Support Kukui rev 2 panel (via SSD2858).
BUG=b:129299873
BRANCH=none
TEST=Build as Kukui and boots on Rev 2 unit.
Change-Id: Icc16c4297eb3c6b6a4770a36661a2e3cab418048
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Declare the following panels for Krane:
- BOE TV101WUM-NL6
- AUO KD101N80-45NA
The edid info and init command are from:
https://crrev.com/c/1565758
BUG=b:129299873
BRANCH=none
TEST=Builds krane image and boots properly.
Change-Id: Id19c6c2b4c1c728c39aa26301adf7d6fb5046403
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Many devices in Kukui family will be using MIPI panels, which needs
hard-coded EDID and initialization commands. And because each device may
have its own layout and ID, there should be very few devices sharing
same panel configuration. As a result, we want to put panel data (EDID
and init commands) into board-specific modules, provided by
`get_panel_description` function.
The panel numeric ID is identified by ADC 2, and is currently available
as higher 4 bits of sku_id(). After ID is retrieved, the
get_panel_description should return a reference to the EDID and table of
init commands. The default implementation is to simply return NULL, and
the data for real devices should be provided by panel_*.c in further commits.
BUG=b:80501386,b:117254947
BRANCH=none
TEST=boot correctly on Kukui
Change-Id: I19213aee1ac0f69f42e73be9e5ab72394f412a01
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The MT8183 display serial interface (DSI) is based on MIPI
Alliance Specification, supporting high-speed serial data
transfer between host processor and peripheral devices such
as display modules.
DSI supports both video mode and command mode data transfer
defined in MIPI spec, and it also provides bidirectional
transmission with low-power mode to receive messages from
the peripheral.
Reference: MT8183 Application Processor Functional Spec,
6.7 Display Serial Interface (DSI)
BUG=b:80501386,b:117254947
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Ic413f524ca0b36f0b01f723a71fe9745e2710cd2
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
For systems with real MIPI panels (8173/oak was using PS8640 eDP
bridge), we have to send DCS commands to initialize panel.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: Ie7c824873465ac82a95bcb0ed67b8b9866987008
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34773
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The video timing should be based on PHY timing. Some values can be
ignored on 8173 because of fixed values in PHY but should be calculated
for newer platforms like 8183.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: Id3ad2edc08787414a74188f5050460e98222caf4
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The PHY timing should be calculated by data rate (Mbps). However for
8173 some values were hard-coded so we want to introduce a new
mtk_phy_timing structure and a weak function mtk_dsi_override_phy_timing
that allows per-SOC customization to apply PHY timings.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: I1176ca06dda026029ff431aca7f9e21479eed670
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add code to read SPD data, parse it and save into SMBIOS table. This is
implemented for socketed DDR4 chips only. For soldered-down memory this
is not implemented and probably won't be ever needed.
TEST=tested on OCP Monolake mainboard, and found dmidecode -t memory to
work. The stack has also been tested on an out-of-tree board.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: I1162eb4484dab46f1ab9fe3426eecc4d9378e8e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Add ability to decode basic fields of DDR4 SPDs and produce SMBIOS table
17. XMP, schemas, extended field parising is totally not yet implemented.
Also, put CRC function used in DDR2, DDR3 and DDR4 ina common file.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: If3befbc55cf37e1018baa432cb2f03743b929211
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Add read/write functions to hook it up with existing SPD retrieval code.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: I9f5993dc795badf72751a4e6c9d974119a653e30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34679
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IMC is found on certain Xeon processors. On such platforms SPDs are not
connected to SMBus on PCH but to dedicated IMC-owned pins. The purpose
of this driver is to expose access to the i2c/smbus controller associated
with IMC.
Datasheet used: Intel Xeon Processor D-1500 Product Family, Volume 2,
reference 332051-001
This driver is largely based on i2c-imc.c Linux driver.
https://lwn.net/Articles/685475/
TEST=single/double reads and single writes on Xeon-D1500.
Hardware: Open Compute Project Monolake platform.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: Idbcda1c2273b9a5721fcd9470b4de182192779e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34678
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to use internal UART it needs to 'enabled'. This is normally done
by FSP. However sometimes internal UART is needed before FSP is invoked.
TEST=check if printk() show up in early romstage. Tested on OCP Monolake.
Tested on out-of-tree mainboard to see if UART on LPC still works.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: I88a7b1a38abf9a09137f6dd75a5a9dee104daaca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34683
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds support for allowing devices to provide a
"compatible" property string that can be used when _HID is set to
PRP00001. This is used to allow Linux kernel drivers to match the
device to appropriate driver based on the OF-style compatible
string.
Reference:
https://www.kernel.org/doc/Documentation/acpi/enumeration.txt
BUG=b:129162037
TEST=Verified that atmel touchscreen gets enumerated correctly on
kohaku using PRP0001 and compatible string.
Change-Id: I8a306854c67ab2f056ea8774df46599ef0c55761
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
This change updates the Atmel touchscreen ACPI node to use PRP0001 as
_HID to allow OF-style compatible string matching for enumeration.
Reason for this change: Atmel touchscreen driver in Linux kernel looks
for "compatible" property to decide if it is okay to attach to the
device. This check seems to be a protection against old firmware in
the field that do not have the right properties.
BUG=b:129162037
TEST=Verified that touchscreen works on Kohaku.
Change-Id: I6d027f8533494e903efd1da8da1fa273a97fe9b2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
The default is DMIC0 on, but Kohaku is also using DMIC1
BUG=b:133282247
BRANCH=None
TEST=arecord -D hw:0,1 -r 48000 -c 4 -f s32 4dmic.wav
make sure 4 channels recording work
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Change-Id: I2dd573e1634516bcf9876bedb92b7d9148bb0e6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34692
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We mostly discourage typedefs for structs. Hide
smm_save_state_area_t in the single file that still
uses it.
Change-Id: I163322deab58126cc66d416987eaf7dca9ce8220
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Any platform should need just one of these.
Change-Id: Ia0ff8eff152cbd3d82e8b372ec662d3737078d35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34820
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The only platform-specific difference in mtk_dsi_phy_clk_setting is how
to configure MIPI TX because those registers (and logic) are quite
different across different SOCs.
The calculation of data rate is actually the same so we should isolate
it and move to common, and rename mtk_dsi_phy_clk_setting to a better
name as mtk_dsi_configure_mipi_tx.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: I894dc2c4c053267debf5a58313b2bb489bcf5f3a
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The 'bpp' was referred to both 'bits per pixel' and 'bytes per pixel' in
MTK DSI driver and should be corrected. By this change we now always
consider 'bpp' as 'bits per pixel', and rename the variables for other
cases.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: Ibd405220b73859e5592c68f498af07eef8d7edbc
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34770
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The DSI initialization is almost the same for 8173 and 8183, so we want
to move most of common functions into common/dsi.c.
The major board-specific functions left are:
- reset (controller register has different format)
- pin_drv_ctrl (8183 does not need this)
BUG=b:80501386,b:117254947
TEST=make -j # board=oak (mt8173)
Change-Id: I8d4369a3c84db551287a9c9d1b22f552c5f7518d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34769
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SiFive's ZSBL has initialized flash, but only 16MB of space is available.
1. add code for spi
2. add code to map flash to memory spaces
Change-Id: I106688c65ac7dd70be7479dc4691797b700682d9
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Do this for consistency with remaining cpu/intel sources.
Also wipe out some spurious includes.
Change-Id: I1adde58966eae9205703b87e7aa17c50e5791a85
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
It was originally inverse of romcc-built romstages on x86,
and is currently always true on x86.
Change-Id: I65fa6b3ce8a86781724bbf08f5eadee4112667c4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It is easier to track CAR_GLOBAL_MIGRATION which is
the approach to be deprecated with the next release.
This change enforces new policy; POSTCAR_STAGE=y is
not allowed together with CAR_GLOBAL_MIGRATION=y.
Change-Id: I0dbad6a14e68bf566ac0f151dc8ea259e5ae2250
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Almost all platforms force it on. Make it enabled by
default but under user control to optionally disable it.
Change-Id: I6b0f19c8bfd6ffed93023d57a1d28ca6acc06835
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Build error on missing vb2ex_printf() in bootblock stage
Add the file vboot_logic.c which contains the missing vb2ex_printf().
BUG=N/A
TEST=Boot Linux 4.20 and verify logging on Facebook FBG-1701
Change-Id: I3f649f3faf1e812d592e4981bc75698e2cad1cc8
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
The Kohaku V24 schematic adds two additional temperature sensors
to the EC. Add these to the DPTF tables.
Cq-Depend: chromium:1742914
BRANCH=none
BUG=b:138578073
TEST=Rebuild EC and BIOS, look for new thermal sensors in kernel.
1. Build EC
``cd ~/trunk/src/platform/ec``
``make -j BOARD=kohaku``
2. Program EC
``./util/flash_ec --board=kohaku``
3. Reboot device
4. Rebuild BIOS
``cd ~/trunk/src/third_party/coreboot``
``FEATURES="noclean" FW_NAME=kohaku emerge-hatch chromeos-ec depthcharge
vboot_reference libpayload coreboot-private-files intel-cmlfsp
coreboot-private-files-hatch coreboot chromeos-bootimage``
5. Use flashrom to program the BIOS
6. Reboot device
7. Log into the root console (ctrl-alt-F2 or servo)
8. Example thermal sensor information
``grep . /sys/class/thermal/t*/type``
Look for "TSR0" through "TSR3" in the output.
Change-Id: Ib8f38beae6392855927ce1249c229d7a114c72b2
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34765
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Oops, I missed this in the last CL.
The pin needs to be configured as owned by GPIO, so that the kernel
driver can bind it with an IRQ.
BUG=b:139165490
TEST=Ensure kernel nastygram about inability to claim the IRQ is gone
Change-Id: I26c08d75d8b4e3b834db6e90868239899605fa5b
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In general, third party code (such as vboot) doesn't know what the
underlying types are for the integers in <stdint.h>, so these macros are
useful for portably printing them. Of these definitions, coreboot so far
has only used PRIu64 (in one place), which isn't needed anymore since we
know what the underlying type of a u64 is.
Change-Id: I9e3a300f9b1c38e4831b030ff8af3fed2fa60f14
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
HDA is not configured.
Enable SOC_INTEL_COMMON_BLOCK_HDA_VERB to configure the HDA using
cim_verb_data[] table.
BUG=N/A
TEST=Boot Embedded Linux 4.20 on Facebook FBG-1701
Change-Id: I9bb542091ad200833894431f5b840f48dd388173
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34655
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The <inttypes.h> header currently does nothing but include the
definitions from <stdint.h>, so let's #include that directly instead.
Change-Id: I9d83ad37d0d7300a093001596ce3f0b3830c5701
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Change-Id: Id8fa880357124b620bde8884949bd8ffff7d0762
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Change the stoneyridge definitions into picasso. The named 0 and 1
buses are controlled by the PSP and not directly accessible by host
firmware. I2C4 operates only in slave mode so is not added to to
the bus clear-after-reset sequence.
The I2C controller is fundamentally the same as on Stoney Ridge so
the ability to clear a potentially jammed bus is still required.
Program Picasso's new pad control registers in the MISC AcpiMmio
space according to the recommended settings.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ibbc5504ebc36654e28c79fe3ae17cc0d9255118f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Change the Stoney Ridge ID to Picasso. Rename family 15h. Get the
number of cores/threads from CPUID as all D18 registers are new.
Change-Id: I44c45db637897f6caf320032c9f79a3a1ab4d6c9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Picasso has only a single 48M output. Simplify the setup function.
Note that while the feature is similar to older products, the register
definition and Enable bit has changed.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Iebaf5219fdcd3145a4faf906f656a7fbdc7e0c36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Remove the Family 15h device. It's not in Family 17h documentation
and isn't detectable with HDT.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ifa9c06f78f39a3ec3b555d4ecc542172cd44a0b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33990
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove the scratch register indicators. Per AMD, AGESA no longer
uses these. Use a new IO register to determine whether a warm
reset should occur.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I0ff7935004b3d1ac5204d3ef575cfa98116a57fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33989
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make the definitions match Picasso's definitions. Add/remove pins
that differ from stoneyridge, update GEVENTs for the FCH mapping.
Change-Id: I59f958151f27ed4ca0eb1a87ade6102eec1e5061
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
One case slipped past the review and rebase of 733c28fa42
(soc/intel/{cnl,icl}: Use new power-failure-state API).
Change-Id: Id01df30d10e202e9672bf5be799a84f4f202fe24
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34812
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Hung-Te Lin