Change GPP_C10 from pltrst to deep to meet the warmboot power sequence.
BUG=b:146935222
TEST=measure WWAN power sequence is meet spec
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia1513ed38fbc1c99a10a5fa531a78cc92a3ebfc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Enable the dGPU on the Lenovo T440P. It uses the same code (roughly) of
the T430S. By default, it is set to be disabled however it can be
enabled via the nvram option enable_dual_graphics. Removed hybrid graphics
options too as they are not valid for the T440p. Tested on a T440P with
Ubuntu 18.04.4 with Kernel 5.3.0-29 (successful). Tested on same machine
with Windows 10 1909 (machine check exception bluescreen).
Change-Id: Idf8c2c0d1ae34bda8736448d3e350396e3cf7a93
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Both versions are correct, but especially for one liners indenting them
with four spaces instead of using ``` blocks helps readability of the
source file.
Change-Id: Ie2543c8c4cccefd74e966f784e651ed7dc3a9252
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38720
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since most of Bloog series SKUs need to disable DRRS support.
If Bloog and Unprovisioned SKUs then return vbt.bin to enable DRRS support,
return vbt_blooguard.bin for other SKUs to disable DRRS support.
Bipship follow blooguard to disable DRRS support.
BUG=b:148892903, b:147021309
BRANCH=octopus
TEST=emerge-octopus coreboot chromeos-bootimage
check i915_drrs_status shows DRRS supported NO when SKU ID is bipship.
Change-Id: I61f12d4ddea17a05255751fde2a5ce822dd2e782
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add the capability to update the Flash Descriptor directly instead
of raising a Segmentation Fault. In this way it will be possible to
add a Kconfig options to modify the ifd descriptor at build-time.
Change-Id: Id3db09291af2bd2e759c283e316afd5da1fb4ca7
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Below changes have been implemented in send_heci_reset_req_message():
1. Modify return values to align with other functions in the same file.
2. Add additional logging.
3. Replace macro definitions of reset types with ENUM.
4. Make changes to caller functions to sync with new return values.
5. Rename send_heci_reset_req_message() to cse_request_global_reset().
Test=Verified on hatch board.
Change-Id: I979b169a5bb3a5d4028ef030bcef2b8eeffe86e3
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37584
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Below changes are implemented:
1. Fix typos.
2. Rename 'padding' field of hmrfpo_get_status_resp struct to
'reserved' to match with ME BWG Guide.
3. Add documentation for HMRFPO Status.
TEST=Build and boot hatch
Change-Id: I4db9bdf7386c48e17ed0373cf334ccff358d1951
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Below changes are implemented:
1. Move HFSTS1 register definition to SoC since HFSTS1 register definition
is specific to a SoC. Moving structure back to SoC specific to avoid
unnecessay SoC specific macros in the common code.
2. Define a set of APIs in common code since CSE operation modes and
working states are same across SoCs.
cse_is_hfs1_com_normal(void)
cse_is_hfs1_com_secover_mei_msg(void)
cse_is_hfs1_com_soft_temp_disable(void)
cse_is_hfs1_cws_normal(void)
3. Modify existing code to use callbacks to get data of me_hfs1 structure.
TEST=Build and Boot hatch, soraka, tglrvp, bobba and iclrvp boards.
Change-Id: If7ea6043d7b5473d0c16e83d7b2d4b620c125652
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This CL has changes that allow us to enable a configurable
ramstage, and one change that allows us to minimize PCI
scanning. Minimal scanning is a frequently requested feature.
To enable it, we add two new variables to src/Kconfig
CONFIGURABLE_RAMSTAGE
is the overall variable controlling other options for minimizing the
ramstage.
MINIMAL_PCI_SCANNING is how we indicate we wish to enable minimal
PCI scanning.
Some devices must be scanned in all cases, such as 0:0.0.
To indicate which devices we must scan, we add a new mandatory
keyword to sconfig
It is used in place of on, off, or hidden, and indicates
a device is enabled and mandatory. Mandatory
devices are always scanned. When MINIMAL_PCI_SCANNING is enabled,
ONLY mandatory devices are scanned.
We further add support in src/device/pci_device.c to manage
both MINIMAL_PCI_SCANNING and mandatory devices.
Finally, to show how this works in practice, we add mandatory
keywords to 3 devices on the qemu-q35.
TEST=
1. This is tested and working on the qemu-q35 target.
2. On CML-Hatch
Before CL:
Total Boot time: ~685ms
After CL:
Total Boot time: ~615ms
Change-Id: I2073d9f8e9297c2b02530821ebb634ea2a5c758e
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Update the QUP DFSR cmd to clear the SW control and also update the perf
registers when M is set. While at it also update the d_2 values.
Tested: validated DFSR clock configuration and M/N/D values.
Change-Id: I6bba1c6f99810963aaa607885ef400c523c0e905
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Developer/Reviewer, be aware of this patch from Mistral:
https://review.coreboot.org/c/coreboot/+/33425/18
Change-Id: I020d1e4d4f5c948948e1b39dd18af1d0e860c279
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add golang and libelf-dev so LinuxBoot can be built from the
coreboot-sdk docker container.
BUG=N/A
TEST=build
Change-Id: I7a156fc24a6040d73467e06c16139bf298a29740
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38751
Tested-by: Martin Roth <martinroth@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Enabling an assertion in vb2_member_of() results in coreboot
linking vb2ex_abort() and vb2ex_printf() in ramstage.
Move these two functions from vboot_logic.c to vboot_lib.c,
which is should be enabled in all stages if CONFIG_VBOOT_LIB
is enabled. Note that CONFIG_VBOOT_LIB is implied by
CONFIG_VBOOT.
Relevant vboot_reference commit: CL:2037263.
BUG=b:124141368, chromium:1005700
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ica0103c5684b3d50ba7dc1b4c39559cb192efa81
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Wait for HPD DP unless HDMI is plugged.
Some Type-C monitors do not immediately assert HPD. If we continue
to boot without HPD asserted, Depthcharge fails to show pictures
on a monitor even if HPD is asserted later.
Similar to that of b:72387533 however our DP&HDMI are beind a MST.
See commit d182b63347 on how this was done for mainboard/fizz.
BUG=b:147992492
BRANCH=none
TEST=Verify firmware screen is displayed even when a type-c monitor
does not immediately assert HPD. Verify if HDMI monitor is connected,
AP does not wait (and firmware screen is displayed on HDMI monitor).
Change-Id: I19d40056e58f1737f87fd07d62b07a723a63d610
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
The type of dev in the PCI_FUNC(dev) is incorrect. Fix it using
PCI_DEV2DEVFN() macro. Tested on a T440P, and necessary on this board
to enable the dGPU.
Change-Id: I3fb0f677cc98800f355f6af7d3172be3e59ce5c2
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38722
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The STM support aligns the smm_save_state_size. However, this creates
issue for some platforms because of this value being hard coded to
0x400
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: Ia584f7e9b86405a12eb6cbedc3a2615a8727f69e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38734
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PC Engines apu2 platform uses AGESA 1.0.0.4, because upstream AGESA
1.0.0.A doesn't work on apu2 - the platform doesn't boot. To properly
utilize AGESA 1.0.0.4 we need to adjust AGESA header to state, which
is compatible with AGESA 1.0.0.4 version.
Cut out the changes introduced in CB:11225 exclusively for apu2 board.
TEST=boot PC Engines apu2 and launch Debian Linux
Change-Id: I3d85ee14e35dae8079e8d552b6530a3867f65876
Signed-off-by: Piotr Kleinschmidt <piotr.kleins@gmail.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Enable acoustic noise mitigation, the slow slew rates are fast time divided by 8
and disable Fast PKG C State Ramp (IA, GT, SA).
BRANCH=hatch
BUG=b:143501884
TEST=build and verify that noise reduce.
Change-Id: I65f47288a7b1da98296fdba87ab5ca0c3a567aaf
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38212
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change-Id: I5f053c1270bab71aeab3bb785c60417419736b44
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This update is a combination of all four of the patches so that the
commit can be done without breaking parts of coreboot. This possible
breakage is because of the cross-dependencies between the original
separate patches would cause failure because of data structure changes.
security/intel/stm
This directory contains the functions that check and move the STM to the
MSEG, create its page tables, and create the BIOS resource list.
The STM page tables is a six page region located in the MSEG and are
pointed to by the CR3 Offset field in the MSEG header. The initial
page tables will identity map all memory between 0-4G. The STM starts
in IA32e mode, which requires page tables to exist at startup.
The BIOS resource list defines the resources that the SMI Handler is
allowed to access. This includes the SMM memory area where the SMI
handler resides and other resources such as I/O devices. The STM uses
the BIOS resource list to restrict the SMI handler's accesses.
The BIOS resource list is currently located in the same area as the
SMI handler. This location is shown in the comment section before
smm_load_module in smm_module_loader.c
Note: The files within security/intel/stm come directly from their
Tianocore counterparts. Unnecessary code has been removed and the
remaining code has been converted to meet coreboot coding requirements.
For more information see:
SMI Transfer Monitor (STM) User Guide, Intel Corp.,
August 2015, Rev 1.0, can be found at firmware.intel.com
include/cpu/x86:
Addtions to include/cpu/x86 for STM support.
cpu/x86:
STM Set up - The STM needs to be loaded into the MSEG during BIOS
initialization and the SMM Monitor Control MSR be set to indicate
that an STM is in the system.
cpu/x86/smm:
SMI module loader modifications needed to set up the
SMM descriptors used by the STM during its initialization
Change-Id: If4adcd92c341162630ce1ec357ffcf8a135785ec
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: ron minnich <rminnich@gmail.com>
Follow HW change to use GPP_D15 as TS_RST. And change GPP_B21 from pltrst
to deep in order to met power off timing.
BUG=b:143733039
TEST=Check touch screen is functional in s0 and resume from s0ix
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ieec7eb78a05e653f271e348ed11f7e31c08bd5dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38665
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We set MPS to speed_to_default_mps(speed) initially
but later compare maxpacketsize with 8 to change mps.
So compare with speed_to_default_mps(speed) to determine
if we need to change settings here.
BUG=b:147783572
BRANCH=none
TEST=works with 12Mbps/8MPS USB device
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I32455483fceec56f14af6118b77615c14b3f9f39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38556
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
1. Enable PCIe port for dGPU
2. Change WLAN PCIe port from port 14 to port 7
BUG=b:147249494
TEST=Ensure dGPU and WLAN shows up with lspci.
Change-Id: Iea3292be7d8029c35847118228bbb773418632a1
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38399
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TGL FSP does pin mux for ISH related to pins by UPD(PchIshSpiEnable,
PchIshUartEnable, PchIshI2cEnable, PchIshGpEnable) but as default UPD
value is disabled, FSP doesn't do pin mux. So pin mux for ISH in gpio.c.
Pin mux for ISH for TGLRVP
ISHUART0: GPP_D13, GPP_D14 as NF1
ISHI2C0: GPP_B5, GPP_B6 as NF1
ISHGPIO0-7: GPP_D0~D3, GPP_D17~D18, GPP_E15~E16 as NF1
BUG=none
BRANCH=none
TEST=Build and boot to OS and check pinctl driver to check pin mux.
Check ISHUART0, ISHI2C0, ISHGPIO0-7 native function setting.
They should be NF1.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I1a9ba3a713527f5ce962659960418cd0f37dd262
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This change adds support for allocating resources for PCI express hotplug
bridges when PCIEXP_HOTPLUG is selected. By default, this will add 32 PCI
subordinate numbers (buses), 256 MiB of prefetchable memory, 8 MiB of
non-prefetchable memory, and 8 KiB of I/O space to any device with the
PCI_EXP_SLTCAP_HPC bit set in the PCI_EXP_SLTCAP register, which
indicates hot-plugging capability. The resource allocation is configurable,
please see the PCIEXP_HOTPLUG_* variables in src/device/Kconfig.
In order to support the allocation of hotplugged PCI buses, a new field
is added to struct device called hotplug_buses. This is defaulted to
zero, but when set, it adds the hotplug_buses value to the subordinate
value of the PCI bridge. This allows devices to be plugged in and
unplugged after boot.
This code was tested on the System76 Darter Pro (darp6). Before this
change, there are not enough resources allocated to the Thunderbolt
PCI bridge to allow plugging in new devices after boot. This can be
worked around in the Linux kernel by passing a boot param such as:
pci=assign-busses,hpbussize=32,realloc
This change makes it possible to use Thunderbolt hotplugging without
kernel parameters, and attempts to match closely what our motherboard
manufacturer's firmware does by default.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: I500191626584b83e6a8ae38417fd324b5e803afc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35946
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The eltan verified_boot is using the vboot 2.1 data structures and code,
as well as the fwlib21 build target, they are all deprecated. Refer to
CB:37654 for more information.
The verified_boot code is updated to use the vb2 structures and code and
make sure only public functions are used.
BUG=N/A
TEST=build
Change-Id: I1e1a7bce6110fe35221a4d7a47c1eb7c7074c318
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
This define is used to set up the STM SMM Descriptor table tr entry.
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: Iddb1f45444d03465a66a4ebb9fde5f206dc5b300
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Originally a part of security/intel/stm.
Add get_pmbase to the intel platform setup code.
get_pmbase is used by the coreboot STM setup functions to ensure
that the pmbase is accessable by the SMI handler during runtime.
The pmbase has to be accounted for in the BIOS resource list so
that the SMI handler is allowed this access.
Change-Id: If6f6295c5eba9eb20e57ab56e7f965c8879e93d2
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37990
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add ClearControl Function which is needed for a follow-up patch.
Change-Id: Ia19185528fd821e420b0bdb424760c93b79523a4
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
With Audio DSP OSC qualification disabled from S0ix criteria.
S0ix is achieved before the DSP is suspended. When driver tries
to suspend DSP its already turned off.
BUG=b:139481313
Change-Id: I20b793b95483af03ce4ae068ac07864a9e90d39b
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37604
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch removes duplicate CPUID entry between KBL and CFL.
CFL-D0 has KBL CPU + CNP PCH hence no need to redefine same KBL
CPUID (0x806EA) for CFL-D0.
TEST=CFL-D0 report platform serial msg shows "Cofeelake D0" with
CPUID 0x806EA.
Change-Id: I078dd7860891896b512967dc8dec5dd94d069193
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
The current MP init timeout is hardcoded as 1s. To support
platform with many cpus, the timeout needs to be adjusted.
The number of cpus is calculated as:
number of sockets * number of cores per socket *
number of threads per core
How long the timeout should be set to, is heuristic.
It needs to be set long enough to ensure reboot stability,
but not unreasonable so that real failures can be detected
soon enough, especially for smaller systems.
This patch sets timeout to be minimum as 1 second, while each
cpu adds 0.1 second.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: Ibc079fc6aa8641d4ac8d8e726899b6c8d055052e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
The SMBus support is identical between stoneyridge and picasso.
Unify on common support code.
Change-Id: Ic3412c5ee67977a45c50b68f36acc45c3d560db5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Set HeciEnabled = 1 on puff device tree to turn on
Intel ME communication interface.
BUG=b:143232330
BRANCH=None
TEST=Build puff and boot up OS.
ran lspci and confirmed there is a HECI device.
00:16.0 Communication controller: Intel Corporation Device 02e0
Change-Id: I2debb885022ae31e395869d014a91824b5dd980c
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
libpayload passes argc and argv to main(), and ignoring these arguments
causes a compile time error when using LTO.
Change-Id: I5d2b30158ebabe1d1534a9684874018483ad769b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38292
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id 6ef33b99:
2019-11-22 Hung-Te Lin futility: updater: refactor: unify
getting temp files for firmware images
to commit id 0e97e25e:
2020-01-23 Julius Werner 2lib: Fix struct vb2_hash the way it was
meant to be
Change-Id: I539aba2f283804f67ff3ff4f98324b3d10b2bb54
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
According to the C standard, accessing the NULL pointer (memory at
address zero) is undefined behaviour, and so GCC is allowed to optimize
it out. Of course, accessing this memory location is sometimes
necessary, so this optimization can be disabled using
-fno-delete-null-pointer-checks. This is already done in coreboot, but
adding it to xcompile will also disable it for all the payloads. For
example, coreinfo compiled with LTO libpayload crashes when this flag
isn't set, presumably because the compiler is optimizing something out
that it shouldn't.
Change-Id: I4492277f02418ade3fe7a75304e8e0611f49ef36
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38289
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
acpi_device_scope() will return NULL if it is unable to find the path
of the parent device. Return early if this is the case to prevent a null
pointer dereference.
Change-Id: I3eff1c1e3477c75c7130b52898de7d59692ba412
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1409672
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38669
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is found that keyboard backlight in T440p is enabled by clearing
bit 3 of EC RAM 0x01. This patch sets has_keyboard_backlight in
devicetree.cb and also corrects the CMOS configuration.
Change-Id: Ib4c2b1591d26e2bb33f9549e3933efe9a6e0b043
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Dennis Witzig <dennis@wtzg.de>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Eric Lai