This commit is adding a dependency check for the FSP_USE_REPO
config option which so far was not able to deal with IceLake
systems.
Change-Id: I29faa8d3acff5680b611951fc193d33f514dc0d3
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37561
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The name for the CoffeeLake FSP.fd was changed to Fsp.fd.
Therefore the CoffeLake / WhiskeyLake default path was
changed.
Change-Id: I0f51e378fcaacb25392d8940a342fc968c730157
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37564
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit creates a foob variant for Octopus. The initial settings
override the baseboard was copied from variant phaser.
BUG=b:144890301
BRANCH=octopus
TEST=emerge-octopus coreboot
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: Ibcdda4dd0846612f5e98ab454db7144c1caf0507
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37456
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We are already in documentation so it should be obvious that other
links point to other documentation.
Change-Id: I7a021a09bdb88418ec85dbf433465f26445057d0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Some return codes were missed when implementing this initially; the vboot
logic can require the system to command the EC to reboot to its RO, switch
RW slots or it can require a poweroff of the SoC. This patch appropriately
handles these return codes.
BUG=b:145768046
BRANCH=firmware-hatch-12672.B
TEST=ODM verified this patch fixes the issues seen.
Change-Id: I2748cf626d49c255cb0274cb336b072dcdf8cded
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Change the hex values in the VR configuration tables of the Intel Kaby
Lake RVP boards to the same style that is used in the other mainboards.
Also, correct some numbers in the comment tables that did not match the register values.
The values in the tables haven't changed.
BUG=N/A
TEST=build
Change-Id: I77af544d7d88143e19abedb12a13627779c705c6
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37550
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set the SMBIOS system type to detachable for nocturne and
soraka variants, to allow the OS to correctly process events.
Change-Id: Ie0ee5ea6666542c0bca2c264b2ed2e6135b78658
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Because the function is implemented in C, post_code() calls
from cache_as_ram.S and other early assembly entry files may
not currently work for cold boots. Assembly implementation
needs to follow one day.
This effectively removes PORT80 routing from boards with
ROMCC_BOOTBLOCK.
Change-Id: I71aa94b33bd6f65e243724810472a440e98e0750
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Prepare for an implementation supporting the reset vector in RAM and
not the traditional 0xfffffff0. Add a Kconfig symbol that can be used
in place of hardcoded values.
Change-Id: I6a814f7179ee4251aeeccb2555221616e944e03d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The board is booting Linux and has been briefly tested.
SeaBIOS, TianoCore payload and Linux as payload all seem to work fine.
BUG=N/A
TEST=tested on Facebook Monolith
Change-Id: I65a2e03334af65cfb3f825d43fa0daa6e6c75913
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Add support for the FSP feature to display the logo.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: Iaaffd2be567861371bbe908c1ef9d7dde483a945
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
On embedded boards the cpu mounted on the board is known. So it is not
required to include microcode for all possible Sky Lake and Kaby Lake
cpus. This patch provides the possibility to only support the versions
required.
By default all microcode updates will be included and the versions not
required can be removed using Kconfig.
BUG=N/A
TEST=build
Change-Id: Iaa36c2846b2279a2eb2b61e6c97d6c89d0736f55
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The code in cpu/x86/lapic/apic_timer.c for timer_monotonic_get()
is not SMP safe as LAPIC timers do not run as synchronised as TSCs.
The times reported for console for boot_states does not accumulate
from APs now. Also remove console time tracking from ENV_SMM.
Change-Id: I1ea2c1e7172f8ab3692b42dee3f669c5942d864a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37398
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TEST=Set MAX_CPUS=2 and run qemu with -smp 2
Signed-off-by: Philipp Hug <philipp@hug.cx>
Change-Id: I94fb25fad103e3cb5db676eb4caead11d54ae0ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Xiang Wang <merle@hardenedlinux.org>
gcc seems to have some stupid problem with deciding when to inline byte
swapping functions (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92716).
Using the compiler builtin instead seems to solve the problem.
(This doesn't yet solve the issue for the read_be32()-family of
functions, which we should maybe just get rid of at some point?)
Change-Id: Ia2a6d8ea98987266ccc32ffaa0a7f78965fca1cd
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
factory_initialize_tpm() calls secdata_xxx_create() (for both firmware
and kernel space) and then immediately writes those spaces out to the
TPM. The create() functions make vboot think it just changed the secdata
(because it reinitialized the byte arrays in the context), so we also
need to clear the VB2_CONTEXT_SECDATA_xxx_CHANGED flags again, otherwise
vboot thinks it still needs to flush the spaces out to the TPM even
though we already did that.
Also clean up some minor related stuff (VB2_CONTEXT_SECDATA_CHANGED
notation is deprecated, and secdata space intialization should use the
same write-and-readback function we use for updates).
Change-Id: I231fadcf7b35a1aec3b39254e7e41c3d456d4911
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Going forwards, vb2ex_commit_data will be used to flush both
nvdata and secdata.
The patch that is circularly dependent on this lies between a patch that
makes vboot no longer build and the patch that fixes that, so we have to
pull the whole thing in at once to sort out the mess.
Updating from commit id 1c4dbaa0:
2019-11-18 Julius Werner Makefile: Fix typo for MOCK_TPM
to commit id 695c56dc:
2019-12-04 Julius Werner Makefile: Make loop unrolling fully
controllable by the caller
BUG=b:124141368, chromium:1006689
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ia2612da0df101cd3c46151dbce728633a39fada1
Signed-off-by: Joel Kitching <kitching@google.com>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
1. No gpio control in bootblock
2. Disable power and assert reset in ramstage gpio
3. Power on and then deassert reset at the end of ramstage gpio
4. Disable power and assert reset when entering S5
On "reboot", the amount of time the power is disabled for is
equivalent to the amount of time between triggering #4 and wrapping
around to #3, which is about 400ms on Kohaku.
Since #2 forces power off for FPMCU, S3 resume will still
not work properly.
Additionally, we must ensure that GPP_A12 is reconfigured as an output
before going to any sleep state, since user space could have configured
it to use its native3 function.
See https://review.coreboot.org/c/coreboot/+/32111 for more detail.
The control signals have been validated on a Kohaku in
the following scenarios:
1. Cold startup
2. Issuing a "reboot" command
3. Issuing a "halt -p" and powering back on within 10 seconds
4. Issuing a "halt -p" and powering back on after 10 seconds
5. Entering and leaving S3 (does not work properly)
6. Entering and leaving S0iX
BRANCH=hatch
BUG=b/142751685
TEST=Verify all signals as mentioned above
TEST=reboot
flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin
TEST=halt -p
# power back on within 10 seconds
flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin
TEST=halt -p
# power back on after 10 seconds
flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin
Change-Id: I2e3ff42715611d519677a4256bdd172ec98687f9
Signed-off-by: Craig Hesling <hesling@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch moves the common devicetree settings into baseboard and
creates overridetree.cb for each variant. For PCIe root port settings,
SATA, eMMC, I2Cs and GBe, they are in overridetree.
TEST=build an image for each variant
Change-Id: I067bdb3fcf1218b93e52801f6db093e24d7d2b62
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36794
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Definitions were moved so that now device/mmio.h needs to be included
instead of arch/mmio.h. Also, don't use le32 conversion.
This follows the activities of commit 55009af42 (Change all
clrsetbits_leXX() to clrsetbitsXX()) and commit 1c37157218 (mmio: Add
clrsetbitsXX() API in place of updateX()).
Change-Id: Ie3af0d4f0b3331fe5572fc56915952547b512db7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37534
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Over time our printk() seems to acquire more and more features... which
is nice, but it also makes it a little less robust when something goes
wrong. If the wrong global is trampled by some buffer overflow, it
suddenly doesn't print anymore. It would be nice to have at least some
way to tell that we triggered a real exception in that case.
With this patch, arm64 exceptions will print a '!' straight to the UART
before trying any of the more fancy printk() stuff. It's not much but it
should tell the difference between an exception and a hang and hopefully
help someone dig in the right direction sooner. This violates loglevels
(which is part of the point), but presumably when you have a fatal
exception you shouldn't care about that anymore.
Change-Id: I3b08ab86beaee55263786011caa5588d93bbc720
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37465
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To avoid trampling over interesting exception artifacts on the real
stack, our arm64 systems switch to a separate exception stack when
entering an exception handler. We don't want that to use up too much
SRAM so we just set it to 512 bytes. I mean it just prints a bunch of
registers, how much stack could it need, right?
Quite a bit it turns out. The whole vtxprintf() call stack goes pretty
deep, and aarch64 generally seems to be very generous with stack space.
Just the varargs handling seems to require 128 bytes for some reason,
and the other stuff adds up too. In the end the current implementation
takes 1008 bytes, so bump the exception stack size to 2K to make sure it
fits.
Change-Id: I910be4c5f6b29fae35eb53929c733a1bd4585377
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Arm CPUs have always had an odd feature that allows you to mask not only
true interrupts, but also "external aborts" (memory bus errors from
outside the CPU). CPUs usually have all of these masked after reset,
which we quickly learned was a bad idea back when bringing up the first
arm32 systems in coreboot. Masking external aborts means that if any of
your firmware code does an illegal memory access, you will only see it
once the kernel comes up and unmasks the abort (not when it happens).
Therefore, we always unmask everything in early bootblock assembly code.
When arm64 came around, it had very similar masking bits and we did the
same there, thinking the issue resolved. Unfortunately Arm, in their
ceaseless struggle for more complexity, decided that having a single bit
to control this masking behavior is no longer enough: on AArch64, in
addition to the PSTATE.DAIF bits that are analogous to arm32's CPSR,
there are additional bits in SCR_EL3 that can override the PSTATE
setting for some but not all cases (makes perfect sense, I know...).
When aborts are unmasked in PSTATE, but SCR.EA is not set, then
synchronous external aborts will cause an exception while asynchronous
external aborts will not. It turns out we never intialize SCR in
coreboot and on RK3399 it comes up with all zeroes (even the reserved-1
bits, which is super weird). If you get an asynchronous external abort
in coreboot it will silently hide in the CPU until BL31 enables SCR.EA
before it has its own console handlers registered and silently hangs.
This patch resolves the issue by also initializing SCR to a known good
state early in the bootblock. It also cleans up some bit defintions and
slightly reworks the DAIF unmasking... it doesn't actually make that
much sense to unmask anything before our console and exception handlers
are up. The new code will mask everything until the exception handler is
installed and then unmask it, so that if there was a super early
external abort we could still see it. (Of course there are still dozens
of other processor exceptions that could happen which we have no way to
mask.)
Change-Id: I5266481a7aaf0b72aca8988accb671d92739af6f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This includes USB QUSB2,QMP Phy and Controller support
And libpayload support for USB
Change-Id: I0651fc28dc227efbeb23eeefe9b96a3b940ae995
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This implements the SPI-NOR driver for the Qualcomm QSPI core.
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/27483/58
Change-Id: I2eb8cf90aa4559541ba293b3fd2870896bed20b7
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35501
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PCH uses the SRCCLKREQ# pin to detect PCIe device in the slot in
order to send clock signal to it. However, this logic is not required
for the Realtek LAN device, since this chip is soldered to the board
and always uses clocking. The chipset can't receive the clock request
signal (most likely this pin isn't connected) and doesn't enable the
CLK. For this reason, the device is broken during the initialization
phase. The patch disables clock request logic for the PCH PCIe port 6
to initialize the onboard LAN device correctly.
Change-Id: I5cbce6177c89052eb50959f43903b6f8a607e77f
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36377
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Elyes HAOUAS