the bootblock can be part of CBFS instead of reserving a
whole 64K for it.
- teach coreboot's cbfs code to work without the master header
- teach coreboot's cbfs code to work on different fmap regions
Change-Id: Id1085dcd5107cf0e02e8dc1e77dc0dd9497a819c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/11692
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Jenkins keeps failing trying to build AMDFWTOOL because it's being
built by multiple platforms at the same time. Putting it into the tools
list and having it built ahead of time should fix this problem.
Change-Id: I2a8308036135729f0ed19502f3e039aca009b3f3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12647
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Including the help targets in the list of NOCOMPILE targets means they
can run even if the toolchain is mucked up. Since they contain info on
building the toolchin, this is useful.
- Separate the three current parts of the help target into individual
components: help_coreboot, help_toolchain, and help_kconfig. This is
mostly for the help_toolchin target which will be printed out by
toolchain.inc.
Change-Id: I365d95fd63e22bddd122fb1fede6f04270e03d63
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12542
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We don't need COREBOOT_ROM_DEPENDENCIES anymore because the dependencies
are taken care of by the cbfs-files mechanism. REFCODE_BLOB also doesn't
need to be an explicit dependency.
Change-Id: I3f32cce79683e57a174724179bc2ac59a8cdda94
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12648
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
The config file added to CBFS is the short version created by defconfig.
The build system tried to add a header describing the version for quite
a while now, but failed because it wrote to the file, then had kconfig
overwrite it with the config data.
While at it, rely on build.h and its version information instead of
calling git manually.
Change-Id: I5e4d6c857594a55432c05bf1480973fc950f4d4a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12558
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Change-Id: I167f570957ca7eaf71fc31e1bd84b9bbad0683eb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12551
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
coreboot.pre1 was generated then copied into coreboot.pre, now without
any additional manipulation. Get rid of that extra step.
Change-Id: I138567cadbc2fa1a6b6c988e34bdaae0e92d5554
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12550
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
verstage, romstage, and payload can be added through infrastructure now.
Change-Id: Ib9e612ae35fb8c0230175f5b8bca1b129f366f4b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12549
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Space is commonly used as separator in make variables, so escape them
as * (which should be reasonably uncommon in file names and cbfstool
options alike to not be a problem).
Change-Id: Ia77b5559841b5eae3aa1c0c0027f2e7fb882ea2f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12548
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This enables adding romstage, verstage, and payload, that may need
additional options (eg. for XIP or for linux initrd arguments) to be
added with the build system infrastructure instead of manual rules.
Change-Id: Ifde4ec3ca4ab436aca9b51a3c2cc478ed493fbfb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12547
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
So far the build system only added files starting with CBFS_PREFIX/ in
the UPDATE_IMAGE configuration, but there are a number of files that
exist in the global namespace (eg. config, revision, but also
cmos_layout.bin).
Now, existing files are removed if necessary.
Change-Id: I977ff85fe18115c84268103be72e91ca854e62a4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12581
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: BSI firmware lab <coreboot-labor@bsi.bund.de>
Most of the toolchain build targets already ran clean-for-update, but
there were a few that didn't. Add the clean to those targets.
Change-Id: I7faad32ac8bb1815e0c58e7d142ca2dbfc877896
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12571
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of having to remember to strip the quotes everywhere so that
string comparisons (of which there are a few) match up, do it right at
the beginning.
Fixes building the image with a .config where CONFIG_CBFS_PREFIX
contains quotes.
Change-Id: I4d63341cd9f0bc5e313883ef7b5ca6486190c124
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12578
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
That allows this special case to become a normal cbfs-files instance,
too.
Change-Id: I896ffebe4cec64c9c11605b4f09c7790e5419928
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12539
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Use cbfs-files-y to deal with some of the manually added cbfs files,
providing more structure to that part of the build.
Change-Id: Iee1b8fec81dfa5e5f0e55637a62e5f69bd0257ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12538
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add files with fixed positions, then files with alignment requirements
and finally those that can reside everywhere to prevent the most obvious
collisions.
This isn't perfect yet (the "aligned" group may need some additional
sorting), but should avoid the worst instances ("free floating" files
allocating space required by fixed location files, for example).
Change-Id: I871e1a92ad90e63fc4e299fe1b228b4b00a35930
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12536
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Add specific build targets for IASL & CLANG and help for those targets
- Consolidate tool target .PHONY entries
Change-Id: If2960d75310495d9e486b3a08808463a2ff0c644
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12541
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Currently running 'make help' just gives help for the kconfig targets.
This adds help for common coreboot and toolchain targets. It stops
printing some of the less common kconfig targets, but still leaves
them in the makefile as documentation.
Change-Id: I2a00fcbc06f05dc4029a91f3dff830c19e4d1329
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12458
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We've actually got more warnings now than when I first tested IASL
warnings as errors. Because of this, I'm adding it with the option
to have it disabled, in hopes that things won't get any worse as we
work on fixing the IASL warnings that are currently in the codebase.
- Enable IASL warnings as errors
- Disable warnings as errors in mainboards that currently have warnings.
- Print a really obnoxious message on those platforms when they build.
***** WARNING: IASL warnings as errors is disabled! *****
***** Please fix the ASL for this platform. *****
Change-Id: If0da0ac709bd8c0e8e2dbd3a498fe6ecb5500a81
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10663
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Only build IASL once for the 'all' targets instead of once for each.
- Change the control of what gets built from different targets to
variables on the build line.
- Clean up and correct the list of phony targets
- Don't keep the temporary files around while building all. This
takes up a lot of space. If it's desired behavior, add
BUILDGCC_OPTIONS=-t on the make command line.
- Add comments about CPU= and BUILDGCC_OPTIONS= variables
- Add KEEP_SOURCES option
Change-Id: I7752974e249f25717b42be25a841c69af84d5c69
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12300
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Combine all needed AMD firmware into one single firmware, which going to
be added as one single CBFS module.
Change-Id: Ib044098c1837592b8f7e9c6a7da4ba3a32117e25
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12419
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add intelvbttool to list of utilities to be build tested by the build
servers.
Change-Id: Id75724726778fd939fb7497f5b33a3d5d58124fd
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/12085
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It's been decided to only support ARM Trusted Firmware for
any EL3 monitor. That means any SoC that requires PSCI
needs to add its support for ATF otherwise multi-processor
bring up won't work.
Change-Id: Ic931dbf5eff8765f4964374910123a197148f0ff
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11897
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
There has been a concerted effort to clean up coreboot's microcode
handling that has included a move away from coreboot-specific
microcode file collections. As a result, the ability to specify
a single microcode file to be added to the image is of less utility
than before.
NOTE: This patch remove the built-in external microcode feature,
however the user can still specify no microcode during build and
manually add the correct microcode file(s) to the CBFS image after
the build is complete.
Change-Id: Ifea94c21e531a74953f5a0e2f489378c20ef3b5c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11903
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When the memlayout framework was initially developed in the Chromium OS
tree, the accompanying build system changes unified handling for all
file types (including .ld and .asl) in a single template. This had the
advantage that compiler invocation options pertaining to the build
system itself could be centralized in a single place.
On upstreaming this was reverted for some reason, keeping the old
special handling for ASL files and writing a custom template for LD. The
duplicated compiler invocation code for the latter was missing the -MMD
flag required for dependency tracking. It was also missing at least one
$-sign which causes the $(<class>-ld-ccopts) variable to be evaluated at
the time it's parsing the template generator (before the subdirectory
pass). This should not cause any issues with current code, but all the
ccopts variables were meant to be evaluated after the subdirectory pass
(so things like archs and SoCs can manipulate them if needed), so this
patch fixes both issues.
BRANCH=None
BUG=None
TEST='make; touch src/soc/.../memlayout.ld; make' re-links all stages
and includes the changed symbol addresses from the new address map.
Change-Id: I4be458112908380268229b3220cfa0062add5c5d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e8a36f994ef6a819ded7bf6b39b1e0fce8e52279
Original-Change-Id: If2310b46b53d888975cb2113edce20a896be39ef
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/303054
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12139
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
The possibility of adding a bootsplash image to ROM should be independent
from VGA_ROM_RUN and VESA menuconfig options.
For example, the stored image could be saved in CBFS not for coreboot
but for later use in SeaBIOS.
Change-Id: I3a0ed53489c40d4d44bd4ebc358ae6667e6c797f
Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru>
Reviewed-on: http://review.coreboot.org/12129
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Display what's happening to the console as well as logging to the
junit.xml file.
- Log the clean in the junit.xml file so if it fails it doesn't just
appear to not have run the test.
- Run both clean and distclean (if distclean exists and runs clean,
this still only runs clean once) so that if distclean doesn't exist
the clean still happens. Don't stop the build if the clean step
fails in case there's no distclean in the util makefile.
- Run the util builds multithreaded. This saves a couple of seconds
and helps find dependency issues that might not be seen if building
single-threaded.
Change-Id: If895295c83faba98661b7c925b65fd436e06b834
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12121
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This way, commit differences will be easier to read. Also sort the list
lexicographically.
Change-Id: I4ce3ac9018a3fddf5e30d7c1ac0c57090fac1d3d
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/12084
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of adding code to generate the junit.xml file for jenkins to
each of the util makefiles, add it once to the top level Makefile.inc.
Create a list of tools to run the test on.
Add nvramtool and inteltool to the list of utilities tested.
Note that the util builds depend on implicit rules, so MFLAGS and
MAKEFLAGS have to be cleared to get the builds to work.
Change-Id: Id7ee5ea41ce3bf4a40fb50942ae785bb838fa639
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11910
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This will run the lint-stable scripts on jenkins to block a commit with
obvious and known errors.
It runs in under a second on my system, so shouldn't contribute to any
real delay on jenkins.
Change-Id: I6ff3468ec29dc4ccd0c115f2c26e26b291c507df
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11892
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In preparation for adding junit xml to the lint tests, move the
script out of Makefile.inc and into its own file.
Add a copyright, usage, and error checking that was not needed
inside the Makefile.
Change-Id: I32bebc6a5f1f6fa652812c8a014d84006e2e6c8a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11890
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of renaming the junit filename, send abuild the desired
name on the command line.
Change-Id: I779bc180343bd549908750d7128bedbab7f36266
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11879
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
To support x86 verstage one needs a working buffer for
vboot. That buffer resides in the cache-as-ram region
which persists across verstage and romstage. The current
assumption is that verstage brings cache-as-ram up
and romstage tears cache-as-ram down. The timestamp,
cbmem console, and the vboot work buffer are persistent
through in both romstage and verstage. The vboot
work buffer as well as the cbmem console are permanently
destroyed once cache-as-ram is torn down. The timestamp
region is migrated. When verstage is enabled the assumption
is that _start is the romstage entry point. It's currently
expected that the chipset provides the entry point to
romstage when verstage is employed. Also, the car_var_*()
APIs use direct access when in verstage since its expected
verstage does not tear down cache-as-ram. Lastly, supporting
files were added to verstage-y such that an x86 verstage
will build and link.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using separate verstage.
Change-Id: I097aa0b92f3bb95275205a3fd8b21362c67b97aa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11822
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When a separate verstage is employed the verstage file
was just being added through the cbfs-files mechanism.
However, that doesn't allow one to specify other flags
that aren't supported that an architecture may require.
The x86 architecture is one of those entities in that
it needs its verstage to be XIP. To that end provide
a mechanism for adding verstage with options.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using his mechansim on x86.
Change-Id: Iaba053a55a4d84d8455026e7d6fa548744edaa28
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11819
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
For vboot1 there was an rmodule that was loaded and ran to
do the firmware verification. That's no longer used so remove
the last vestiges of VBOOT_STUB.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built glados.
Change-Id: I6b41544874bef4d84d0f548640114285cad3474e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11817
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Building coreboot with the SeaBIOS or FILO payload selected, their config and
revision are added to CBFS.
```
Creating out/bios.bin.elf
CBFS coreboot.rom
PAYLOAD payloads/external/SeaBIOS/seabios/out/bios.bin.elf (compression: LZMA)
CONFIG .config
REVISION build.h
CONFIG payloads/external/SeaBIOS/seabios/.config
REVISION payloads/external/SeaBIOS/seabios/out/version.c
CBFSPRINT coreboot.rom
```
Align the path of the payload config by removing one space.
Change-Id: Icbb139c28b9dcb8d31989a48fa4fbe4a9b088972
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11710
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Martin Roth