Nicolas Reinecke was noticing that in my Lenovo T410s logs the GPIO*3
settings were missing. This led to some investigation and this patch, thanks!
Change-Id: I7ba28aa00d10f988a7fe81e61d2e216b54a11006
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/7239
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
e4e8e090fa does add support for QM57,
but there are many more that should work with that code(?).
Does not explode on...
CPU: Processor Type: 0, Family 6, Model 25, Stepping 2
Northbridge: 8086:0044 (1st generation (Westmere family) Core Processor)
Southbridge: 8086:3b0f (QS57)
Change-Id: I85e15ba45678a5bd635415a7a8d69c05bff8f7ef
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/3321
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
This adds the power management register definitions for Intel's Cougar
Point and Panther Point platform controller hubs (PCH). The definitions
are actually a subset of the older ICH10R registers: I've added just
those that are mentioned in the public specifications in [1] and [2].
I've tested dumping with an H77 PCH.
NM70 is missing in [1]. Therefore, I didn't add it here.
[1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet
Document-Number: 324645-006
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) -
Datasheet
Document-Number: 326776-003
Change-Id: Ia6945fe96cd96b568ed5191e91dbba5556e1ee95
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2985
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add support for dumping the MSRs on model_f2x and dumping GPIOs and PM
registers on ICH5. Add ICH5 and i865 to the supported chips list.
Enable the dumping of BAR6 on i865.
Sample output:
Disabling memory access:
$ sudo setpci -s 6.0 0x04.b=0x0
$ sudo ./inteltool -m | head -n 9
Intel CPU: Processor Type: 0, Family f, Model 2, Stepping 7
Intel Northbridge: 8086:2570 (i865)
Intel Southbridge: 8086:24d0 (ICH5)
============= MCHBAR ============
Access to BAR6 is currently disabled, attempting to enable.
Enabled successfully.
BAR6 = 0xfecf0000 (MEM)
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6197 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- pmbase is on southbridge function 3 on I82371XX
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Acked-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6128 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Both are tested and appear to be working, however I'm not 100% clear
on if the NM10 has any other PCI IDs.
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5709 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5632 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
while others dislike them being extra commits, let's clean them up once and
for all for the existing code. If it's ugly, let it only be ugly once :-)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
ICH6 Southbridge,
82915 Series Northbridge,
P4 6xx Series CPU
to inteltool
Tested on my Clevo D900T, based on ICH6 and i915P, with a p4 630
installed.
Signed-off-by: Pat Erley <pat-lkml@erley.org>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5469 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* PMBASE dumping now knows the registers.
* Add support for i965, i975, ICH8M
* Add support for Darwin OS using DirectIO
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3794 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
immensly when they know more systems / cpus / chipsets
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Martin Roth